Used Rittal Sv3431.030 for sale (103)

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 400 t, Hydraulic 400 to column press suitable for continuous shift operation, with these basic data: a) Closing speed 100 - 450 mm/sec. b) Opening speed 50 - 250 mm/sec ( adjustable via touch screen ) c) Pressing speed 5 - 60 mm/sec ( adjustable via touch screen ) d) Piston accumulator with approx. 4 nitrogen bottles e) Table size (clamping surface) 2700 x 1700mm ( seen from the front, between the columns ) f) Total table size 3400 x 1700mm g) 28 T-slots according to customer requirements h) Table, ram and press head are annealed stress-free. i) column diameter 250 mm j) slide size 3400 x 1700mm (clamping surface 2700 x 1700mm ) k) Total size of the machine approx. 3900 x 2200 ( at the bottom ) x 5700 mm height l) Oil temperature monitoring ( adjustable via touch screen ) m) Automatic lubrication ( adjustable via touch screen ) n) Free positioning of the ram ( adjustable via touch screen ) o) KEYENCE light barriers 14 mm on front and rear side p) Circuit oil cooling ( adjustable via touch screen ) q) Pressure holding valve 0 to 600 sec. ( adjustable via touch screen ) r) Table top size 3400 x 1700mm, plane milled s) Laterally monitored doors, 1200mm high, 1000mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m from the press u) Pressure setting from 50 to 400 tons ( adjustable via touch screen ) v) Travel limitation optionally via pressure or position w) Programming mode, set-up mode, single stroke + continuous stroke (adjustable via rotary switch ) Djdpfxeg Iihwe Aa Nskl x) Swivelling control panel with 15 inch touch screen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed ( SIEMENS S 7 1500 ) aa) Machine body primed and painted bb) assembly, commissioning, instruction against separate charge The hydraulics of the presses we offer are completely based on BOSCH-REXROTH/Parker/HAWE components. In the switch cabinet only components are used (SIEMENS) which are easily available in Germany. The safety technology comes completely from SICK except for the light barriers. The control system is supplied by SIEMENS. ( S 7 1500 ) as well as the touch screen monitor with 15 inch. The SIEMENS remote maintenance unit SECOME -Ethernet is included in the scope of delivery. SPECIAL FEATURE: the design chosen by us with two press cylinders and the piston accumulator make it possible to supply the full power with a main motor of 90 kW. Below under 1.3 the technical details Technical data Press design Press design Column press Thermally neutral 80 - 120 °C Number of operating sides 2 sides Forces Pressing force max. 4,000 kN Free ripping force max. 600 kN Pressure build-up time Closed tool steel to steel Max. 2 sec. Dimensions - intended minimum tool height 600 mm Max. Opening width 1600 mm Stroke and min. opening 1000/600 mm Table height above floor 820 mm Height above floor (headroom) approx. 5700 mm Hall height min. 7000 mm Parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.17 mm/m Weight Total weight of the press without operating materials approx. 52 To Speeds ( see attached cycle diagram ) Fast closing 100 - 450 mm/s Pressing speed At F max.

Year of construction: 2005, condition: good (used), Schrack 300 kvar Reactive power compensation equipment Manufacturer: Schrack Energietechnik Type: KRSMO-P-TS-25/12 Fi 7% Nominal power: 300 kvar Rated voltage: 400 V Nominal frequency: 50 Hz Rated current: 432 A Reactive power control relay: Frako RM9612 Dodpfx Aaok D Dxbo Nskl Rittal electrical switch cabinet: Freestanding with built-in fan. Manufacturer: Rittal Type: TS8806 Dimensions: 610x830x2000 mm

Condition: used, Year of construction: 1982, Technical details: Dodpowtctyofx Aa Njkl faceplate diameter: 2600 mm turning diameter over support: 2500 mm turning length: 450 mm centre distance: 1600 mm turning diameter over bed: 2900 mm spindle bore: 100 mm revolution per minute: gear steps U/min feed range: Überdrehen 0,12-31,5 Plandrehen 0,12-45 mm/min bed guideways length: 2900 mm max. workpiece weight between centres: 400.000 kgs total power requirement: 45 kW weight of the machine ca.: alle Komponenten zusammen: ca. 29,0 t machine dimensions LxWxH: 5.2 x 5,0 x 3,1 m 3-way measuring system with digital display RSF electronics Control panel Cooling unit for Rittal electric cabinet *

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 34,797 h, machine/vehicle number: 2011-0250, pipe diameter (max.): 600 mm, pipe length (max.): 1,500 mm, bending angle (max.): 180 °, bending radius (max.): 200 mm, wall thickness: 3 mm, Original machine year: 1996. In 2011, fully overhauled by the manufacturer for approx. EUR 250,000: electrical and mechanical components extensively renewed. TECHNICAL DETAILS Tube diameter: 16 – 60 mm Wall thickness: max. 3.0 mm Bending radius: 20 – 200 mm Tube feed length: 1,500 mm Bending angle: max. 180° + spring-back Tube length: 400 – 1,500 mm Tube outside diameter: 28 mm – 60 mm Material specifications Tensile strength stainless steel: max. 750 N/mm² Tensile strength mild steel: max. 450 N/mm² Capacity (steel): Ø 60 x 3 mm Capacity (stainless steel): Ø 57 x 2 mm Axes/Movements Bending direction: left Bending speed (forward): max. 22.0 rpm (infinitely variable) Bending speed (return): constant 22.0 rpm Rotational positioning: max. 360° Rotational speed: 50 rpm Multi-radius height adjustment: lowest tube center 55 mm Height travel: suitable for 3-groove bending tools MACHINE DETAILS Overrun time: 125 ms Machine weight: approx. 8.0 t Machine dimensions (L × W × H): 6,300 × 3,300 × 1,900 mm Dkedpfjx Srklsx Aa Njl Control cabinet (L × W × H): 2,700 × 700 × 2,000 mm Control console (L × W × H): 900 × 600 × 1,850 mm Tube magazine (L × W × H): 1,800 × 2,400 × 1,750 mm Operating hours: approx. 34,797 h Performance data Total power requirement: 55 kW Hydraulic oil volume: 340 l Control Bending planes: up to 6 (CNC programmable) Positioning device: NTB configuration Control unit: Schwarze-Robitec operation and control console FEATURES - Automatic cold tube bending machine - Tube positioning device - Gripper - Schwarze-Robitec tube magazine - Hydraulic operation for bending table, tool clamping, sliding rail, mandrel retraction, reinforced sliding rail feed and retraction - Various bending tools for Ø 60 mm tubes - Various accessories - Control cabinet cooling unit - Dual foot switch - Schwarze-Robitec control console - Rittal control cabinet cooling unit, type SK 3361100 Note: Machine could only be tested in setup mode due to lack of operating know-how. No faults are known. The machine is currently disassembled.

Condition: good (used), Year of construction: 2017, suction capacity: 16,600 m³/h, negative pressure: 5,600 Pa, Dust extraction, welding fume extraction, patron filter self-cleaning, pneumatic, vacuum for plasma, laser, sandblasting, soda blasting, shot blasting and all kinds of dry dust. Dkjdpfxsttah Ue Aa Njl The filter is cleaned pneumatically by pulses of compressed air during operation, which makes the device highly efficient. Fan on the clean side which reduces the risk of explosion to a minimum. Brand: Donaldson Torit DCE Model: DFO4-24 Year of production - 2017 Cartridge filter cartridges, oval - DFO ULTRA-WEB FR - 24 pieces Filtration area of 430 m2 45 Kw fan. Fan model : ART 631 N4T Built-in frequency converter and RITTAL SK 3305540 control cabinet air conditioner. Capacity 16600 m3/h Inlet diameter - 1 x 350mm , 2 x 300 mm Dust emptying cell sluice. Comes with a silencer and technical and electrical documentation. Also on offer on request new filter cartridges tailored according to the purpose of the device.

Condition: used, Year of construction: 2009, CNC control, control panel, computer monitor, screen, TFT industrial monitor -Control panel: Operating terminal control panel including PC Command Panel -Monitor: FlatmanType FK170SBRGD001 -Control cabinet cooling unit: Rittal type SK 3302100 -Individual components: see photos -Total dimensions: 550/600/H870 mm Dkjdpotp Rf Ejfx Aa Nol -Weight: 52 kg

Condition: good (used), Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low-voltage networks, circuit breakers for transformer, generator and system protection, shunt releases -Manufacturer: Siemens, Sirius motor protection switch type 3VA1180-4EE36-0AA0 -Device adapter: Rittal SV 9342.550 Djdjxnx A Rspfx Aa Nekl -Number: 1x switch available -Dimensions: 230/90/H205 mm -Weight: 2.0 kg

Condition: new, 0 600 x 800 mm Motor output 15 kW 0 0,6 m³ Diameter of the motor 260 mm Dimensions (L/W/H) 1.805 x 1.118 x 1.646 mm Weight ca. 1.100 kg Hoku single-shaft shredder H 600 Compact, robust, high throughput ----- Technical manufacturer description: The H600 high-performance shredder with its flexible application options can shred all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) and achieves Djdpfxex Iwfms Aa Nekl a high and, in the case of bulky materials, achieves an enormous reduction in the volume reduction of the material. The hydraulically controlled pusher feeds the wood waste to be shredded to the cutting area of the rotor and is controlled automatically and automatically and load-dependent. The high-performance electric rotor made of has a diameter of 252 mm and operates with a rotor speed of rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-fold rotating knives / reversible cutting crowns are located in milled knife pockets knife pockets on special knife carriers. This highly efficient system guarantees, through the reduction of the cutting gap between the counter knife and rotor, it guarantees high throughput, low energy consumption and optimum optimised discharge of the shredded material. Clamp size (10–60 mm) depending on sieve perforation. Technical data: Hopper opening 600 x 800 mm Hopper capacity 0.6 m³ Working width of the rotor 600 mm Rotor diameter 260 mm Drive power 15 kW Rotor speed 90 rpm Number of knives: 14 pieces + 2 pieces Type and size of knives: concave/40 x 40 mm, reversible cutting crowns concave/ 30 x 30 mm, broaching knives Screen perforation: 10-60 mm connected load: 400 V +/- 5% / 50 Hz included: Switch cabinet (Rittal) with 5 m cable Electrical control (SPS Siemens) Star-delta start-up Rubber oscillating elements E-rotor with blade pockets milled into the profile Gear limit switch 1st row of knives Hold-down device on the pusher for long and large parts Large 40 x 40 mm blades for optimum material feed Very robust gearbox Special broaching blade to prevent lateral jamming ----- Price of the above mentioned machine on request! ----- Prices plus packaging and shipping, plus VAT. (technical data according to manufacturer - without guarantee !)

Condition: new, Year of construction: 2026, Weima chipper / shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used, for example, thousands of times in wood-processing plants all over the world. The high quantity of these highly demanded shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display. To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We only use high-quality components - for example from Siemens or Rittal. Intuitive touch interfaces guarantee quick adjustments. Functions such as setting the slider clock or stop ensure high throughput. The built-in overload protection also prevents defects in the machine. No material bridges due to free-cutting hopper design The hopper fulfills several tasks at once. First, the material to be shredded is fed through it - manually, mechanically, or by conveyor belt. The generous opening makes it easy to fill even very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridges, is decisive for shredding. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas pressure springs are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robustly built due to the extreme stresses it is subjected to during shredding operation. To prevent dust or foreign matter from getting inside it, we have set it apart from the machine frame. This also makes it very maintenance-friendly and easy to access. Dodpsmhh Idsfx Aa Nekl Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (rpm): 80 - 125 Power (kW) 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction port (mm): 200 Feed opening (mm): 1000 x 1250 length (mm): 2045 width (mm): 1740 height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd row of knives - logspacer Location: Comes to stock 54634 Bitburg

Condition: new, Year of construction: 2026, Weima single shaft shredder type WL 6 Power 18,5 kW Dodpfeh Eiw Isx Aa Nekl Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Vqwemi Technical specification WL 6 / 18,5 kW Hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - On

Condition: new, Year of construction: 2026, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Technical specification WL 6 / 18.5 kW hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Dkedsh Hnp Depfx Aa Nol Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - Contact pressure

Condition: new, Year of construction: 2026, Weima chipper / shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used, for example, thousands of times in wood-processing plants all over the world. The high quantity of these highly demanded shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display. To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We only use high-quality components - for example from Siemens or Rittal. Intuitive touch interfaces guarantee quick adjustments. Functions such as setting the slider clock or stop ensure high throughput. The built-in overload protection also prevents defects in the machine. No material bridges due to free-cutting hopper design Dkodpspdqzxofx Aa Nol The hopper fulfills several tasks at once. First, the material to be shredded is fed through it - manually, mechanically, or by conveyor belt. The generous opening makes it easy to fill even very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridges, is decisive for shredding. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas pressure springs are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robustly built due to the extreme stresses it is subjected to during shredding operation. To prevent dust or foreign matter from getting inside it, we have set it apart from the machine frame. This also makes it very maintenance-friendly and easy to access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (rpm): 80 - 125 Power (kW) 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction port (mm): 200 Feed opening (mm): 1000 x 1250 length (mm): 2045 width (mm): 1740 height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd row of knives - logspacer Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Technical specification WL 6 / 18.5 kW hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements Dkjdpfx Ajcbtpkoa Njl - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - Contact pressure

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: S6AW11S1, turning diameter over cross slide: 540 mm, turning length: 550 mm, turning diameter: 600 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 800 mm, Machine with C-axis, E-axis, Y-axis, W-axis, and driven tools at all positions TECHNICAL DETAILS Swing diameter over bed: 600 mm Swing diameter over cross slide: 540 mm Turning length: 550 mm Longitudinal travel (Z-axis): 800 mm Cross travel (X-axis): 260 mm Control: Fanuc 18i-TB Spindle bore: 73 mm Bar capacity: 65 mm Spindle speed: 0 - 5,000 rpm Spindle torque: max. 250 Nm Distance from spindle to sub-spindle: 1,050 mm Sub-spindle: A2-6, travel: 800 mm, spindle: 105 mm, torque: 250 Nm Rapid traverse in X/Y/Z axis: X/Z: 30 m/min / Y: 12 m/min Rapid traverse speed C-axis: 1,000 rpm MACHINE DETAILS Operating pressure: 6 bar Total power requirement: 40 kVA Machine weight: approx. 5.7 t Dsdpfxew T Sq Tj Aa Nekl Machine dimensions LxWxH: 2.2 x 3.4 x 2.4 m Transport dimensions of machine: approx. 3.3 x 1.9 x 2.2 m Electric configuration - voltage/frequency: 3 x 400 V / 50-60 Hz Chip conveyor dimensions LxWxH: approx. 2.9 x 0.6 x 0.55 m (0.38 t) Chip tray dimensions LxWxH: approx. 1.6 x 1.3 x 0.25 m (0.2 t) EQUIPMENT - Control cabinet equipped with Rittal cooler - Hinged belt chip conveyor - Chip tray - Compressed air gun - No chuck included in the sale

Condition: repair required (used), Year of construction: 2011, operating hours: 8,545 h, functionality: not functional, turning length: 310 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 190 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 370 mm, mount diameter: 30 mm, Condition: Non-functional. The machine has an unknown malfunction in the turret, making referencing and axis movement impossible. The machine requires repair! TECHNICAL DETAILS Turning length: 310 mm Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Distance between centers: 500 mm X-axis travel: 190 mm Z-axis travel: Z1: 335 / Z3: 370 mm Y-axis travel: 80 mm Control: Heidenhain CNC Pilot 4290 Spindle speed: 6,000 rpm Spindle bore: 73 mm Bar capacity: 50 mm Main spindle torque: 95 Nm at 100% and 127 Nm at 40% Tool turret - number of stations: 12 Tool holder: VDI 30 mm Rapid traverse X + Z axes: 30 m/min MACHINE DETAILS Total power requirement: 20 kVA Dkodpfxew T Srde Aa Njl Chip conveyor dimensions (LxWxH): 3.2 x 0.45 x 1.5 m Operating hours (on-time): 36,443 h Spindle hours: 8,545 h Interface: yes EQUIPMENT - 160 mm 3-jaw chuck with matching flange - 2 sets of spare jaws - 12-station turret with driven tooling - Sauter disc turret (C-axis = 300 rpm) - Chip conveyor 450 K-1/250; year of manufacture 2000 - Manual chuck fitted – no hydraulic chuck - Electrical cabinet with Rittal cooling

Condition: excellent (used), System: Decanter / centrifuge dewatering system Manufacturer: Hiller Model: demonstration machine System: Dewatering system as a compact system as a ready-to-connect, operational unit mounted on a platform. Design: Changeable rack as a bridge with frame structure made of galvanized steel, plug-and-play integration into ongoing operation Type: DP45N Mach. no.: on request Year of manufacture: 2018 Throughput: up to max. 20 m3/h Max. Speed: 3500 I/min Acceleration: 3063 x g Drum inner diameter: approx. 450 mm Parts in contact with the product: stainless steel Parts not in contact with the product: steel Drum length: 1948 mm Drum material: 1.4392 Screw material: 1.4404/1.4408 Dedpfoppt Ibjx Aa Nskl Construction: Centrifuge base frame made of steel with foot and support plates for holding and raising the centrifuge Central discharge: with compensator Central chute: incl. central control: Pipe for product-contacting lines: made of stainless steel Electrical engineering; Hiller-VA / Rittal switchgear wired Automation device Siemens S7 Dimensions: approx. 5550x2150x2100 mm (LxWxH) Transport weight: 7500 kg OTHER: This system is available twice

Condition: excellent (used), Autotherm Here we offer you a 6-circuit temperature control device. Without active refrigerating machine! According to the enclosed technical brief description: Temperature range: -40°C ... +85°C (extended temperature range -40°C...+130°C) increased heating power 27 kW instead of 18 kW with 1x temperature control included in the main line with 6x temperature measurement in the respective flow included with 6x temperature measurement in the respective return included with 6x volume flow and pressure measurement in the respective flow included with 6x volume flow and pressure control included 1l/min ... 12 l/min and 0.1 bar ... 3 bar incl. release control incl. FU-controlled pump in the main line incl. 6x 3-way valve with 6x additional overflow valve 2 ... 12 bar adjustable included preset to 2,4 bar with filling and draining device included for all circuits together/simultaneously incl. 50l integrated tank incl. pneumatic emptying function with control S7 incl. included Energy saving and cooling capacity extension: An additional glycol circuit integrated in the temperature control circuit takes over the cooling of the consumer in a temperature range from +85°C to +30°C. The absorbed energy is transferred to the on-site < 20°C cold water network. The cooling capacity at a flow temperature of +20°C: 50 kW. This increases the cooling rate in this temperature range and saves energy due to the lower running time of the refrigerant compressor. (Footprint of the basic unit according to data sheet increases by approx. 0.3 m²) Assembly in Rittal bayed control cabinet: 2x TS8 800x1000x2000 mm 1x additional, closed switch box min. 600x600x2000 mm (for control/electrics) Djdpfx Askn Nilea Nokl Supplied via on-site or optional cooling medium supply Flow temperature, on-site cooling brine -43°C, cooling brine requirement 7.5 m³/h continuously controlled For cooling capacity a cooling medium must be connected! Weight approx. 1200 kg Type: Autotherm temperature control unit AWF 130-27/VK/6K Sale ex location! Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), GH Induction Type: 30 SMBC Transistor generator for inductive heating Medium frequency with series resonant circuit The SMBC generator series retains the traditional advantages of the Transithermic family of generators (high reliability, simple operation and high efficiency) in a series resonant circuit and a compact design, with cooling enclosed in the generator enclosure. Rittal generator cabinet and GH induction TC150 / 2 resonant circuit Voltage 400V Frequency 50 Hz Current 56 A Power 37.5 KVA as good as new condition! Scope of delivery: Dsdpfx Aeb E I Utea Nskl Transistor generator, Rittal generator cabinet with cooling and TC150 / 2 resonant circuit (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 570 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 24, TECHNICAL DETAILS X-travel: 1,000 / 600 mm Y-travel: 570 mm Z-travel: 570 mm Control: Fagor 8055 MC Spindle Speed: max. 10,000 rpm Spindle mount: SK40 Feed and rapid traverse Feed speed X/Y/Z: continuously variable: 10 m/min Rapid traverse X/Y/Z: 24 m/min Table Table size: 1,200 x 500 mm Table load: max. 800 kg Distance spindle nose to table: min.: 100 mm, max.: 670 mm Dkjdswlpa Ropfx Aa Nol Tool magazine Number of tool positions: 24 Tool mount: SK40 MACHINE DETAILS Machine weight: approx. 5.0 t Dimensions (L x W x H): approx. 3,300 x 2,300 x 2,800 mm Total power requirement: 15 kW Interface: 232 Operating hours (switch-on hours): not visible Functional description: runs smoothly, fully functional, quiet spindle noise from 3,000 rpm EQUIPMENT - Cooling system with spindle feed (no internal cooling) - Control panel with handheld control unit - Chip conveyor - Electrical cabinet with cooling Rittal SK 3305500

Condition: good (used), Year of construction: 2012, AXA DBZ 2/50 double station machining center, Year of construction 2012, Siemens 840 control system, Travel X/Y/Z 2x800/600/600 mm, 16-position tool changer, SK 50 tool holder, Spindle speed up to 4,000 rpm, Milling spindle - water-cooled hollow shaft motor, dir. Measuring systems, chip conveyor, heat exchanger, switch cabinet, oil mist lubrication, Dsdsridf Uspfx Aa Nskl Rittal cooling system,

Condition: refurbished (used), Year of construction: 2019, operating hours: 5,900 h, functionality: fully functional, Waterjet Cutting System 2010 Premium TAC From previous ownership, serviced thoroughly after complete service in 02/2026, inspected and ready for operation. Maximator JET certificate available. Dkodpfx Aaexvqvfe Nsl Availability: in 4 weeks Year of manufacture cutting table: 2019 Operating hours cutting table: 5,900 hrs • Effective cutting area: 2,000 mm (gantry) x 1,000 mm • Z-axis CNC vertical clearance 200 mm with Quick UP • Cutting head TAC12, A/B +/- 12° • Automatic height sensing and collision protection • CNC control NUM • Rittal electrical cabinet on wheels • Operator PC with LED monitor, splash-proof keyboard and mouse • Waterjet software SmartCut powered by IGEMS; subscription-based • Handheld operator device • Laser for position detection • Cutting valve MJ 100 • Abrasive head aJET 3D • CNC abrasive dosing unit with intermediate hopper • Abrasive storage container 1,200 kg with automatic pressure feed system • High-pressure piping on the axes up to the cutting head • Safety system with light barriers • Water tank with heavy-duty support slats • Reference edge on X and Y • Machine feet with precision wedge shoes • 1-year or 1,200 operating hours warranty • High-pressure pump HYTRON 40.30, 30 kW, YOM 2006, 28,852 hrs, retrofit in 10/2025 with warranty, new pulsation damper with TÜV certification Technical data and prices subject to change and errors excepted. Sale subject to prior sale.

Year of construction: 2022, condition: new, grinding diameter:260 mm grinding length:1000 mm centre height:130 mm Djdpfog N Nh Dex Aa Njkl dimensions of grinding wheel:400x60x127 mm grinding wheel speeds:1700,1900,2200 U/min grinding head swivelling:+/- 30 Grad table swivelling +/-:9 Grad Tailstock spindle taper:4 MK grinding wheel motor:4 kW hydraulic motor:1,5 kW work piece motor:0,37 kW net weight:2400 kg gross weight:2950 kg PLC control:Siemens S7 tailstock sleeve movement:pneumatic, via foot padel operating panel:New Rittal operating panel with touchscreen screen from Siemens centers sleeves:2 grinding wheel flange:2 unused cylindrical grinding machine, manufactured by ABA type URS 400 Year, 2009 Further technical data, and standard and optional equipment, as defined in Appendix. Payment: 100% before loading of the machine Warranty: no

Condition: new, Power 15 KW Dedpfx Aaovwfhco Nskl Technical specification:Hopper opening: 600 x 800 mmHopper capacity: 0.6 m³Working width of the rotor: 600 mmDiameter of the rotor: 260 mmDrive power: 15 kWRotor speed: 90 ber of knives: 14 pieces 2 piecesType and size of knives: concave / 40 x 40 mm, reversible cutting crownsconcave / 30 x 30 mm, broaching knivesScreen perforation: 15/20 mmPaint finish: frame in RAL 5010, hopper in RAL 7016(HoKuTech standard paint finish)Connected load: 400 V /- 5 % / 50 Hzincluded:Switch cabinet (Rittal) with 5 m cableElectrical control (PLC Siemens)Star-delta startRubber oscillating elementsE-rotor with knife pockets milled into the profileGear limit switch1. Knife rowHold-down device on pusher for long and large partsLarge 40 x 40 mm knives for optimum material feedVery robust gearboxSpecial broaching knives to prevent lateral jammingMachine number: 510-5238

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 01/40360/1117, input voltage: 230 V, measuring range X-axis: 2,750 mm, measuring range Y-axis: 1,250 mm, measuring range Z-axis: 85 mm, overall weight: 2,600 kg, Measuring range: 2,750 x 1,250 mm Factory-refurbished measuring table SN 01/40360/1117 (year of manufacture: 2017) – Subject to prior sale - Operating system: Windows 10 For measuring external dimensions and one-sided inspection of vertical and horizontal boreholes in panel-type workpieces. APPLICATION AREA: Setup assistance: Measurement of first-off sample parts Random inspection: Measurement of sample pieces MEASUREMENT CRITERIA: Dimensions: Length, width, angles Borehole, vertical: Position, diameter, depth, borehole distances Borehole, horizontal: Position, diameter, depth, distance to the panel surface (NOTE: Test pins or inserted dowels are required) Groove: Edge distance, width, depth Radius: Center position, radius Rebate: Width, depth Cutouts: Width, edge distance Technical data: Workpiece length (X-axis) min./max.: 180 mm – 2,750 mm Workpiece width (Y-axis) min./max.: 50 mm – 1,250 mm (Note: Measurement of vertical and/or horizontal boreholes as well as grooves and rebates on the Y-axis is possible up to 1,150 mm position) Workpiece thickness (Z-axis) min./max.: 5 mm – 85 mm NOTE: Other sizes available on request. Accuracy: +/-0.1 mm Resolution: 0.01 mm (NOTE: Consistent lighting conditions are required to maintain accuracy – independent of daylight) Measuring surface: High-precision, ground granite plate 3,200 x 1,340 x 150 mm Working height above floor level: approx. 1,000 mm +/- 50 mm Required space (L/W/H): approx. 5,000 mm/ 2,000 mm/ 1,700 mm Weight approx.: 2,400 kg + control cabinet including operator panel approx. 200 kg Total electrical connected load: 2,500 W Compressed air connection: 6 bar Operator side: left Operating voltage: 230V/16A (CEE7/7) Network connection: RJ45 Ambient temperature: max. 35 degrees Celsius Dodpfxew Ev N Sj Aa Nokl (NOTE: For higher temperatures, a climate control unit in the control cabinet is recommended – available as an option.) Technical changes reserved. The above performance data assume suitable workpieces are used. Scope of delivery: ⦁ Automatic measuring table with 2-axis servo drive ⦁ Automatic camera height positioning ⦁ 1 x CAD4U software license and HECHT interface for measurement program creation on a PC in work preparation ⦁ 19” PC with CAD4U software license and interface for measurement program creation, current software version Results and Driver for program execution, image processing software ⦁ Camera, lens, and lighting for image capture ⦁ Operating system: Windows Ultimate 64-bit ⦁ Rittal PC cabinet 600x1600x650 mm (W x H x D) ⦁ Test pins for measuring lateral boreholes: 10 pcs each with a diameter of 5, 6, 8 mm ⦁ 4 x corner angles for black parts ⦁ SQL Express database installed on the machine PC Languages: The operator software is available in the following languages: German, English, French, Italian, Spanish, Flemish, Polish, Lithuanian, Russian, and Chinese. Additional languages available on request. SAFETY AND PROTECTION DEVICES Emergency stop switch unit All machines for EU member countries with CE marking according to EC Machinery Directive 2006/42/EC Technical documentation stored on PC The measuring table must be fully enclosed with a safety fence. This and other safety devices are not included in the delivery.

Condition: good (used), Year of construction: 2021, machine/vehicle number: 22112P114, Offer 24107 Technical data: - Pump station unused in mint condition Dksdstyli Nepfx Aa Nol - Pump make DELIMON type FZ-B 3.75 ccm/m. - Flow rate 7.6 cm³/min - Pressure capacity up to 200 bar - Lubrication unit fill level - thermostat - fan - 400 V electrical connection - installed in RITTAL switch cabinet with hinged lid and two hinged doors - Space requirement approx. W 1100 x H 1100 x D 500 mm - Weight approx. 100 kg