Used Barsso Frozen Blocks Flaker (Shredder), Fr 100 for sale (29,237)

Condition: used, CTS Type: TSS-70/130 Water-cooled cooling unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The device is used for performing temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material tests Aging tests Electronics and component tests Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/130 Test volume: 130 liters Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K in time ±2 K spatially Temperature change rate: max. 100 K/min on average for shock test tests without heat input Temperature adjustment rate: ≤ 15 min in the range of -65°C to +200°C with 10 kg of ICs Cycle time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A On-site protection: 32 A slow-blow fuse Connection: Cekon 32 Refrigeration system: Refrigerant: R404A / R23 water-cooled, low-noise, fully hermetic Equipment / Features: CTS control panel Microprocessor-controlled control and monitoring system Program operation up to 100 test programs possible digital setpoint and actual value display RS232 interface 2 free switching channels for on-site control of the test specimen Fault message on potential-free contact Load up to 30 V DC, 2 A EMC tested Technical design: Hot and cold chamber Mobile frame with lifting spindle drive Test chamber / mobile frame made of stainless steel, material no. 1.4301 Insert basket made of stainless steel wire Pipe passage NW 50 with sealing plug Compressed air connection 1/4" AG Condensate drain non-pressurized R 1/2" internal thread Safety door lock lockable door with window Dimensions according to installation diagram: External dimensions approx.: 2335 x 940 x 1820 mm Loading dimension approx.: 1990 x 940 x 1652 mm Test chamber dimensions: height approx. 410 mm Width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Other data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see pictures Nedpey Hkd Hsfx Airolh (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, machine/vehicle number: #14195, Rotor diameter: 457 mm Rotor width: 1500 mm Number of rotor blades: 102 Number of stator blades: 2 Nlodpfxsz Svcbe Aireh Inlet cross-section: approx. 1500 x 1500 mm Drive motor: 75 kW

Condition: used, Year of manufacture: 2013 Colour: Grey Price: On request - Year: 2013 - Documentation available: No - CE certificate present: No - Main motor power [kW]: 30 - Rotor width [mm]: 2500 - Number of shafts [pcs.]: 1 - Opening width [mm]: 3000 Nlodpfx Aiowz Nxxsrsh - Opening length [mm]: 1400 - Number of rotating knives [pcs.]: 0 - Number of fixed knives [pcs.]: 100 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1997, operating hours: 13,410 h, load capacity: 1,600 kg, lifting height: 4,310 mm, free lift: 1,405 mm, fuel type: electric, mast type: triplex, battery capacity: 1,000 Ah, battery voltage: 24 V, fork carriage width: 1,000 mm, fork length: 1,100 mm, overall weight: 3,000 kg, total height: 2,000 mm, total length: 3,000 mm, total width: 1,050 mm, No. 04537 Electric front forklift Steinbock Boss LE 16-100 MK V A-1 Used, year of manufacture 1997 Approx. 13,410 operating hours Rated load capacity 1600 kg at a 500 mm load center distance Triplex lift mast Lifting height 4310 mm Free lift 1405 mm Hydraulic mast tilt Fork length 1100 mm Fork carriage width approx. 1000 mm Fork adjustment manually adjustable Superelastic tires (SE) Power steering Electric drive, infinitely adjustable Direction switch on the steering column Driver protection roof Driver's seat with seat belt Rearview mirror Headlights Emergency stop switch Battery data according to nameplate: 24 V / 1000 Ah Including automatic charger miditron B, 24 V / 200 A Vehicle length without forks approx. 1800 mm Transport dimensions approx. 3000 x 1050 x 2000 mm LWH Nedpoz S U S Usfx Airslh Weight approx. 3000 kg To avoid any possible misunderstandings, an on-site inspection is possible and recommended after prior appointment Sale is made in the current condition Technical data, condition description, year of manufacture and scope of delivery according to the manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, all warranties are excluded; the condition "sold as seen" applies Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex warehouse

Condition: used, Shredder Dreher S20/20 No.:K2740 Funnel opening: 310mm x 340mm Motor: Nlsdpfx Aiewh I Uxeroh 3kW 6.3 Amps 380 Voltage - Documentation available: No - CE certificate present: No - Main motor power [kW]: 3 - Opening width [mm]: 310 - Opening length [mm]: 340 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Universal water temperature control unit with electric heating and connections for external cooling. Pressurized water temperature control unit, circulating process temperature control, heater, cooler, electric heating. SINGLE type STW 180/1-36-100-S Mfg. No.: 130568 Year of manufacture: 2013 Temperature max. 180°C Temperature range +20°C to 180°C Operating overpressure max. 6 bar Pump capacity 100 l/min. Tank volume approx. 22 liters (internal volume) Nsdpfx Aisz N H D Derelh Heating capacity 36 kW - direct injection cooling Pump motor power 1.1 kW Heat transfer medium water Circulating water supply + return DN 32 - G 1 1/4" Cooling water supply DN 20 G 3/4" Cooling water return DN 20 G 3/4" Connection power 41 kVA Rated current 57 A Control system SC Standard type R8200-S-1-SI1-0-6 Mains connection 400 Volt, 50 Hz. - Temperature control - An external cooling unit or an external cooling circuit is required for cooling (cooling is achieved through direct injection of cooling water into the cooling medium without a heat exchanger). - mobile on 4 rollers - Supplied without connection cable Dimensions L x W x H 1300 x 370 x 1150 mm Weight 200 kg Good condition

Condition: good (used), fuel type: diesel, color: white, Year of manufacture: 2017 Operating hours: 2.560 Lifting capacity: 550 kg CE mark: yes Nodsx I Rbnepfx Airelh Technical condition: good Visual appearance: good Delivery terms: EXW Production country: NL Please contact Vink Machinery for more information Knikmops 100 * 2017 * Diesel * 2560 working hours * 2 meter lifting height * 550 kg lifting capacity * Hydro quick change * extra functions * including Dutch registration

Condition: good (used), Year of construction: 2000, High-performance CNC vertical machining center with SIEMENS 840 D, dual pallet changer, internal coolant system, linear guides, and 30-tool automatic tool changer. Nledpsd I R E Nsfx Airoh Table size: 2 x 1000 x 450 mm Tool holder DIN 69871: ISO 40 Travel ranges: X-axis: 1100 mm Y-axis: 500 mm Z-axis: 640 mm Spindle speed range: 50 – 10,000 rpm Table load: 600 kg Feed rate range, X/Y/Z, stepless: -10,000 mm/min Rapid traverse in all axes: 30 m/min Drive power: 18.5 kW Machine dimensions L x W x H: approx. 3605 x 3041 x 3220 mm Weight: approx. 6700 kg Accessories / Special features: • CNC control system SIEMENS 840 D • Dual pallet changer • 30-tool automatic tool changer • Full enclosure with safety doors, electrically secured • High spindle speed up to 10,000 rpm and drive power of 18.5 kW • Linear guides with double roller recirculating bearing, allowing high torques to be absorbed evenly in all directions • Ball screws in all 3 axes • The entire machine bed is made of Meehanite cast iron, ensuring precision, rigidity, and vibration damping • Tool holder DIN 69871, ISO 40 • Chip conveyor with integrated coolant system • 4th axis pre-configured • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: new, GMN TSE 100cg-6000 / 1.25 high-speed spindle, serial number: R358699, unused, 100% functional, scope of supply as shown in the photos. Nedpfx Aoi D U U Teirelh

Condition: new, GMN TSE 100cg-6000 / 125 high-speed spindle, serial number: R358399, unused, in open original packaging, 100% functional, scope of delivery as shown in the photos. Nedei Eaabopfx Airelh

Condition: ready for operation (used), Indramat KDS 1.1-100-300-W1 AC servo controller, serial number as shown in the photo, used, professionally and completely refurbished and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Nsdei Ebhhspfx Airjlh

Condition: ready for operation (used), Indramat KDS 1.3-100-300-W1 controller, serial number: 253759-02028, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Njdpfx Aji Ebibjirslh

Condition: ready for operation (used), Indramat KDV 1.3-100-220/300-W1 power supply, serial number SN23226473930903, professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photo. Nljdpfx Aiji Ebi Asroh

Condition: new, Indramat KDV 2.2-100-220 / 300-W1 power supply, serial number: 234691-00754 A08R1, unused, in open original packaging, 100% functional. Scope of delivery as shown in the photos. Nljdpfx Aoi Ebi Rsirjh

Condition: ready for operation (used), Brinkmann TC 25 / 810+100 submersible pump, serial number: 0313002815-19535001, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Nsdei D Hmhepfx Airjlh

Condition: new, Baumüller DSG 100-K servo motor, serial number: 20521958 + DG 66 ANC encoder + DGS 67 A5B encoder, unused with signs of storage, 100% functional, scope of delivery as shown in the photos. Nledpfx Aiei D E Dvoroh

Condition: excellent (used), Year of construction: 2004, operating hours: 10,500 h, functionality: fully functional, power: 300 kW (407.89 HP), Wood chipping system BRUKS BK-RH485 – Year of manufacture 2004 Nlodpfxsz Tzrkj Airoh For sale is a powerful wood chipping system, BRUKS BK-RH485, ideal for the industrial production of wood chips. The system is in good working order and has been regularly maintained. Technical data Model: BRUKS BK-RH485 Max. log diameter: 485 mm Min. infeed length: 1,500 mm Max. infeed length: 5,500 mm Rotor disk drive power: 315 kW Wood chip length: approx. 25 mm Capacity: 80–100 m³/h Operating hours: approx. 12,500 Year of manufacture / Commissioning: 2004 System no.: H4224653 Equipment & Components Step feeder Infeed belt Metal separator / metal detector 2x discharge augers (BRUKS): 600 × 6,500 mm 800 × 9,500 mm Control cabinet / control units Description The BRUKS BK-RH485 is designed for high throughput and heavy-duty industrial applications. Thanks to its robust construction and powerful drive technology, it is ideally suited for the production of homogeneous wood chips. The integrated metal separation and reliable feeding technology ensure safe and efficient operation.

Condition: ready for operation (used), Indramat KDV 2.2-100-220/300-220 power supply, serial number as shown in the photo, professionally and completely refurbished and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Nledpfxji Ebi Uj Airsh

Condition: used, Manufacturer: Gendron Type: RU 28-100 Max. grinding length: 1000mm Max. grinding diameter: 280mm Center-height: 155mm Table: 1660x150mm Grinding wheel: 300mm Machine-dimensions: 2700x1550x1500mm Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Njdpfx Aiewnhkmerelh

Condition: used, Catalog number: 7536 – Made in Germany – Engine not included – Used wood chipper Nedpfozwwy Hjx Airelh TECHNICAL DATA Inlet width: 530 mm Number of blades: 2 pcs Shaft diameter: 580 mm Inlet width: 420 mm Inlet height: 200 mm Net price: 30,000 PLN Net price: 6,977 EUR, depending on the exchange rate of 4.3 EUR (Prices are subject to change due to fluctuations in the exchange rate)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, displacement volume: 144 cm³, injection pressure: 2,000 bar, injection weight: 132 g, mold height (min.): 350 mm, ejector stroke: 150 mm, Clamping force: 110t Year of manufacture: 2017 Injection shot weight: 132g Injection unit 290 + 100 (2K) Screw diameter: 35 mm Specific injection pressure: 2000 bar Injection volume: 144 ccm Injection shot weight: 132 g Mold clamping unit 1100 Clamping force: 110 t Distance between tie bars: 470 x 470 mm Mold height: 350 mm Opening stroke: 450 mm Ejector stroke: 150 mm Control: Selogica direct Nlodpez Ef N Aofx Aireh Two-component injection molding machine with a KUKA robot Equipment: - Only ABS and PP were processed - 2nd injection unit EUROMAP 100 vertical (injection into the parting line) - Selogica direct control with a 15" touchscreen - Hydraulics with accumulator (100 l pressure accumulator), injection during mold closing - Control of a hydraulic rotary unit + 3 core pulls - Hydraulic ejector, blow unit - 6 heating circuits for the mold/hot runner - 6-circuit water distribution manifold for cooling - Min. mold height 350 mm, tie bar extension 100 mm, machine raised by 100 mm - KUKA KR6 robot (operated via Selogica) with enclosure

Condition: used, Haffner SL100 door lock milling machine for simultaneously: Milling out the lock case using a chain cutter Milling out the lock faceplate using a faceplate cutter Drilling out the handle and keyhole using a drill bit. Technical data: - Chain cutter motor: 1.7 kW Nsdpfxoztvw Ns Airslh - Rebating cutter motor: 0.6 kW - Drill motor: 0.25 kW - Blade length: 150 mm - Chain width: 12–17 mm

Condition: new, STRUERS Grinding and Polishing System Struers LaboPol-30 with LaboForce-100 and LaboDoser-100 Laboratory grinding and polishing system with extensive accessories For sale is an unused, unassembled grinding and polishing system from the manufacturer Struers. The LaboSystem is suitable for reliable and fast manual or semi-automatic grinding and polishing of samples in the laboratory and in production. Technical data: Manufacturer: Struers Type: LaboPol-30 Article number: Type of equipment: Grinding and polishing machine Power connection: 200–240 V / 50–60 Hz Automatic sample mover: Struers LaboForce-100 Article number: Power supply: 1 × 24 V DC Dosing unit: Struers LaboDoser-100 Article number: Version for square bottles Grinding and polishing disc: MD-Disc with conical mount Diameter: 300 mm Article number: Sample holder plate: Specimen Mover Plate 6 × 40 mm Article number: Equipment: LaboPol-30 grinding and polishing machine LaboForce-100 sample mover LaboDoser-100 dosing unit MD-Disc carrier disc, 300 mm Specimen Mover Plate, 6 × 40 mm Coupling for sample holder plate Glass desiccator, 250 mm, according to parts list Bottle set Service kit LaboPol-30 MD-Concert storage box Areas of application: Material testing Metallography Sample preparation Grinding and polishing Laboratory applications Quality assurance Research and development Industrial material testing Scope of supply: 1 × Struers LaboPol-30 – Art. No. 1 × Struers LaboForce-100 – Art. No. 1 × MD-Disc, 300 mm – Art. No. 1 × Specimen Mover Plate, 6 × 40 mm – Art. No. 1 × Coupling for sample holder plate – Art. No. 1 × Struers LaboDoser-100 – Art. No. 1 × Glass desiccator, 250 mm – Art. No. DE-720405 1 × Bottle set – Art. No. 1 × Service kit LaboPol-30 – Art. No. 16332999 1 × MD-Concert storage box – Art. No. Condition: New / unused Equipment has not yet been assembled or put into operation Main equipment in original transport packaging Optical condition and accessories as shown in the pictures The system has not yet been assembled and is in storage. Assembly and commissioning are not part of this offer and must be organized independently by the buyer. Nlsdpfx Aijz Srm Njreh The image of the fully assembled system is an EXAMPLE IMAGE. The original photos show the actual delivery condition. The workbench shown and other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: good (used), Year of construction: 2008, Used 3-meter E Brake by Safan Type: E Brake 100 3100 TS1 Capacity: 3100 x 100 tons Y1, Y2, X, R, Z1, and Z2 CNC controlled Wila hydraulic top clamp Adjustable crowning Nljdps Aazxiofx Airjh Year of manufacture: 2008

Condition: new, Compressor AIRCRAFT Airprofi 703/100 – used – Galvanised tank, incl. pressure regulator, Year of manufacture 2018, unused, SPECIAL PRICE instead of promo price 1,699,-- ----- Technical Data ----- Tank capacity: 100 litres, Max. air displacement: 650 litres, Max. pressure: 10 bar, Nljdpfx Aie Aaz Tmjroh Motor: 4 kW, Speed: 950 rpm, Sound pressure level: 93 dB - new demonstration unit -