Used Stenhoj Compressor for sale (3,291)

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure Dodpfx Apszu Aibe Dewc - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: excellent (used), Year of construction: 2016, operating hours: 19,000 h, functionality: fully functional, power: 7.5 kW (10.20 HP), volume flow: 700 m³/h, operating pressure: 12 bar, pressure (min.): 4 bar, pressure (max.): 13 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, Fully functional Atlas Copco frequency-controlled screw compressor with built-in cooling dryer. Complete service performed, including replacement of oil, oil filter, air filter, separator filter, and thermostat. Djdpfx Ajz Dpt Ajp Dswc

Condition: new, Year of construction: 2026, LUFT 1000 COMPACT Screw Compressor with Refrigerated Air Dryer and 270 L Compressed Air Tank The LUFT 1000 COMPACT screw compressor with an integrated refrigerated air dryer and a 270 L compressed air tank is a modern solution designed for reliable and efficient compressed air supply. The CORMAK LUFT series screw compressors combine state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. THE SET INCLUDES: LUFT 1000 COMPACT screw compressor with refrigerated air dryer 270 L horizontal compressed air receiver Dwsdpjmqlprofx Ap Doc Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or small production line? The CORMAK LUFT 1000 COMPACT screw compressor with refrigerated air dryer is an excellent choice. With a 7.5 kW motor and an impressive actual output of up to 990 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. It can also be used as a compressor for small sandblasting machines. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, automotive workshops and small manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The screw compressor is also equipped with an integrated refrigerated compressed air dryer, which provides dry and clean air while protecting the compressed air system against corrosion and damage. The LUFT 1000 COMPACT oil-injected screw compressor with dryer features a traditional belt drive, resulting in easier maintenance and lower servicing costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and a worn belt can be easily replaced with a new one. Extended Component Service Life The belt drive also contributes to longer component life. The absence of a rigid connection between the motor and the compressor's working components reduces mechanical wear and stress, helping to extend the service life of the system. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key machine information and greater flexibility and control over the production process. Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 990 l/min ✅ Motor power: 7.5 kW Technical Specifications Parameter Specification Motor power 7.5 kW Voltage 400 V / 50 Hz Output at 0–6 bar 990 l/min Output at 6 bar 950 l/min Output at 8 bar 950 l/min Output at 10 bar 930 l/min Outlet connection diameter (G) 3/4" Compressor dimensions 1320 × 650 × 945 mm Dimensions with tank 1495 × 1200 × 1545 mm Weight 350 kg

Condition: good (used), Motor output 1 kW Max. pressure 16 bar Dwjdpfx Apevwgn Re Dsc

Condition: used, ATLAS COPCO Dwodpfx Ajuruf Nsp Dsc TYPE: ZR90 SCREW COMPRESSOR

Condition: used, Year of construction: 2017, feed pressure / bar liter capacity / l Dwsdoxy S H Tjpfx Ap Dec Air consumption / m³/h

Condition: repair required (used), Year of construction: 2004, Schneider compressed air screw compressor defective Dodpfxovmivcj Ap Djwc System needs to be repaired. Machine is being sold cheaply because it needs to be repaired. Engine power: 11 KW Volume flow: 1500 liters/min Compressor pressure: 10 bar Location: from warehouse 54634 Bitburg Machine is being sold as defective Without guarantee - without warranty -

Condition: as good as new (ex-display), Year of construction: 2022, Kaeser screw compressor SM 13 - 11 bar exhibition piece at a special price Djdsvk R A Sepfx Ap Dowc Volume flow at 11.0 bar (g) 1.07 m³/min Electrical power consumption of the entire system at 11.0 bar (g) 9.63 kW Specific power 9.00 kW/(m³/min) Maximum overpressure 11.0 bar Drive motor efficiency at full load 91.7% Drive motor efficiency class IE4 Nominal drive motor power 7.5 kW Drive motor speed 2955 rpm Drive motor protection class IP 55 Electrical supply 400 V / 3 Ph / 50 Hz Compressed air outlet temperature above ambient temperature (at +20°C, 30% relative humidity) 8 K Sound pressure level 65 dB(A Compressed air connection G 3/4 Location: From stock 54634 Bitburg - available immediately -

Condition: excellent (used), Year of construction: 2019, S016950 PROD. ALUP TYPE LARGO37 S/N API588037 YEAR 2019 POWER (kW) 37 CAPACITY (m3/min) 6.66 DISCHARGE PRESSURE (bar) 7.5 Dwsdpfxszuc S Aj Ap Dec HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON-TANK MOUNTED no DOCUMENTS no CONNECTION 1 1/2 NEW/USED USED WARRANTY ON THE SCREW COMPRESSOR STAGE - 6 MONTHS!!!

Condition: excellent (used), Year of construction: 2012, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 2522105, overall weight: 8,000 kg, total length: 4,000 mm, total width: 210 mm, total height: 2,000 mm, ambient temperature (min.): 35 °C, ambient temperature (max.): 35 °C, Mayekawa (MYCOM) N2520LMC-LBM – 490 kW, NH₃, two-stage compressor – only 7000 hours For sale: a Mayekawa (MYCOM) N2520LMC-LBM two-stage compressor, designed for industrial ammonia (NH₃) refrigeration systems. The unit has only operated for approximately 7000 hours. It comes complete with a control cabinet and a Danfoss soft starter. The system is equipped with thermosyphon cooling. Dwjdezudabepfx Ap Dsc Key specifications: Manufacturer: Mayekawa (MYCOM) Model: N2520LMC-LBM Type: two-stage compressor Refrigerant: ammonia (NH₃) Refrigeration capacity: 490 kW Oil cooler capacity: 179 kW Operating parameters: -40°C / +35°C Operating hours: only approximately 7000 hours Cooling: thermosyphon Control cabinet: included Soft starter: Danfoss – included Drive power: the attached documentation shows a drive with a rated power of 315 kW. Advantages of a two-stage compressor: Two-stage compression is particularly beneficial at low evaporation temperatures and high compression ratios. • High efficiency at low temperatures – this solution works very well at temperatures around -40°C. • High refrigeration capacity – 490 kW – the compressor can be used in large, industrial refrigeration systems. • Improved compressor operating conditions – compression takes place in two stages, which means that the individual stages are less stressed than in a single-stage system with a similar total compression ratio. • Lower discharge temperature – two-stage compression allows the discharge temperature to be reduced, which has a positive effect on the system's operation and durability. • Good energy efficiency at high compression – particularly important in systems operating at low temperatures. • Ideal for industrial refrigeration – including freezers, cold rooms, food processing plants, cold storage warehouses, and technological installations. Included: The set for sale includes: Mayekawa (MYCOM) N2520LMC-LBM compressor, control cabinet, Danfoss soft starter, oil cooling system using a thermosyphon. Only 7000 operating hours: One of the biggest advantages of the unit is its very low operating time – approximately 7000 hours. The compressor offers 490 kW of refrigeration capacity and is ready to operate with NH₃ in demanding industrial conditions. Mayekawa (MYCOM) N2520LMC-LBM | 490 kW | NH₃ | -40/+35°C | 7000 hours | thermosyphon cooling | oil cooler 179 kW | control cabinet | Danfoss soft starter Please contact me for details, technical documentation, photos, and the possibility to view the unit.

Condition: like new (used), Year of construction: 2026, functionality: fully functional, overall weight: 1,080 kg, total length: 2,200 mm, total width: 1,300 mm, total height: 2,100 mm, power: 22 kW (29.91 HP), Frequency-controlled screw compressor, 22 kW, 4-in-1 With compressed air treatment for laser applications Dwsdpfx Apszw A Tfo Doc Attached refrigeration dryer Integrated 4-stage fine filter for clean, oil-free compressed air supply Working pressure -1.6 MPa (approx. 16 bar) Delivery rate 2.3 m³/min at 1.6 MPa Integrated pressure vessel, approx. 550 l

Condition: excellent (used), Year of construction: 2013, overall weight: 403 kg, volume flow: 2.2 m³/h, operating pressure: 10 bar, pressure (min.): 10 bar, input voltage: 400 V, ATLAS COPCO GA 15 screw compressor Atlas Copco screw element Dodozxzvnjpfx Ap Dowc 15 kW motor Capacity: 2.20 m3/min Pressure: 10 bar Year of manufacture: 2018 Operating hours: 10412 hours Compressor in fully working condition.

Condition: used, Technical specifications: Dwjdozvmriepfx Ap Dec Tank capacity: 500 L Flow rate: 950 l/min Max. pressure: 10 bar Number of pistons: 2 x 2 Power supply: 400 V Engine speed: 2800 rpm Engine power: 2 x 5.5 kW Overall dimensions: Length: 2100 mm Width: 600 mm Height: 1300 mm

Condition: excellent (used), Year of construction: 2002, PROD. KAESER TYPE CSD102T / 100304.0 S/N 1049 YEAR 2002 POWER (kW) 55 OUTPUT (m3/min) 10.1 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER yes HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no Dsdpfx Apjzwnyke Dewc DOCUMENTS no CONNECTION 2 NEW/USED USED

Condition: excellent (used), Year of construction: 2011, volume flow: 3.21 m³/h, operating pressure: 8 bar, pressure (min.): 10 bar, Boge C 30 D screw compressor With desiccant dryer 22 kW motor Capacity: 3.21 m3/min Pressure: 10 bar Year of manufacture: 2011 Operating hours: 16,300 hours COMPRESSOR IS IN FULLY WORKING CONDITION. NET PRICE: 14,000,- Djdpsywz Hmjfx Ap Djwc GROSS PRICE: 17,220,-

Year of construction: 1994, condition: good (used), Manufacturer: Boge Type: V LEX 45 Engine: 45 kW Capacity: 6.5 m³/min Dwjdpfohtq Dvjx Ap Djc

Condition: excellent (used), CompAir L 75 compressor Dwedpfx Apoh U R Rwe Doc Operating hours approx. 3100 h (hours under load) Used as a backup compressor Volume flow rate 10.25 m³/min Motor power 75 kW In very good, ready-to-use condition, directly from production!!!

Condition: used, Year of construction: 2003, Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in its current condition as inspected -defective, not functioning, problem: frequency converter does not communicate with the software -Delivery rate: 3.2-6.9 m³/min -Engine power: 18-24 kW -Structure: encapsulated -Max. pressure: 12.75 bar -Operating hours: 108252 h -Load hours: 30754 h -Year of manufacture: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg Dwjdjhabk Depfx Ap Djc

Condition: repair required (used), Year of construction: 2008, Manufacturer: BECS Master Chiyoda Kogyo Co Tip: HWP 501 Year of manufacture: 2007 Max. Tube size 19 mm (1.5 mm wall thickness) Dodporigaiofx Ap Dewc The device is currently not working. PLC error

Condition: excellent (used), Year of construction: 2012, ATLAS COPCO XAS87 COMPRESSOR, 5.00 m3, 12 bar!! DIESEL ATLAS COPCO XAS87 compressor, serviced. Technical data: Dodpfx Apjtyk Taj Djwc Capacity: 5.00 m3/min; Operating pressure: 7 bar; Year of manufacture: 2012; Engine: KUBOTA Operating hours: 1397 h!!! The compressor is in full working order, ready for operation, and comes with a warranty. Net price: 32,500 PLN Gross price: 39,975 PLN Below is a link to a video showing the machine in operation.

Condition: good (used), Year of construction: 2005, operating hours: 50,000 h, functionality: fully functional, overall weight: 850 kg, Equipment: refrigerant dryer, Screw compressor, 22 kW, with built-in refrigerated dryer; disassembled but in good condition. Dwodpszb Drxofx Ap Djc

Condition: excellent (used), Kaeser DSD 238 compressor 132 kW Year: 2011 The compressor is water-cooled, making it ideal for dusty environments. Operating hours: 30,000 Unit and engine replaced in 2019 Well-maintained and in perfect working order. Dwjdozbx Rcopfx Ap Dec

Condition: good (used), Year of construction: 2002, functionality: fully functional, overall weight: 700 kg, The 30 kW screw compressor has been disassembled and is ready for shipment. Dwjdszb Dq Ijpfx Ap Dsc

Condition: new, Year of construction: 2024, machine/vehicle number: 6913390001, hoku 113-90 – Robust compressors for professional use with V-belt drive and a high-performance 2-cylinder unit made of cast iron. The universal model with V-belt drive and high-quality components, specifically designed for tradespeople, for use in environments where the quality of compressed air, as well as durability and efficiency, are essential. Long service life thanks to high-performance units with low speeds, safe transport and excellent stability thanks to large wheels with a parking brake, optimal cooling through a large fan wheel, an aftercooler with cooling fins ensures a low tank inlet temperature and thus less moisture in the compressed air, improved efficiency through optimized units, standard equipment includes a Condor pressure switch, pressure gauge, pressure regulator with water separator and quick-release coupling, motor with overload protection. Dwedpfxsvl Euxe Ap Dsc Technical data: Intake capacity 500 l/min, delivery capacity 375 l/min, maximum pressure 10 bar, tank capacity 90 l, cylinders/stages 2/1, speed 1,300 min-1, motor power 3 kW / 400 V Ex works, from the Seevetal location, excluding transport, as inspected, subject to prior sale.

Condition: ready for operation (used), For sale: original Hanomag R35/45. Please submit your offer! Drives well, has no oil leaks, MOT is expired but can be renewed at additional cost. Price negotiable. The vehicle was always stored indoors. Now available for sale. Year of manufacture: 1956, with rare features and a functional Roots blower increasing output to approx. 45 hp. This machine is a technical one-off and is in very good, working condition. Equipment & details: • Type: R35/45 A (agricultural tractor version) • Engine: 4-cylinder diesel engine with mechanically driven Roots blower. Many original stickers and type plates on the machine. Output: approx. 45 hp • Transmission: 5 forward gears + 1 reverse, plus additional reduction (total 10 gears) • Year: 1956 • Rare: Front auxiliary PTO/extra PTO shaft via separate lever • Runs, steers and brakes flawlessly, starts reliably Condition: • Very good overall technical condition • Original appearance with lovely patina • Complete dashboard, inscriptions, lighting, etc. No improvised repairs – all mechanically robust • Ideal as a collector’s item, for vintage meetings or for enthusiasts. Rarity & value: • The Roots blower was only installed in a few models or by Hanomag authorized workshops for power increase. • Such authentic vehicles with working blower and special equipment are extremely rare. Subject to errors. Pictures/description may vary. Dedpfxswvf E Ds Ap Dowc