Fume extraction for plasma,laser Herding

Herding HSL 900-8/18SB

Condition: good (used), Year of construction: 1995, functionality: fully functional, pressing force: 70 t, filling opening width: 1,060 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 23,000 kg, noise level: 85 dB, power: 37 kW (50.31 HP), Used BOA 2060 for sale. The machine is currently stored in Belgium. It has been operational up until now and is currently disconnected. The machine is sold as-is, but a possible overhaul can be offered upon request. Technical data: Gbsdpfx Apeya Uwpo Dsu Drive: 37 kW Pressing force: 70 tons Bale dimensions: 1100 x 720 mm Number of wires: 4 vertical, 2 horizontal Filling hopper dimensions: 1500 x 1060 mm Bale weight: approximately 500 kg (depending on material) Capacity: up to 14 tons per hour (depending on material) Press weight: 23,000 kg

Condition: good (used), Machines pictures 1 to 9 Gillardon price 9500,-€ Technical data: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 27 - Drill spindle holder MK 4 - Quill stroke 150 mm - 12 drill spindle speeds 102 - 2000 rpm - 3 drilling feeds 0.1 - 0.3 mm - min. / max. distance spindle - table 310 / 610 mm Godpfx Aeu Nm Nisp Dsbu - Drilling radius min / max 400 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 1.6 / 2.9 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the rear side of the machine Machine 2 pictures 10 to 15 HKS 34 MT Price 16.500,-€ Drilling capacity 45mm Table size : 1200 x 560 mm drilling capacity 45mm Spindle holder MK 4 quill stroke 170mm Speed / steps 70-2000 rpm Feed rate / steps 0.1 0.2 0.3mm/rev Motor 2.9 KW

Condition: excellent (used), Baling press Hsm HL 4809 - Large filling opening, ideal for large boxes - Container tipper for convenient filling Power in kN: 480 - Motor in kW: 10.7 - Voltage/frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 400 kg - Bale dimensions length x width x height in mm: 1200 x 1100 x 750 - Dimensions of the device length x width x height in mm: 5648 x 1849 x 2515 Idle cycle time in seconds: 53 Gbodpfsv Ak Npjx Ap Dju - Manual tying: 4 times with wire Year 2015-2017 Complete baler, side housings unscrewed for transport Balers after inspection by an authorized service center

Condition: good (used), Year of construction: 2009, functionality: fully functional, pressing force: 61 t, filling opening width: 1,420 mm, filling opening length: 972 mm, bale width: 1,100 mm, bale height: 720 mm, total width: 2,085 mm, total length: 8,740 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 18,000 kg, pressure: 280 bar, oil tank capacity: 800 l, power: 22 kW (29.91 HP), Used Baseline 60 machine for sale. The machine underwent its last maintenance check in March 2026, during which no significant issues were identified. The machine is fully functional and has since been taken out of production. It is in good condition and is currently located in France. Technical specifications of the machine: Year of construction: 2009 Main pump drive: 22 kW Needle drive: 4 kW Filter pump: 2.2 kW Oil cooler: 1.5 kW Working pressure: 280 bar Oil tank capacity: 800 L Pressing force: 61 tons Specific pressing pressure: 7.7 kg/cm2 Gbsdpfx Apezlnb Do Dsu Pressing stroke: 2000 mm Dimensions of pressing channel: 1100 x 720 mm Volume of pressing chamber: 1.6 m3 Bale length (adjustable): 1300 mm Bale weight (approximate): up to approx. 500 kg Number of binding wires: 5 vertical Dimensions of feeding hopper: 1420 x 972 mm Weight of press: approx. 18 tons Noise level: < 85 dB(A) Average cycle time: 19.2 sec Capacity (depending on the material, material feed, and bale weight): 30 kg/m3: 6.9 tons/hour 60 kg/m3: 12.8 tons/hour 100 kg/m3: 19.2 tons/hour 150 kg/m3: 25.8 tons/hour

Condition: used, Year of construction: 2012, functionality: fully functional, Strautmann baling press, type BaleTainer, pressing force 60 t, year of manufacture 2012 Technical data: Manufacturer: Strautmann Umwelttechnik Type: BaleTainer Year of manufacture: 2012 Pressing force 60 t Total connection power 30 kW Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 straps Bale weight up to 400 kg (3 straps) Binding: 4-way vertical Dimensions: 5,348 x 2,113 x 2,752 mm (L x W x H) Weight approx. 7,280 kg Materials: Paper, cardboard, PET bottles, film Note: The press is in good working order and has been inspected and tested. A video can be found on our website or YouTube channel. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is non-binding, subject to prior sale and may be withdrawn at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty. Gbjdpez A T U Uofx Ap Dju

Condition: excellent (used), Year of construction: 2021, operating hours: 1,118 h, functionality: fully functional, HSM baling press, type HL 7009 ST/A, year of manufacture 2021 Technical data: Manufacturer: HSM Type: HL 7009 ST/A Year of manufacture: 2021 Operating hours: 1118 Pressing force: 70 t Specific pressing force: 58 N/cm² Drive power: 11 kW Feed opening: 1020 x 900 mm Gedpfx Aszvluvep Djbu Bale size: 1100 x 1100 mm (W x H x D) Bale weight: up to 600 kg Tying: 4-way horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (L x W x H) Weight: 7500 kg Materials: Paper, cardboard, film Note: The press is in good condition and has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without any warranty.

Condition: used, Year of construction: 2018, pressing force: 80 t, filling opening width: 1,040 mm, filling opening length: 1,110 mm, bale length: 1,200 mm, bale width: 1,120 mm, bale height: 1,120 mm, bale weight: 600 kg, total width: 1,830 mm, total height: 2,620 mm, total length: 4,200 mm, type of input current: three-phase, input voltage: 400 V, input current: 32 A, overall weight: 8,000 kg, input frequency: 50 Hz, DIXI 80 SLD Horizontal Baler – Year of Manufacture 2018 Used, fully functional DIXI 80 SLD horizontal baler for the economical compaction of cardboard, paper, and comparable recyclable materials. Gjdpfx Aoz Hqwbjp Debu Technical data: Manufacturer: DIXI Model: 80 SLD Year of manufacture: 2018 Pressing force: 80 t Drive power: 11 kW Connection: 400 V / 32 A Feed opening: approx. 1,040 x 1,110 mm Bale size: approx. 1,120 x 1,120 x 1,200 mm Bale weight: approx. 500–600 kg, depending on the material Press cycle: approx. 35 seconds Throughput: up to approx. 1,000 kg/h, depending on the material Machine weight: approx. 8,000 kg Machine dimensions: approx. 4,200 x 1,830 x 2,620 mm (L x W x H) The machine is in used, fully functional condition. All information is provided without warranty. Subject to prior sale.

Condition: used, Year of construction: 1994, 1. LIKON 200C Horizontal Baler Machine Technical specifications: Engine power – 22 kW Year of manufacture – 1994 With oil cooler Horizontal tying x 4 times Pressing force – 30 t Overall dimensions of the baler: 10,000 x 2,000 x 2,750 mm Gedpfx Aez Eg Hcop Dsbu Press weight: 10 t Loading opening dimensions: 1,400 x 700 mm Bundle dimensions – 700 x 1,100 x 1,000-1,200 mm, variable length With hydraulic oil No tying wire It was used in a printing shop without a conveyor belt, only with dry-shredded printing waste! Itsbqk Tew S Hpzoymxsp Operating hours – 62,639 The baler is in good condition and ready for operation. PRICE ON REQUEST! 2. Horizontal Baler BAUER 300 The baler is in good working condition (previously used in a printing house)! Technical specifications: Installation for a secondary raw material baler Manufacturer: BAUER Model: 300 Year of manufacture: 1994 Power: 22 kW Pressing force: 40-50 t The dimensions of the baler are 10,300 x 2,000 x 3,000 mm Tipping weight: ~ 400 kg PRICE AND PHOTOS AVAILABLE ON REQUEST!