Used Pressor P18 for sale (1,414)

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Hnodpfezu Aibsx Ah Set Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 400 kg, total length: 1,800 mm, total width: 700 mm, total height: 1,700 mm, power: 15 kW (20.39 HP), operating pressure: 16 bar, pressure (min.): 6 bar, pressure (max.): 16 bar, noise level: 62 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Highly efficient screw compressor with 15 kW / 16 bar specifically designed for the high demands of laser cutting, providing clean compressed air (also available with 22 kW) complete 4-in-1 unit frequency-controlled servo motor 500-liter pressure tank refrigerant dryer fine filter new machine, delivery time approximately 1 week We would be happy to demonstrate the machine to you at our facility. highly efficient, permanent magnet servo motor frequency-controlled / load-dependent for clean and dry compressed air suitable for laser applications with animated color display single-stage screw unit air-cooled durable and low-maintenance optional: also available with an additional adsorption dryer Sales are exclusively to commercial customers. Delivery / consultation / sales only in Germany / Austria. technical data (approx.): length: 1.75 m, height: 1.75 m, width: 0.72 m weight: approx. 420 kg pressure: 16 bar flow rate: approx. 1.7 m³/min at 10 bar (1.2 m³/min at 16 bar) Hnsdpfx Ajyll Ensh Set noise level: 62 ± 2 dB(A)

Condition: used, Year of construction: 2017, feed pressure / bar liter capacity / l Hsdpfx Ajxy S H Teh Ssnt Air consumption / m³/h

Condition: as good as new (ex-display), Year of construction: 2022, Kaeser screw compressor SM 13 - 11 bar exhibition piece at a special price Volume flow at 11.0 bar (g) 1.07 m³/min Hnedjvk R A Sopfx Ah Sot Electrical power consumption of the entire system at 11.0 bar (g) 9.63 kW Specific power 9.00 kW/(m³/min) Maximum overpressure 11.0 bar Drive motor efficiency at full load 91.7% Drive motor efficiency class IE4 Nominal drive motor power 7.5 kW Drive motor speed 2955 rpm Drive motor protection class IP 55 Electrical supply 400 V / 3 Ph / 50 Hz Compressed air outlet temperature above ambient temperature (at +20°C, 30% relative humidity) 8 K Sound pressure level 65 dB(A Compressed air connection G 3/4 Location: From stock 54634 Bitburg - available immediately -

Condition: good (used), Year of construction: 2008, operating hours: 4,731 h, functionality: fully functional, machine/vehicle number: 3829845, color: original, USED DENYO 1300CFM,185PSI AIR COMPRESSOR MODEL : DIS1300UB S#3829845 YEAR : 2008 Hnodpfx Ajvunwnoh Sjt HOUR : 4731

Condition: repair required (used), Year of construction: 2004, Schneider compressed air screw compressor defective Hnsdpfxevmivco Ah Sot System needs to be repaired. Machine is being sold cheaply because it needs to be repaired. Engine power: 11 KW Volume flow: 1500 liters/min Compressor pressure: 10 bar Location: from warehouse 54634 Bitburg Machine is being sold as defective Without guarantee - without warranty -

Condition: used, Year of construction: 2003, Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in its current condition as inspected -defective, not functioning, problem: frequency converter does not communicate with the software Hjdpfjhabk Dox Ah Sont -Delivery rate: 3.2-6.9 m³/min -Engine power: 18-24 kW -Structure: encapsulated -Max. pressure: 12.75 bar -Operating hours: 108252 h -Load hours: 30754 h -Year of manufacture: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Equipment: documentation/manual, refrigerant dryer, type plate available, We offer for sale a screw compressor with an integrated condensation dryer, type Aircraft / Fini A-K-Max 7.5-10-270 K (IE3), manufactured in 2021 by Aircraft. It is manufactured and marked according to CE standards (European conformity). The compressor has been used sparingly and regularly serviced, with documented operating history, including Czech operating and maintenance manuals. Technical parameters: Capacity: 1050 l/min, Maximum pressure: 10 bar, Tank size: 270 l, Dimensions: L: 1200, W: 680, H: 1540 mm, Weight: 280 kg, Electric motor power: 7.5 kW, Voltage: 400 V, Sound pressure level Lp 62 dB. The compressor is in very good technical condition and is ready for immediate use. It can be viewed at our warehouse in Přerov. Hjdpfxszy Spzo Ah Sent

Condition: excellent (used), Year of construction: 2012, ATLAS COPCO XAS87 COMPRESSOR, 5.00 m3, 12 bar!! DIESEL ATLAS COPCO XAS87 compressor, serviced. Technical data: Capacity: 5.00 m3/min; Operating pressure: 7 bar; Year of manufacture: 2012; Engine: KUBOTA Operating hours: 1397 h!!! The compressor is in full working order, ready for operation, and comes with a warranty. Hnodpfstyk Taex Ah Sst Net price: 32,500 PLN Gross price: 39,975 PLN Below is a link to a video showing the machine in operation.

Condition: excellent (used), Year of construction: 2002, PROD. KAESER TYPE CSD102T / 100304.0 S/N 1049 YEAR 2002 POWER (kW) 55 OUTPUT (m3/min) 10.1 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no Hnodpfx Aozwnykjh Sot BUILT-IN DRYER yes HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 2 NEW/USED USED

Condition: like new (used), Year of construction: 2026, functionality: fully functional, overall weight: 1,080 kg, total length: 2,200 mm, total width: 1,300 mm, total height: 2,100 mm, power: 22 kW (29.91 HP), Frequency-controlled screw compressor, 22 kW, 4-in-1 Hnjdpfx Ahozw A Tfo Sot With compressed air treatment for laser applications Attached refrigeration dryer Integrated 4-stage fine filter for clean, oil-free compressed air supply Working pressure -1.6 MPa (approx. 16 bar) Delivery rate 2.3 m³/min at 1.6 MPa Integrated pressure vessel, approx. 550 l

Condition: used, Technical specifications: Hnsdpfx Ahszvmris Sot Tank capacity: 500 L Flow rate: 950 l/min Max. pressure: 10 bar Number of pistons: 2 x 2 Power supply: 400 V Engine speed: 2800 rpm Engine power: 2 x 5.5 kW Overall dimensions: Length: 2100 mm Width: 600 mm Height: 1300 mm

Condition: excellent (used), Year of construction: 2013, overall weight: 403 kg, volume flow: 2.2 m³/h, operating pressure: 10 bar, pressure (min.): 10 bar, input voltage: 400 V, ATLAS COPCO GA 15 screw compressor Atlas Copco screw element 15 kW motor Hjdozxzvnjpfx Ah Ssnt Capacity: 2.20 m3/min Pressure: 10 bar Year of manufacture: 2018 Operating hours: 10412 hours Compressor in fully working condition.

Condition: good (used), For sale: a mobile Atlas Copco XAS 60 screw compressor with a Deutz F2L 511 diesel engine. The unit has only 613 operating hours since new. The engine is in very good condition – it starts easily and runs properly. The compressor was imported from Germany. It has not been used for about fifteen years, and the compressor's screw element has seized. We attempted to repair it, and the unit was reassembled, but it currently only generates a pressure of approximately 4 bar. For this reason, it is being sold as damaged, for further repair. It may be an interesting proposition for someone who will undertake the repair of the compressor, or as a source of parts, especially the well-maintained Deutz F2L 511 engine. Hodpfx Aezv Ei Hjh Sjnt Engine data: * Manufacturer: Deutz * Type: F2L 511 * Power: 25 kW / 34 HP * Speed: 2800 rpm * Operating hours: 613 hours * Engine is functional, starts and runs properly The visual condition is appropriate for the age of the unit – visible signs of use, storage, and localized corrosion.

Condition: good (used), Year of construction: 2005, operating hours: 50,000 h, functionality: fully functional, overall weight: 850 kg, Equipment: refrigerant dryer, Screw compressor, 22 kW, with built-in refrigerated dryer; disassembled but in good condition. Hodpezb Drxefx Ah Sent

Condition: good (used), Year of construction: 2002, functionality: fully functional, overall weight: 700 kg, The 30 kW screw compressor has been disassembled and is ready for shipment. Hjdpezb Dq Isfx Ah Sjnt

Condition: excellent (used), Kaeser DSD 238 compressor Hedpfjzbx Rcjx Ah Ssnt 132 kW Year: 2011 The compressor is water-cooled, making it ideal for dusty environments. Operating hours: 30,000 Unit and engine replaced in 2019 Well-maintained and in perfect working order.

Condition: used, Year of construction: 2005, operating hours: 39,119 h, functionality: unexamined, Equipment: refrigerant dryer, KAESER AIRTOWER 6 with Aquamat 2 Oil-Water Separator Under the name Kaeser Airtower 6 (often based on the SX 6 compressor stage), Kaeser offers a compact, ready-to-connect compressed air station that consists of a screw compressor and an integrated refrigeration dryer. Performance Data & Function Motor Power: 4.0 kW Flow rate (Delivery rate): At 8 bar operating pressure: approx. 0.49 m³/min (490 l/min) At 11 bar operating pressure: approx. 0.37 m³/min (370 l/min) Integrated refrigerated dryer function: Provides dry compressed air directly from the station (dew point +3 °C) Hnodpez Abp Aefx Ah Sot Control: Equipped with the electronic monitoring system, Sigma Control. The KAESER AQUAMAT 2 is a classic oil-water separator for legally compliant treatment of compressed air condensate from compressor systems.

Condition: excellent (used), Year of construction: 2002, operating hours: 1,11,219 h, functionality: fully functional, power: 180 kW (244.73 HP), volume flow: 1,734 m³/h, pressure (max.): 12.5 bar, type of cooling: air, Screw compressor, Atlas Copco GA180VSD Inverter integrated 180 kW 12.50 bar Hjdpfx Ahszxxvxo Sent 28.90 m3/min Year of manufacture: 2002 Operating hours: 111,219

Condition: as good as new (ex-display), Year of construction: 2026, Exhibit: Compressor Kaeser SM 10 (10 bar) Hnodpfx Ajipm Iyeh Sst with SIGMA CONTROL 2 Year of construction: 2026 Operating hours: 0,5 Bh Techn.Daten: Volume flow at 10 bar: 0.78 m³ / min Motor power: 5.5 kW Electrical connection: 400 V / 3/50 Hz Dimension W x D x H: 630 x 790 x 1100 mm Weight: 220 kg Connection compressed air: G 3/4 " Sound pressure level: 62 dB (A) Visit our store in Erlangen. On more than 450 square meters of exhibition space you will find a large number of used and new compressors

Condition: ready for operation (used), Year of construction: 2008, operating hours: 20,000 h, functionality: fully functional, 4 x Kaeser compressors, type DSD 238, with an average of 20,000 operating hours each. Inspection welcome in Bremerhaven. Hjdsz Ap Sxspfx Ah Sont Sale is B2B only – preferably all units together for self-dismantling.

Condition: excellent (used), Year of construction: 2019, operating hours: 2,092 h, functionality: fully functional, machine/vehicle number: IT J320209, overall weight: 447 kg, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, The compressor is in excellent condition!!! The electronics have been completely replaced!!! Only 2029 operating hours. Hodpfx Ahez Ah Uxs Sent For sale due to downsizing of the machine park!!!!...Completely overhauled, including filter replacement.

Condition: new, Year of construction: 2024, machine/vehicle number: 6913390001, hoku 113-90 – Robust compressors for professional use with V-belt drive and a high-performance 2-cylinder unit made of cast iron. The universal model with V-belt drive and high-quality components, specifically designed for tradespeople, for use in environments where the quality of compressed air, as well as durability and efficiency, are essential. Long service life thanks to high-performance units with low speeds, safe transport and excellent stability thanks to large wheels with a parking brake, optimal cooling through a large fan wheel, an aftercooler with cooling fins ensures a low tank inlet temperature and thus less moisture in the compressed air, improved efficiency through optimized units, standard equipment includes a Condor pressure switch, pressure gauge, pressure regulator with water separator and quick-release coupling, motor with overload protection. Hjdpfx Ahevl Euxs Sent Technical data: Intake capacity 500 l/min, delivery capacity 375 l/min, maximum pressure 10 bar, tank capacity 90 l, cylinders/stages 2/1, speed 1,300 min-1, motor power 3 kW / 400 V Ex works, from the Seevetal location, excluding transport, as inspected, subject to prior sale.

Condition: new, Year of construction: 2025, machine/vehicle number: 10027619, Piston compressor with intake capacity of 620 l/min, delivery capacity at 6 bar of approx. 520 l/min, maximum pressure of 10 bar, tank capacity of 270 l, 2 cylinders with 2 stages, speed of 920 rpm, 400 Volt, 50 Hz, 4 kW motor with Condor pressure switch and pressure gauge, including pre-filter, desiccant dryer (230 Volt), automatic tank drain (230 V), and oil/water separator, bolted onto a safety base pallet Hjdpewgcb Defx Ah Ssnt with rubber vibration dampers, immediately available, Ex Works, from the Seevetal location, excluding transport, subject to prior sale.

Condition: ready for operation (used), For sale: original Hanomag R35/45. Please submit your offer! Drives well, has no oil leaks, MOT is expired but can be renewed at additional cost. Price negotiable. The vehicle was always stored indoors. Now available for sale. Year of manufacture: 1956, with rare features and a functional Roots blower increasing output to approx. 45 hp. This machine is a technical one-off and is in very good, working condition. Equipment & details: • Type: R35/45 A (agricultural tractor version) • Engine: 4-cylinder diesel engine with mechanically driven Roots blower. Many original stickers and type plates on the machine. Output: approx. 45 hp • Transmission: 5 forward gears + 1 reverse, plus additional reduction (total 10 gears) • Year: 1956 • Rare: Front auxiliary PTO/extra PTO shaft via separate lever • Runs, steers and brakes flawlessly, starts reliably Condition: • Very good overall technical condition • Original appearance with lovely patina • Complete dashboard, inscriptions, lighting, etc. No improvised repairs – all mechanically robust • Ideal as a collector’s item, for vintage meetings or for enthusiasts. Rarity & value: • The Roots blower was only installed in a few models or by Hanomag authorized workshops for power increase. • Such authentic vehicles with working blower and special equipment are extremely rare. Subject to errors. Pictures/description may vary. Hnedpfswvf E Djx Ah Sot