Used Rx 70-45 Frontstapler for sale (21,120)

Condition: ready for operation (used), Röhm RPP-125-1 / GA parallel gripper, LA82x45, ID 170022, serial number X5017, used, shows normal signs of wear, 100% functional, scope of supply as shown in the photos. Fsdoi Ec Dxspfx Adrjpk

Condition: new, empty load weight: 3,740 kg, maximum load weight: 10,660 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,420 mm, suspension: steel, tire size: 385/55 R 19,5, color: other, gearing type: other, front tire size: 385/55 R 19,5, rear tire size: 385/55 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-sided tipper, loading area length approx. 5,700 mm, sideboards 600 mm high, galvanized, loading height approx. 990 mm, 4 x tie-down points in the floor, each rated at 5 tons, 8 x tie-down points in the floor, each rated at 3 tons, reinforced gearbox support winch with load and fast gear at the front, wide tires: 385/55 R 19.5, chassis: hot-dip galvanized. Additional cost for: aluminum ramps (approx. 3,520 x 400 mm) with a load capacity of 10 tons per pair and 2 folding supports at the rear, price: 1,900 euros. Fsdpfx Aszr Sfmodropk Printing errors, errors and changes excepted, sample images. More details: !

Condition: new, empty load weight: 3,740 kg, maximum load weight: 10,660 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,420 mm, suspension: steel, tire size: 385/55 R 19,5, color: other, gearing type: other, front tire size: 385/55 R 19,5, rear tire size: 385/55 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-sided tipper, loading area length approx. 5,700 mm, sideboards 600 mm high, galvanized, loading height approx. 990 mm, 4 x tie-down points in the floor, each rated at 5 tons, 8 x tie-down points in the floor, each rated at 3 tons, reinforced gearbox support winch with load and fast gear at the front, wide tires: 385/55 R 19.5, chassis: hot-dip galvanized. Additional cost for: aluminum ramps (approx. 3,520 x 400 mm) with a load capacity of 10 tons per pair and 2 folding supports at the rear, price: 1,900 euros. Printing errors, errors and changes excepted, sample images. More details: ! Fpjdpfjzr Sfgjx Adrsk

Condition: new, empty load weight: 3,960 kg, maximum load weight: 10,440 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,420 mm, suspension: steel, tire size: 385/55 R 19,5, color: other, gearing type: other, front tire size: 385/55 R 19,5, rear tire size: 385/55 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-sided tipper, loading area length approx. 5,700 mm, side walls 600 mm high, galvanized, + grid extension 1,000 mm high, loading height when loaded approx. 990 mm, 4 x tie-down points in the floor, each with a capacity of 5 tons, 8 x tie-down points in the floor, each with a capacity of 3 tons, reinforced gearbox support winch with load and fast-running gear at the front, wide tires: 385/55 R 19.5, chassis: hot-dip galvanized. Fjdpfx Adozr Scforjpk Additional cost for: aluminum ramps (approx. 3,520 x 400 mm), load-bearing capacity per pair 10 tons, and 2 folding supports at the rear. Price: 1,900 Euro. Printing errors, mistakes, and changes reserved. Sample images. More details at: !

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 235 h, load capacity: 230 kg, mast type: telescopic, lifting height: 15,700 mm, lifting power: 230 kg/m, platform length: 760 mm, platform width: 1,550 mm, overall weight: 7,112 kg, empty load weight: 6,882 kg, transport length: 6,500 mm, transport width: 1,700 mm, transport height: 1,980 mm, construction height: 1,980 mm, fuel type: hybrid, fuel tank capacity: 50 l, tire size: 240X55 D17,5, tire condition: 100 %, drive condition: 100 %, wheelbase: 2,050 mm, ground clearance: 160 mm, color: orange, 🚀 JLG M450AJ HYBRID | 2017 | 235 Hours | Articulating Boom Lift 🔹 JLG M450AJ Hybrid articulating boom lift for sale, in excellent technical and cosmetic condition. This 2017 machine has exceptionally low operating hours, only 235 hours from new. Following a comprehensive technical inspection, it is fully operational and ready for immediate use without any additional investment. 📋 Technical Specifications 🏭 Manufacturer: JLG 🔧 Model: M450AJ Hybrid 📅 Year of Manufacture: 2017 ⏱️ Operating Hours: 235 hours ⚡ Drive Type: Hybrid (Electric + Diesel) 📏 Working Height: 15.72 m 📐 Platform Height: 13.72 m ↔️ Horizontal Reach: Up to 7.89 m 🏋️ Platform Capacity: 230 kg 🚜 Type: Self-Propelled Articulating Boom Lift ✅ Features and Benefits ✔️ Hybrid drive system – ideal for both indoor and outdoor applications ✔️ Quiet and emission-free operation in electric mode ✔️ Excellent horizontal reach thanks to the articulating boom design ✔️ Proportional controls for precise and smooth operation ✔️ Non-marking tires ✔️ Compact transport dimensions ✔️ Ideal for installation, maintenance, servicing, and construction work 🏭 This machine is perfectly suited for warehouses, logistics centers, industrial facilities, production plants, commercial buildings, and construction sites. ⭐ With only 235 operating hours from new, the machine shows minimal wear and remains in outstanding condition. It is one of the lowest-hour JLG M450AJ Hybrid units currently available on the used equipment market. 🤝 Why Choose FT Logistics? FT Logistics specializes in the sale of forklifts, sideloaders, multidirectional forklifts, warehouse equipment, and material handling machinery. We provide carefully selected equipment, professional technical support, and expert advice to help customers choose the right machine for their specific requirements. 📦 Our inventory includes a wide range of equipment from leading manufacturers, available for immediate delivery. 🌍 Our Services 🚛 Transport arrangements throughout Europe 📄 Assistance with export procedures and documentation 🔧 Technical support 💻 Online machine presentations 📸 Additional photos and videos available upon request 📞 Please contact us for further information, pricing details, or a tailored offer. We offer a wide selection of forklifts, sideloaders, multidirectional forklifts, and warehouse equipment to suit a variety of industries and applications. 🏢 FT LOGISTICS Quality You Can Rely On. Service You Can Trust. Fpedpfsztkncox Adrjk

Condition: excellent (used), For sale: SEW-EURODRIVE WA20/T DT71D6/BMG/TH geared motor with a built-in 24 V DC electromagnetic brake. The unit is fully functional, tested, and ready for use. The technical condition is very good. The housing has normal signs of use in the form of minor scratches and abrasions, which do not affect the operation of the device. Technical data: Manufacturer: SEW-EURODRIVE Gearbox model: WA20/T Motor type: DT71D6/BMG/TH Power: 0.25 kW Supply: 3×230/400 V Δ/Y Frequency: 50 Hz Rated current: 1.48 / 0.85 A Motor speed: 880 rpm Output speed: 45 rpm Fpjdjzn Npzepfx Adrok Torque: 37 Nm Gear ratio: i = 19.50 Protection class: IP54 Insulation class: F Brake: 24 V DC Braking torque: 5 Nm Weight: 11.66 kg

Condition: like new (used), For sale: STILL RX70 - 35T | 3.5T - Lifting capacity: 3,500 kg - Year of manufacture: 2011 - Drive: LPG - Own weight: 4,846 kg - Mast: duplex - Side shift - Operating hours: 6,585 - Engine: Reliable 36 kW unit. The forklift is fully operational, well maintained, and ready for immediate warehouse or yard use. The efficient Still hybrid drive system delivers the lowest gas consumption in this lifting capacity class. The machine can be tested under load on site. Please contact me for more information or to arrange a test drive. Solid machine at an honest price. Fsdpfx Adsy Nad Isrspk

Condition: new, Year of construction: 2026, functionality: fully functional, feed length X-axis: 580 mm, feed length Y-axis: 200 mm, feed length Z-axis: 130 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 130 mm, spindle speed (max.): 3,200 rpm, spindle speed (min.): 100 rpm, spindle mount: MK 4, throat depth: 286 mm, quill diameter: 130 mm, quill travel distance: 130 mm, type of input current: three-phase, total length: 860 mm, total height: 1,200 mm, table width: 240 mm, input voltage: 400 V, total width: 740 mm, table length: 800 mm, drilling capacity: 45 mm, position of the milling head: ±90°, drilling depth: 130 mm, workpiece weight (max.): 375 kg, distance table to spindle center: 450 mm, Equipment: documentation/manual, rotational speed infinitely variable, Drilling and Milling Machine ZX7045B VARIO (with automatic spindle feed) – professional metalworking machine The ZX7045B VARIO drilling and milling machine is a solid and versatile machine designed for professional metalworking in workshops, production plants and tool rooms. The machine allows drilling, milling and tapping operations, making it a universal solution for many machining applications. The machine is equipped with a powerful 2.2 kW motor and infinitely variable spindle speed control in the range of 100–3200 rpm. The spindle is mounted on precision bearings ensuring high machining accuracy, while the gear transmission operating in an oil bath guarantees durability and quiet operation. The head can be adjusted in height and tilted ±45°, allowing machining at various angles. The automatic spindle feed and automatic spindle reverse during tapping significantly improve operator convenience. A large worktable measuring 800 × 240 mm with T-slots allows stable clamping of workpieces. The heavy-duty construction and base ensure high stability during operation. The machine is also equipped with a cooling system and an emergency stop switch. Technical specification Parameter Value Fsdpfx Ajyvh Hqedrspk Model ZX7045B VARIO Max drilling capacity 45 mm Max face milling diameter 80 mm Max vertical milling diameter 32 mm Max tapping capacity M12 Spindle taper MT4 Spindle travel 130 mm Spindle speed 100 – 3200 rpm Speed control variable Max distance spindle–table 450 mm Distance spindle axis–column 286 mm Table travel X 580 mm Table travel Y 200 mm Table size 800 × 240 mm Head tilting ±45° Motor power 2.2 kW Power supply 400 V Machine dimensions 860 × 740 × 1200 mm Weight 375 kg Delivery to the customer is possible. Shipping cost is calculated individually by the transport company. If you are interested in other machines, please visit our website.

Condition: excellent (used), For sale: SEW-EURODRIVE WA20 DR63L4 geared motor with a three-phase electric motor. The unit is fully functional, tested, and ready for operation. Its technical and visual condition is good. Normal signs of wear and tear resulting from use are visible. Thanks to its robust construction, the geared motor is ideal for driving conveyors, feeders, production machines, and other industrial equipment. Technical data: Manufacturer: SEW-EURODRIVE Fjdpfx Ajznuqqjdrspk Gearbox type: WA20 Motor type: DR63L4 Power: 0.25 kW Power supply: 3×220–240 V Δ / 380–415 V Y, 50 Hz Motor speed: 1300 rpm Output speed: 27 rpm Gear ratio: i = 48.00 Output torque: 45 Nm Protection class: IP54 Insulation class: B Operating mode: S1 Weight: 8.8 kg

Condition: as good as new (ex-display), functionality: fully functional, Panel saw ALTENDORF HAND GUARD latest software 7/26 TwinFlex edition with 12" touchscreen, double sliding table, adjustable on both sides, manual parallel fence adjustment, parallel fence with fine adjustment, control panel at eye level, adjustable, dimension input via touchscreen, F 45 ElmoDrive control system, electric height adjustment, electric tilt adjustment, AKE tool clamping system, automatic correction of cutting height, when the saw unit is tilted, easy axis calibration, machine diagnostics, operating hour counter, USB interface, dust-proof ----- Technical data ----- Swivel range: 0 - 46 °, Cutting length: 3,000 mm, Cutting width: 1,000 mm, max. saw blade diameter: 450 mm, max. saw blade overhang: 150 mm, angle stop with fixed position: 90 °, manually adjustable via measuring scale: 3,200 mm, speeds: 3,000 / 4,000 / 5,000 rpm, motor power 400 V: 7.5 hp / 5.5 kW, screen size: 12 ", machine height: 91 cm Optical protection system: Two cameras collect data for hand recognition from a wide area around the saw blade. As soon as hands are detected in that area, the saw unit is quickly lowered and quickly stopped within a quarter of a second. EDITION TWINFLEX - Double sliding table 3,000 mm - Saw blade overhang 150 mm - Motor power VARIO 5 kW (6.8 hp) - Adjustable on both sides - Angle miter stop DIGIT LD, cutting length up to 3,200 mm - CNC parallel fence, cutting width 1,000 mm - On/off switch on the double sliding table - Template holder - Surcharge for motor power 6.5 kW (8.8 hp) ALTENDORF with VARIO, for adjustment on both sides - Scoring unit 2-axis, 2-sided, ALTENDORF with motorized height and side adjustment Scoring blade height programmable - Quick lowering and quick lifting, - Drive motor 0.75 kW (1 hp), 8,200 rpm. - Scoring system RAPIDO 180 mm ALTENDORF for adjustment on both sides - LED lighting on the scoring unit ALTENDORF - Double sliding table 3,400 mm, ALTENDORF - CNC parallel fence, 1,300 mm, ALTENDORF - Camera arm, can be swivelled out of the way ALTENDORF - Front support roller ALTENDORF Width 300 mm - Air cushion table ALTENDORF - Table extension 840 mm ALTENDORF with air cushion Fpedszgwl Iepfx Adrok - HandGuard 2025 new version The machine is sold with a new warranty of 1 year. The machine can be purchased at an absolute special price. We would be happy to make you an offer.

Year of construction: 1994, condition: good (used), Manufacturer: Boge Type: V LEX 45 Fpodpfxehtq Dve Adrjk Engine: 45 kW Capacity: 6.5 m³/min

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Manufacturer: Widax Kelch, face milling cutter head diameter 270 mm -Recording: Chalice 178 03 M Ø60 SK50 -Cutter head: Widia type WIDAX M45 D.250 R 13 -Number of teeth: 13 -Recording: SK50 -Dimensions: Ø 270 x 235 mm -Weight: 30.9 kg Fpsdpfx Adszqywzerjk

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 5,338 h, load capacity: 4,000 kg, lifting height: 6,580 mm, free lift: 2,000 mm, fuel type: diesel, mast type: triplex, construction height: 3,000 mm, fork carriage width: 1,300 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 250-15 Rear tire type: Superelastic Fjdpfezhc Iqox Adrspk Rear tire size: 250-15 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is workshop-tested and FEM 4.004 certified. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. Of course, we also buy your used equipment, even if you do not purchase a vehicle from us. Lease purchase and financing at favorable terms are available upon request. We will be happy to provide you with competent and detailed advice on our vehicles. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, load guard, particulate filter, full cabin, full free lift, CE certificate, safety light, interior mirror, exterior mirror, joystick, rotating beacon, windshield wiper, LED, seat.

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 3,045 h, load capacity: 8,000 kg, lifting height: 4,705 mm, free lift: 1,555 mm, fuel type: diesel, mast type: triplex, construction height: 2,700 mm, fork carriage width: 2,400 mm, fork length: 2,400 mm, empty load weight: 13,650 kg, total length: 3,600 mm, drive type: Diesel, construction width: 2,400 mm, Diesel forklift Load center: 600 mm Fork width: 200 mm Fork thickness: 70 mm ISO class: ISO Class 4 = 5,000 - 10,000 kg Fodszqhtdepfx Adrspk Mast type: Triplex Transmission: Electromechanical Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Pneumatic Front tires size: 8.25-15 Rear tires type: Pneumatic Rear tires size: 250-15 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our machines are workshop tested and certified according to FEM4.004. Please contact us by email or phone. You can also find us at hsr-gabelstapler. Of course, we will also purchase your used equipment even if you do not buy a vehicle from us. Lease purchase and financing under attractive conditions are available upon request. We are happy to provide you with professional and comprehensive advice on our vehicles. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, load guard, particle filter, full cab, full free lift, twin tires, interior mirror, exterior mirror, joystick, beacon, wipers, single-pedal, LED, seat,

Condition: good (used), Robot Fpsdjbrhtdjpfx Adrek Manfacturer: Staeubli Type: RX170

Condition: excellent (used), functionality: fully functional, Due to the closure of our sawmill, we have various machines and accessories for sale (see pictures). If you are interested, please do not hesitate to contact us. Fjdpsyi Erpsfx Adrjpk - 45 kW motor for Hacker (models 1-3) - New knife set for root reducer (no pictures available) - Gear wheels / brake discs for Heden forklift trucks (4+5) – forklift trucks are not for sale.

Condition: excellent (used), machine/vehicle number: IC1312, Year of construction: 2018, operating hours: 9,672 h, load capacity: 5,000 kg, lifting height: 3,180 mm, fuel type: gas, mast type: simplex, construction height: 2,400 mm, fork length: 2,400 mm, Equipment: cabin, 5123647 Serial Number: 517337J00036 Fpsdpfx Adjyyk Rgersk Internationaler Transport möglich/ International delivery available

Condition: good (used), Foellmer 45 ME Creaser Fpsdpfxeziyrco Adrjk The machine is in very good technical and visual condition. One owner since new. This is the newest model, currently in production. The machine has a working width of 450 mm. 380V power supply. Equipment includes a creasing bar, front margin, and side margin. This creaser is recommended for larger runs. It is quiet and powerful thanks to its geared motor drive. It is operated by a foot pedal.

Condition: new, Year of construction: 2026, The ZX7045 B1 DRO milling/drilling machine is an advanced tool created for precision metalworking. It is ideal for drilling, reaming, expanding holes up to 45/40 mm in cast iron, as well as threading screws up to M12 mm. With the ability to mill up to 80 mm wide, notch up to 22 mm, this machine offers versatile applications. The ZX7045 B1 DRO version is distinguished by its auto-feed of the spindle, which increases work efficiency. In addition, it is equipped with a digital readout, which increases the precision of operations, and a cooling system, taking care to maintain the optimum temperature during machining. This tool is ready to use right away, available from stock. Ideal for professionals who demand high quality and performance in metalworking. Product features HEAVY, STABLE CAST IRON AUTOMATIC SPINDLE FEED HEIGHT OF THE MILLING MACHINE IS ADJUSTABLE ON THE SLIDE AND NOT ON THE COLUMN ADDITIONAL LIQUID COOLING SOLID CROSS TABLE WITH PRECISION GROUND SURFACE DOVETAIL GUIDES, QUIET OPERATION THANKS TO GROUND GEARS LEFT AND RIGHT ROTATION HEAD ROTATABLE +/- 900 ADJUSTABLE HEAD HEIGHT DIGITAL READOUT Base available as an optional extra Fedpfxoud H H Us Adrspk TECHNICAL DATA Drilling capacity in steel 32 mm Drilling capacity in cast iron 45 mm FACE MACHINE DIAMOND 80 mm HANDS CAPACITY 28 mm SPEED RPM 50, 95, 100, 180, 190, 355, 360, 655, 710, 1260, 1310, 2520 rpm. (6/12) MANDREL HANDLE MT 4 Spindle feed 125 mm (AUTOMATIC FEEDING) DIMENSIONS OF THE WORKING TABLE 820 mm x 240 mm DIMENSIONS OF BASE 580 x 600 mm MAX. Spindle distance from the table 445 mm Spindle distance from column surface 260 mm AXIS MOVEMENT X/Y/Z 515/175/430 mm PINOLLE SPEED 0.12; 0.18; 0.25 mm/rev. 90° CLOCKWISE/LEFT HAND ROTATION MOTOR POWER 1,8 kW 2,5 hp POWER SUPPLY 400 V weight 350 kg Available accessories drill chuck shank MK4/B18 digital readout handy tools drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2 English language user manual

Condition: new, Year of construction: 2026, ZX7045 B1L milling and drilling machine is a versatile drill-mill designed for precision metal machining in workshop and production environments. The machine combines drilling and milling functions, ensuring stable operation thanks to its heavy cast-iron construction and a wide spindle speed range. It is a solution for facilities that require repeatability, rigidity, and real productivity. Main advantages Heavy, stable cast-iron body – minimizes vibrations during milling and drilling Automatic spindle feed (125 mm) – improves efficiency in batch operations Height adjustment on the support, not the column – greater setup precision 12 spindle speed ranges up to 3200 rpm – adaptable to material and tooling Equipped with coolant system – stable cutting conditions and extended tool life Dovetail guideways – high rigidity and movement accuracy Tilting head ±90° – enables angled machining Quiet operation thanks to ground gears and capability of both left- and right-hand rotation Construction and technology The ZX7045 B1L drill-mill is designed as a compact yet fully industrial metal milling machine. Its heavy base and cast-iron body ensure high system rigidity. The cross table (1000 × 240 mm) features a precision-ground working surface, allowing accurate workpiece clamping. The MT4 spindle taper enables the use of a wide range of tools, including end mills, face milling heads, and taper shank drills. The 1.8 kW (2.5 HP) motor, powered at 400 V, ensures stable performance even at larger milling diameters. Precision and performance With X/Y/Z travels of 560 / 190 / 430 mm, the machine supports a wide range of operations: drilling up to 32 mm in steel and 45 mm in cast iron, face milling up to 80 mm, and end milling up to 28 mm. Adjustable quill feed rates (0.12; 0.18; 0.25 mm/rev) allow parameters to be tailored to the material and quality requirements. Standard equipment Drill chuck arbor MT4/B18 Drill chuck 3–16 mm / B18 Reduction sleeve MT4/MK3 Reduction sleeve MK3/MK2 Basic tools User manual (Polish) Optional equipment Machine stand Automatic X-axis feed Swivel, tilting, and precision vises Rotary tables and dividing heads Fpedjy E Hk Hepfx Adrjk Tapping heads and milling heads Tool holders and drive arbors Technical specifications Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 45 mm Face mill diameter: 80 mm End mill diameter: 28 mm Spindle speeds: 95, 170, 190, 280, 340, 540, 570, 960, 1100, 1600, 1950, 3200 rpm (12 steps) Spindle taper: MT4 Spindle feed: 125 mm (automatic) Table size: 1000 × 240 mm Base dimensions: 440 × 600 mm Max. spindle-to-table distance: 445 mm Spindle-to-column distance: 262.5 mm X/Y/Z travel: 560 / 190 / 430 mm Quill feed rates: 0.12; 0.18; 0.25 mm/rev Head tilt (left/right): 90° Motor power: 1.8 kW (2.5 HP) Power supply: 400 V Weight: 375 kg

Condition: new, Year of construction: 2026, Machine Characteristics Heavy, Stable Cast Iron Body: A solid structure based on a heavy cast-iron frame ensures stability and durability, even during intensive use. Milling Height Adjustment on the Support: A unique height adjustment system located on the support, rather than on the column, allows the machine to be adapted to various applications. Massive Cross Table for Milling/Drilling: The large, precisely ground table surface provides a solid base for a wide range of projects. Dovetail Guides: Innovative dovetail-shaped guides ensure smooth movement along all three axes, resulting in excellent machining precision. Quiet Operation Thanks to Ground Gears: Ground gears ensure quiet operation, improving working comfort in the workshop. Left and Right Spindle Rotation: Operate the tool in both directions to suit different tasks. Fpsdpfxjx Dkr Ns Adrek Tiltable Head (+/- 90°) and Adjustable Head Height: Flexible angle adjustments and head-height control provide full machining versatility. Digital Longitudinal and Cross Readouts Additional Options, Additional Benefits The ZX 7045E DRO version is available immediately from stock, and you also receive a free accessory set: Drill chuck Reducing sleeve MK4/MK3 Reducing sleeve MK3/MK2 ZX 7045E DRO Milling-Drilling Machine The ZX 7045E DRO is a high-precision, advanced machine tool designed for reliable metalworking performance. Equipped with digital readout systems (DRO) and a robust construction, it enables accurate milling and drilling across a wide range of materials. Thanks to its versatility and reliability, the ZX 7045E DRO is an ideal solution for professional workshops, meeting the demands of even the most complex machining applications. (The base is available as an optional accessory.) Technical Specifications Maximum drilling diameter: 45 mm Maximum face mill diameter: 80 mm Maximum end mill diameter: 28 mm Maximum thread diameter: 12 mm Spindle quill travel: 100 mm Spindle taper: MT4 Spindle speeds (6 speeds): 95, 170, 280, 540, 960, 1600 rpm Maximum distance spindle nose–table: 460 mm X / Y / Z travel: 500 / 210 / 425 mm Distance spindle–column surface: 245 mm Worktable dimensions: 730 × 210 mm Base dimensions: 400 × 600 mm Motor (S1/S6): 1500 W / 2100 W, 400 V Machine dimensions (with base): 1080 × 770 × 1460 mm Weight: 278 kg Included Equipment 2-axis digital readout MK3/B18 drill chuck arbor Hand tools 3–16 mm drill chuck (B18) Reducing sleeve MK4/MK3 Reducing sleeve MK3/MK2 User manual

Condition: new, Year of construction: 2026, The drilling and milling machine can be used for drilling, reaming and expanding holes up to 45/40 mm in cast iron and threading screws up to M12 mm, milling up to 80 mm wide, and notching up to 22 mm. It is also suitable for cutting and face milling. The machine is available from stock. Machine characteristics The machine can be used for drilling, reaming and expanding holes up to 45/40 mm in cast iron and threading screws up to M12 mm, milling up to 80 mm wide, and notching up to 22 mm. It is also suitable for cutting and face milling. Various accessories can be fitted to it. HEAVY, STABLE CAST IRON THE HEIGHT OF THE ROUTER IS ADJUSTABLE ON THE SLIDE AND NOT ON THE COLUMN SOLID CROSS TABLE FOR THE MILLING/DRILLING MACHINE WITH PRECISION GROUND SURFACE DOVETAIL GUIDES, QUIET RUNNING THANKS TO GROUND GEARS LEFT AND RIGHT ROTATION OPTIONAL HEAD +/- 90 degrees ADJUSTABLE HEAD HEIGHT Machine base available as an optional extra - 200€ Technical data MAXIMUM DRILLING SIZE 45 mm MAXIMUM FACE DRILLING 80 mm MAXIMUM FACE MILLING 28 mm MAXIMUM THREADING 12 mm SPINDLE PASSAGE 120 mm SPINDLE TAPER MT4 SPINDLE SPEED (6 MOTOR SPEEDS 1400r/min ) 95,170,280,540,960,1600min-1 MAX. DISTANCE FROM SPINDLE TIP TO TABLE 475 mm DISTANCE FROM SPINDLE TO COLUMN SURFACE Fpjdpfeud H Huex Adrjk 260 mm WORKING TABLE DIMENSIONS 820 x 240 mm TABLE TRAVEL 550 x 170 mm MOTOR 1,1kW / 1,5hp Voltage (two options to choose from) 400V (three-phase motor) PACKING DIMENSIONS 1140 x 800 x 1040 mm NET WEIGHT 270 kg Available accessories MK4/B18 drill chuck shank handy tools Drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2 instruction manual in Polish

Condition: new, Year of construction: 2026, This machine can be used for drilling, reaming and boring holes up to 45/40 mm in cast iron, threading up to M12 mm bolts, up to 80 mm milling and up to 22 mm notching. It is also useful for cutting and frontal milling. ZX 7045 B1 is by default equipped with an autofed spindle and a cooling system. Base available optionally. Rigid, sturdy cast iron Autofed spindle Milling machine height adjusted on the support, not on the column Additional flood coolant system Rigid cross table with precisely ground surface Dovetail-shaped guides Quiet work due to the ground gears Left/right rotation +/- 90° rotary head Adjustable head height Base available optionally Technical data Steel drilling efficiency 32 mm Cast iron drilling efficiency 45 mm Frontal mill diameter 80 mm Arbor mill diameter 28 mm Spindle speed 50–3024 rpm (6/12) Arbor chuck MK4 Spindle feed 110 mm (automatic feed) Worktable dimensions 820 mm×240 mm Fodpfsvxth Hex Adrspk Maximum distance from spindle to table 475 mm X-axis longitudinal travel 550 mm Y-axis transverse travel 170 mm Left/right rotary head 90° Motor power 1.3/1.8 kW Power supply 400V Weight 360 kg

Condition: new, Year of construction: 2026, The ZX 7045E milling/drilling machine is a versatile tool for machining steel . It is ideal for drilling, reaming, boring, threading , milling and face milling. The machine allows precise drilling of holes in cast iron up to 45/40 mm in diameter. In addition, bolts up to M12 mm can be threaded, up to 80 mm wide can be milled and rebates up to 22 mm deep can be made. The ZX 7045E milling/drilling machine is a reliable tool ready to go! Machine characteristics Heavy Stable Cast Iron: The robust construction based on heavy cast iron ensures stability and durability of the machine even during intensive use. Milling machine height adjustable on the slide: The unique height adjustment on the slide, rather than on the column, allows the machine to be adapted to different applications. Massive Cross Table for Milling/Drilling Machine: An impressively sized table with a precision-ground surface provides a solid base for a variety of projects. Swallow Tail Shaped Guides: Innovative dovetail-shaped slides guarantee smooth movements in three axes for excellent machining results. Quiet Operation Thanks to Ground Gear Wheels: The ground gears make the machine run quietly, which contributes to comfort in the workshop. Left and Right Rotation: Rotate the tool in both directions, adapting to different tasks. Pivoting head +/- 90 degrees and Adjustable head height: Flexibility in angle setting and height adjustment allow full control over material processing. Additional Options, Additional Benefits: The ZX 7045E version is available from stock and you will also receive a kit free of charge: Drill chuck Reduction bush MK4/MK3 Reduction bush MK3/MK2 The ZX 7045E milling/drilling machine is not just a tool, it is a partner that can meet even the most demanding challenges in your workshop. Order now and experience perfect precision and performance! (Base available as an option) Technical data Maximum drilling diameter 45 mm Maximum face milling diameter 80 mm Maximum cylindrical milling cutter diameter 28 mm Maximum thread diameter 12 mm Spindle pin protrusion 100 mm Spindle taper MT4 Spindle speed (6 speeds for 1400r/min motor) 1400r/min ) 95, 170, 280, 540, 960, 1600min-1 Maximum distance from spindle nose to table 460 mm Travel in X / Y / Z axis 500 / 210 / 425 mm Distance from spindle to column surface 245 mm Work table dimensions 730x210 mm Base dimensions 400x600 mm Fedpjud Iztefx Adropk Motor s1/s6 1500W/2100 W 400V Machine dimensions (height with base) 1080 x 770 x 1460 mm Weight 278 kg Available accessories MK3/B18 drill chuck shank handy tools drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2

Condition: good (used), Clamping angle, clamping aid Fsdpfx Adozn I E Uerjpk -Clamping angle: for workpiece clamping -Wall thickness: 30 mm -Groove: 45x24 mm / 34x18 mm -Dimensions: 270/145/H200 mm -Weight: 15.5 kg