Used Wide belt sanders 1200-1299mm working width for sale (18)

Condition: new, - New - Description: - The ideal cylinder grinding machine for the ambitious do-it-yourselfer - Infinitely adjustable feed speed from 0 - 3.5 m / min for optimal sanding results - The grinding unit is set using a height adjustment crank and scale quickly and accurately to the Workpieces adapted - Serially with suction device - For the use of commercially available Suitable for abrasive cloth Technical specifications: Dimensions and weights Length approx. 1030 mm Width / depth approx. 950 mm Height approx. 1300 mm Weight approx. 85 kg Bwgchg7Vgj Connection suction Extraction nozzle diameter 100 mm Electrical data Drive motor power 1.5 kW Connection voltage 230 V Mains frequency 50 Hz Grinding unit Grinding width max. 405 mm Sanding roller width 410 mm Feed unit Feed speed 0 - 3.5 m / min workpiece Height max. 130 mm Scope of delivery: - suction device - front table extension - rear table extension Driving device Item No. 5901405

Condition: good (used), Sandingmaster 600 mm. sandingmachine. Drum aggregate sh 80, Pad aggregate. Calibration and fine sanding. Dpl3Gx Sandingmaster SCSB 2 900 Max 600mm wide sanding Max 150mm sanding height Sanding belt dimensions 630x1900mm Required extraction capacities 3000 m3/h 380V all in full working condition.

Condition: used, Year of construction: 1983, BOTTOM WIDE BELT SANDER 8Kqossus0 Brand : DMC Type: I-C-LCL 130/RP-S Serial no.: 57-114-83 Year : 1983 CAPACITIES Workpiece width: 20 to 1300 mm Workpiece height (thickness): 3 to 110 mm Workpiece length: from 200 mm Feed speed: 6.5 to 20 m/min Average sanding belt speed: 25m/sec MACHINE COMPOSITION : - 3 infeed and outfeed rollers - Conveyor belt on top Variable feed speed - 1st belt on rigid rubber cylinder - 2nd triangulated belt on 2 metal cylinders and central pad - Motorized exit brush - Belt blowers - Electric raising and lowering Digital display of infeed height OTHER FEATURES : - Power supply: 380v+N+T - Installed power: 35KW - Pneumatic supply 5-6 bars average consumption 600l/min - Suction 2 x Ø200mm recommendation: 8100 m3/h Transport dimensions: 2300 x 1750 x h.2250 mm Weight: 900 kg Machine offered as is.

Condition: ready for operation (used), Year of construction: 1999, Technical data: Grinding width - 600 mm Number of grinding units 4( 2 grinding guts and 2 calibrating shafts) Electronic sectional viscera Vacuum table Table height: adjustable 0,2 - 40 mm Control HEESEMANN SMA PC11/40 Processing height 0,2 - 40 mm Pxa9Fu Width of the segment 600 mm Belt speed max in 24 m/s Gradually adjustable belt speed Feed rate max 25m/min Blasting machine - grinding belt Segment control- electromagnetic Configuration of aggregates p-t-s Belt exchange side- Right

Condition: new, Technische Daten: - Arbeitsbreite 1300 mm - min. Werkstücklänge 580 mm - min. / max. Durchlasshöhe 3 / 110 mm - Vorschubgeschwindigkeit stufenlos 3 - 30 m/min. 1. Schleifaggregat: - gerillte Kontaktwalze stahl - Motor 37 kW / 400 V - Kalibrierwalze FI 240 mm - Schleifbandgeschwindigkeit 20 m/s 2. Schleifaggregat - gerillte Kontaktwalze 80 sh - Motor 22 kW / 400 V - Kalibrierwalze FI 240 mm - Schleifbandgeschwindigkeit 20 m/s 3. Schleifaggregat - Kombiaggregat Walze 70 sh / Schuh - Motor 18,5 kW / 400 V - gummierte und gerillte Kontaktwalze FI 210 mm 7H2Du9Rgcw - Einsatzsteuerung Einlauf / Auslauf - Schleifbandgeschwindigkeit 16 m/s - Motor Vorschub 4,0 kW - Motor Höhenverstellung 0,75 kW - Gesamtleistung 82,62 kW - Schleifbandabmessung 1330 x 2200 mm - Druckluft 8 bar - Luftverbrauch 17 m3/h - automatische Teppichzentrierung - Digitalanzeige mit automatischer Werkstückstärkeneinstellung - CIGO Gummi-Transportteppich - automatische Stern-Dreieck Schaltung - pneumatisch Bandspannung - Überdicken-Sicherung mit Selbstauslösung - Ampermeter zur Überwachung der Spanabnahme - Sofort-Stop mit Scheibenbremse bei Störung - pneumatische Schleifbandreinigung - Entstaubungsbürste im Auslauf - CE Norm, TÜV Rheinland - Abmessungen L=2040, B=3060, H=2180 mm - Gewicht 5100 kg

Condition: excellent (used), Belt sander - a highly efficient machine for processing furniture boards, wood, plastics and metal. - Ideal for pre- and final preparation. - It has unlimited possibilities of paper gradation adjustment - Sliding belt table and its adjustment make it possible to grind material up to 100 mm thick. - The machine is equipped with a dust extraction system from the inside after connecting with pipes fi 100 mm to industrial vacuum cleaners, dust extractors, etc. - The machine does a great job as a rough pick-up machine for the top layer of material. Lo3Uubl -Belt table conveys material under 2 sanding belts. - Adjustment of the thickness of the material is done by adjusting the table and is carried out through a panel with a digital display. - The rotations of the tape drive shafts are smoothly regulated by potentiometers through inverters, which gives extremely precise control of each shaft. - The working width is 1300 mm.

Condition: used, Year of construction: 2002, With 2 sanding units - calibration roller - 1 piece link shoe unit Bg0Kyaerwpm - dust brush used, good condition make DMC type Technosand 1100 M2 year of manufacture 2002 machine . SA/004640 - 051828 Working width approx. 1100 mm Passage height approx. 170 mm CE type-approved Number of units 2 pieces 1 calibration roller 18.5 kW Steel fluted with pneum. diameter 220 mm belt blow-off unit 1 piece shoe unit electric link shoe - air shoe 3 belt speeds belt blow-off unit space requirement approx. 2300 x 2000 x 2500 mm weight approx. 2600 kg storage location 97447 Gerolzhofen, free loaded, unpacked handover in actual condition as inspected, without guarantee and warranty

Condition: new, Technische Daten: - Arbeitsbreite 1300 mm - min. Werkstücklänge 580 mm - min. / max. Durchlasshöhe 2 / 110 mm - Vorschubgeschwindigkeit stufenlos 3 - 28 m/min. 1. Schleifaggregat: - gummierte und gerillte Kontaktwalze 80 sh - Motor 37 kW / 400 V - Kalibrierwalze FI 240 mm - Schleifbandgeschwindigkeit 20 m/s 2. Schleifaggregat - Kombiaggregat Walze 70 sh / Schuh - Motor 22 kW / 400 V - gummierte und gerillte Kontaktwalze FI 210 mm - Einsatzsteuerung Einlauf / Auslauf - Schleifbandgeschwindigkeit 18 m/s 3. Entstaubungsbürste Ciq9D09V3Q - Motor 0,37 KW - Motor Vorschub 3,0 kW - Motor Höhenverstellung 0,55 kW - Gesamtleistung 62,92 kW - Schleifbandabmessung 1330 x 2200 mm - Druckluft 8 bar - Luftverbrauch 17 m3/h - automatische Teppichzentrierung - Digitalanzeige mit automatischer Werkstückstärkeneinstellung - CIGO Gummi-Transportteppich - automatische Stern-Dreieck Schaltung - pneumatisch Bandspannung - Überdicken-Sicherung mit Selbstauslösung - Ampermeter zur Überwachung der Spanabnahme - Sofort-Stop mit Scheibenbremse bei Störung - pneumatische Schleifbandreinigung - Entstaubungsbürste im Auslauf - CE Norm, TÜV Rheinland - Abmessungen L=2040, B=2650, H=2160 mm - Gewicht 3900 kg

Condition: used, Year of construction: 1988, Operating hours: 2,420 h, with structuring unit With 1 sanding unit consisting of: Dpjd7D - 1 piece combination unit with air shoe - structuring brush - dust brush used, good condition, little used, few operating hours - 2420 h make Bütfering type AWS 1100 year of manufacture 1988 machineNo. 9727264 operating hours 2424 GS-tested number of units 1 piece 1 Srück combination unit with rubberized roller fluted controlled air shoe belt dimensions approx. 1900 mm x 1100 mm suction connection D 2 x 200 mm space requirement approx. 2100 mm x 2000 mm x 1900 mm weight approx. 2000 kg storage location 97447 Gerolzhofen, free loaded, unpacked delivery as seen, without guarantee and warranty

Condition: new, - Arbeitsbreite 1100 mm - min. Werkstücklänge 470 mm - min. / max. Durchlasshöhe 2 / 160 mm - Vorschubgeschwindigkeit stufenlos 5 - 25 m/min. 1. Schleifaggregat: - gummierte und gerillte Kontaktwalze 80 sh oder steel roller - Motor 22 kW / 400 V - Kalibrierwalze FI 190 mm - Schleifbandgeschwindigkeit 21 m/s 2. Schleifaggregat - Kombiaggregat Walze 70 sh / Schuh - Motor 15 kW / 400 V - gummierte und gerillte Kontaktwalze FI 160 mm - Einsatzsteuerung Einlauf / Auslauf - Schleifbandgeschwindigkeit 18 m/s - Motor Vorschub 1,5 kW - Motor Höhenverstellung 0,37 kW - Gesamtleistung 28 kW - Schleifbandabmessung 1130 x 2200 mm - Druckluft 8 bar - Luftverbrauch 17 m3/h - automatische Teppichzentrierung - Digitalanzeige mit automatischer Werkstückstärkeneinstellung - automatische Stern-Dreieck Schaltung - pneumatisch Bandspannung - Überdicken-Sicherung mit Selbstauslösung - Ampermeter zur Überwachung der Spanabnahme - Sofort-Stop mit Scheibenbremse bei Störung - pneumatische Schleifbandreinigung - Entstaubungsbürste im Auslauf - CE Norm, TÜV Rheinland Hprtqyt - Absaugstutzen 2 x 160 mm, 2 x 120 mm, 1 x 150 mm - Abmessungen L=1795, B=2150, H=2080 mm - Gewicht 2300 kg

Condition: new, - NEW - GENERAL FEATURES: machine frame and worktable * steel structure with electrical cabinet at the front of the machine * sanding belt infeed from the left side of the machine * motorized table height adjustment * main motor integrated in the machine frame electrical equipment * electromechanical control panel on the front left side of the machine * automatic star-delta start for the main motor * motor protection switch for the motors * motors in insulation class IP 54 emergency and protective devices * Safety microswitch for excess thickness * Automatic brake for immediate stopping of the units * Emergency stop safety edge in the workpiece infeed * Mushroom switch in the workpiece infeed and outfeed * Lockable main switch * Automatic emergency shutdown of the machine in the event of: - sanding belt breakage - untensioned sanding belt - protection against lateral movement of the sanding belt - lack of compressed air - overload of the main motors Note: the standard version with 400 volts 50 Hz requires a three-phase power supply zero conductor ground wire. If the 400 volt power supply is without neutral, a single-phase transformer from the price list must also be ordered. The same transformer must also be ordered for a machine with a voltage higher than 400 volts, regardless of whether a neutral conductor is present or not. The machine version with 220 or 230 volts (50 or 60 Hz) is subject to additional costs (see price list). BASIC MACHINE STANDARD EQUIPMENT - R140/85 rubber-coated calibrating roller diam. 140 mm 85 Sh - 1st pos. - R160/45 rubber-coated sanding roller diam. 160 mm 45 Sh - 2nd pos. - Hard sanding pad with manual adjustment of the working height - Main motor 11 kW (15 HP) - Electronic ammeter for the main motor to display the power consumption - Electronic display of the working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Kickback protection in the infeed in front of the first unit - Rubber feed carpet 60 Sh - Roller table with two rollers in the infeed and outfeed of the work table - Carpet feed with two speeds 4,5 / 9 m/min with geared motor - automatic carpet centering working width mm 1.100 Min./Max. working height mm 4 - 170 Sanding belt width mm 1,115 Sanding belt length mm 2,150 Main motor power kW (HP) 11 (15) Gear motor kW (HP) 0.45/0.8 (0.6/1.1) Feed speed m/min 4.5/9 Consisting of: 10.90.87 European Safety Regulations(Mark C.E.) 93.07.31 Volt 400 EU 93.12.01 Frequency 50 Hz 44.44.19 Version "B" for RCS 33.31.50 Roller table in infeed and outfeed for long workpieces 62.44.50 10" control panel with "eye-S" software integration Gqciu7J0 31.21.60 "RA" inclined ribbed steel contact roller - 1st unit 97.50.71 Main motor 15 kW (PS 20)

Condition: new, Technische Daten: - max. Arbeitsbreite 630 mm - min. / max. Durchlasshöhe 3 / 160 mm - min. Werkstücklänge 500 mm - Schleifbandabmessungen 650 x 2100 mm - Vorschubgeschwindigkeit 5 - 27m/min. 1. Schleifaggregat: - gerillte Stahlwalze Durchmesser 200 mm - Motor 11 kW / 400 V - Schleifbandgeschwindigkeit 19 m/s 2. Schleifaggregat Vsyi9Q - Kombiaggregat Walze 70 sh / Schuh - Durchmesser 200 mm - Motor 7,5 kW / 400 V - gummierte und gerillte Kontaktwalze - Schleifbandgeschwindigkeit 16 m/s 3. Entstaubungsbürste - Motor 0,37 kW - Motor Vorschub 1,5 kW - Motor Höhenverstellung 0,37 kW - Gesamtleistung 20,74 kW - Druckluft 6 bar - automatische Teppichzentrierung - automatische Stern-Dreieck Schaltung - pneumatisch Bandspannung - Überdicken-Sicherung mit Selbstauslösung - Ampermeter zur Überwachung der Spanabnahme - Sofort-Stop mit Scheibenbremse bei Störung - Absaugstutzen 5 x 150 mm - Abmessungen L=1280, B=2120, H=2050 mm - Gewicht 1950 kg

Condition: used, Operating hours: 7,805 h, With 2 sanding units consisting of: - calibration roller Btmsqlapji - Combination unit with grinding shoe with a new feed carpet second hand Make Sandingmaster Type CSB2-600 Machine no. 7612312 Operating hours 7805.45 Working width 600 mm Passage height approx. 150 mm Aggregates from above 2 pieces Belt dimensions 630 mm x 1900 mm Feed speed 7/14 m / min. 1 piece calibration roller 7.5 kW Diameter 250 mm 1 piece combination unit 7.5 kW with rubberized roller Air shoe Required space approx. 1600 mm x 1700 mm x 2200 mm Total connected load approx. 16.22 kW Storage location 97447 Gerolzhofen, free on truck, unpacked Handover in the current condition as viewed, without overhaul, without guarantee and warranty

Condition: used, Year of construction: 1995, With 2 sanding units consisting of: - 1 calibrating roller - 1 combination unit with electronic shoe - dust brush with feed carpet as good as new, replaced approx. 2 years ago used make Ott type Megatronic 13 year of manufacture 1995 . E-79023 Working width approx. 1360 mm Passage height approx. 3-160 mm CE type-tested Number of units 2 pieces Feed speed 5 10 m/min 1 piece rubberized calibrating roller 1 piece rubberized roller combination unit electronic link shoe Belt dimensions 1900 mm x 1380 mm Suction connection D 2x150 mm, 1x120 mm Space requirement approx. 2000 mm x 2000 mm x 2000 mm weight approx. 1300 kg Bhhjok0Dgu total connected load approx. 16.5 kW storage location 97447 Gerolzhofen, free loaded, unpacked delivery as seen, without guarantee and warranty

Condition: new, - NEW - DESCRIPTION For grinding, deburring and removing old paint or rust Feed speed continuously adjustable via potentiometer Stable construction for high grinding accuracy Table extension at the inlet and outlet Simple height adjustment of the sanding unit using a crank Lateral grinding head holder can be removed for processing wider workpieces Easy replacement of the sandpaper Closed substructure with cabinet system and storage compartment TECHNICAL SPECIFICATIONS Dimensions and weights Length (product) approx. 1070 mm Height (product) approx. 1150 mm Width / depth (product) approx. 1080 mm Weight (net) approx. 116 kg Connection suction Extraction nozzle diameter 100 mm Work table (s) Working table length 592 mm Table height 695 mm Working table width 505 mm Electrical data Feed motor power 80 W Drive motor power 1.1 kW Connection voltage 230 V Mains frequency 50 Hz Grinding unit Sanding belt length 3280 mm H2Nscbt Sanding width max. 555 mm Sanding belt width 78 mm Grinding height max. 80 mm Sanding surface width 555 mm Feed unit Feed speed 0 - 3.5 m / min workpiece Workpiece height at least 5 mm Workpiece length at least 120 mm Workpiece height max. 80 mm SCOPE OF DELIVERY Tool kit Sanding roller K80

Condition: used, Year of construction: 2000, With 2 sanding units consisting of: - calibrating roller - combination unit with rigid shoe - roller table at infeed 350 mm - roller table at outfeed 350 mm used make SCM - DMC - Technosand type TC 1100 MC year of manufacture 2000 machine . SA / 004295 Working width approx. 1100 mm Passage height approx. 160 mm CE type-approved Number of units 2 pieces Coecpbzchx Belt dimensions 2630 mm x 1150 mm 1 piece calibration roller 22 kW fluted 1 piece combination unit 11 kW with rubberized roller Diameter 180 mm with fixed shoe Suction connection D 4 x 120 mm / 2 x 200 mm Space requirement approx. 1900 mm x 2300 mm x 2600 mm total connected load approx. 44 kW storage location 97447 Gerolzhofen, free loaded, unpacked delivery as seen, without overhaul, without guarantee and warranty

Condition: used, Year of construction: 2000, With 1 sanding unit consisting of: - combination unit with electronic shoe for lacquer sanding - lacquer sanding Dpjd3Z - dust brush - roller table at infeed 270 mm - program control electronic f. 50 programs with brand-new feed carpet used make Bütfering type Classic 111 C year of construction 2000 machineNo. 63608 Working width 1100 mm Passage height 160 mm CE type-tested GS wood dust tested Belt dimensions 1120 mm x 1900 mm Feed speed 4 8 m/min. 1 piece combi unit 3.7/7.5 15 kW , 3 belt speeds with autom. steel roller diameter 130 mm belt speed approx. 4,5 9 18 m/s electronic link shoe segment pitch 50 mm for lacquer sanding workpiece controlled storage location 97447 Gerolzhofen, free loaded, unpacked delivery as seen, without guarantee and warranty

Condition: used, Year of construction: 1989, With 2 pcs. Grinding units consisting of: - 1 pc. calibration roll - 1 pc. Shoe unit rigid - Dust brush - Roller table at the infeed 350 mm - Roller table at the outlet 350 mm second hand Make SCM Type CL 110/L/RT Year of construction 1989 Machine no. AE004949 Working width approx. 1100 mm Passage height approx. 160 mm Number of aggregates 2 pieces Belt dimension 2150 mm x 1115 mm Feed speed 4.5 + 9 m/min. Cg98R278Bj 1 pc Calibration roller rubberized Belt speed approx. 18 m/s Diameter 210mm Extraction connection D 160/160/160 mm Space requirement approx. 1605 mm x 1740 mm x 2070 mm Weight approx. 1800 kg Total connection value approx. 16.5 kW Storage location 97447 Gerolzhofen, freely loaded, unpacked Handover in the current condition as seen, without guarantee and guarantee