Used Batch Of Bearings for sale (7,294)

Condition: used, functionality: fully functional, Year of construction: 2008, machine/vehicle number: HEB IPE section bending roll, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, shaft diameter: 200 mm, roller diameter: 650 mm, bending radius (max.): 1,000 mm, pipe diameter (max.): 250 mm, overall weight: 27,000 kg, input voltage: 3,80,440 V, input frequency: 5,060 Hz, Equipment: CE marking, documentation/manual, emergency stop, hardened rollers, Profile bending roll hydraulic model AR200, year 2008 make MG Italy Capacity bending chart and photos in enclosed -Technical data: Output shafts size 200 mm -Machine complete with set of rollers adjustable for the various shape of profiles. -Traction tool hydraulic operated for the HEB-beam - IPE - UNP bending the hard side. -Lateral correctors left and right side hydraulic operated in 3 direction. Iodpfxjz Dkr Hs Ahneig -Included additional set of rolls for pipe 6" inches -Machine with 3 rolls driven system with individual hydraulic motor and axial gear-unit on each shaft. -The 3 shafts working on bearings, heavy duty type with sealed lubrication. -Centralized control panel movable on wheels with all electric commands. -Dual rolling speed up to 5 mtr/min with automatic balancing system between the 3 rolls. -Safety devices in compliance with European regulation. CE mark. -electric 30 Kw on the hydraulic power unit- voltage 380/50 -Digital position readout on the bending rolls -Manuals and schematics all available along with the machine. -Machine delivered in working condition. CAPACITY CHART IN ENCLOSED MG MODEL AR200 SECTION BENDING ROLL

Condition: good (used), Year of construction: 1987, functionality: fully functional, overall weight: 1,900 kg, total length: 1,690 mm, total width: 1,260 mm, total height: 815 mm, gear ratio: 200, torque: 65,000 Nm, shaft diameter: 200 mm, 2 units of 4-stage industrial gearboxes used in winch applications. Manufacturer: Asug Penig, GDR Type: TGL 34611/10A8-450x200 Year of manufacture: 1987 Maximum torque: 65000 Nm Gear ratio: 200:1 Actual gear ratio: 200.364 Power: n1 950 rpm = 33 kW Iijdpfxezw H His Ahnjg n1 710 rpm = 24.6 kW Dimensions: Shaft d1: Ø 45 mm x 110 mm Shaft d2: Ø 200 mm x 350 mm Shaft height h1: 400 mm Length: 1690 mm Width without shafts: 560 mm Width with 2x shafts: 1260 mm Height: 815 mm Weight without oil: 1900 kg (For design A8, the weight increases to approximately 2000 kg) Oil capacity: 68 kg The TGL 34611 series of gearboxes for conveyor systems and hoisting equipment includes three- and four-stage gearboxes with hardened gears. The shafts are mounted in roller bearings. Splash lubrication is used. Spur gears and shafts are positively connected by means of keyways. The external dimensions of the housing for a given size are the same for both the three- and four-stage versions. In the four-stage version, the drive shaft is located below the plane of the components. The housing is made of cast iron. The gearboxes can be operated in both directions of rotation.

Condition: used, functionality: fully functional, FAG 24056-K-B Spherical Roller Bearings – Refurbished / Excellent Condition – 2 pcs available Available: 2 FAG spherical roller bearings, model 24056-K-B, disassembled from an industrial plant and in full operational efficiency. High-end components, engineered for heavy-duty applications, ideal as immediate replacement parts or to reduce downtime. Technical Specifications Isdpfeyu Rh Tex Ahneig Brand: FAG Model: 24056-K-B Type: spherical roller bearings Tapered bore (K) High radial and axial load capacity Suitable for: industrial gearboxes lifting equipment heavy machinery quarries, cement plants, steel mills snowmaking systems / industrial pumps Condition Used, but in perfect working condition Removed from operating equipment No signs of damage on raceways and rollers Excellent running smoothness Properly stored in crate Ready for reinstallation

Condition: like new (used), MOULDER INFEED IF-100 MAX FEED SPEED 100M/MIN MAX LENGTH 6100MM MIN LENGTH 1500MM FLAT CHAIN CROSS FEED WITH 5 CHAINS INVERTER DRIVE ACCELERATOR 5KW MAX WIDTH 250MM Iedpfxjy D Akms Ahnjig MIN WIDTH 50MM MAX THICKNESS 100MM MINIMUM THICKNESS 12MM 4X FEED ROLLERS 180MM MOULDER OUTFEED OF-100 DROP LEAF OUTFEED CAPABLE OF HANDLING ALL SIZES AS PER IF-100 INFEED CROSS FEED TABLE WITH 7X BELTS SUITABLE FOR UP TO 100M/MIN AVAILABLE EX STOCK PRICE INCLUDES INFEED AND OUTFEED POSSIBLE TO OFFER SUITABLE MOULDER AS NEEDED, WEINIG OR LEADERMAC !!!

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 506925, functionality: fully functional, operating hours: 261 h, power: 5.5 kW (7.48 HP), planing width: 630 mm, tool diameter: 125 mm, number of blades: 4, rotational speed (max.): 5,000 rpm, overall weight: 1,260 kg, Offering a used MARTIN thickness planer, model T45. Sale due to restructuring of the company. General Technical Specifications: Planing width: 630 mm Maximum planing depth: 12 mm Planing height: 2.8 - 300 mm Minimum workpiece length: 270 mm Weight: approx. 1,200 kg Table length: 1260 mm Speed: 5000 rpm Thickness table extension 630 x 450 mm, foldable Year of manufacture: 2011 5.5 kW (7.5 hp); maximum planing width 630 mm The machine provides first-class results in planing operations. Operation: 1-axis control for planing dimensions, maximum 99 values can be stored, Button for manual quick and fine adjustment of the planing thickness according to the digital display, Push buttons for starting and stopping the cutterhead, Cutterhead: TERSA full-steel cutterhead Z4 D=125 mm; including locking mechanism for easy cutter replacement Groove for accommodating planing cutters. Thickness table: Electric thickness table adjustment with fine adjustment, feed rate 10 mm/s, Iiodpfx Ajzwpvaehnsg mounted on 4 support spindles, preventing tipping, table surface finely planed. Feed: 2 speeds, 6 / 12 m/min, electrically selectable even during planing, large rubber feed rollers D=85 mm to compensate for varying wood thicknesses, rubber rollers are material-friendly and self-cleaning, easy roller replacement; articulated pressure bar at the infeed. Extraction: High-swiveling, split hood with chip extraction connection D=160 mm, Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterhead via grease nipples. The machine is still connected and can be tested. Price is quoted plus VAT.

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 3,700 kg, type of input current: three-phase, Equipment: documentation/manual, For sale: BERNARDO URS 1000 N universal cylindrical grinding machine, year of manufacture 2021. The machine is virtually new and has only been used a few times. It was originally purchased as part of an expansion of our machining capabilities. Following a change in the company's business profile, the machine was not put into regular production. The sale is therefore not related to any technical fault or machine failure. The machine is in excellent condition with minimal signs of use. It is designed for precision external cylindrical grinding as well as internal grinding. With a distance between centres of 1000 mm and a grinding diameter of up to 320 mm, it is suitable for toolrooms, machining companies, shaft production and refurbishment, machine-part manufacturing and small-batch production. Direct sale by the machine owner – SAWA Electronic, Poland. Iiodpfx Aozz Nbwjhneg Main technical data: year of manufacture: 2021 distance between centres: 1000 mm centre height: 180 mm external grinding diameter: 8–320 mm maximum workpiece weight: 150 kg internal grinding diameter: 30/35–100 mm maximum internal grinding depth: 125 mm workhead spindle speed: 25–220 rpm grinding wheel: 400 × 50 × 203 mm grinding spindle speed: 1670 rpm internal grinding spindle speed: 10,000 rpm grinding head swivel range: ±30° hydraulic table feed digital position readout power supply: 400 V machine weight: approx. 3700 kg overall dimensions: approx. 3700 × 1900 × 1500 mm Equipment includes: internal grinding attachment 3-jaw chuck Ø200 mm steady rests coolant system digital readout grinding wheel dressing device grinding wheel balancing equipment Price: PLN 75,000 net + VAT Price: EUR 17,500 net + VAT Machine location: Regimin, Mazowieckie, Poland. Inspection and machine demonstration possible by prior arrangement.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, 2 x Videojet Laser Marking Systems for date/batch coding and marking with 1 x AD Oracle laser fume extraction system. Date of manufacture - 2019. The marking of the product surface is performed by the effect of intense laser radiation on the product material. The laser beam is focussed onto the product surface and heats up the topmost layer of the material, which causes a color change or a vaporization of the topmost dye layer. Iijdezyu Igspfx Ahneg Laser Marking System model – 3340 IP54 LASER MARKING SYSTEM. Laser Marking System serial numbers - V1098/498 and V1908/499. Laser Marking System electrical requirements - 100-240 V / 50-60 hz / 1 phase. Fume extraction system model - AD Oracle. Fume extraction system serial number - 50067797003. Fume extraction system electrical requirements - 115-230 V / 50-60 hz - 1 phase.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, travel distance X-axis: 1,350 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 39 m/min, feed rate Y-axis: 39 m/min, feed rate Z-axis: 39 m/min, workpiece weight (max.): 2,500 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 35 W, number of spindles: 1, number of slots in tool magazine: 50, Equipment: chip conveyor, documentation/manual, We offer this Hurco BX50i vertical machining center in very good condition, manufactured in 2020. It was first put into service in 2021. Model: BX50i Work table surface 1500 x 960 mm T-slots 6 x 22 mm Maximum permissible uniformly distributed loads 2500 kg Door opening Iodpfjzzlu Tjx Ahnoig 1100 mm Distance between the 2 columns 1060 mm Distance from spindle nose to table min/max 180/780 mm Spindle speed: 0 – 18000 rpm Hybrid spindle bearings Bearing lubrication: Grease/air Spindle taper: HSK63 FORM A Peak power (for 1 min) Continuous 47 HP - 35 kW at 2800 rpm 33.5 - 25 kW at 2800 rpm Maximum speed: 18,000 rpm Number of tools: 50 Center spindle coolant: 40 bar KNOLL paper filtration If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: like new (used), Year of construction: 2009, functionality: fully functional, operating hours: 4,000 h, input voltage: 380 V, input current: 80 A, input frequency: 50 Hz, type of input current: DC, pressing force: 160 t, stroke length: 150 mm, operating speed: 50 mm/s, reverse speed: 10 mm/s, table width: 1,300 mm, table length: 2,500 mm, table height: 150 mm, throat depth: 1,300 mm, ram plate width: 1,300 mm, ram plate length: 2,500 mm, distance table to ram: 200 mm, clearance between the columns: 2,500 mm, retraction force: 100 t, oil tank capacity: 50 l, total length: 3,500 mm, total width: 4,500 mm, total height: 2,300 mm, overall weight: 6,000 kg, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, We offer this Dimter Profitest 2500 gluing press in like-new condition, manufactured in 2009. Iiedpfx Aezin Aiehnjg Manufacturer: Dimter Model: Profitest 2500 Year of manufacture: 2009 Condition: like new Type: gluing press If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: like new (used), Year of construction: 2023, operating hours: 400 h, functionality: fully functional, machine/vehicle number: 2022LW160, High-speed roll forming line, equipped with tooling for the production of GELAN and SCHUCO metal profiles used in PVC window frame manufacturing. Machine achieves speeds up to 55 m/min with 6 m profile length production. Maximum processable material thickness is 2.5 mm. Upper and lower shaft diameter is 60 mm, the width between the stands is 360 mm, and each station is driven by an individual gearbox with two cardan shafts. Both upper and lower shafts are driven at each station. The line features 15 forming stands plus two straightening stands (Turkish heads). All forming rollers have a surface hardness of 62 HRC. Additionally, all auxiliary rollers and shafts in contact with the material are induction-hardened to 58–62 HRC (including run-out table rollers and horizontal accumulator rollers). A flying cut servo positioning system (DELTA 7.5 kW servo motor, ball screw, and linear guides) facilitates precise length adjustments via HMI. Hydraulic cutting system included. The run-out table features an automatic profile kickout, conveying, and separation system for continuous production without stopping. The horizontal entry accumulator for strip material ensures uninterrupted production, equipped with pinch rollers and individual drives. Double-sided hydraulic decoiler included. Iijdpsyw Rzajfx Ahnog The line is equipped with a continuous ink-jet marking system from KONING (Germany). The automatic stacking system is not installed (see photos). The machine features recirculating cooling and lubrication across all 15 stations. Electronics: SIEMENS (PLC, contactors), SCHNEIDER (contactors), DELTA (Taiwan drives and servo). Main electric motors by Siemens. Bearings by SKF. The mechanical frame is stress-relieved and milled for precision. The machine has only been used for test production, having processed just 250,000 m of material (machine is nearly new). It is installed and connected to power; test runs can be arranged on-site. The listed price refers to the machine disassembled and loaded onto a truck. Included is comprehensive documentation with detailed tooling setup instructions for each profile (including detailed assembly drawings of rollers). Model: LW160 Supply voltage: 380 V Installed power: 73.5 kW (consumes only 40% of power when processing 2 mm strip) Frequency: 50 Hz Weight: 16,500 kg Current: 160 A Serial number: 2022LW160 Year of production: 2022 Year of on-site assembly: 2023

Condition: used, Year of construction: 2015, functionality: fully functional, power: 38 kW (51.67 HP), • Year of manufacture: 2015 Iodpfszl Stwox Ahneig • Max. log diameter: 1.5 m • Automatic, hydraulic belt tensioning • Automatic pre-cutter • Automatic board guiding system • Max. log length: 8 m • 8 hydraulic clamps • 3 log turning devices with left-right positioning • Automatic control • Automatic lifting belt conveyor for boards • Dust extraction system • 38 kW motor • Price: 35,000 euros

Condition: excellent (used), mileage: 7,23,000 km, power: 353 kW (479.95 HP), first registration: 06/2007, fuel type: diesel, tire size: 385/65 R 22.5, axle configuration: 6x2, wheelbase: 4,100 mm, fuel: diesel, fuel tank capacity: 750 l, brakes: retarder, color: brown, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 12, emission class: euro4, suspension: steel-air, number of beds: 2, permissible axle load (axle 2): 7,500 kg, Year of construction: 2007, Equipment: ABS, Bluetooth, air conditioning, cruise control, differential lock, electric window regulation, fog lights, fridge, parking heater, power mirror, retarder, traction control, = Additional options and accessories = - Air Horn - Air Suspension - Beacon(s) - Disc brakes - Handlebar adjustable in height - High Beams - Lift Axle - Radio CD player - Sper - Stability Control - Super Single Tires - Work lamp(s) Iijdpfsz A T E Tsx Ahnjg = More information = General information Cab: Topline, one and a half Registration number: BS-XX-76 Technical information Number of cylinders: 6 Engine capacity: 11.705 cc Drivetrain Make of engine: Scania Axle configuration Brakes: disc brakes Front axle: Tyre size: 385/65 R 22.5; Steering; Suspension: leaf suspension Rear axle 1: Tyre size: 295/80 R22.5; Lift axle; Max. axle load: 7500 kg; Steering; Suspension: air suspension Rear axle 2: Tyre size: 295/80 R22.5; Double wheels; Differential lock; Steering; Suspension: leaf suspension Weights Empty weight: 8.500 kg Carrying capacity: 17.600 kg GVW: 26.100 kg Max. towing weight: 50.000 kg Interior Number of seats: 2 Condition Technical condition: very good Visual appearance: very good Number of keys: 2 = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,020 mm, controller model: Pro 5, table load: 1,200 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,900 h, coolant supply: 40 bar, spindle nose: HSK100, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, Very well-maintained machine with a low number of operating hours. The machine was purchased and installed in 2013. IKZ 40 bar and air. Tool center point control, tilted workplane, Die & mold package, extended memory, extra zero points. Lots of accessories, pallets, cubes, vises, HSK holder, shrink holder. Ca. 125 pices. Zoller for tool measurements. Iodpfx Ajzw Efkjhnsig

Condition: new, functionality: fully functional, power: 205 kW (278.72 HP), gearing type: automatic, fuel type: hybrid, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, CONSTMACH MOBILE 120 mobile concrete batching plant offers a fast, efficient, and portable solution for high-capacity concrete production needs. This plant, built on two separate mobile chassis, has an aggregate bunker and weighing system on one chassis and a transfer conveyor and mixing group on the other. This design minimizes assembly time while ensuring maximum efficiency in the production process. MOBIL 120 requires minimal site preparation and can be easily installed on a flat surface with high load-bearing capacity. The 3 m3 capacity twin-shaft mixer used in this model ensures high homogeneity of concrete. The system, which does not have an internal cement silo, can be integrated with external silos with capacities ranging from 75 tons to 500 tons. Furthermore, the integrated blasting bunker for bagged cement makes the filling process into silos extremely practical. The aggregate pre-feeding system eliminates the need for a feeding ramp, speeding up the loading process. The automation system, equipped with high-end SIEMENS and SCHNEIDER brand electrical components, precisely controls all plant operations with user-friendly PLC software. . Mobile 120 - Mobile Concrete Mixing Plant Technical Specifications Production Capacity: 120 m³/hour Transport Position Dimensions: 1. Chassis 15.5x3x4.3 m / 2. Chassis 14x3x3.9 m Weight: 58 tons Total Motor Power: 205 kW Required Electric Generator: 300 kVA Mixer Type: Twin-Shaft Mixer Working Area: 500 m² Aggregate Storage Bunker: 4 x 25 m³ Aggregate Weighing Bunker: 4.5 m³ Aggregate Transfer Belt: 1,000 x 15,200 mm Mixer Wet Concrete Volume: 3 m³ Cement Weighing Bunker: 1,800 kg Water Weighing Bunker: 1,000 liters Additive Weighing Bunker: 100 liters Air Compressor: 500 liters, 7.5 kW Cement Silo: 50 – 500 tons Control Type: Fully Automatic Why Choose the Mobil 120 Mobile Concrete Mixing Plant? Ijdpfxsxp U Urs Ahnsig CONSTMACH MOBIL 120 offers maximum performance on construction sites with its high production capacity, short setup time, and portability. The powerful mixer system ensures a homogeneous mixture, while advanced automation technology keeps the production process fully under control. Its design, compliant with international shipping standards, guarantees easy transportability. Its durable structure offers long-term use while reducing operating costs with its energy efficiency. CONSTMACH MOBIL 120 is the right choice for professionals seeking quality, reliability, and mobility in concrete production. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: good (used), Year of construction: 2006, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Isdpjz Digpjfx Ahnoig Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Condition: used, Year of construction: 2017, Roll production line, dough band system, Lippelt Rustica Round 220 - Softrounder Year of manufacture: 2017 Condition: used, fully functional Iiedpfjz A Ry Usx Ahnog Approx. 5530 operating hours Rustica with Softrounder – the all-rounder for processing square and round-shaped wheat rolls With punching station and cutting guillotine – for individual and unique rolls Processes all types of dough, cuts all sizes, stamps patterns into your rolls, or cuts out triangles Ideal for producing rose rolls with fat application 1 to 6-row operation Discharge device for baking trays with a maximum size of 670 x 1000 mm With transverse belt, retractable for the discharge device for further processing Transverse belt with pressure roller and shaping board With seed station (water bath and seed rotating disc), type: Rumo 6 for double-sided seeding Touchscreen control with recipe memory Dough band width 220 mm Includes 2 punching dies (Veronese 5-row and double oblique cut) Includes shaping cups for 40-80g (5-row) and 80-120g (3-row)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 03353, PROBAT UG22 – classic professional coffee roaster – fully refurbished in 2003 For sale: original PROBAT UG22, a classic professional drum coffee roaster from Probat’s legendary UG series. This machine has a nominal capacity of approximately 22 kg of green coffee per batch and features the characteristic classic Probat design. The roaster was fully refurbished in 2003 and is equipped with an original HEEMAF S.K.A. electric motor, type NK 15-4, 1.1 kW, 1420 rpm, 50 Hz. Price: make an offer Technical specifications Brand: PROBAT Model: UG22 Serial number: 03353 Capacity: approx. 22 kg per batch Type: classic drum coffee roaster Heating: gas Electric motor: HEEMAF S.K.A. NK 15-4 Motor power: 1.1 kW Motor speed: 1420 rpm Motor power supply: 50 Hz Fully refurbished in 2003 Equipped with an original Schuilenburg identification plate A special example from the classic Probat UG series, suitable for further professional use, restoration/use in an artisanal coffee roasting facility, or as a valuable addition to a collection. Iiedpfxoz Dih Tj Ahnsg Serial number: 03353

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 06220420, functionality: fully functional, operating hours: 100 h, power: 7 kW (9.52 HP), input voltage: 380 V, input frequency: 50 Hz, cutting width (max.): 460 mm, control type: NC control, actuation type: hydraulic, rotational speed (max.): 80 rpm, rotational speed (min.): 20 rpm, total height: 1,900 mm, total length: 2,820 mm, total width: 2,200 mm, overall weight: 2,300 kg, Equipment: documentation/manual, Double-column structure, with a round-section main sliding column and a rectangular-section secondary column. CNC with touch-screen for programming the head lift, clamping, and piece feeding, inverter-controlled blade speed adjustment, and a feed repeater settable from 1 to 9 times. Blade descent controlled by a probe, workpiece Iisdoyvh Nxspfx Ahneg feed roller conveyor. Carbide blade guides and bearings, hydraulically locking clamps, auger chip conveyor, coolant system, lighting system, motorized blade cleaning brush, hydraulically adjustable belt tension. Operation and maintenance manual. With Extra 2m roller table 1pc (500mm width) NO CE mark, NO CE declaration of conformity

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Clearance height Operator terminal: 24" LED colour display Handheld terminal for axis speed control Software: "Woodflash Vacuum pump 90 m³/h/50 Hz or 108 m³/h/60 Hz Milling spindle 12 kW HSK F63 (12,000 rpm) 12-position linear tool changer on the left of the machine frame + pickup station Drilling head DH 16 4H 2S: Vertical 12 spindles Horizontal 4 spindles 2 grooving saws Storage location: Nattheim Iodjz A Aw Sepfx Ahnsig

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, turning length: 196 mm, turning diameter over cross slide: 130 mm, spindle speed (min.): 6,000 rpm, bar diameter (max.): 36 mm, overall weight: 1,900 kg, Equipment: documentation/manual, Yamazaki Mazak QT-6T CNC Turning Center – Excellent Condition We offer for sale a well-maintained Yamazaki Mazak QT-6T CNC Turning Center, manufactured in Japan and kept in excellent mechanical and operational condition. The machine is currently under power, in production, and available for inspection and testing upon appointment. Machine Information - Manufacturer: Yamazaki Mazak - Model: Quick Turn QT-6T - Year of Manufacture: 1999 - Serial Number: 39178 - Country of Origin: Japan - CNC Control: Mazatrol - Configuration: 2-Axis CNC Turning Center (X / Z) - Machine Weight: Approx. 1,900 kg Iiodpfxjzal Rao Ahnsg Main Features - 6" Chuck - Collet Chuck - Complete Set of Collets Included - Bar Capacity up to 36 mm - 8-Station Turret - Tool Eye (Automatic Tool Measurement System) - Automatic Parts Catcher - Coolant System - Fully Operational Included Equipment - Fedek Bar Feeder - Bar Feeder Length: 1.5 m - Pneumatic Bar Pushing System - 6" Chuck - Collet Chuck - Complete Set of Collets - Full Set of Tool Holders - Original Manuals and Documentation - Various Accessories Additional Equipment Included The machine is supplied with the complete set of spindle protection plastic tubes (bar guide tubes), allowing safe operation with bar stock and minimizing vibration, noise, and bar whipping during spindle rotation. This contributes significantly to machining stability, surface finish quality, and spindle protection when running long bars. Technical Specifications - Maximum Turning Diameter: Approx. 130 mm - Maximum Turning Length: Approx. 196 mm - Spindle Bore: Approx. 45 mm - Maximum Spindle Speed: Up to 7,000 rpm - Bar Capacity: 32–36 mm - X-Axis Travel: Approx. 80 mm - Z-Axis Travel: Approx. 200 mm - Rapid Traverse X/Z: Up to 30 m/min Condition ✔ Excellent mechanical condition ✔ Regularly maintained ✔ Machine under power ✔ Ready for immediate production ✔ Inspection and test run possible ✔ All manuals and documentation available Additional Information This machine is offered as a complete production package and is ideal for precision machining of bar stock, small and medium batch production, and high-accuracy turning applications. The machine comes with extensive tooling, collets, holders, automatic tool setting, automatic parts catcher, bar feeder, and spindle guide tube system, allowing immediate integration into production with minimal additional investment. Loading assistance is available. Videos of the machine running can be provided upon request.

Year of construction: 2022, condition: used, Dough mixing system, spiral mixer Diosna WH 240 E Premium Hygienic Design Available from mid-January 2026 Components: 2x Diosna WH 240 E spiral mixers with bottom discharge 1x Hopper with star roller dosing system for processing residual dough and conveyor system 1x Tilting lifter HK 300 1x Dough trough with transport / dough handling system 1x Control cabinet Incl. safety fencing Technical data: Iijdsz A Smiepfx Ahnjg Year of manufacture: 2022 Dough capacity: 1,800 kg/h (≥ TA 154, ≤ TA 180) Maximum capacity in dough per batch: 240 kg Maximum capacity in flour per batch: 150 kg Number of batches: 7.50 batches/h Cycle time / auxiliary time: 8 / 1 min Maximum mixing time per mixer: 11 min Charging time into mixer: 4 min PLC control with touch panel and 19" display With frequency converter for dough trough and spiral (speeds adjustable) With temperature sensor Machine cladding glass bead blasted and reduced to a minimum Mixer designed for wet cleaning in the low-pressure range (IP65) System description The specified mixing system consists of two HygienicDesign spiral mixers, a dough trough with a transport device, an automatic scrap dough feeding system including weighing, and a tilting device with a discharging function. The ingredients can be added to the mixing bowl via filling nozzles on the mixer lid. The scrap dough is added via corresponding filling hoppers with pneumatic lids. Manual additions can also be added via these hoppers. The discharge of the dough into the dough trough is carried out via the electrically controlled bowl opening. The DIOSNA HygienicDesign spiral mixer is operated and controlled with a PLC control including a touch panel.

Condition: refurbished (used), 2 pieces 125 mm Ø x 170 mm Ø x 173 mm long 1 piece 140 mm Ø x 190 mm Ø x 173 mm long Isdpfxongz N Io Ahnjig

Condition: used, Year of construction: 2019, functionality: fully functional, operating hours: 1,400 h, power: 113 kW (153.64 HP), input voltage: 400 V, input current: 160 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 400 °C, inner dimension length: 8,040 mm, inner dimension width: 1,020 mm, inner dimension height: 120 mm, total length: 8,890 mm, total width: 2,005 mm, total height: 2,065 mm, number of chambers: 1, number of shelf rows: 3, control type: manual, actuation type: electric, fuel type: electric, Equipment: CE marking, For sale is a used tunnel oven from 2019. This oven runs on electricity. Manufacturer: Southstar, China. Total length (external) including entry section: approx. 8,890 mm Entry length: 850 mm The exit is flush with the oven body. External width: approx. 2,005 mm External height: approx. 1,300 mm Distance between the heating plates and heating elements: approx. 120 mm Entry height between heating plates: approx. 135 mm Iiedpfx Aoyvqt Hehnog Height from the floor to the top edge of the control panel: approx. 2,065 mm Length of heating plates: approx. 1,015 mm Width of individual heating plates: approx. 96 mm Length of heating plates between the M10 screw heads: 965 mm The motor and gearbox are mounted on top to avoid heat exposure. Unused spare parts, including a motor, gearbox, as well as heating plates and heating elements, are included. This oven was in use for only about 9 months. It consists of 3 zones; top and bottom heat can be controlled separately in each zone. Previously used for pizza production but is suitable for other products as well. The oven served as a backup unit, so this is not a distress sale, but price negotiations are possible. Viewing and test runs can be arranged on site in 32052 Herford. Collection only from Herford. No guarantee or warranty.

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 380 V, cutting height (max.): 110 mm, cutting width (max.): 920 mm, saw blade diameter: 350 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, actuation type: manual, rotational speed (max.): 3,000 rpm, total length: 1,080 mm, total width: 1,100 mm, total height: 1,600 mm, overall weight: 150 kg, Equipment: documentation/manual, saw blade guard, For sale is a DEWALT radial arm saw 1600S in very good condition (almost new) with accessories and 3 new, unused saw table shims. The saw is being sold privately and has never been used professionally, which explains its excellent condition. It is specifically designed for stationary use. Thanks to the powerful 4 hp motor, materials up to 110 mm thick can be processed with saw blades up to 350 mm in diameter. The motor runs with the highest precision on 8 large special ball bearings in the prismatically ground running surfaces of the arm. The arm, column, and frame have additional reinforcements. The DEWALT 1600S is also suitable for use with pneumatic feed in series production. With a cutting width of 610 mm, the DEWALT 1600S is the ideal machine for processing series parts in interior design, shop fitting, trade fair construction, furniture manufacturing, and the industrial production of wooden components. The saw has a sturdy metal base, three new, unused work tables, a new universal saw blade, and various accessories. The original operating manual is included. Max. cutting length (90° crosscut): 610 mm Standard cutting depth: 110 mm Max. cutting depth (45° miter cut): 60 mm Iijdpfxozyymbo Ahnog Max. cutting width (rip cut): 920 mm The saw must be picked up.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Refurbished Equipment Iijdpfx Ahsy S Dh Njnsg - BHS Sonthofen Mixer - DKX 3.0 Type (3 m³/cycle) - Holding Hopper - Set of 6 Hoppers - Cement Scale - Water Scale