Used Taath 1224 for sale (101)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5800x2100x2100 mm Weight 4000 kg Total power requirement 20 kw Fpodpfev A Hbujx Ap Dsn

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Fedpfx Apeuxfu Ns Dspn Pr...

Condition: used, mileage: 9,63,000 km, power: 265 kW (360.30 HP), first registration: 04/2013, fuel type: diesel, overall weight: 18,000 kg, brakes: retarder, gearing type: automatic, emission class: euro6, loading space length: 6,500 mm, loading space width: 2,480 mm, Equipment: crane, soot filter, Crane: Fpsdpfxjzm Enqs Ap Dsn ----- Retarder - Air conditioning - Air suspension - Hiab 122, 3x hydraulic, 1x mechanical - Bridge with side loading Suspension: Air suspension

Condition: used, mileage: 3,63,793 km, power: 177 kW (240.65 HP), first registration: 12/2018, fuel type: diesel, overall weight: 11,990 kg, next inspection (TÜV): 11/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 5,422 mm, loading space width: 2,414 mm, loading space height: 2,112 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), tail-lift, ISUZU F2R with refrigerator box and tail lift. Equipment: Cruise control,air conditioning, ABS,ESP, electric windows, multifunctional and adjustable steering wheel, central locking, etc. Fpsdpjzz Ef Eefx Ap Don Please call us at WhatsUp/Viber also) E-mail:

Year of construction: 2015, condition: excellent (used), On behalf of a client from Switzerland, I am offering this machine for sale. It has 5,200 operating hours and is in excellent condition. Used for prototype construction, currently in operational condition. Equipped with: Grinding head UR T1 500 x 80; T2 400 x 63 Fpjdpjgtingsfx Ap Don 1 internal spindle HF MFM 1224/42 1 internal spindle HF MFM 1290 Semi-automatic balancing device KEL-TOUCH on the workpiece spindle head for internal and external grinding KELSET grinding wheel measuring system KELPOS longitudinal positioning Heidenhain CNC GrindPus 640 CNC B-axis, hydrostatic CNC C-axis for polygon and thread grinding KELSOFT NCG for non-circular grinding KELTHREAD for thread grinding KELREMOTE for remote diagnostics Prepared for measuring controls Paper band filter Streuli 480 l Extraction system Available for immediate delivery from Switzerland.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 8,000 kg, first registration: 04/2022, total width: 2,550 mm, total height: 1,320 mm, suspension: air, color: grey, Year of construction: 2022, Equipment: ABS, = Additional Options and Accessories = - Alloy wheels - Air suspension = Notes = Vlastuin / VTR OB-12-24-T - Truck transporter - 2/3 trucks Year of manufacture: Registration: OS-79-YY APK/TUV: Valid until Truck transporter for 2 or 3 trucks 3x tractor unit 2x chassis Rear extension Middle extension Lift axle Built new for us, used only by us. Good condition = Further Information = Fjdjz D A Dbopfx Ap Dspn Axle configuration Suspension: Air suspension Rear axle 1: Twin tires; Alloy wheels; Max. axle load: 10,000 kg Rear axle 2: Twin tires; Alloy wheels; Max. axle load: 8,000 kg Rear axle 3: Twin tires; Alloy wheels; Lift axle; Max. axle load: 8,000 kg Weights Unladen weight: 9,940 kg Payload: 28,060 kg GVW: 38,000 kg Maintenance, History and Condition APK (Technical Inspection): Valid until 04/2027 Technical condition: good Visual condition: good

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO manufactures and installs stationary type stone crushing and screening plants according to customer requirements. Production capacity of our stationary plants differs from 100 to 1000 ton per hour. 150-200 Tons/hour capacity of Screening & Washing Plant: - 30m3 Sand Feeding Hopper Fedpfxszd Euro Ap Dopn -1600x5000mm Vibrating Screen - STE 1224 Dewatering Screen & Hydrocyclone - Conveyor Belts - Control Cabin, Electrick Panel and Cables FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2022, functionality: fully functional, cooling capacity: 96.1 kW (130.66 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,224 kg, input voltage: 400 V, total width: 1,260 mm, total length: 3,300 mm, total height: 2,120 mm, warranty duration: 12 months, AIRCOOLED CHILLER MTA TAEEVO TECH 402 96.1 KW Fpedoz Dt Udopfx Ap Den Cooling capacity: 96.1 kW / 27.32 tons (12/7 — 35°C) Year of manufacture: 2022 Options: Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Finned evaporator immersed in tank Condenser: Copper / Aluminum Compressors: 4 pcs. Copeland ZP103KCE-TFD-477 (scroll) Type of refrigerant: R410A Number of fans: 2 pcs. Hydraulic module: 1 pcs. water pump Lowara PLM112RB14S2/340 E3, expansion vessel. Dimensions: 3.3x1.26x2.12 m Weight: 1224 kg Working hours: 0/0/0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, mileage: 1,85,000 km, power: 175 kW (237.93 HP), first registration: 04/2014, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, next inspection (TÜV): 04/2026, color: white, gearing type: automatic, emission class: euro6, total length: 9,230 mm, total width: 2,550 mm, total height: 3,630 mm, loading space length: 7,300 mm, loading space width: 2,490 mm, loading space height: 2,500 mm, Year of construction: 2014, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, * NET PRICE * Automatic transmission * Leaf / Air suspension * Air conditioning * Hill start assist * Sideboards * Lashing eyes * L x W x H: 7.30 x 2.49 x 2.50 * Unladen weight: 6,240 kg * German vehicle Fsdpfx Apswu I E Do Dopn * Good CONDITION WhatsApp: Errors and prior sale excepted!! Sale is made excluding any warranty!! - We speak Russian - We speak English - We speak Polish - We speak Turkish - We speak Spanish

Condition: good (used), Year of construction: 2014, ITW Dynatec Hot Melt Glue Pump Complete with two heated hoses, modules, guns and nozzles Fpsdpfx Aourf T Dsp Dsn 240 Volts 7200 Watts 50 / 60 HZ In good working condition

Condition: used, mileage: 1,39,000 km, power: 175 kW (237.93 HP), first registration: 05/2023, fuel type: diesel, maximum load weight: 5,210 kg, overall weight: 11,990 kg, axle configuration: 4x2, wheelbase: 4,760 mm, color: blue, driver cabin: other, gearing type: other, emission class: euro6, suspension: air, Year of construction: 2022, Equipment: air conditioning, cruise control, differential lock, tail-lift, trailer coupling, This offer is non-binding. Errors and prior sale excepted. If a foreign currency is specified, it will be converted at the current daily exchange rate. The currency of the vehicle's location applies. Engine OM936, R6, 7.7 l, 175 kW (238 hp), 1000 Nm, High Performance Engine Brake, front axle, 5.3 t, rear axle 11 t, differential lock on rear axle, cable remote control for air suspension, air suspension, rear axle, trailer brake, 2-line, wheelbase 4760 mm, ADR type class AT, trailer hitch, trailer hitch, weight variant 11.99 t (4.9/8.1), S cab, S cab, exterior sun visor, transparent, front mirror, heated, main mirror, electric, driver's side, locking system, with central locking, sun visor, side, driver's side, air conditioning, driver's comfort suspension seat, power windows, electric, both sides, rain sensor, lane keeping assist, Active Brake Assist, airbag, driver, cruise control, Truck2Go with Austrian vehicle documents, young curtainsider body with 2000 kg Dhollandia liftgate (new, year 2026), new tarpaulin! Currently being prepared! Fpsdez E Dmmjpfx Ap Den

Condition: new, Year of construction: 2024, neu 2024 5549 prompt, Zwischenverkauf v Taiwan 63870 € 1207.14 € 1 1 Fedpfxswiqyms Ap Dopn 610 mm 610 mm 600 x 300 mm 300 x 600 mm 650 mm 700 mm 5 - 25 m/min 0 - 2,250 mm/min 3 - 32 (0,001) mm 320 mm 5,5 kW kW 0.74 kW 1 kW 1 kW 2950 mm 1490 mm 2080 mm 2200 kg 355 x 50 x 127 mm 1.450 U/min 0,001 mm 10.4" graphic NC control on a swivel arm with touchscreen for: Operating mode selection Cycle selection and program creation Surface grinding Cross grinding Plunge grinding Dressing with automatic compensation Semi-automatic balancing in the machine Automatic spindle speed for constant surface speed Spindle load visualization Unbalance control Graphical status monitoring Alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator automatic dresser over the wheel, with compensation grinding wheel grinding wheel flange grinding wheel balancing stand balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH OPTIONAL EQUIPMENT: additional grinding wheel flange € 200,--

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: E1TAH0029, grinding length: 600 mm, grinding width: 300 mm, grinding wheel diameter: 304 mm, table length: 600 mm, table width: 300 mm, TECHNICAL DETAILS Grinding length max.: 600 mm Grinding width max.: 300 mm Distance from table surface to spindle center: 585 mm Grinding wheel dimensions: 304 x 31.75 x 76.2 mm Table and magnetic plate Table size: 600 x 300 mm Magnetic plate: 600 x 300 mm Axis movements Hydraulic table longitudinal movement: 650 mm Fpedpfx Aezgux Ssp Den Automatic transverse movement: up to 310 mm Machining: fully automatic in 3 axes Spindle and power Grinding spindle power: 3.7 kW Spindle speed, frequency inverter max.: 2,100 rpm Machine bed: 780 x 750 mm MACHINE DETAILS Dimensions and weight Dimensions: approx. 2,700 x 1,600 x 1,850 mm Machine weight: approx. 1,990 kg EQUIPMENT Fully automatic machining in 3 axes Touchscreen control panel with program management Automatic central lubrication Cooling system with automatic paper filter Enclosed splash guard with lighting Electronic handwheel

Condition: ready for operation (used), Rexroth MAC112A-0-VD-2-C/130-A-1 3-phase permanent magnet motor MNR: R911224444 SN:MAC112-A0256 ,used, normal signs of wear, 100% functional, scope of delivery as per photos Fodpfx Aetz Idwop Djpn

Condition: ready for operation (used), Siemens 6AV6642-0DA01-1AX1 OP177B PN/DP T/K-6 CSTN SIMATIC Color Touch Panel, professionally and completely refurbished and tested, with a 6-month warranty, 100% functional. Scope of delivery as shown in the photos. Fpjdpsi Edcpjfx Ap Don

Condition: used, Ex-Linear light fitting with metal housing for surface mountingMake: EATONTyp:AB 12240 E36 pieces availableNew Items Fjdpfsd N Sv Nox Ap Dopn

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 50290 € 950.48 € 610 mm 600 mm 610 x 305 mm 300 x 600 mm 650 mm 700 mm 5 - 25 m/min 1.100 mm/min 1 - 12 mm 370 mm 1.5 kW 0.004 kW 0.19 kW 7,4 kW 2670 mm 1810 mm 2050 mm 2100 kg 355 x 50 x 127 mm 1.450 U/min 3,7 kW 4 mm 0,02 mm 0,2 mm 0,002 mm control panel on swiveling arm Fsdpfx Apjwirh Se Djpn aut. vertical feed hardened slide ways in all 3 axes with needle rollers grinding wheel spindle on 4 high precision angular contact bearings electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator manual extractor with diamond grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 171210 € 3235.87 € 610 mm 590 mm 600 x 300 mm 600 x 300 mm 0 - 25 m/min 0 - 4000 mm/min 0,001 mm 350 mm 450 mm Fsdoy Uba Uopfx Ap Dspn 0 - 3800 mm/min 0.001 mm 600 - 3600 1/min 11 kW 3103 mm 3933 mm 2480 mm 5800 kg 810 mm 314 kg 420 kg 405 x 50 x 127 mm 2,4 / 3,9 kW 3.9 kW 0,005 mm 0,003 mm Rigid machine construction with a movable column for effective stability to ensure high grinding performance and machining accuracy Smart i control with 10.4" touchscreen on a swiveling panel, with electronic wired handwheel, with graphical dialog programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multi-groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 6 angular contact ball bearings (4 front and 2 rear) All 3 axes with precision ball screws and AC servo motors A balancing system is attached to the spindle housing to reduce stress on the machine structure Full enclosure with lighting Electromagnetic chuck Coolant system 200 l/min with drum paper filter and magnetic separator Driven wheel dressing device mounted on the table, 1.5 kW, with double support, width 100 mm, diameter 35 or 52 mm Grinding wheel Grinding wheel flange Grinding wheel balancing scale Heat exchanger for the control cabinet Machine and equipment compliant with CE regulations Operating instructions in GERMAN or ENGLISH Accuracy standard ISO 1986-1 OPTIONS (prices on request): Linear encoders for Y and Z axes Oil mist collector

Condition: ready for operation (used), Rexroth MAC071B-0-TS-3-C / 095-A-1 / S001 permanent magnet motor, part number: R911224309, serial number: MAC071-43580, used, shows significant signs of wear, 100% functional, scope of delivery as shown in the photos. Fpedpfji D Nfmsx Ap Don

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 74030 € 1399.17 € 610 mm 600 mm 600 x 300 mm 600 x 300 mm 420 kg 700 mm 5 - 25 m/min 0 - 2.250 mm/min mm 350 mm 440 mm 0 - 675 mm/min 0.001 - 0.04 mm 500 - 2000 1/min 5,5 kW 0.75 kW 1.1 kW Fodpfx Aswirc Njp Dopn 1.1 kW 2710 mm 2428 mm 2200 mm 3500 kg 975 mm 355 x 50 x 127 mm 10,4" grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator autom. dressing attachment table mounted with compensation * fully enclosed splash guard protection of working area grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH autom. dressing attachment table mounted with compensation *

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 119920 € 2266.49 € 610 mm 600 mm 600 x 300 mm 600 x 300 mm 0 - 20 m/min 0 - 3000 mm/min 0,001 mm 350 mm 440 mm 0 - 3000 mm/min 0.001 mm 500 - 1800 1/min 11 kW 3160 mm 2450 mm 2080 mm 3400 x 2200 x 2530 mm 4000 kg 975 mm 195 kg 370 kg 355 x 50 x 127 mm 1,1 / 1,1 kW 3.9 kW 0,005 mm 0,003 mm Smart i control with 10.4" touchscreen on a swiveling panel, with electronic wired handwheel, with graphical dialog programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, class 7) Longitudinal and cross guides with heavy duty needle roller bearing for low friction, better accuracy and lower maintenance costs All 3 axix with precision ball screws (class C2) and AC servo motors Fully enclosed splash guard with lamp Electromagnetic chuck plate Coolant system 120 lt with automatic paper filter and magnetic separator Automatic diamond roller dresser mounted on the table, with automatic compensation * Grinding wheel Grinding wheel flange Grinding wheel balancing scale Machine and equipment in accordance with CE regulations Operating manual in GERMAN or ENGLISH Accuracy standard ISO 1986-1 * The exact configuration of the dresser must be clarified before ordering Fpsdpfxowirb Ss Ap Don

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 109520 € 2069.93 € 610 mm 600 mm 600 x 300 mm Fpjdpfjwiq H Tex Ap Den 600 x 300 mm 5 - 25 m/min 0 - 3000 mm/min 0,001 mm 350 mm 440 mm 0 - 3000 mm/min 0.001 mm 500 - 1800 1/min 11 kW 2.2 kW 4020 mm 2450 mm 2080 mm 3400 x 2220 x 2530 mm 3700 kg 975 mm 195 kg 370 kg 355 x 50 x 127 mm 1,1 / 1,1 kW 0,005 mm 0,005 mm Smart i control with 10.4" touchscreen on a swiveling panel, with electronic wired handwheel, with graphical dialog programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, class 7) Longitudinal and cross guides with heavy duty needle roller bearing for low friction, better accuracy and lower maintenance costs Transverse and vertical feed with precision ball screws (class C2) and AC servo motors Longitudinal feed hydraulically Fully enclosed splash guard with lamp Electromagnetic chuck plate Coolant system 120 lt with automatic paper filter and magnetic separator Automatic diamond roller dresser mounted on the table, with automatic compensation * Grinding wheel Grinding wheel flange Grinding wheel balancing scale Machine and equipment in accordance with CE regulations Operating manual in GERMAN or ENGLISH Accuracy standard ISO 1986-1 * The exact configuration of the dresser must be clarified before ordering

Condition: new, Year of construction: 2026, Powered Load Moving Skates with a compact design, low overall height and load capacities of 10, 24, 40, 48 and 80 tonnes. Intelligent Single-Joystick control for all movements. Available in as version with a hydraulic lifting cylinder (+H) or as a DUO or DUO H, with synchronised control of two skate systems. This enables loads to be manoeuvred in a crab steering or round tight bends. The POWER-Skate is the modern way to effectively synchronise or move machinery and equipment in production. Please send us your enquiry. Fsdpegi Dm Hofx Ap Djpn

Condition: good (used), Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering, electric hand pallet truck -Manufacturer: Linde, drawbar complete with drive from electric hand pallet truck -Drive motor: Type T 12 24 V -Sale/Price: complete -Dimensions: 1200/440/H290 mm Fsdpfxei Aqaue Ap Depn -Weight: 46 kg

Condition: new, Allen Bradley CAT. No. 1778-OHC DC power output module, 12-24V, unused, in sealed original packaging, 100% functional. Fsdpfxei D Tzto Ap Dopn