Used Barkey Plasmatherm Laboratory Plasma Thawer for sale (1,975)

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, total length: 2,100 mm, total width: 730 mm, heating capacity: 7.5 kW (10.20 HP), screw conveyor diameter: 35 mm, machine/vehicle number: DE27307, TECHNICAL DETAILS Capacity: 30 – 80 kg/h Screw diameter: 2 x 35.0 mm L/D ratio: 20:1 Screw speed: 80 rpm Gearbox ratio: 12:1 Iijdpozargnofx Aqwod Number of heating zones: 5 Heating power: 7,500 W Number of cooling fans: 5 Extruder discharge height: 1,150 mm MACHINE DETAILS Control system: Analog, contactor-controlled system Drive / Motor: 20 kW (DC) Cooling fan connection: 230 V Gearbox type: Lenze Material: PE, PP, PS, ABS Design: Co-rotating, degassing, vacuum pump Dimensions (L x W): 2,100 x 730 mm Note: Water bath and granulator can be purchased for an additional charge.

Condition: like new (used), Year of construction: 2018, Set for robotic plasma welding .( Robot not included - without robot ) Shipping to EU countries is our responsibility and the shipping cost is free. Iodpfsrfuc Hex Aqwjid

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, working range: 3,000 mm, sheet thickness (max.): 10 mm, table length: 3,000 mm, working width: 1,500 mm, Carbonini plasma cutting machine, model Entry, with a working area of 3000x1500 mm. Complete with two Thermal Dynamics current generators. Work performed: Iiodpfxjzdrz So Aqwod - Replacement of the work surface - Replacement of the sliding guides - Management software for handling sheet metal parts Thermal Dynamics CUTMASTER 151 plasma cutter, maximum cutting capacity of 100 Amps, 30 mm. Thermal Dynamics CUTMASTER 51 plasma cutter, maximum cutting capacity of 40 Amps, 12 mm.

Condition: excellent (used), Max. operating temperature: 300°C Internal dimensions (W x H x D): 400 x 380 x 370 mm Internal volume: 57 liters Power consumption: 1.4 kW Electrical connection: 230 V Iisdpjy Uwr Hefx Aqwed Footprint: 750 x 610 x 550 mm Approximate weight: 50 kg

Condition: excellent (used), Rated temperature: 1100°C Iedpoy Uwqvofx Aqwoid Usable chamber dimensions (W x D x H): 200 x 300 x 150 mm Electrical connection: 230 V, 1.4 kW Heating-up time: 100 min. Footprint: 752 x 576 x 700 mm Weight: 78 kg

Condition: new, Year of construction: 2025, PLA-65A PLASMA CUTTER The machine, which is able to make fast, precise and high-quality cuts up to 25 mm, was specially developed for manufacturers of ventilation ducts, advertisers and customers using thin sheets. Together with the economic price, this machine CNC plasma cutting machines equipped with ergonomic functions have become an indispensable helper for customers in this matter Isdpfefwmrpsx Aqwoid industry. Technical data: Hypertherm Powermax plasma source Power: 65A Max power consumption 11 kw Speed m / min 20 X / Y / Z 1500 3000 150 working area Weight: 1000 kg Loudness: 69 dB (A) Dimensions: Length: 3700 mm Width: 2200 mm Height: 1300 mm Equipment: Source - power hypertherm max 65A Controler CNC +THC PC computer

Condition: new, Year of construction: 2025, Roller width 350 mm roll diameter 110 mm Roller covering - soft rubber 70 Grad shore rubber NBR - Qualität air pressure max. 4 bar Pressure line 28 N / mm Capacity of dye tub Zwickel - 0,3 Liter Capacity of dye tub Becken - 1,3 Liter Speed driven roll 0-25 U/min speed 1 - 10 m/min voltage 230 V / 50 Hz drive motor 0,4 kW weight 130 kg dimensions 1050 x 800 x 810 mm • 2-Roll-laboratory padder for horizontal and vertical roller-arrangement. • The changing from horizontal to vertical roller arrangement can be effected by easy re-allocation of the upper squeezing roll with the pressure cylinders, • small trough for vertical roller-arrangement, • content: 1.3 litres, • with controllable motor drive, • direct drive to the fixed roll, Iiedpsu Dn Uvjfx Aqwed • by means of wheels the pressure roll is driven when the nip is open.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 590 h, functionality: fully functional, table length: 6,000 mm, table width: 2,000 mm, Machine with only 590 cutting hours! Submitting a bid obligates you to collect the machine by June 30, 2026! TECHNICAL DETAILS Table length: 6,000 mm Table width: 2,000 mm Piercing: up to 16 mm Iodpfszc Euqsx Aqwjid Maximum permissible sheet metal thickness: 100 mm MACHINE DETAILS Operating hours Machine running hours: 5,400 h Cutting hours: 590 h EQUIPMENT Power source: Hypertherm Powermax 65 Pin marker TEKA filter system Thanks to a compatible cutting head, 125 amps are possible with the installation of a new power source.

Condition: used, Plasma cutting unit, plasma cutting machine MESSER GRIESHEIM Type Plasmastar HA 95 Serial No. 4040323 Year of manufacture: 1990 Power: 95 Amp. - 60% duty cycle 45 Amp. - 70% duty cycle Adjustment range: 2 steps Cutting capacity: 25 mm (clean cut) Severance cut up to 45 mm Hand torch: PHC 95/140 Power supply: 380 Volt, 50 Hz, 32 Amp. plug - Water-cooled Ijdpfx Aoyah R Neqwjid - New hand torch BINZEL ABICOR, Type Abiplas Cut 200 W - 6 meter hose package length - Operating manual Space requirements (L x W x H): 900 x 480 x 850 mm Weight: 160 kg Very good condition

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 403/05, table length: 3,000 mm, power of the servo motor: 1,500 W, table width: 1,500 mm, Equipment: double-sided, With plasma cutting system HyperTherm Powermax 1100 and air drier M.T.A. DE009 Machine was used in the production of ventilation ducts and fittings. AsperWin (base program for operating CNC machine for Windows. Dxf-files can be imported) Asper Nesting (enables effective creation of nests with a big number of different cut parts to achieve best possible utilization of material with minimum waste) and Air Select (for ductwork manufacturers enables fast and comfortable design of HVAC components). Iedjw I D Iajpfx Aqwoid

Condition: excellent (used), Year of construction: 2017, working range: 4,000 mm, overall weight: 6,500 kg, total width: 2,400 mm, total height: 2,600 mm, total length: 6,000 mm, Working area X Axis:4000mm Iisdpfx Aqjy T Hywowod Working area Y Axis:2000mm Working area Z axis:400mm Power resonator: 300kW / Amp Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Dust collector: Kemper Length: 6000mm Width: 2400mm Height: 2600mm Weight: 6500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1995, condition: used, Dust extractor,welding fume extractor by Herding. Self-cleaning,pneumatic filter for plasma,laser,sandblasting,sodding,grinding plaster,cement,plastic and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. High-quality filter cartridges of HSL type are made of sintered polyethylene with the possibility of cleaning have several times longer service life compared to ordinary cartridges. As standard, the coating is made of PTFE, which in combination with the material of the body (PE) provides a very high chemical durability. 4 Kw fan Iisdpfjpwhl Uex Aqwjd Capacity - 1680 m3/h

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch). Iodpfx Aetp Dhpoqwsid  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, MESSER MULTITHERM 3600 GLOBAL CNC PLASMA BED LENGTH 10300mm BED WIDTH 2100mm RAIL WIDTH 3650mm HYPERTHERM HPR 260. Cutting capacities: Mild steel cut capacity Dross free* 32 mm (1-1/4") Iijdoy Tpqxspfx Aqwsd Production pierce 38 mm (1-1/2") Maximum cutting capacity 64 mm (2-1/2") Stainless steel cut capacity Production pierce 32 mm (1-1/4") Maximum cutting capacity 50 mm (2") Aluminum cut capacity Production pierce 25 mm (1") Maximum cutting capacity 50 mm (2")

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting Iisdpjvpalaefx Aqwed and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: used, Year of construction: 2014, functionality: fully functional, ■ Infeed roller conveyor (length 6m, width 2000mm, roll diameter 159mm, roll distance 800mm, capacity 1250kg/m, including liftable datum line) ■ V320-2000 Plate processing system (base frame with vertical drilling unit, automatic tool changer and automatic discharge table) ■ Feeder trucks (servo driven, master truck with 3 hydraulic clamps, support truck with 2 hydraulic clamps) ■ Swarf brush (automatic swarf removal after drilling operations) ■ Oxy-fuel cutting torch (1 pcs, with automatic height control IHT M4000 Cap) ■ Plasma cutting unit Hypertherm HPR260XD (1 pcs, automatic gas console, complete with cutting parameter database) ■ Fume extraction unit Donaldson DFPRO6 ■ Product conveyor belt ■ Outfeed roller conveyor (length 3m, width 2000mm, roll diameter 159mm, capacity 1250kg/m) ■ Hardware and software (including VACAM ‘Machine Edition’, VACAM ‘Office Edition’) ■ Safety devices (safety fencing, light curtain, light curtain muting) ■ Year of construction 2014 Technical specifications Operating range V320-3000 Min. / max. plate length 850 – 6.100 mm Min. / max. plate width 200 – 2.050 mm Min. / max. plate thickness 6 – 75 mm Max. capacity 7.500 kg Material Mild steel Drilling unit VD40 Automatic tool changer 10 positions Feed Synchronous driven servomotor, servo-inverter Spindel rpm Step less 0 – 2.500 rpm (servomotor) Nominal power 30 kW Lubrication Internal and external by mist of air / oil Tool holder SK 40 Drill diameter 5 – 40 mm Thread tapping M6 – M24 Centre point marking possibility Yes Countersinking possibility Yes Layout marking possibility Yes Ijdpfx Aqsy E Nxgjwjid Hydraulic clamping Yes Plasma cutting unit HPR260XD Max. thickness 64 mm Max. pierce capacity 38 mm Dross-free cutting max. 32 mm Marking Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / Air (99,9% pure clean, dry, oil-free) Cutting speed 6 mm Approx. 4.035 mm / min 130A 12 mm Approx. 3.060 mm / min 200A 25 mm Approx. 1.660 mm / min 260A 50 mm Approx. 590 mm / min 260A 64 mm Approx. 195 mm / min 260A * Grounding max. 6 m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. Oxy-fuel cutting unit Type Nozzle mix Automatic height setting Yes Gas supply Magnetic valve with back-fire protection Ignition Automatically Max. thickness 75 mm Gas Propane Optional gas Acetylene Cutting gas O2 Operating direction From left to right General information Voltage stabilizer Not included Current Transformer Not included Ambient temperature 0 – 35°C max. 95% relative humidity Working height 760 mm (+/- 25 mm)

Condition: used, Year of construction: 2014, ■ V304 plate cutting machine capable of processing plates up to 1.500mm x 3.000mm ■ V304 plate processing machine (including gantry beam 2.500mm and side trucks) ■ X-rail (5.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ■ Plasma cutting and extraction table (1.600mm x 3.090mm, 1 pcs) ■ Plasma cutting unit Kjellberg HiFocus280i (1 pcs) ■ Torch suspension for plasma cutting unit (including IHT M4000 PCS automatic height control) ■ Carriage for cutting unit (motor driven, including laser pointer, 1 pcs) ■ Kemper fume extraction unit 81 0550 090 (including spark trap 1 pcs) ■ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module) ■ Safety devices (safety bumpers, emergency stop cord) Technical specifications Iodpsy E Nykjfx Aqweid PLASMA CUTTING UNIT HIFOCUS 280i Material Mild steel, stainless steel, aluminum Min. thickness 3 mm Max. thickness 70 mm Max. pierce capacity 40 mm Dross-free cutting max. 35 mm Automatic height setting Yes, IHT M4000 PCS Marking lines Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / air (99,9% pure clean, dry, oil-free) Automatic gas console Yes Cutting speed mild steel 6 mm Approx. 4.100 mm / min 90A 12 mm Approx. 3.200 mm / min 160A 25 mm Approx. 2.000 mm / min 280A 40 mm Approx. 720 mm / min 280A 50 mm Approx. 400 mm / min 280A 70 mm Approx. 150 mm / min 280A * Grounding max. 6m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. COLOUR Plates RAL 3003 Red Frames RAL 7011 Grey GENERAL INFORMATION Working height 700 mm (+/- 20 mm) Voltage stabilizer Not included Ambient temperature 0 – 35°C max. 95% relative humidity

Condition: used, functionality: fully functional, Year of construction: 2008, Peddinghaus FDB 1000/3 – CNC Plate Drilling & Profiling System– Year 2008 6 metres x 1 metres Capacity. Iijdpfx Aey E N Hdeqwod Maximum workpiece width 1000 mm. Maximum workpiece thickness 50 mm. 3 x drilling spindles. Maximum drilling diameter 40 mm. Oxy‐Fuel. Hypertherm Plasma. Kemper Extraction Unit

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 25400 € 485.14 € 1250x2500 mm HYPERTHERM Powermax 45 XP 6 mm 12 mm 25 mm 4 mm 45 A 45 A 50 % ED, 32 A 100 % A 24 m/min 1/10 mm 470 l 500 kg/m² 3060 mm 1760 mm 1500 mm 500 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) height adjustment by arc voltage set-up laser precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 Sync plasma type comp. air comp. air comp. air comp. air plunge power 16 mm 20 mm 22 mm 25 mm seperating cut 32 mm 38 mm 50mm 57mm recommended thickness (unalloyed steel) 6 mm 16 mm 19 mm 22mm max. thickness (unalloyed steel) 16 mm 20 mm 22 mm 25 mm price € 26.900,- € 28.400,- € 29.900,- € 32.800,- OPTIONS: water tank to quickly fill and drain thetrough € 2.870,- pneumatic marking pin € 770,- pneumatic engraver € 1.920,- suction bridge (prepared for suction diam.160mm, important for galvanized and thin sheets) € 1.020,- suction- and filter unit Caremaster IFA 1,1 kW, fan power 2.500 m³/h € 2.950,- higher gantry 200 mm € 710,- higher gantry 300 mm € 900,- automatic nesting € 500,- PlasmaScan camera system € Iiodpfx Aswiryujqwjd 830,- ohmic contacting for MaxPro200 € 280,-

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 23200 € 445.44 € 1000x2000 mm HYPERTHERM Powermax 45 XP 6 mm 12 mm 25 mm 4 mm 45 A 45 A 50 % ED, 32 A 100 % A 24 m/min unter 1/10 mm 300 l 400 kg/m² 2560 mm 1460 mm 1500 mm 400 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) height adjustment by arc voltage set-up laser precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 plasma type comp. air comp. air comp. air comp. air plunge power 16 mm 20 mm 22 mm 25 mm seperating cut 32 mm 38 mm 50mm 57mm recommended thickness (unalloyed steel) 6 mm 16 mm 19 mm 22mm max. thickness (unalloyed steel) 16 mm 20 mm 22 mm 25mm Iiedswiq Scjpfx Aqwjd price € 24.600,- € 26.100,- € 27.600,- € 30.600,- Options: water tank to quickly fill and drain thetrough € 2.360,- pneumatic marking pin € 770,- pneumatic engraver € 1.920,- suction bridge (prepared for suction diam.160mm, important for galvanized and thin sheets) € 1.020,- suction- and filter unit Caremaster IFA 1,1 kW, fan power 2.500 m³/h € 2.950,- higher gantry 200 mm € 710,- higher gantry 300 mm € 900,- automatic nesting € 500,- PlasmaScan camera system € 830,- ohmic contacting for MaxPro200 € 280,-

Year of construction: 2024, condition: new, Everything can be configured according to your requirements; very short production and delivery times. Upon request, we will gladly provide you with further information. Technical data available upon request. Standard equipment: Steel welded construction DURMA CNC control unit (AURORA) Remote control diagnostics (Ethernet) Lantek software with automatic nesting Position determination of the sheet to be cut using a laser DURMA torch height control Double-sided drive system (rack and pinion) AC servomotors for movement in the X and Y axes CNC control outputs/inputs for the filter unit Consumables starter kit Plasma torch * Ignition console * Torch height control with Ball screw spindles on double Linear guides * Optional equipment: Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Hypertherm HPR 130 XD + hose package + nozzles + Durma THC + ignition console + torch Hypertherm HPR 260 XD + hose package + nozzles + Durma THC + ignition console + torch Hypertherm + Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + torch CE standard safety wire Automatic gas console for Hypertherm, Manual gas console for Hypertherm, Oxy-fuel cutting torch Plasma torch protection system Manual plasma angle cutting head, CNC angle cutting head (+/- 45). Single drilling head Multi-drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Warning light for errors and program end With over 60 years of experience in research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced manufacturing plants with a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned producers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Giessen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing you with competent advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to get an overview of our machines on site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our mission is to be your direct contact on site and offer you services related to training and customer service. We are happy to support you now from Germany - from consulting, through purchasing and throughout the entire service life of your machine. With our German branch, we are always available locally when you need us in order to react quickly and efficiently. Iiodpjfirx Nefx Aqwod Here, we are your reliable partner for technologically advanced solutions when it comes to sheet metal processing.

Condition: used, Year of construction: 2010, machine/vehicle number: VG6000 3224, Equipment: documentation/manual, Koike Versagraph 6000, including cutting tables. Excluding strips. The machine was fully functional until April 2022. Iijdpezdz U Ujfx Aqwod It has been disassembled and stored since 2022. Original new price: 450,000 euros.

Condition: new, Year of construction: 2024, Everything can be configured according to your needs, with very short production and delivery times. Upon request, we will gladly provide you with further information. Technical data available upon request. Standard equipment: Steel welded construction DURMA CNC control unit (AURORA) Remote control diagnostics (Ethernet) Lantek software with automatic nesting Position determination of the sheet to be cut using a laser DURMA torch height control Double-sided drive system (rack and pinion) AC servomotors for movement in the X and Y axes Iisdpsfiqgrefx Aqwsd CNC control outputs/inputs for the filter unit Consumables starter kit Plasma torch * Ignition console * Torch height control with Ball screw spindles on double Linear guides * Optional equipment: Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Hypertherm HPR 130 XD + hose package + nozzles + Durma THC + ignition console + torch Hypertherm HPR 260 XD + hose package + nozzles + Durma THC + ignition console + torch Hypertherm + Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + torch CE standard safety wire Automatic gas console for Hypertherm Manual gas console for Hypertherm Oxy-fuel cutting torch Plasma torch protection system Manual plasma angle cutting head CNC angle cutting head (+/- 45) Single drilling head Multi-drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Warning light for errors and program end With over 60 years of experience in the research and production of machines for sheet metal processing, with 8,000 machines produced annually in three technologically advanced manufacturing facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing you with competent advice and support when it comes to sheet metal processing machines. Our showroom offers you the opportunity to gain an overview of our machines on site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our mission is to be your direct point of contact on site and to offer you services related to training and customer service. We are now happy to support you from Germany – from consulting to purchasing and throughout the entire life cycle of your machine. With our German branch, we are always there for you, so that we can react quickly and efficiently. Here, we are your reliable partner for technologically advanced solutions in sheet metal processing.

Condition: new, Year of construction: 2024, Everything is configurable upon request, with very short production and delivery times. Upon request, we will gladly provide you with further information. Technical data available upon request. Standard equipment: Steel welded construction DURMA CNC control unit (AURORA) Remote control diagnostics (Ethernet) Lantek software with automatic nesting Position determination of the sheet to be cut using a laser DURMA torch height control Double-sided drive system (rack and pinion) AC servo motors for movement in the X and Y axes CNC control outputs/inputs for the filter unit Consumables starter kit Plasma torch * Iodpfxsfirx To Aqwjid Ignition console * Torch height control with Ball screws on double Linear guides * Optional equipment: Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Hypertherm HPR 130 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch HPR 260 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch + Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + torch CE standard safety wire Automatic gas console for Hypertherm, Manual gas console for Hypertherm, Oxy-fuel cutting torch Plasma torch protection system Manual plasma bevel cutting head, CNC bevel cutting head (+/- 45). Single drilling head Multi-drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Warning light for errors and program end D9hnyc97o With over 60 years of experience in the research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced production facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact person from the Durmazlar team, who will competently assist you with advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to get an overview of our machines on site, to be convinced firsthand by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our task is to be your direct contact person on site and to offer you services relating to training and customer service. We would now like to support you from Germany – from advice to purchase and throughout the entire life cycle of your machine. With our German branch, we are always on site when you need us to be able to react quickly and efficiently. Here, we are your reliable partner for technologically advanced solutions when it comes to sheet metal processing.

Year of construction: 2024, condition: new, Machine dimensions: • (L x W x H) 5,240 mm x 3,600 mm x 2,400 mm • Width with console: 7,700 mm • Length with filter: 11,000 mm Technical details: • Max. sheet size: 4,000 x 2,000 mm • Cutting speed: 12 m/min • Positioning accuracy: ± 0.1 mm • Repeatability: ± 0.1 mm • Power (Hypertherm XPR 170 XD Optimix): 170 A • Cutting range: • Unalloyed steel, piercing, argon: 40 mm • Unalloyed steel, piercing, air: 35 mm • Unalloyed steel, contour cutting: 60 mm • Alloyed steel, piercing: 22 mm • Alloyed steel, contour cutting: 38 mm • Aluminum, piercing: 25 mm • Aluminum, contour cutting: 38 mm Standard equipment: • Control system: Durma Aurora CNC controller • Truehole Standard • Sheet metal measurement using laser • Torch height control • AC servo motors for X and Y axis • Software: Lantek or Metalix CAD/CAM software with autonesting • 50 pre-programmed part geometries for easy and quick modification • Consumable kit (torch nozzles, etc.) • Plasma torch • Ignition console • Remote control: remote maintenance Options include: • Hypertherm XPR 170 XD + Optimix + automatic gas control • Filter for HPR 170 XD • Safety system with surrounding safety wire • Oxy-fuel torch with sensor Iodpfx Aedyfwkoqwsid • Plasma torch – interruption system • Air dryer