Used Stama Mc 535 Sm Single for sale (12,438)

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg Hfodsg Ewwrepfx Af Eoh -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser -oil sump heater -drainage device -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: used, Year of construction: 2003, turning diameter 430 mm Hedpfx Aey Sblxef Esfh turning length 519-525 mm control Mori seiki MSX-805 x-axis 230 mm z-axis 520 mm weight of the machine ca. 4100 kg

Condition: good (used), Year of construction: 2005, functionality: fully functional, Cotrol system Fanuc 21iB. Probe Marposs T36. X ... 1200 mm Hfsdpfx Afsyk D R Te Eeh Y ... 600 mm Z ... 640 mm Table ... 1300x620 mm Max. table loading ... 800 kg Taper in spindle ... ISO 40 Spindle revolutions ... 50 - 8000 rpm Number of tools in tool changer ... 24 ks Machine dimensions ... 2001 x 3641 x 3158 mm Weight ... 7000 kg

Year of construction: 2020, condition: new, Krauss Maffei Touch panel the newest version for MC5/ MC6 Spare parts width- 37 cm height-47cm length-8cm Hedpfx Aoqvuicef Ejfh

Condition: new, The new Heinola SM chipper canter is now available for sale. It features two 160 kW motors and two chipper heads, each equipped with five straight chipper knives. The total weight of the unit is approximately 14,000 kg. Hedpfewfr Nuex Af Eofh

Condition: used, mileage: 4,70,000 km, power: 320 kW (435.08 HP), first registration: 09/2004, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: red, gearing type: semi-automatic, emission class: euro3, Equipment: all wheel drive, * Mercedes 4144 Actros MP2 hooklift truck Hfodpfxoy Ikixs Af Esh * First registration: 2004 * 470,000 km * Euro 3 * Telligent with clutch * Leaf spring – leaf spring suspension * 8 x 8 * Meiler RK20 body * Container lock * Trailer coupling * Single tires: 600/50 R22.5 * Unladen weight: 14,300 kg * Wheelbase: 4.85 m

Year of construction: 2011, condition: excellent (used), We offer for sale a used SMC Carousel mini load from the manufacturer SSI Schäfer. Technical data: Powerful modular racking system for small goods (miniload), 68 container racks with 12 levels per carousel Container 600x400x310mm, weight 30kg (not included) 1040 transport units per hour Hedpjixl Sqofx Af Esfh Approx. 3,264 storage locations The whole system (miniload, flow racks, sorting system) consists of 4 carousels Length of each carousel approx. 15 m, height approx. 4.5 m Total area approx. 320 m2 Maximum walking speed 0.6 m/s, Location of the machine: 89-600 Chojnice/Poland Machine is disassembled, dry stored and ready for shipment. If interested please contact us

Condition: good (used), Year of construction: 2013, Profile machining center Axis travel X-axis: 7430 mm Y-axis: 1320 mm Z-axis: 500 mm A-axis: +/-90° Working areas X-axis: 7460 mm Hfjdpjvy E Ibjfx Af Eoh Y-axis: 650 mm Z-axis: 250 mm 8 clamping elements Automatic tool magazine with 8 places in a protected housing, for drilling, milling and thread cutting tools, angle head and disc milling cutter, max. Ø 200 mm, + 2 places for 2 angle heads Tool holder ISO 30 In pendulum operation (2 zone machining) the working stroke per zone is limited to 3500 mm

Condition: good (used), Year of construction: 2002, Machine is in good working condition. Hfjdpfjxbqnxex Af Esh Parts shown by hand not come.

Condition: good (used), functionality: fully functional, Inking unit/numbering unit for Heidelberg SM 52 offset printing machine, including numbering device shaft and 4 numbering units with forward counter plus cross perforation. Hjdpfeyvftaex Af Eofh

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Leadermac SMARTMAC LMC 523S Four-Sided Planer Manufacturer: Leadermac, Taiwan S/N 092323 Year of Manufacture: 07/2003 In good condition Working width: 230 mm Working height: 125 mm 5 spindles, spindle diameter: 40 mm Feed table: 2000 mm Configuration: 1st lower horizontal spindle: 7.5 kW 2nd right spindle: 5.5 kW 3rd left spindle: 5.5 kW 4th upper horizontal spindle: 7.5 kW 5th lower horizontal spindle: 7.5 kW Continuously adjustable feed rate up to 24 m/min 3 kW feed motor Electronic height adjustment Electronic adjustment of the left head Feed on cardan shafts Five upper steel rollers Two upper rubber rollers One roller in the table top feed Pneumatic material pressure Minimum material length: 400 mm mm Chrome tables Chamber diameter 5 x 125 mm Machine dimensions L x W x H = 370 cm x 200 cm x 190 cm Weight 3500 kg CE marking Hfedpfewft Ufex Af Esh

Condition: good (used), Year of construction: 2016, power: 18 kW (24.47 HP), Single Advanced Oil D2-180-18-0 – Oil Temperature Control Unit Manufacturer: Single Temperiertechnik GmbH Model: Advanced Oil D2-180-18-0 Hfjdpoyrncisfx Af Ejh Year of manufacture: 2016 Heating capacity: 18 kW Specific heating output: 23.2 kVA Rated current: 32 A Supply voltage: 3×400 V / N / PE Frequency: 50 Hz Max. temperature: 180°C Max. operating pressure: 3.1 bar Safety valve: 6.0 bar Medium: heat transfer oil Max. external filling quantity: 22 litres Net weight: 169 kg Dimensions: standard design (according to unit type) Application: temperature control for industrial processes, tooling, plant modules Location: Schierling

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, A used CNC turning and milling center Main and counter spindle C axis Y axis Hfodpfxey D Tz No Af Ejh Further technical data will be added.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, turning length: 1,337 mm, turning diameter: 420 mm, General Control: Siemens 828 D Turning diameter: 420 mm Turning length: 1,337 mm Hfedpfjx Ag Hmsx Af Eeh Swing diameter: 700 mm Bar capacity: 89 mm Rapid traverse speed: 20 / 10 / 24 m/min Main spindle Bar capacity: 89 mm Chuck size: 305 mm Speed: 2,500 rpm Spindle power: 22 kW Spindle torque: 1,050 Nm Sub spindle Speed: 4,000 rpm Spindle power: 12 kW Spindle torque: 122 Nm Tool turret Technology: 12 stations Tool drive: 5,000 rpm Power: 9.4 kW Torque: 90 Nm Tool holder: BMT-65 / BH Travel X: 280 mm Travel Y: 120 mm Travel Z: 1,390 mm Equipment Chip disposal: chip conveyor Coolant capacity: 240 liters Tool measurement: measuring arm in the working area Part discharge: parts catcher Bar feeder: prepared

Year of construction: 2018, condition: as good as new (ex-display), functionality: fully functional, We are offering this display machine SM Innotech Laminator Incapcell 35-18, year of manufacture 2018. Hfodpfxsy Druuj Af Ejh Manufacturer: SM Innotech GmbH & Co.KG Model: Incapcell 35-18 Year of manufacture: 2018 Condition: Display machine Category ID: 33 Machine type: Laminator There are 2 units of this system available; both are new as they have never been used. If you have any questions or require further information, please send us a message or call us.

Year of construction: 2019, condition: used, We are offering this used SM Innotech GmbH & Co.KG Incapcell 22-18 laminator, year of manufacture 2019. The system has very low operating hours, as it was used as a test machine for trial purposes. Individual software updates or other modifications can be provided according to requirements and at additional cost. The system is available for immediate delivery. Hfjdpfx Asy Dq D Iof Eoh If you have any questions or need further information, please feel free to send us a message or give us a call.

Year of construction: 2000, condition: ready for operation (used), travel distance X-axis: 3,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 2,200 mm, spindle motor power: 27,000 W, spindle speed (max.): 3,000 rpm, number of axes: 3, This 5-axis San Rocco FMC 110/S-MMZ CNC ECS 4801 (OE) was manufactured in 2000. It features a horizontal spindle orientation, a table size of 1,300 x 1,100 mm, and a tool magazine with 30 positions. Spindle speeds range from 20 to 3,000 rpm, and it includes a continuous rotary table. Consider the opportunity to buy this San Rocco FMC 110/S-MMZ CNC ECS 4801 (OE) boring machine. Contact us for more information about this machine. • Table size: 1,300 x 1,100 mm • W-axis travel (boring head): 600 mm • B-axis rotation (rotary table): Continuous • Spindle orientation: Horizontal • Tool magazine: 30 positions Hodpfx Ajyguz Uof Esfh Technical Specification Taper Size ISO 50

Year of construction: 2010, condition: ready for operation (used), overall weight: 200 kg, total height: 1,800 mm, product length (max.): 800 mm, table width: 1,500 mm, number of axes: 3, This 3s Zoller SMC 4/4-00060 was manufactured in 2010. It features a measuring range of 215 mm on the X-axis and 415 mm on the Z-axis, making it suitable for high-precision applications. With a high-precision spindle SK-50 and additional features like a spindle brake and 4 x 90° spindle locks, consider the opportunity to buy this Zoller SMC 4/4-00060 optical measurement machine. Contact us for further details. • Measuring range X-axis: 215 mm • Measuring range Y-axis: 0 mm • Measuring range Z-axis: 415 mm • Voltage: 230 V • High-precision spindle: SK-50 • Runout accuracy: 0.002 mm • Spindle brake • 4 × 90° spindle locks Additional equipment • Adapter SK-50 / HSK-A63 Hfjdpeykp Tgefx Af Eoh

Condition: used, Year of construction: 1992, Measuring range X-axis 2400 mm Hfsdog Er Nljpfx Af Ejh Measuring range Y-axis 1200 mm Measuring range Z-axis 1500 mm Machine weight approx. 9,00 t

Condition: as good as new (ex-display), Year of construction: 2023, • Hwacheon Cutex 180 AL SMC, year of manufacture 2023, new machine • CNC control: Fanuc 0i-TF Plus LCD with Manual Guide I • Rapid traverse X / Z / B: 36 / 36 / 36 m/min • Max. turning diameter: Ø 300 mm • Max. turning length: 478.5 mm • Chuck size: 6" / Ø 150 mm, 5" / Ø 120 mm • Max. spindle speed: Main spindle 6,000 rpm / Sub-spindle 6,000 rpm Hfjdsyypvbjpfx Af Eeh • Bar capacity: Ø 51 / 32 mm • Main/sub-spindle motor power: 11 / 15 kW, 3.7 / 5.5 kW • 12-station turret, all stations driven • 5,000 rpm, 3.7 / 5.5 kW • Robust full slant bed made from stabilized Meehanite cast iron with precision linear guides on all axes • High-performance spindles with spindle nose A2-5 / sub A2-4 • Automatic tool measurement arm • Parts catcher • Full enclosure • Hydraulic system • Coolant system with retractable tank, 6 bar pump • Ergonomically designed, swiveling control panel • Electronic handwheel • Waterproof LED work area lighting • Transformer

Condition: as good as new (ex-display), Year of construction: 2023, • Hwacheon Cutex 180 AL YSMC, year of manufacture 2023, new machine • Control: Fanuc 0i-TF Plus LCD with Manual Guide I • Rapid traverse X / Z / B: Hodpeyypuwjfx Af Eofh • 36 / 36 / 36 m/min • Y-axis travel: +/- 55mm • Max. turning diameter: Ø 300mm • Max. turning length: 478.5mm • Chuck size: • 6” / Ø 150mm, 5” / Ø 120mm • Max. spindle speed: • Main spindle 6,000 rpm • Sub spindle 6,000 rpm • Bar capacity: Ø 51 / 32mm • Main/Sub spindle motor power: • 11 / 15 kW, 3.7 / 5.5 kW • 12-station turret, all stations driven • 5,000 rpm 3.7 / 5.5 kW • Robust one-piece slant-bed made from stabilized Meehanite cast iron, with precision linear guideways on all axes • Powerful spindles with spindle nose A2-5 / Sub A2-4 • Automatic tool presetter • Parts catcher • Full enclosure • Hydraulic system • Coolant system with movable tank, 6 bar pump • Ergonomic pivoting control panel • Electronic handwheel • Waterproof LED work area lighting • Transformer

Condition: used, Year of construction: 1988, machine/vehicle number: 22, Messsystem für Polar 155 EMC Duxon SMD / Measuring System for Polar 155 EMC Duxon SMDSerial-No. 022 490 Messsystem für Polar 155 EMC Duxon SMD Measuring System for Polar 155 EMC Duxon SMD Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Hfedpfsiqlmljx Af Eeh

Condition: used, Year of construction: 2020, Servo motor, electric motor, DC motor, servo geared motor, synchronous motor -Handover: in its current condition as inspected -Connector plug: Damage, see photos Hfedpfxoyh Ufgj Af Eoh -Manufacturer: Siemens Wittenstein, servo geared motor -Synchronous motor: Siemens type 1FK7101-2AF71-1RG0 -Voltage: 278 V -Gearbox: Wittenstein SP 100S-MC1-3 -1K1-2K i= 3 -Shaft: Ø 32 x 55 mm -Protection class: IP64 -Dimensions: 450/190/H255 mm -Weight: 33 kg

Condition: good (used), Year of construction: 2020, Servo motor, electric motor, DC motor, servo geared motor, synchronous motor -Manufacturer: Siemens Wittenstein, servo geared motor -Synchronous motor: Siemens type 1FK7101-2AF71-1RG0 -Voltage: 278 V -Gearbox: Wittenstein SP 100S-MC1-3 -1K1-2K i= 3 -Shaft: Ø 32 x 55 mm -Protection class: IP64 -Number: 3 servo motors available -Price: per piece -Dimensions: 450/190/H255 mm -Weight: 33 kg/pc. Hedpsyh Huysfx Af Eofh

Condition: excellent (used), Year of construction: 2020, Servo motor, electric motor, DC motor, servo geared motor, synchronous motor -Manufacturer: Siemens Wittenstein, servo geared motor -Synchronous motor: Siemens type 1FK7101-2AF71-1RG0 -Voltage: 278 V -Gearbox: Wittenstein SP 140S-MC1-10 -1K1-2K i= 10 -Shaft: Ø 40 x 80 mm -Number: 2x geared motors available -Price: per piece Hfjdpexr A Nijfx Af Ejh -Dimensions: 490/190/H260 mm -Weight: 41.2 kg/pc.