5,5 kW screwcompressor 10 bar

KAESER SM 10

Condition: excellent (used), Year of construction: 2022, MANUFACTURER: KAESER MODEL: AIRCENTER SM10 SERIAL NUMBER: 1255 Crjdpfxsy E Sggj Aa Njb YEAR: 2022 POWER (kW): 5.5 CAPACITY (m3/min): 0.9 PRESSURE (bar): 8 OPERATING HOURS (DOC./TOTAL): FREQUENCY INVERTER: no BUILT-IN DRYER: yes, R513a 0.39kg HEAT EXCHANGER: no COOLING (AIR/WATER): air ON TANK: yes, 270L DOCUMENTS: no CONNECTION: 1 NEW/USED: used

Condition: used, Year of construction: 1997, - edge banding unit - Cross-cutting unit - Milling unit - Fine trimming unit - scraper - buffing unit Codpfsd Inktjx Aa Nerb

Condition: like new (used), Year of construction: 2024, operating hours: 359 h, functionality: fully functional, machine/vehicle number: 1384 - 10024378, overall weight: 295 kg, total length: 1,090 mm, total width: 630 mm, total height: 1,100 mm, motor manufacturer: Super Premium Efficiency IE4, IP55, power: 5.5 kW (7.48 HP), fuel type: electric, volume flow: 56.4 m³/h, operating pressure: 7 bar, pressure (min.): 7 bar, pressure (max.): 8 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, noise level: 62 dB, protection type (IP code): IP54, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, For sale is a Kaeser Aircenter SM 10 screw compressor in very well-maintained condition with low operating hours. The unit is a compact, ready-to-use compressed air station featuring an integrated refrigeration dryer (ABT15) and an oil separator with pressure gauge, making it ideal for industrial applications and workshops. The system received its initial and scheduled maintenance in December 2025. All documentation and paperwork are available. The compressor is immediately operational and can be inspected under power by arrangement. Crodpoyvkamjfx Aa Nob

Condition: excellent (used), functionality: fully functional, General information: Oil-lubricated screw compressor for compressed air supply. Technical data: Drive motor: 5.5 kW Max. operating overpressure: 8.0 bar Rated speed: 2950 rpm Operating voltage: 400 V, 3-phase, 50 Hz Rated current: 14 A Ambient temperature: 3–45 °C Option: K1_T2_C48 Refrigeration dryer: Model: ABT 15 Material no.: 1.8102.5 Max. operating overpressure PS: 16 bar / 230 psig Compressed air inlet temperature: 3–60 °C / 37–140 °F Ambient temperature: 3–45 °C / 37–115 °F Crsdpfx Aasxzuhcj Neb Refrigerant system: Refrigerant: R-513A Quantity: 0.35 kg / 0.77 lb Global warming potential (GWP): 631 CO₂ equivalent: 0.221 t / 487 lb Max. operating overpressure HP PS: 21 bar / 300 psig Max. operating overpressure LP PS: 16 bar / 230 psi No options

Year of construction: 2005, condition: like new (used), Quality used Bystronic Pr 100 8axis cnc pressbrake for sale BYSTRONIC PR100 x 3100 100 ton x 3100mm 8 Axis CNC Hydraulic Down stroke Press Brake complete With Cybelec Modeva 10S Control. Manufactured 2005 – fully serviced with Bystronic uk from new Specification Credpfxshufktj Aa Nsb Year of Manufacture /new 2005 Control Cybelec Modeva 10S Back gauge Programmable Guards Fiessler AKAS Capacity 100 Ton Maximum length of bend 3100mm / 3metre Extended Daylight – to be confirmed Max stroke 315mm Rapid approach 180mm/s Bending cycle 10mm/s Rapid return 150mm/s Tooling top and bottom Wander type footswitch Total 8 axis Y1,Y2,X1,X2,R1,R2,Z1,Z2 – 6axis back gauge Hydraulic Crowning We can quote for delivery and installation complete with operator training We can advise and supply brand new tooling to produce your sheet metal products on this cnc press brake

Condition: like new (used), Year of construction: 2019, Ref: 11072 . 2019 Horizon RD-4055 Dual Cylinder Rotary Die Cut System Like new, ex demo condition - ONLY 5,000 on the counter! Efficient production with new separator and card stacker for labour saving operation. Features: • Die cutting, waste separation and stacking in one pass for efficient production. • A wide range of applications can be processed such as business cards, greeting cards, labels and light packages. • Maximum 6,000 sheets can be processed. • 21-up round corner business card production can processed at 126,000 cards per hour. • Simple and easy operation without relying on a skilled operator. • Uniquely designed servo motor controlled ‘Repeat-cut’ feature allows multiple-up cuts from a single up die to minimize die cost. • Ruggedly constructed yet compact compared to normal die cutters. • Various delivery options are available to process a wide range of applications. • Die-cutting and Kiss cutting can be performed simultaneously by using a die which has two different blade heights, ideal for making stickers and labels. • Creasing can be achieved to avoid image cracking. Suitable for boxes, pocket folders and greeting cards which require additional folding processes after die cutting. • Repeat-cut enables the running of multiple up imposed applications with a smaller die to reduce die cost (Up to 8 repeats) Equipped with: TOUCH PANEL: Both setup and control can be done through the intuitive touch screen. After mounting the upper and lower die, the system can be set up by simply inputting sheet size and product size. The graphical illustrations on the screen are simple and easy to understand. FEED SECTION: Vacuum belt feeding enables superior feeding with easy setup and operation. An ultrasonic sensor is used for double feed detection on a wide range of substrates. The optional code reader BR-N4055 enables job separation for easy handling. TRANSPORT SECTION: Sheets are registered by vacuum belt and position is firmly secured with gripper rollers for accurate and consistent register. Servo motor driven gripper rollers ensure the die cut position without effecting processing speed. The optional alignment detection sensor ADS-N4055 detects the alignment error for additional quality control. DIE CUTTING SECTION: Rigid magnetic upper roller and solid lower anvil cylinder ensure high quality die cutting. Uniquely designed die cutting section enables easy and quick die setting. Crjdeymmqzepfx Aa Nsb Specification: Sheet Size (Before processing): Max. W400 x L550 mm or W15.740" x L21.650" Min. W200 x L275 mm or W7.875” x L10.830” Processed Material: Normal paper, Coated paper, Cardboard Material Thickness: 127.9 to 400 gsm Die Cutting: Max. 0.5 mm or 0.019” (In case of blade height: 0.8 mm or 0.031”) Max. 0.3 mm or 0.011” (In case of blade height: 0.6 mm or 0.023”) Creasing: Max. 0.4 mm or 0.015” (In case of blade height: 0.8 mm or 0.031”)

Condition: used, Year of construction: 2008, Decorate Barbie House GL 18 Closure for medicament flat GL18 Crjdsdqbzqopfx Aa Neb Injection form with 10-speed

Condition: excellent (used), Year of construction: 2008, operating hours: 9,000 h, laser power: 4,400 W, Used very clean Bystronic Bystar 3015 4.4kW for sale / flat bed industrial cnc laser for sale Bystronic ByStar 3015 4.4kW Cjdpfx Aasr Hcmrj Njrb BRAND: BYSTRONIC YEAR: 2008 MODEL: ByStar 3015 APPLICATION TYPE: LASER CUTTING LOCATION: UNITED KINGDOM MACHINE TYPE: LASER CUTTING MACHINES (CO2) Fully Serviced and Well Maintained CONTROL UNIT BRAND: BYSTRONIC Technical Information BRAND: BYSTRONIC LASERPOWER: 4.4KW / 4400 watts LASER TYPE: CO2 LASER BRAND: BYLASER 4400 MOVEMENT X-AXIS MOVEMENT: 3000 MM Y-AXIS MOVEMENT: 1500 MM Machines hours: Cut hours: 9,000 ADDITIONAL EQUIPMENT – BYPOS – CUT-CONTROL – 2 CUTTING HEADS (5″, 7.5″)

Year of construction: 2007, condition: good (used), Used 4.4kw Bystronic Byspeed CNC laser for sale Used Bystronic 4.4kw lasers for sale VIDEO BELOW: Byspeed 3015 4.4kw Installed new/year: 2007 Manufacturer: Bystronic Model: Byspeed 3015 Sheet size: 3metre x 1.5metre / 3000mm x 1500mm Laser power: 4.4kw / 4400 watt Cedjgwa Swjpfx Aa Nerb Control: ByVision CNC02 Automation n/a Year: 2007 Condition: good working condition / service from new Byspeed 3015 4400w March 2010 Power on: 44,189 hrs Cut time: 20,490 hrs Good condition machine that has been covered from new by service contract with Bystronic UK. Options Included: Bypos automatic focus CutControl 2 cutting heads Tools and accessories Torit Dust collector Delivery, installation and tuition available at extra cost.

Condition: excellent (used), Year of construction: 2008, operating hours: 87,000 h, functionality: fully functional, overall weight: 775 kg, total length: 1,770 mm, total width: 900 mm, total height: 1,530 mm, fuel type: electric, volume flow: 190 m³/h, operating pressure: 8 bar, pressure (max.): 10 bar, noise level: 68 dB, type of cooling: air, Equipment: refrigerant dryer, Manufacturer: Kaeser ASD 32T screw compressor + refrigerant dryer serviced throughout!!! complete documentation Year of construction: 2008 Nominal pressure: 8 bar air flow: 3.16 m3/min air flow: 189.6 /hour operating hours: Refrigeration dryer: ABT60 Compressed air connection: G 1¼ Voltage: 400V/3PH, 36A Codpfxoi E H Ike Aa Nsrb Power: 18.5 kW engine speed: 2945/min Ambient temperature: 3 / 45°C machine weight: 745 machine dimensions: 1,770 x 900 x 1,530 mm