Used Roll Conveyour for sale (7,797)

Condition: good (used), Rolling width: 2050mm Iisdpfx Ajwtpgtscroc Rolling thickness 3x toproll Ø:18mm Rolling thickness 5x toproll Ø:21mm Rolling thickness prebending: 12mm Top Roll Ø: 280mm Side roll Ø: 260mm Number of rolls: 3 Rolling speed: 0-5 Adjustiment lower roll: 0-150mm/min. Adjustment side rolls: 0-150mm/min. Top support: yes Power: 12kW Length: 3000mm Width: 1500mm Height: 1600mm Weight: 5200kg

Condition: used, Thread rolling machine UPWS 25. Isdpezd Rf Nsfx Acroic

Condition: good (used), Year of construction: 2019, 1 used horizontal reciprocating roller grinding machine Manufacturer: Granlund Type: 650 XB Year of manufacture: 2019 Operating hours: 2905 Control: Fanuc Series 31i - B Technical data Max. workpiece length (mm): 300 Outer diameter of ring grooves (mm): 120-650 Grinding wheel diameter (mm): 356 Grinding wheel thickness (mm): 75 Tailstock quill stroke (mm): 45 Equipment: automatic grinding wheel dressing device, 2 x tailstock, paper band filter system, oil mist extraction, Iiedpfx Ajy Nxd Tjcrjc control cabinet with cooler, grinding wheel balancing stand Dimensions: 3800 x 2800 x 2200 mm Weight: 4500 kg Technical features It is possible to perform deep grinding on soft workpieces. This means that no pre-milled blank parts need to be manufactured or purchased, as the machine performs the entire process. The machine is equipped with an automatic grinding wheel dressing cycle, including automatic compensation for wheel diameter and cutting speed.

Condition: good (used), Year of construction: 2008, 1 used profile ring rolling machine Make: Profiroll Bad Düben Model: URWA 250 Year of manufacture: 2008 Technical data: Control: SINUMERIK 840 D Rolling force: 800 kN Max. workpiece diameter: 250 mm Workpiece width: 80 mm Spindle diameter: 110 mm Spindle speed: 100–700 rpm Drive power: 110 kW Mandrel diameter: 45–100 mm Length: 2,600 mm Width: 2,600 mm Height: 2,600 mm Weight: 12.5 t Scope of delivery: Centralized lubrication Infinitely variable speeds Proportional measuring system Linear mandrel guide Mandrel run-out monitoring Iiedpfx Ajyurx Tscrec Process data management Rolling equipment: Feeder: 130–190 mm / W 46–80 mm Magazine: 130–190 mm Measuring head Separate cooling unit Electronic setup assistance Process visualization Ring stopper and turning device for rotating the rolled part

Condition: used, Roll guiding device WITELS-ALBERT Berlin, type ER 7 Guiding roller width: 30 mm Guiding roller diameter: 30 mm Belt cross-section: approx. 1.5 x 10 mm or 0.5 x 25 mm - Individual adjustment for the 3 upper guiding rollers via wing nut and lock nut - Quick-release mechanism via eccentric lever for the 4 lower guiding rollers - 2 pre-forming guiding rollers, Ø 32 x 13 mm, mounted with a 90° offset - For guiding strip steel, last used for a belt cross-section of approx. 1.5 x 10 mm Space required L x W x H: 250 x 100 x 150 mm Isdpfx Ajzczvdecroic Weight: 5 kg Good condition

Condition: new, | Interchangeable roll-off platform for construction machinery or similar | Payload approx. 14 tons | 6.50 m x 2.50 m | Tare weight approx. 2000 kg | New and immediately available | Subject to errors and prior sale. Iedpfx Aszbuizscroic

Year of construction: 2021, condition: used, We offer this used VALLOY VP320C roll-fed digital label printer, year of construction 2021. The Bizpress 13R is a roll-fed digital label printer designed for small-scale production environments, with a recommended monthly output of up to 20,000 m². It combines LED printing technology with a reliable Xerox print module, ensuring consistent, high-quality results. Model: VP320C Power supply voltage: 220-240 V Power supply frequency: 50 Hz Serial number: VP320C47061320210819V15TW Manufacturing date: 2021-08-19 Maximum media roller diameter: 450 mm Maximum media width: 320 mm Maximum label roller diameter: 310 mm Maximum label length: 1200 mm Maximum media thickness: 0.3 mm Machine weight: 350 kg Machine length: 140 cm Machine width: 85 cm Machine height: 160 cm Counter ca. 160k meters Ijdpfezdf T Aox Acrjic If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, roller (top) diameter: 130 mm, side roll diameter: 110 mm, working width: 1,030 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, power: 2.2 kW (2.99 HP), number of digital displays: 3, Equipment: emergency stop, foot remote control, 4-Roll Round Bending Machine Manufacturer: Sahinler, Type: 4RM 10-130 HRC Year of Manufacture: 2008 Ijdpfxezcpu Uo Acrsic Technical Data Manufacturer: Sahinler Type: 4RM 10-130 HRC Year of Manufacture: 2008 Usable Length: 1030 mm Top Roll Diameter: 130 mm Side Roll Diameter: 110 mm Sheet Thickness (without pre-bending): 6 mm Sheet Thickness (with pre-bending): 5 mm Total Power: 2.2 kW Dimensions: 2.4 x 1 x 1 m Weight: approx. 1.5 t Equipment • Hardened rolls • Digital display for roll positioning All information without guarantee.

Condition: good (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: 4ROLL, roller (bottom) diameter: 470 mm, roller (top) diameter: 470 mm, side roll diameter: 420 mm, roller diameter: 470 mm, roller length: 3,050 mm, working width: 3,050 mm, working height: 1,800 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 45 mm, sheet thickness aluminum (max.): 45 mm, sheet thickness copper (max.): 45 mm, overall weight: 43,000 kg, total length: 7,700 mm, total width: 2,410 mm, total height: 2,470 mm, power: 37 kW (50.31 HP), input voltage: 380 V, type of input current: three-phase, working length: 3,050 mm, Equipment: documentation/manual, emergency stop, PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM MODEL 4HCI3-35/30 YEAR 1990 Iodpfewb Scmsx Acreic PLATE BENDING ROLL LINEAR GUIDEWAYS DOUBLE PINCH PRE-BENDING Machine in good working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 35 mm Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower 470 mm -side rolls left/right 420 mm • Hardening of the 4 rolls high strength surface • 3 rolls driven powered with gear unit with hydraulic motor • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening front hydraulic drop-end to unload the closed shell. • Variable speed working roll bending rotation hydraulic speed fast/slow. • Console electric on wheels with centralized commands joysticks and 3 digital readout. • Digital readouts of the rolls position bending and pre-bending repeatability. • Hydraulic tank capacity oil 350 liters – power electric 37 Kw voltage 380 /50 • Dimension 7700 x2410 x H 2470 mm - weight 43000kgs

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 3ROLL 4000 X 6 MM, roller (bottom) diameter: 300 mm, roller diameter: 310 mm, roller length: 4,050 mm, working width: 4,000 mm, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 11,000 kg, total length: 5,700 mm, total width: 1,500 mm, total height: 1,700 mm, type of input current: three-phase, working length: 4,000 mm, Equipment: documentation/manual, emergency stop, 3 ROLL PLATE BENDING MACHINE WITH PREPINCHING capacity plate roll 4000 x 6 mm Plate width 4000 mm Thickness plate rolling 6 mm Pyramid 3 rolls with pre-pinch cylindrical plate rolling Conical plate rolling Rollers surface length 4050 mm Ijdpsvn I Hcefx Acroic Top roll 310 mm Side rolls 300 mm Datasheet power rollers rotation 15 Hp -3 rolls driven rotation with gear unit power bending- prebend side lower rollers 7,5+7,5 Hp Cene bending attachment rollers tiltable for plate conical forming - hardened contrast pad roller type Hydraulic open front drop-end , top-roll tilt-up wide opening for unloading Console electric on wheels, electric push buttons commands remote Digital readouts rollers position repetability safety and emergency installiton machine in working condition dimension 5700 x1500 x H1700 mm weight 11 Ton

Condition: excellent (used), functionality: fully functional, Year of construction: 1993, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 280 mm, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 4,050 mm, working width: 4,000 mm, working height: 1,100 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, overall weight: 11,000 kg, total length: 6,000 mm, total width: 1,450 mm, total height: 1,510 mm, power: 11.03 kW (15.00 HP), input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, hardened rollers, 3 roll 4000x8 mm Plate bending machine with pre-pinch Model Famar CPI4/6 CAPACITY plate width 4000 mm plate thickness 8 mm pre-bending 6 mm --- Useful rollers width 4050 mm Top roll d 300 mm Side rollers D 280 mm hardened surface of the 3 rolls position readout of the bending rollers Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on rollers for profile bending Ijdpfx Acjxnmb Iereic Variable speed rolling up to 5 mtr/min power electric motor 15Hp on hydraulic unit 15Hp-Voltage 380/50 safety installations with emergency stop dimension 6000x1450 x H 1510 weight 11 Ton

Year of construction: 2004, condition: like new (used), Profile bending machine hydraulic heavy duty -output shafts 360 mm Equipped with traction tooling for H-beam HEB IPE INP rolling on the hard-side Configuration -pyramid dual pinch side rolls independent hydraulic -3 rolls driven hydraulic and gear unit -synchro. -set of rolls for HEB beam – INP beam - flat bar square bar. -Set of heads for traction the HEB – INP beam bending on the hard side -Set of rolls for pipe bending. Pipe 20 inches max capacity. -Lateral correctors left/right side hydraulic operated in 3 directions -Add-on rollers angle bending & T-section leg-in / leg-out -Control panel console electric joysticks manual use & program automatic -Digital readout screen display 8 axis position reading of the rolls - 8 axis automatic programmable bending works -Electric Vac 400/50 ( rewirable on request ) -weight total of the machine approx. 65 Ton. -Hydraulic reservoir oil 1200 liters -High pressure hydraulic power unit multi pumps run on 100Hp electric motor . -Working speed variable slow-fast. -Emergency shut-down devices in compliance with safety requirement. -CE quality certification, Made in Italy manufacturing. -Service manuals and operation books along with the machine Iodsiwa Hcjpfx Acrsic On request we supply additional set of rolls interchangeable to seat and bend the wanted profiles. Capacity table max.: – HEB 500 -INP 600 *-ANGLE 200 MM *-T300 MM *-20″ PIPE SIZE *-UNP 500 MM *-FLATBAR 300X80 MM *-SQUAREBAR 200 MM *-PIPE/TUBE UP TO 508MM see capacity chart in enclosed

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 0 h, machine/vehicle number: plate roll, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: MG EVO, controller model: EVO 4 AXIS, number of rollers: 4, roller (bottom) diameter: 140 mm, roller (top) diameter: 160 mm, side roll diameter: 150 mm, roller diameter: 200 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 700 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, overall weight: 2,200 kg, total length: 3,200 mm, total width: 1,100 mm, total height: 1,200 mm, power: 4 kW (5.44 HP), input voltage: 400 V, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BRAND MG ITALY, HYDRAULIC MODEL M2006P EVO_CNC PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BENDING CNC_EVO PROGRAMMABLE AUTOCALCULATION AUTOMATIC PLATE ROLLING Capacity: -Width of plate: 2000 mm -Thickness of plate rolling 6 mm -Thickness of plate pre-bending 4 mm Rolls -useful width mm. 2050 -Top roll mm. 160 - Lower roll mm. 140 Configuration installed: • Surface hardening of the four rolls, smooth finishing suitable for stainless plates rolling Iisdpow Dnd Sefx Acrec • Dual pre-pinch, with adjustable force upon the input of plate thickness • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system for re-rolling of welded shells rounding. • Console electric independent with centralized commands joysticks and CNC screen readout. • CNC controller on touch screen 15” , CAD/CAM interface 4 axis auto calculation software package. with digital readout of the axis for use in manual rolling, semiautomatic and fully automatic programmable. • Opening front side hydraulic drop-end to unload closed shells. • Variable working speed step-less axis interpolation. • Safety installation with emergency stop. • Instruction manuals for operation and service.

Condition: good (used), functionality: fully functional, degree of automation: manual, actuation type: electric, number of rollers: 3, shaft diameter: 130 mm, roller diameter: 380 mm, rotational speed (min.): 5 rpm, overall weight: 4,500 kg, power: 15 kW (20.39 HP), input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, emergency stop, PROFILE BENDING ROLL 130- MODEL PARMIGIANI ITALY ELECTRO MECHANICAL MACHINE SHAFTS OUTPUT DIA..130 MM 3 ROLLERS PYRAMID UPPER ROLL DRIVEN ROTATION WITH GEARUNIT ONELECTRIC MOTOR Kw 11 SIDE ROLLERS BENDING POWERED ON ELECTRIC MOTOR Kw 3 UPPER ROLL DIA 380 mm SIDE ROLLERS DIA 350 mm CONTROL PANEL UPGRADED LATEST TECHNOLOGY ELECTRIC INVERTERS FULL POWER CONTROL WITH INFINITE VARIABLE SPEED Iedpfx Acoxackcsroic COMMANDS ELECTRIC ON PORTABLE PUSH BUTTONS DIGITAL POSITION READOUT OF THE BENDING ROLLERS WEIGHT OF THE MACHINE 4,5 TON SAFETY AND EMERGENCY SYSTEM INSTALLED MACHINE WORK WITH VERTICAL SHAFTS

Condition: like new (used), functionality: fully functional, Year of construction: 2025, machine/vehicle number: M3022, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Delsy, controller model: Digital readout, number of rollers: 4, roller (bottom) diameter: 330 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller diameter: 400 mm, roller length: 3,000 mm, working width: 3,100 mm, working height: 900 mm, sheet thickness (max.): 22 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 22 mm, sheet thickness aluminum (max.): 30 mm, overall weight: 13,000 kg, power: 10 kW (13.60 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, hardened rollers, swiveling upper roller, Bending capacity with dual Initial pinch planetary Iedpfx Acoid Al Nsreic plate width 3000 mm thickness 22 mm pre-bend 18 mm --- Length on the rolls 3100 mm top roll 350 mm lower roll 330 mm Power electric 20Hp Vac 400/50 Installed configuration Hardened surface of the 4 rolls Driven central rolls rotation hydraulic motorized with gear units Synchronized hydraulic rotation between the rolls Rolls parallelism lifetime set with torsion bar Conical plate bend hydraulic attachment Calibration re-rolling feature for welded shells Front open drop-end to unload the closed rolled plates. Control console electric commands with digital readout Safety and emergency systems installed Manuals and schematics originals

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: SIEMENS, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 150 mm, roller (top) diameter: 150 mm, side roll diameter: 140 mm, roller diameter: 150 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 18 mm, working height: 800 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 2,800 kg, total length: 3,800 mm, total width: 1,200 mm, total height: 1,100 mm, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BENDING MACHINE NC HYDRAULIC MODEL 2000X6 MM / 4 MM PREBEND PROGRAMMABLE AUTOMATIC ROLLING NC 4 AXIS CONTROLLER Capacity: plate width 2000 mm thickness rolling 6 mm pre-bending 4 mm minimum diameter of rolling D= 180 mm depending on the plate thickness and strength Rollers length 2050 mm Upper roll size 150 mm Lower roll size 150 mm Rollers hardened surface high strength smooth surface finishing suitable for rolling stainless steel quality plates Conical plate rolling attachment Rotation electric powered on central rollers for bending traction of the plate Pre-pinch load variable upon plate thickness and strength Console electric commands push buttons with digital readout of the 4 rollers on the screen. NC programmable 4-axis to set automatic rolling with save 200 programs in memory front side hydraulic opening to remove the rolled shells Iisdow Hpzwjpfx Acrjc speed slow/fast variable safety installation with emergency stop. Instruction manuals for operation and service. Layout mm 3800x1200xH1100 mm Weight 2800 Kgs

Condition: good (used), functionality: fully functional, Year of construction: 2002, control type: manual, degree of automation: manual, actuation type: hydraulic, pipe diameter (max.): 60,90,115 mm, tube wall thickness (max.): 3 mm, number of axes: 3, working height: 700 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 200 bar, pressure (max.): 200 bar, number of digital displays: 3, Equipment: CE marking, documentation/manual, emergency stop, quick-change device, Limpet coil roller hydraulic to form half round pipe from flat stainless steel strip and bending into wanted radius with spiral continuous. -Shafts output 80 mm -Interchangeable set of rollers on the shafts for the different size of pipe 60 mm , 90 mm , 115 mm -Coil holder for the reel metal strip with guide-way bench uncoiling and alignment the steel strip to the rolling machine Isdpfxjyik Hce Acrjic -Pinching lower central roll adjustable to form the half pipe -Digital position readout to determine the bending diameter of the coil, the pitch of the coil, the half tube shape forming -hydraulic arm movable in 3 directions to set the pitch of the coil roll -Upper vertical support hydraulic operated to hold in position the formed diameter and collect the coils from diameter 700 to diameter 3000 mm -Operator console electric with push buttons and digital position readouts for the coil length, the bending radius and the forming load. -Service manuals and operation books along with the machine

Condition: refurbished (used), functionality: fully functional, Year of construction: 2007, DAVI_MCB 3060 WT 4-roll plate bending machine CNC _ 3000x65 MM - Year of make 2007 Capacity plate width 3100 mm Plate thickness 65 mm Prebend 55 mm TOP ROLL 600 MM LOWER ROLL 550 MM Configuration installed: • Surface hardening of the four rolls • Dual pre-pinch, with adjustable force upon the input of plate thickness • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system for re-rolling of welded shells rounding. • Console electric independent with centralized commands joysticks and CNC screen readout. • CNC controller DAVI GENIUS semiautomatic and fully automatic programmable. with digital readout of the 4rollers for use in manual operation, • Opening front side hydraulic drop-end to unload closed shells. • Variable working speed step-less axis interpolation. • Safety installation with emergency stop. • Instruction manuals for operation and service Voltage electric 3phase Vac 380/50 power Kw 75 nr.1 top support hydraulic operated , shell ID max 5 mtrs - CNC programmable Ijdjy D Npiepfx Acreic nr.1 side support hydraulic on the left nr.1 side support hydraulic on the right, finger pusher to swing the sheet plate forming cones rolling.

Condition: good (used), functionality: fully functional, Year of construction: 1998, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: Simatic OP7, number of rollers: 4, roller (bottom) diameter: 470 mm, roller (top) diameter: 530 mm, side roll diameter: 400 mm, roller diameter: 530 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 2,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 65 mm, sheet thickness stainless steel (max.): 50 mm, overall weight: 40,000 kg, total length: 6,000 mm, total width: 2,900 mm, total height: 2,900 mm, power: 55 kW (74.78 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, plate bending roll capacity 3000x50 mm Davi modelMCB3053 Hydraulic 4 roll plate bending machine, year 1998 plate width 3000 mm thickness rolling 50 mm pre-bending 40 mm width on the rolls 3100 mm upper roll size 530 mm lower roll 470 mm side rolls 400 mm Power electric 70Hp on hydraulic unit voltage 380/50 - Installed configuration Hardened surface of the 4 rolls conical bending attachment – hardened cone bending Console electric with digital position readout of the rolls Controller Siemens Simatic OP7 NC programmer for automatic rolling Hydraulic power driven the central rolls with axial gearbox Pre-pinch pressure adjustable plate edge pre-bend. Drop-end open front for unloading closed shells Rerolling system for calibration roundness of welded shells. Safety and emergency system installed. Ijdpjy D Ngzjfx Acreic Manuals original for operation and maintenance Dimension 6000x2900 x h 2900 mm weight 40000 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: MG EVO, controller model: 4axis autocalc, number of rollers: 4, roller (bottom) diameter: 240 mm, roller (top) diameter: 250 mm, side roll diameter: 180 mm, roller diameter: 300 mm, roller length: 4,100 mm, working width: 4,000 mm, working height: 800 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, power: 5 kW (6.80 HP), input voltage: 400 V, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, model capacity 4000x6 mm CNC EVO plate roll Hydraulic 4 roll plate bending machine used year 2017 plate thickness rolling 6 mm pre-bend 4 mm minimum rolling diameter ID 300 mm plate max width on the rollers 4100 mm top roll size 250 mm lower roll 240 mm side rolls 180 mm Power on hydraulic unit 5,5 kw Vac 400/50 -480/60 Installed configuration Hardened rolls high surface strength Conical plate rolling, cone bending Electric console remoted with CNC EVO 4 axis Automatic plate roll programmable on drawing import from CAD station Rolling compensation upon plate different yield strength data input Isdpfx Acey I Sp Tjroic Hydraulic rotation central rolls driven Parallelism of the 4 rollers lifetime with torsion bar Pre-pinch setting upon plate real strength for best pre-bend Drop-end open front for unloading closed shells Re-rolling system for welded shells precise calibration. Safety and emergency stop installed Manuals and schematics service and instruction books

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 3roll 3500x140 mm prepinch, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: MG, controller model: MG, number of rollers: 3, roller (bottom) diameter: 880 mm, roller (top) diameter: 950 mm, side roll diameter: 880 mm, roller length: 3,550 mm, working width: 3,500 mm, working height: 3,950 mm, sheet thickness (max.): 140 mm, sheet thickness steel (max.): 175 mm, overall weight: 2,00,000 kg, total length: 8,800 mm, total width: 5,100 mm, total height: 5,775 mm, power: 200 kW (271.92 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, Hydraulic Plate Bending machine planetary pinch pyramid with prebend. model MG35140V 3 roll capacity 3500x140 mm The machine was overhauled in 2024, Capacity : Plate width mm. 3500 Plate thickness mm. 140 Capacity chart in enclosed Tech data: -3 rolls driven hydraulic motorized with axial gear unit on each roll independent -Synchronized hydraulic rotation of the 3 rolls with variable speed. Iijdpfxjyzim As Acroc -Planetary design with pre-pinch fully hydraulic -Conical plate bending with hardened contrast pad -Digital position readouts of the bending rolls -Rolls installed on bearings double crown heavy duty -Overload safety hydraulic operation protection of the 3 rolls -High pressure hydraulic power pack with multi-pumps oil feed -Centralized control panel electric on wheels with joysticks and digital readouts -Emergency stop with safety system around the machine working area Rolls surface length mm. 3550 Top roll mm. 950 Side rolls mm. 880 Electric power on hydraulic unit Hp 100 + Hp 100 Voltage 380 Vac / 50 Hz Configuration & accessories installed with the machine -Hardened surface of the 3 rolls -Conical plate bending attachment , rolls tilt with contrast roller type. -Centralized operator panel with directional joysticks electric. -Digital position readout of the bending rolls. -Emergency and safety installations, certified CE -User manuals and instruction books in English -Dimension see layout drw in enclosed

Condition: good (used), functionality: fully functional, Year of construction: 1991, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 240 mm, roller (top) diameter: 260 mm, roller diameter: 260 mm, roller length: 3,050 mm, working width: 3,000 mm, working height: 900 mm, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, sheet thickness stainless steel (max.): 10 mm, overall weight: 8,000 kg, total length: 5,000 mm, total width: 1,500 mm, total height: 1,600 mm, power: 7.35 kW (9.99 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, MCB3028 4 roll hydraulic plate bending machine capacity 3000x13 mm Make Davi Italy - year 1991 Plate width 3000 mm Plate thickness 13 mm Isdpsy T Exfofx Acroic Prebending 10 mm top roll size 280 mm pinch roll 260 mm Electric power Hp 10 380/50 Vac Configuration installed: -Hardened rolls -Conical hydraulic attachment -Digital position readouts infinitely variable speed control via hydraulic proportional joysticks hydraulic motor driven roller rotation with axial gearbox each roll central independent front open hydraulic drop-end to unload closed shells machine operating console centralized fully hydraulic -Extended rolls front shafts -one plus station hydraulic to connect a support ---- Cleaned, controlled repainted , tested Machine in optimal working conditions ready for use. CE quality certification made in Italy . Manuals and schematics original documents with the machine.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: EVO, controller model: EVO 4 AXIS 15", number of rollers: 4, roller (top) diameter: 300 mm, roller diameter: 300 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 1,250 mm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 25 mm, overall weight: 17,000 kg, total length: 5,500 mm, total width: 2,000 mm, total height: 2,100 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4roll hydraulic plate bending machine rated capacity 3000x35 mm MODEL MG M3035 , used year 2024 machine as new with warranty included Planetary dual pre-pinch Performance Capacity: Plate width 3000 mm plate thickness rolling 30 mm pre-bend 25 mm minimum rolling diameter ID 350 mm max open width plate feed 3100 mm special top roll reduced size 300 mm to achieve rolling ID 350 mm Power electric motor 18.5kw on hydraulic unit Vac 400/50 -480/60 Installed configuration Hardened rolls high surface strength Conical plate rolling, cone bending Electric console remoted on wheels with joysticks and readout CNC programmable 4 axis controller touch screen 15” Setup virtual infinite rolling programs with teach-in mode and cad/cam operator interface --- Iisdpfxoy Tbf Ij Acrec Hydraulic motorized driven the central rolls Pre-pinch load adjustable for pre-bend Drop-end top roll front open unloading closed shells Re-rolling system for welded shells calibration. Safety and emergency stop Manuals and schematics machine dimension 5500x2000x2100 mm -weight 17ton --- Additional accessories available with the machine See layout drawing in enclosed nr.1 central support hydraulic 2.2 ton capacity to support large shell dia up to 4,5 meters id nr.1 side support hydraulic left side 2.2 ton double arm nr. 1 side support hydraulic right side 2.2ton double arm

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, control type: manual, degree of automation: manual, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 150 mm, roller (top) diameter: 170 mm, side roll diameter: 150 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 700 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 1,500 kg, total length: 2,500 mm, total width: 800 mm, total height: 1,100 mm, power: 5 kW (6.80 HP), input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, PLATE ROLL 2000x6 mm SERGI 3ROLL INITIAL PINCH ASYMMETRIC 2050 X6 MM Rolls length 2050 mm -Top roll 170 mm -lower/Side rolls 150 mm -Power electric 5,5 Hp Capacity -plate width 2000 mm -plate thickness 6 mm with prepinch Configuration on the machine -Rollers surface hardened high strength -Central rolls driven electric rotation on gearunit -side roll electric run with prepinch Iiedpfx Aex Ewa Eecrec Pinch roll position with handwheel Front open manual drop-end -Readout gauge of side bending roll -Foot-pedal electric rollers rotation back/forth -Joystick electric control of side roll -Safety installations with emergency stop.

Condition: new, THREAD ROLLING ROLLERS Iiedpezdv Trjfx Acrsc