Used Termotek Laser Cooling for sale (9,973)

Condition: good (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2020130, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cypcut, laser type: fiber laser, laser source manufacturer: IPG, laser power: 2,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,050 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 150 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, cutting speed: 13,000 mm/min, positioning speed: 80 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, power: 26.5 kW (36.03 HP), input voltage: 400 V, input frequency: 50 Hz, overall weight: 5,000 kg, Equipment: documentation/manual, dust extraction, fume extraction, CYPCUT - CYPTUBE, auto-center positioning, pneumatic clamping, automatic alignment device, automatic clamping device, cutting head incl. protective glass, Raytool / SWISS, laser source - IPG / Germany, software for 3D tube and profile cutting, automatic loading system for tubes and profiles, extraction unit Filtercube 2H, 4 kW, 50 m² Hsdjy Efbkspfx Ab Ijnt

Condition: used, Universal temperature control unit WEINREICH, Type WTD 4 Temperature control unit with electric heating and connections for external cooling Manufacturer's serial number: 11932217, Year of manufacture: 1993 Temperature: max. 140°C Operating overpressure: max. 6 bar Pump capacity: 30 l/min Tank volume: 4 liters Heating capacity: 4 kW Cooling capacity (heat exchanger): 15 kW Pump motor power: 0.37 kW Circulating water, supply + return: G 3/8" Cooling water, supply + return: G 3/8" Total power: 4.4 kW Mains connection: 380 volts, 50 Hz, CEE plug - Temperature control medium: water - Temperature control with actual and setpoint display: STÖRK-TRONIC, Type ST 96-35.02K - Water circulation pump: SPECK - An external cooling unit is required for cooling (the cooled water is fed to the temperature control unit) Hnjdpfsg Rhx Uex Ab Iot - Movable on 4 rollers Dimensions L x W x H: 620 x 260 x 670 mm Weight: 55 kg Good condition

Condition: refurbished (used), Condition: refurbished, since then unused and professionally stored in case of the manufacturer Wavelengths: 900 ... 1030 nm; 1064 nm, 1080 nm up to 4 kW mappings: 2.0:1 - 2.5:1 - 3.2:1 - 4.0:1 - 5.3:1 Fiber connector: Trumpf B or type D (LLK Auto) Laser: CW laser up to 4 kW Hnjdpjg Sfdlefx Ab Iot working range height (Z): ± 5 mm Robot adaptation: any Repaired/exchanged - Lens - pressure spring - protection spring - cover - Beam diaphragm - Wave spring - Fiber coupling weft The unit was also cleaned, adjusted and force-normalized.

Condition: new, Year of construction: 2022, Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 0-40000mm/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cutting Thickness: 0-30mm CNC or Not: Yes Cooling Mode: WATER COOLING Control Software: Bodor Pro Hnodpfjgyw Sdox Ab Ist Place of Origin: China Brand Name: Bodor Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Laser Head Brand: bodorgenius Control System Brand: bodorpro Weight (KG): 2200 KG Key Selling Points: Tenon-and-mortise type plate welding structure bed Warranty: 3 years Laser power: 1000W Power supply: 110V/220V/380V 50Hz/60Hz

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 45 kg, total length: 600 mm, total width: 400 mm, total height: 690 mm, input voltage: 230 V, input frequency: 50 Hz, laser power: 20 W, laser wavelength: 1,064 nm, scan area length: 110 mm, scan area width: 110 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis Hjdpfx Aboy Emtho Isnt - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: used, Scan Head: Cambridge Technology ProSeries I Scan Head, 10mm, Serial Number 15241322. Hjdpfxezwgais Ab Ijnt

Condition: used, Manufacturer: CFS Model: BR6000/600 Year: 2001 Condition: Used Serial Number: 1402 Stock Number: 3426B Belt width: 600 mm Belt: Eyelink belt for extra small products Frying length: 6000 mm Heating: Thermal oil Power: 3 x 400V, 50Hz, 8.6kW Dimensions: 8700 x 2200 x 3800 mm Weight: 4250 kg CFS oil filter Type: OMR120 Serial number: 60 Year of construction: 2005 Dimensions: 2750 x 1100 x 1700 mm Power: 3 x 380V, 50Hz, 4.5kW Weight: 525 kg Including pallet filterpaper NN ambient cooling conveyor Belt width: 950 mm Belt length: 6000 mm Belt: eye link belt of 3 mm Compressed air: 6 Bar Power: 3 x 380V, 50Hz, 2.7kW Hnjdpfxszw Dzwj Ab Iet Dimensions: 7600 x 1700 x 2000 mm Variable speed control Wanson Themopac thermic boiler Type: 200B Serial number: 9335.56445 Year of construction: 1986 Heating: natural gas Heating power: 233 kW Power: 3 x 380V, 50Hz, 7.5kW Dimensions: 3000 x 2450 x 2600 mm Installation built into 10ft container

Condition: good (used), functionality: fully functional, Year of construction: 2016, laser power: 3,000 W, TruLaser Tube 5000 fiber (T06) X Working area max.: 6500 mm Y Working area max.: 200 mm Laser power: 3000 Watts Control system: SINUMERIK 840D SL Standard equipment Machine - Machine table for automatic loading up to 6.5 m - Max. outer diameter of the circle: Round tube up to 152 mm, Rectangular tube up to 170 mm - LoadMaster tube 6.5 m with grouping chamber - Part removal station for 3 m finished part length (incl. scrap conveyor with container) - Part stacking station (with conveyor table and conveyor table extension) - NitroLine - FocusLine - Laser power control - Programmable cutting gas - Automatic start/stop system - Work area lighting Laser - Solid-state laser TruDisk 3001 with one laser output - Maintenance log function - Laser chiller Cutting unit - Lens cutting head with 150 mm focal length - ControlLine Control system - Sinumerik 840DSL - Remote maintenance interface Hjdpfxozv Tnwe Ab Isnt Data transfer - USB interface - RJ45 network interface Safety - CE certification - Light barriers - Compact dust extraction system (1500 Nm*/h) - Protective housing with certified safety panes Service - Network installation via teleservice Additional machine equipment - SeamLine Tube with inner detection - Adaptive clamping technology - Adaptive clamping feeding station - Adjustable feed chuck - Chip conveyor, longitudinal - Technology package for bevel cutting Automatic LoadMaster Tube 6.5 m - LoadMaster Tube 6.5 m at the rear - LoadMaster Tube 6.5 m tube diameter 15 mm - Unloading station 4.5 m - 1 set of clamping jaws - 1 set of guide rollers - Various support sets for round and rectangular tubes

Condition: new, Year of construction: 2026, table length 3000 mm table width 1500 mm burner heads 1 Control CNC workpiece weight 900 kg traversing speed 91 m/min dimensions of the machine ca. 5562 x 2270 x 2388 mm Configuration 1. BodorPower laser source 6 kW 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Bed made of tenon and mortise structure 5. Bodor servo motor and driver 6. Nitrogen control valve 7. Bodor Lightning perforation technology 8. Automatic layout of residual material 9. 21.5-inch monitor with touch function 10. Automatic adjustment of cutting gas pressure 11. Active anti-collision function 12. Intelligent vibration protection 13. Anti-burn mineral casting 14. Bodor Mango® Ergonomic Remote Control 15. Gas-saving nozzles with stable flow 16. Intelligent maintenance reminder 17. WIFI internet connection 18. Water cooling 19. Extraction system 20. Wear parts set CUTTING CAPACITY: STRUCTURAL STEEL 20 mm STAINLESS STEEL 18 mm Hnjdpfowh Ulqox Ab Ijt ALUMINUM 14 mm OPTIONAL: LANTEK EXPERT II CUT software incl. post-processor

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, warranty duration: 1 months, positioning accuracy: 5 mm, Equipment: documentation/manual, The official FARO distributor is selling a demo unit – the FARO Orbis Premium mobile scanner. The package includes: Hjdszzdpvopfx Ab Iont - FARO Orbis Premium mobile 3D laser scanner - Datalogger portable control unit - 2 batteries - Battery charging station - Connection cable - Monopod tripod - Phone mount - FARO calibration certificate - Durable original case The unit is from 2025, comes with a calibration certificate, and has a valid warranty. It has been lightly used – for customer demonstrations and at trade shows. The mobile scanner is in excellent condition. It provides 3D laser scanning with 5mm accuracy, allowing for very fast scanning of large areas, buildings, and rooms. The stationary Flash mode allows scanning with 2mm accuracy. Technical specifications: - Accuracy: 5mm (2mm in Flash mode) - Scanning distance: 120m - LIDAR channels: 32 - Camera: 72MP - Operating time with 1 battery: 3-4 hours The unit is located in Riga, Latvia, and can be viewed in person or remotely.

Condition: new, Year of construction: 2026, laser power: 6,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, New fiber lasers from the HLB series - optimized equipment with an eye on the essentials - low acquisition costs Max Photonics resonator, Raytools auto focus cutting head guarantee high-quality, competitive laser cutting with minimal maintenance costs FURNISHING: Cutting head: Raytools - Auto Focus Resonator 6KW Automatic changing table including light barriers Suction: Welldone CE certified Cypcut control with touchscreen including online programming directly on the control Sheet format 3,000mm x 1500mm Connection value max. 30kW Hsdpfezyaf Rex Ab Iont Installation area approx. 9,000mm x 3,000mm x 2,200mm The machine is included 12 month guarantee Installation Delivery within Germany and Software/operator training offered Optional: Offline programming CAD CAM software Libellula [CUT] Connect gases, electricity, done. In our exhibition we have various laser machines from our manufacturers under power and various materials for testing. We would be happy to invite you to come and cut your drawings or material. We, the company H+S, have been an exclusive trading company and service provider for YAWEI machines for 20 years, of which we have been selling their fiber lasers for around 15 years. We have already installed more than 300 fiber lasers from YAWEI. Come and see for yourself in your area. Call us and visit us!

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Numerically adjustable infeed fence Air flotation infeed table Anti-adhesive liquid spray system Pre-milling unit with diamond cutters Hnedpozx Sxgjfx Ab Iot Edge feeder for edge banding from coil or strips Glue station for GlueJet cartridges or L-Tronic laser technology 4 pressure rollers with pneumatic pressure adjustment Edge lubricant spray system Dual-motor precision end trimming unit with pneumatic angle adjustment Top and bottom edge surplus trimming unit (straight trimming) Numerically adjustable profile edge milling unit Flat scraper Profile scraper – two profiles Cleaning liquid spray system Pneumatically activated buffing units Pneumatically activated edge buffing unit Feed speed continuously adjustable from 10 to 25 m/min Automatic lubrication of the feed chain Frame support Minimum workpiece length: 140 mm Workpiece thickness: 8–60 mm Minimum workpiece width: 60 mm Year of manufacture: 2016

Condition: good (used), functionality: fully functional, Year of construction: 2019, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,524 mm, travel distance Z-axis: 350 mm, total length: 9,450 mm, total width: 2,240 mm, total height: 2,520 mm, For sale is a used Bodor P3 fiber laser cutting machine, manufactured in 2019. The machine is in good used condition and is ideal for professional use in metal and sheet metal processing. Bodor P3 Fiber Laser Cutting Machine – Manufactured in 2019 – Used Bodor P3 3D? / Fiber Laser Cutting System – Manufactured in 2019 Technical data: * Model: Bodor P3 * Year of manufacture: 2019 * Working area: 3,048 × 1,524 mm * Max. travel speed: 200 m/min * Max. acceleration: 4.0 G * Z-axis travel: 350 mm * Positioning accuracy: ±0.05 mm/m * Accuracy of repositioning: ±0.02 mm * Dimensions: approx. 9,450 × 2,240 × 2,520 mm * Table loading station: 3–60 kW, depending on the model The Bodor P3 impresses with its high cutting speed, precise positioning, and generous working area. An interesting machine for sheet metal processing, metalworking, contract manufacturing, and industrial production. Used machine – inspection possible by appointment. Transport, disassembly, and loading can be arranged upon request. Upon request, transport and loading can be organized throughout Europe for an additional fee. Prices exclude VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying/selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? Hodpfx Abjzylxvo Ient For further information or contact options, please visit our website.

Condition: good (used), Year of construction: 2003, functionality: fully functional, inner dimension width: 1,300 mm, total length: 6,000 mm, total width: 1,900 mm, Used for cooling after painting/coating processes where the paint/coating has been heated during drying. Hnedpfozbau Nox Ab Iet

Year of construction: 2024, operating hours: 2 h, condition: new, functionality: fully functional, For sale is an as-new spiral cooling tower made of stainless steel 304. As a precautionary measure, the basket was completely shot-blasted, and every single stainless steel component was pickled and then hand-polished. All screws and nuts have been replaced with new ones, all shafts have been replaced with stainless steel, and all ball bearings have also been replaced with stainless steel deep groove ball bearings. Replacement motors (drive for the basket and for the modular belt), as well as approximately 20 meters of modular belt, are included as spares. Total modular belt width: approx. 340 mm, blue area width approx. 280 mm, outer side areas on the right and left made of stainless steel. Total belt length: 100 m. Number of tiers: 9. Spacing between each tier: 105 mm. Overall tower height: 2060 mm. Overall length incl. discharge belt: approx. 4000 mm; discharge section: approx. 2000 mm; total width: 2235 mm; running surface inner width: 370 mm; running surface outer width: 465 mm. Modular belt is made of stainless steel and POM. This spiral cooling tower also comes with a Z-belt. The Z-belt shown is for reference only and is not the original. Hnsdeyvrvpepfx Ab Iet

Condition: good (used), Year of construction: 2013, 1 laser system with 1 loading station, 2 nests each - Up to 4 welding fixtures - Laser power: 3.3 kW - Beam source: Trumpf Trudisk 3302 disk laser - System manufacturer: Sitec - Operating hours: approx. 70,000 h - Max. workpiece dimensions: approx. 300 x 100 x 100 mm - Larger workpieces possible - Beam guidance via laser light cable (LLK) - Laser welding with Trumpf BEO D 70 welding optics on one axis system. - Inline laser monitoring system for weld seam monitoring - Welding speeds: up to 5600 mm/min - Welding penetration depth: 1.5 mm - Welding with shielding gas possible! For aluminum or stainless steel - Fixtures can be water-cooled! - 2 rotary axes per table side, individually programmable PROGRAMMING: 4 cylinder clamping circuits per tool 10 inputs via slip ring rotary distributor 8 additional inputs per tool via radio system Inputs freely configurable via user interface (end position / part control / setup control) Clamping and release programs and part queries fully programmable via NC program No PLC programming required System fully programmable via Siemens control (G-code) Laser programmed via Trumpf TruControl and called via Siemens control (G-code). Output Guidelines T 1: 2 weld seams (each 100 mm in diameter, weld penetration depth = 1.5 mm) 2 components per side of the table approx. 250 parts per hour Hjdpswm I H Sofx Ab Isnt T 2: 17 weld seams (each 10 mm in diameter, weld penetration depth = 1.2 mm) 2 components per side of the table approx. 190 parts per hour The system can be viewed live!

Condition: used, functionality: fully functional, Year of construction: 2002, laser type: CO₂ laser, laser source manufacturer: Coherent ROFIN, laser source model: DC030 SLAB, laser hours: 4,800 h, laser power: 3,000 W, Equipment: CE marking, Laser generator Coherent ROFIN DC030 SLAB Laser Compact Year of manufacture: 2002 LasCon control system The laser is in very good technical condition and fully functional. It can be offered as a COMPACT version or as a Split/Standard version. Hnjdpfszzxyvox Ab Ist A complete overhaul and major maintenance can be offered as an option. The technical specifications and operating parameters of the laser comply with regulations and demonstrate the full output power, with corresponding power reserve. This source can be used, among other things, for "Die Board" systems (die manufacturing) with a rotary axis. A price quote can only be provided after all technical details have been clarified. High-voltage operating hours: approx. 25,400 hours Tube operating hours: approx. 4,800 hours

Condition: used, mileage: 85,329 km, power: 294 kW (399.73 HP), fuel type: diesel, gearing type: automatic, first registration: 01/2020, next inspection (TÜV): 01/2027, emission class: euro6, color: black, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, * German vehicle, first owner, complete service history Hnjdpozpgnkofx Ab Ist * Air suspension * Swiveling tow hitch, 3,500 kg towing capacity * Heated seats, front and rear * Panoramic sunroof * Laser headlights, head-up display * Auxiliary heating * Surround view camera * Full Merino leather interior in Coffee color * LED daytime running lights * 8 tires, 22-inch summer and winter tires * I would be happy to send you the technical specifications and a video via WhatsApp * WhatsApp: * Polish contact: * Sold on behalf of a customer, all information without guarantee, subject to prior sale. Special equipment: BMW Display Key, aluminum roof rails (satin finish), entertainment package, DAB tuner (digital radio reception), Harman-Kardon sound system, inductive charging cradle for smartphone (wireless charging), exclusive package, metallic paint, panoramic roof (glass), interior trim: glass applications (CraftedClarity) for controls, ambient air package, exterior trim: aluminum (satin finish) BMW Individual, cup holders with cooling/heating function, interior trim: fine wood trim, innovation package, laser headlights, head-up display, leather-covered dashboard, 4-zone automatic climate control with automatic recirculation control, electrically adjustable comfort seats (with memory), light alloy wheels front/rear: 9.5x22 / 10.5x22 (V-spoke 747 M, bicolor, cerium gray), Sky Lounge panoramic roof (glass, LED lighting), parking assistant package Plus, sun protection glazing (rear tinted), universal garage door opener, acoustic glass, comfort package (front), heated front seats, heated steering wheel, auxiliary heating, cup holders Additional equipment: 3rd brake light LED, adaptive M suspension, airbags driver/passenger, ambient lighting, exhaust system (left/right) with chrome trim, equipment package: Connected Professional, equipment package: Connected Teaser, service system: Apple CarPlay information (preparation), service system: Remote Services, service system: Concierge Services, service system: Real Time Traffic Information (RTTI), exterior trim: Shadow-Line high-gloss, exterior mirrors electrically foldable, all mirrors with automatic anti-dazzle function, exterior mirrors electrically adjustable and heated, BMW Live Cockpit Professional, hands-free system Bluetooth, audio navigation system Professional, brake system: M Sport brakes (brake calipers painted), headliner anthracite (BMW Individual), wheel theft protection (wheel locks), dynamic brake lights, door sill trims with M-Technic lettering, driving assistance system: BMW gesture control, driving assistance system: driving experience switch, driving assistance system: reversing assistant, pedestrian protection system (passive), floor mats velour, luggage compartment separation net, speed limiter, tailgate two-piece, tail lights LED, interior filter: activated carbon filter (odor filter), Isofix attachments for child seat, body: 5-door, head airbag system rear, head airbag system front, rear headrests, multifunction steering wheel, steering column (steering wheel) electrically adjustable, reading lights rear, reading lights front, automatic headlight range control, center armrest rear, engine 3.0 L - 294 kW turbo diesel, non-smoker package, NOx storage catalyst (BMW Blue Performance), park distance control (PDC) front and rear, parking assistant package, driving assistance system: parking assistant, parking brake electric, personalization system (Personal Profile), wheel

Condition: used, Machine: Cooling unit Hedpfx Abez Ar Upe Ient

Condition: new, functionality: fully functional, Year of construction: 2025, BODOR Laser Cutting Machine Model: P3015-12000W with 12 kW BODOR Laser Source Equipped with a shuttle table, programmable via CNC control system Configuration: - 12 kW BODOR Laser Source - Bodor Genius Laser Cutting Head - Bodor Thinker Control System - 21.5-inch monitor with touch function - Insert and dovetail plate welded segment bed - Bodor servo motor and driver - SMC oxygen regulating valve from Japan - Parker nitrogen regulating valve from America - Automatic nozzle changer (8 stations), nozzle cleaning, and calibration automatic - One-click processing - Bodor Lightning Perforation Technology - Automatic adjustment of cutting gas pressure (O2) - Protection when the door is open - Alarm function for cutting errors - Autofocus of the laser head - Expert database for laser cutting technology - Ergonomic remote control (Bodor Mango®) - Active anti-collision function - Intelligent maintenance reminder - WIFI internet connection - Bodor Cloud service - Water chiller - Stabilizing transformer - CE conformity Technical Data: Length with panel: 9,950 mm Width: 3,050 mm Height: 2,300 mm Weight: 8,300 kg Working area: 3,048 x 1,524 mm Max. workpiece weight: 1,450 kg Shortest pallet change time: 10 sec. Max. simultaneous speed: 200 m/min. Positioning accuracy: 0.03 mm Repositioning accuracy: 0.02 mm Screen size: 21.5 inches Number of shuttle tables: 2 Max. sheet thickness carbon steel: 35 mm Max. sheet thickness stainless steel: 30 mm Max. sheet thickness aluminum: 25 mm Max. sheet thickness brass: 16 mm Max. laser power: 12 kW Laser source type: Bodor Laser head: Bodor Genius Software: Bodor Thinker Including the following special accessories: Hnjdpfx Abozd Eqgj Ist - Extraction system (The connection/piping of the extraction system to the machine must be carried out by the customer) - Wear part set - Installation package - Including fully automatic loading and unloading module, Model: iTrans 3 Technical Data: Max. material size: 3,000 x 1,500 mm Min. material size: 1,000 x 1,000 mm Max. material thickness: 25 mm Min. material thickness: 1 mm Max. loading weight: 900 kg Max. loading weight for finished products in the trolley: 3,000 kg Dimensions loading module (L x W x H): 10,000 x 8,500 x 2,600 mm Weight loading module: 4,800 kg Errors and prior sale are reserved!

Condition: used, functionality: fully functional, Year of construction: 2017, Used profile laser by Durma Type: HD TC 60170 IPG 2 kW Infeed and outfeed system Length: 6 meters Max diameter: 170 mm Year of manufacture: 2017 Hedjyykf Depfx Ab Ijnt IPG 2 kW source Precitec cutting head

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, operating hours: 36,000 h, laser source manufacturer: TRUMPF, laser power: 4 W, overall weight: 13,140 kg, total length: 9,300 mm, total width: 4,600 mm, Manufacturer: TRUMPF Type: TRUMATIC L 3030 Year of manufacture: 2008 Table dimensions: 3000 x 1500 x 115 mm Power: 4000 Watts Control system: Siemens Sinumerik 840 D Max. thickness of sheet metal that can be cut / steel: 20 mm Max. thickness of sheet metal that can be cut / stainless steel: 15 mm Max. thickness of sheet metal that can be cut / aluminum: 10 mm Max. cutting speed: 60/85 m/min Accuracy: +/- 0.1 mm Length: 9,300 mm Width: 4,600 mm Height: 2,000 mm Weight: 13,140 kg Hodpfx Abszy Huxs Iont

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruFiber 6001 G, laser hours: 1 h, laser power: 6,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 20 mm, working length: 3,000 mm, working width: 1,500 mm, workpiece weight (max.): 8,000 kg, input voltage: 400 V, input current: 125 A, type of input current: three-phase, type of cooling: water, compressed air connection: 14 bar, overall weight: 8,000 kg, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, JFY BFC+ 6 kW Fiber Laser with TRUMPF laser source – a new sheet metal cutting machine We offer a state-of-the-art JFY BFC+ 6 kW fiber laser equipped with a high-quality TRUMPF laser source. The machine is designed for precise, fast, and efficient sheet metal cutting in manufacturing and service facilities. The JFY BFC+ 6 kW is an excellent solution for companies involved in sheet metal processing, steel structure manufacturing, machine component production, enclosure manufacturing, industrial component production, and ventilation component production. The 6 kW power provides high cutting performance and a wide range of processing capabilities for various materials. The machine combines the robust JFY construction, stable cutting process, and TRUMPF laser technology. By using a TRUMPF source, the user receives high beam quality, excellent process repeatability, and reliability in daily production. Key advantages of the machine: * Laser source power: 6 kW, * TRUMPF laser source, * Fiber laser technology, * High cutting speed, * Stable edge quality, * Precise cutting head with autofocus, * Robust machine construction, * Intuitive operation, * Quick production setup, * Ability to cut various materials, * High part repeatability, * Excellent value for money, * Technical and service support in Poland. Applications: * Cutting of carbon steel, * Cutting of stainless steel, * Cutting of aluminum, * Cutting of structural elements, * Production of enclosures and machine components, * Production of ventilation components, * Serial and single-piece production, Hsdozhab Iepfx Ab Isnt * Laser cutting services. Commercial information: The machine is available from ANFAN Sp. z o.o. – the official representative of JFY International in Poland. We can prepare an individual machine configuration based on customer needs, worktable size, loading and unloading system, and additional equipment. Please contact us for a detailed offer, technical specifications, and delivery terms.

Condition: excellent (used), power: 55 kW (74.78 HP), color: other, Year of construction: 2024, operating hours: 1,192 h, Equipment: air conditioning, Empty weight: 4.898 kg Chassis type: rigid Steering: skid steer Make of engine: Bobcat Quick coupler system: Yes CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - Beacon(s) - Blower - High Flow - Hydraulic quick coupler - Radio Bluetooth - Rubber tracks - Two Speed - Work lamp(s) = Remarks = Drivetrain Hnedpfjyl Iulox Ab Iot Stage / Tier: Stage V / Tier IV final General Country of production: USA Condition CE type: CE Used Bobcat T76 with NEW HD Grader 96 / 244 cm with Laser guidance system, Bobcat equipped with the following options: Hydraulic quick coupler, Two speed, large display, Air-suspended seat, Air conditioning Rear view camera, Highflow The grader is NEW and equipped with masts and two Bobcat LR410 laser receivers. Other attachments are available upon request.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 31,621 h, machine/vehicle number: A0221E1033, table length: 3,000 mm, table width: 1,500 mm, Power: 3000 W Hnjdpfx Abezzyl He Ijt Work area size: 3000x1500 mm Further details can be found in the images, and it comes with a commissioning guarantee.