Used C 368 for sale (54,243)

Year of construction: 1996, condition: used, Max. working width: 1100mm, voltage/frequency: 400V/50Hz, current: 74A. Inspection by appointment possible. Tedpfxjz A An Do Af Aec

Condition: used, Year of construction: 2011, Used Equipment Year of Manufacture: 2011 Condition: Currently installed Equipment and Technical Data: -Filter housing base ring NFHSU 9/9 with discharge chute for press - Discharge: 1.1 kW - Storage volume in the base ring approx.: 3.25 m³ - Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm - Ground clearance: 350 mm - Conveyor screw for briquetting press 0.75 kW - Extension and expansion rings are optional; max. storage volume approx. 12 m³ - Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm - Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap - Filter for filter housing NFHSU 9/9/20, filter area 116 m²: The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection. Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation. Further technical data: - Filter tube length: 2,000 mm - Filter tube diameter: 230 mm - Number of filter tubes: 81 - Filter area: 116.0 m² - Filter regeneration: automatic/motorized - Number of vibrating motors: 4 pcs - Fan shroud for NFHSU 9/9 including inspection door - Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa: A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper. Technical data at a glance: - Volumetric flow: 16,400 m³/h - Corresponding underpressure: 3,200 Pa Tjdpfszvz Tbex Af Aoc - Electric motor: 22 kW / 400 Volt / 50 Hz - Speed: 3,000 rpm - Design: B5 - Pressure nozzle: without - Application area: Nestro underpressure filter and others - Injection nozzle d= 400 mm with flange ring - Injection nozzle d= 350 mm with flange ring - Backflow damper d= 350 mm with flange edge - Backflow damper d= 400 mm with flange edge - Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5: Technical data: - Power consumption (hydraulics): 5.5 kW - Briquette diameter: 50 mm - Weight: 650 kg - Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h - Ground clearance with base frame (art. no. 710300): 350 mm - Briquetting press, dust-proof - Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment

Condition: used, Year of construction: 2021, functionality: fully functional, Save on liquidity – leasing and hire purchase options available! You are bidding on a Hobart rack conveyor dishwasher, type CN series, in top condition, energy-efficient, with exhaust and wastewater heat recovery. This will result in significant long-term energy savings. The machine was first installed in June 2021 in a canteen and used for lunch service. Due to the closure of the business, operations were discontinued. The dishwasher was newly purchased by the operator and accordingly well-maintained, with all necessary servicing carried out. Todpezu Rwmsfx Af Ajc HOBART presents the new generation of the proven CN series as a powerful PROFESSIONAL version – the new rack conveyor dishwasher stands for greater efficiency and economy, making commercial dishwashing even more sustainable. Professional, powerful, and reliable for the daily challenges in commercial kitchens. Optimal washing results with low energy consumption – even with plastics. The CN rack conveyor dishwasher series has a modular design and operates in a left-to-right configuration, starting with pre-washing, main washing, rinsing, drying, and discharge via a conveyor belt. The disassembly was carried out by Hobart’s factory service department. Commissioning will also be carried out by the factory service department, with a contribution to costs, so that the warranty applies. This machine has a list price of approximately €58,000 net / €69,020 gross. You will receive an invoice with VAT shown. 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. A prerequisite for warranty claims is that the machine is installed and commissioned by an authorized Hobart service department. Technical data: External dimensions of the dishwasher: W: 4215 x D: 2336 x H: 2150 mm, dimensions see photo sketch Passage width: 510 mm Passage height: 440 mm Electrical connection: 400V 3NPE 50Hz; 26.5kW Model: CN-C-A-CDC Serial number: 866707054 Year of manufacture: 2021 Subject to change and errors.

Condition: used, BOGE C 9 Screw Compressor, 7.5 kW / 10 bar Tedpfx Aezxpi Njf Aec Manufacturer: BOGE Type: C 9 Year of Manufacture: 2017 Machine Type: Screw Compressor / Industrial Compressor Volume Flow: 1,060 m³/min Final Compression Pressure: 10 bar For sale is a used BOGE C 9 screw compressor, including the ELMED HELIO-STROB BETA A2 stroboscope measuring system, separate stroboscope hand lamp, connection cable and operating manual. The compressor is suitable for supplying compressed air to machines, workshops, production facilities and manufacturing companies, as well as for general industrial compressed air applications. Operation is via the BOGE base control system with a digital operating and display panel. Technical data: Manufacturer: BOGE Type: C 9 Year of Manufacture: 2017 Equipment Type: Screw Compressor Volume Flow: 1,060 m³/min Final Compression Pressure: 10 bar Motor Power: 7.5 kW Motor Speed: 3000 min⁻¹ Operating Hours (according to display): 15,749 h Control System: BOGE base control CE Marking: present Made in Germany ELMED HELIO-STROB: Manufacturer: ELMED Messtechnik Series: HELIO-STROB Type: BETA A2 Equipment Type: Stroboscope Measuring System Mains Connection: 115 / 230 V AC Mains Frequency: 50–60 Hz Max. Power Consumption: 80 VA External Clock Input: present CE Marking: present BOGE base control system Digital operating and display panel Emergency stop switch Sound-insulated housing CE marking ELMED HELIO-STROB BETA A2 control unit ELMED stroboscope hand lamp External clock input Digital display Connection cable Operating manual HELIO-STROB Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. BOGE operating display shown in the on state. ELMED HELIO-STROB shown in the on state. Nameplates present. Dimensions: BOGE C 9 (W × D × H): approx. 483 × 907 × 955 mm ELMED HELIO-STROB BETA A2 control unit: approx. 280 × 240 × 80 mm ELMED hand lamp: approx. 182.5 × 117 × 117 mm Shipping Data: Weight BOGE C 9: approx. 215 kg Weight ELMED control unit: approx. 2.3 kg Weight ELMED hand lamp: approx. 1.5 kg Total weight of equipment: approx. 219 kg plus cable and operating manual Shipping by freight forwarder possible Scope of Delivery: 1 × BOGE C 9 screw compressor 1 × ELMED HELIO-STROB BETA A2 control unit 1 × ELMED stroboscope hand lamp 1 × Connection cable 1 × Operating manual HELIO-STROB Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), SINGLE SIDE EDGE BANDER (RIGHT) Edges (band in rolls) thickness (Min/Max) mm 0,3/ 3 Edges thickness in stips / lippings (min/max) mm 0,4 / 8 Panels thickness (min/max) mm 8 / 60 Tjdpfx Afozyahxs Asc Numerical Control POWERTOUCH Feeding speed (adjustable) m/min 8 - 14 Top pressure system with rubber wheels Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) (2 x Kw 2,2) Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) QA65 N Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) (2 x Kw 0,22) Fine Trimming unit (2 x Kw 0,55) Corners Rounding (contour trimming) (1 x Kw 0,35) Profile edge scraping unit MZ40 Glue scraping unit Buffing unit (2 x Kw 0,09)

Condition: new, Year of construction: 2026, Combination saw-milling machine minimax st 3c F 16 Swiveling saw blade, swiveling milling spindle, and format sliding table made of anodized aluminum Stable steel cast iron construction Large support surface and precise cast iron table High-precision format sliding table made of anodized aluminum (travel 2250 mm) Large rip fence frame (900 x 600 mm) with an extendable aluminum telescope stop up to 2660 mm, featuring professional stop flaps Max. saw blade diameter 315 mm with scoring device, swiveling from 90° to 45° Saw parallel fence with fine adjustment Stable saw unit and large dimensioned double-bearing milling unit ensure maximum stability, precision, smooth running, and long service life Solid and precise machine table made of stress-free cast iron Three milling speeds, manually adjustable from 3500 - 10000 min⁻¹ With right-hand/left-hand rotation of the milling spindle Standard arc milling guard Safety flip stop jaws made of aluminum Two motors with high power reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx. 470 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Dust extraction port diameter saw blade guard 60 mm Electrical data Power of drive motor 2 x 5.0 kW Connection voltage 400 V Mains frequency 50 Hz Milling spindle Spindle inclination 0 – -45 ° Usable length of the spindle 100 mm Spindle speeds 3500/7000/10000 min⁻¹ Milling tool diameter max. non-tilting 210 mm tilting 180 mm dovetail milling 275 mm Circular saw unit Rip fence length 1600 mm Cutting width with parallel fence 900 mm Max. crosscut width to the left of the saw blade 2660 mm Saw blade inclination 90 45 ° Max. cutting height 90° 90 mm Tsdshp Rdlopfx Af Asc Max. cutting height 45° 63 mm Max. saw blade overhang 90° 100 mm Max. saw blade overhang 45° 78 mm Diameter (main) saw blade 315 mm Explanation diameter (main) saw blade: independent of the scoring saw Speed (main) saw blade 4000 min⁻¹ Sliding table and table Table length 1112 mm Table width 430 mm Scope of supply: Arc milling guard Anodized aluminum format sliding table Aluminum stop jaws Flip stops Location: In stock at 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2012, Overview The filler was built in 2012 by Italian manufacturer Framax. The filler comes with a Framax labelling machine. The machines have been regularly maintained and is already dismantled. Both machines can be viewed in person. Techn. Details Capacity: 1,800 bph (max. 2,200 bph) Processed format: 0,33 L Crown cap Filling monoblock | Framax | RFC‐09/08/1‐C 2K A/P | 2012 Rinser positions: 9 Filler positions: 8 Capper positions: 1 Suitable for natural beer Type of filling valve: EVO2 (15 mm) Max. diameter of bottle: 115 mm Min./ Max. height of bottle: 200 mm/ 350mm Dimensions: Length: 4,500 mm Width: 1,250 mm Height: 2,500 mm Tedpfx Afsrlf Tqe Asc

Condition: new, Year of construction: 2026, Compact design, high reliability, and excellent value for money: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foams, or paper. A special feature is the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput (kg/h): 30-40 Hydraulic oil capacity (l): 100 Weight (kg): 530 Equipment: Tedpebtnf Ejfx Af Ajc Press Powerful pressing mechanism with wear-resistant, chrome-plated clamp Pre-compactor with end-position dampened cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor Accessories: Briquette length monitoring Automatic on/off Location: 54634 Bitburg

Condition: as good as new (ex-display), Year of construction: 2026, minimax c 26g TERSA – Multi-functional machine for sawing, milling, surfacing, and thickness planing. The worktables made of heavy-duty ribbed cast iron and the base frame made of welded steel guarantee torsional rigidity and vibration-free operation. Unique in this performance class: smooth-running, anodized aluminum format sliding table with ball-contact system. Swiveling saw blade from 90° to 45°. Table extension with aluminum stop for panels and large workpieces. Planer unit with TERSA quick-change system with three planer knives. Helically toothed steel infeed roller for consistent workpiece feed during thickness planing. Arc milling guard for profiling, standard with fine adjustment. Milling unit with two speeds. Three independent motors for each working unit. Quality – Made in Europe. Tedpedqzh Tefx Af Aoc Equipment details Aluminum sliding table With a tried-and-tested ball-contact system Dust and dirt-resistant due to minimal contact point between ball and trapezoidal rail Permanently smooth running Saw unit adjustment Manual height and bevel adjustment of the saw unit via star handle Accurate positioning using a scale TERSA planer knife shaft No more adjusting and screwing Planer knife changes in seconds Self-locking Particularly quiet Table milling machine The milling unit has two speeds for flexible tool use. The machine is equipped with a fine-adjustable arc milling guard for profiling. With the aluminum sliding table, mortise and tenon joints can be easily cut. Thickness planer With the powerful thickness feed, workpieces up to 200 mm high can be planed. The helically toothed infeed roller guarantees consistent feed. The surfacing table can be folded inward to save space. Changing from surfacing to thickness planing is done in seconds with a single movement. Surfacing planer Standard with TERSA planer knife quick-change system Large-sized surfacing tables The surfacing and thickness tables made of cast iron guarantee the highest smoothness and vibration-free operation. Saw unit Saw can be swiveled up to 45° With saw blade 250 mm Ø with max. 80 mm cutting height A width of up to 500 mm can be cut on the parallel fence. Table extension With degree scale and aluminum stop for angled cuts on panels and large workpieces Scope of supply: Tersa quick-change planer knife shaft Anodized aluminum format sliding table Miter fence with a folding stop Multi-function fence for parallel cutting and surfacing Eccentric clamping arm Model: minimax c 26g TERSA Article no.: 5500027 Cutting length: 1200 mm Cutting width with parallel fence: 500 mm Max. crosscut width to the left of the saw blade: 1200 mm Saw blade inclination: 90 - 45 degrees Max. cutting height at 90°: 80 mm Format sliding table length: 1140 mm Format sliding table width: 201 mm Format sliding table height: 70 mm Saw table length: 1024 mm Saw table width: 224 mm Saw table height: 900 mm Planer knife shaft type: TERSA Planer knife shaft diameter: 62 mm Number of planer knives: 3 pcs Surfacing table width: 260 mm Surfacing table length: 1040 mm Swivel angle of saw/surfacing fence: 90/45 degrees Max. material removal during surfacing: 3 mm Thickness table length: 450 mm Thickness table width: 260 mm Min. workpiece thickness: 3 mm Location: In stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1996, functionality: fully functional, Work area: 800x600x500 Rapid traverse rate: 30 m/min Spindle speed: 15000 RPM, SK40 Tjdjzv Syfopfx Af Ajc NC rotary table, diameter = 280 mm Electronic handwheel module Electrical thermal expansion compensation Ethernet interface, TNC 426/430 Measuring probe system, SK40, Renishaw Chip conveyor without chip cart Enclosed cabin roof section Air blow-off device, C800 The spindle was replaced in May 2018 with a total operating time of 25,185 hours. The current operating time is 31,083 hours. This means that the spindle has been in operation for 5,898 hours since its replacement.

Condition: used, Year of construction: 2002, -with belt cleaning at the machine outlet under a folding table with belt conveyor. Tjdpfx Aszv Tfcjf Aoc In 2021, the PLC control, the touch screen control, and the frequency converter for the spraying-gun drive were replaced. - Manufacturer: Venjakob - Type: HGS-Duo/C - Retrofit 2026 (year of manufacture 2002) - Working width 1,300 mm - Operating side right - Price for refurbished machine - Current condition, in the refurbishment phase - Gun drive in duo design - Dry extraction - Exhaust air capacity 10,000 m³/h - Extraction nozzle diameter 500 mm - Belt conveyor system - Feed speed approx. 5 and 14 m/min - With belt cleaning system - With paint recovery via V-belt system - Gun control, touch screen - Installed color circles 1 pc. - 4 Airelss sprayers, Krautzberger KAA1300 - 1 HD airless pump - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet integrated into the machine. - Total connection ~ 19kW - Length: 6,485mm - Width: 3,690 mm - Height: 2,497 mm - Volts, Hz 400 / 50 - Color light gray 7035 + black - Location, in stock - Voltage fluctuations max. +/- 5% The pictures are examples of an unrefurbished spray machine of the same type. _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Working area X: 6250 mm Working area Y: 1840 mm Working area Z: 250 mm 13.2 kW electro-spindle, HSK F63 connection Vertical drilling heads Horizontal drilling heads X: 8 Horizontal drilling heads Y: 4 Grooving blade in X direction 10-position revolver tool changer Tjdpezy Hc Nefx Af Asc 14-position chain tool changer Working table with 12 rails Programming software: BiesseWorks Advanced 1 vacuum pump at 250 m3/h Chip conveyor belt Safety mats Protective netting Approximate weight: 7200 kg.

Condition: excellent (used), Year of construction: 1998, Min. tool mounting height: 200 mm Max. plate distance: 550 mm Column spacing: 270 x 270 mm Screw diameter: 15 mm Clamping force: 400 kN Includes temperature control unit Includes handling robot Tsdezkfh Sjpfx Af Ajc The machine is in very good condition and is operational.

Condition: new, power: 19 kW (25.83 HP), fuel type: diesel, Year of construction: 2026, operating hours: 90 h, Equipment: UVV, additional headlights, all wheel drive, cabin, pallet forks, standard shovel, 4-cylinder Kubota V1505 engine Tedpfx Afjyz T Rxo Aec 2-stage hydrostatic drive, 12 V electrics with battery isolator switch, Adjustable steering column, 20 km/h version, Axles with 100% differential lock on front and rear axle, Hydraulic quick coupler - Weidemann type 31 x 15.50 – 15 BKT – construction profile Cab with heating and radio pre-installation, Standard lifting mast, 3 control circuits, Operating manual, 2 LED work lights front and 2 rear, Reversing light, Rear license plate holder incl. lighting, Lighting system with TÜV approval, Additional rear weight: 160 kg Standard bucket with 0.5 m³ Pallet fork with TÜV approval This offer is non-binding. No guarantee for equipment details. Subject to errors, changes, and prior sale.

Condition: used, Year of construction: 2014, Overview  This filling and labeling monoblock was manufactured in 2014 by the Italian company Framax. The machine was last operated in July 2025 and is still installed in the brewery but not in operation. It is immediately available for sale. Full original instruction manuals for both the filler/capper and labeler are included. Technical data - Capacity: Approx. 2,000 bph (330 ml bottles, manufacturer estimate); approx. 1,670 bph (500 ml bottles, actual use) - Formats possible: 250 ml – 1,000 ml - Formats included: 330 ml and 500 ml long neck bottles - Bottle cap type: 26 mm crown caps - Execution: Tjdpfx Ajxalibjf Ajc - Filler/capper: Modulblock 10/1-C - Labeler: LLAC-R-SQ (VAR STEP) - Additional features: - Hot foil stamper (added later) - CIP dummy bottles - Change parts for 330 ml format

Condition: used, functionality: fully functional, load capacity: 2,500 kg, Fork positioner Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: None Tjdpfsw Sp Dbox Af Aec Technical condition: New Description: Brand new fork positioner, frame width 1,150 mm, opening center/center 250 to 1,050 mm, brackets for standard forks, with sideshift valve.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Control: Mazatrol M Plus Travel paths: x-1660 y-760 z-660 mm Clamping surface to spindle head: 155 – 815 mm Distance from column to spindle center: 808 mm Spindle inner taper: SK 40 Tool changer: 24 – compartment Spindle speeds: 7000 rpm Usable table area: 2000 x 760 mm Table load: 1000 kg Rapid traverse x, y axis: 24000 mm/min Tedpfxsvrxd He Af Ajc Rapid traverse z axis: 20000 mm/min Feed: 1 – 5000 mm/min Machine weight: approx. 8700 kg including chip conveyor, coolant system The machine can be inspected under power.

Condition: excellent (used), Year of construction: 2022, operating hours: 2,394 h, functionality: fully functional, Controller HAAS Swing dia. 641 mm Tsdpfxjwvf Thj Af Asc Swing over carriage 413 mm Maximum cutting diameter 229 mm Maximum cutting length 356 mm X axis travel 200 mm Y axis travel +/-50 mm Z axis travel 355 mm Bar Capacity 44mm C axis 0,01 degrees Spindle Speed 6000 rpm Spindle Nose A2-5 Milling spindle speed 6000 rpm Rapid Feedrates X/Y/Z = 30,5 / 12,7 / 30,5 m/minute Spindle Motor Power 11 kW Turret Positions 12 stations Tool holder type VDI30 Weight 3600 Kg Dimensions LxWxH = 3048 x 2108 x 1803mm Accesories, features - C Axis programmable - Y Axis - Live tool turret (each places) - Integrated tool presetter - Chip conveyor - 3 jaws hydraulic chuck D160 mm - Tailstock - Foot pedal - Machine mounts - Manuals The machine is barelly used and is in great technical and optical condition.

Condition: used, Year of construction: 2003, Overview  This rinser-filler-capper bloc was manufactured in 2003 by Kosme. The bloc is designed for filling carbonated and non-carbonated beverages in PET bottles. It includes a rinsing machine with 2 channel and an isobaric filler with integrated capper for plastic screw caps. The machine is currently available promptly, and further information is available upon request. Technical data  - Capacity: - 10,000 bottles per hour - Formats: - 1,0 l PET bottles - 0,5 l PET bottles - 0,33 l PET bottles - Working direction: Tsdewiy Tvopfx Af Aoc - Clockwise - Rinsing system: - 36 rinsing nozzles - 2 channel rinser - With stainless steel pipes - Filling system: - Isobaric system - 36 filling valves - Capping system - Manufacturer: Arol - 9 capping heads - With 2 cap chutes, 1 for 28 mm plastic caps, 1 for sport caps - Dimension - Approx. 4.100 x 3.000 x 4.000 mm Scope of Delivery  - Rinser, filler, capper in triblock construction - Vacuum barrier system - Stainless steel CIP cups - Cap feeding system

Condition: used, functionality: fully functional, machine/vehicle number: ZCFCE70F405687510, mileage: 59,210 km, power: 152 kW (206.66 HP), first registration: 07/2025, fuel type: diesel, empty load weight: 3,395 kg, maximum load weight: 3,605 kg, overall weight: 7,000 kg, tire size: 225/75 R 16C, axle configuration: 4x2, fuel: diesel, fuel tank capacity: 90 l, color: silver, driver cabin: day cab, gearing type: automatic, suspension: steel-air, number of seats: 3, loading space volume: 22 m³, loading space length: 5,100 mm, loading space width: 2,200 mm, loading space height: 1,960 mm, Equipment: ABS, EBS, air conditioning, cruise control, electronic stability program (ESP), navigation system, power assisted steering, traction control, Object number: #31080 Urban transport vehicle Euro 6 207 hp Wheelbase: 4,350 Suspension: BL Tires: 225/755 R 16C Fuel tank capacity: 90 liters Transmission: 8-speed Hi-Matic Air conditioning Disc brakes Cruise control Traction control Trailer hitch with ball head Sliding curtains on both sides Hollow outer frame Driver's luxury seat, sprung/heated Double seat bench on the right Electric windows, 2-way Electric/heated exterior mirrors My Iveco Infotainment, 10 inches Including navigation Rear view camera ACC adaptive cruise control AEBS emergency braking assistant City Brake ESP Twin tires on rear axle Daytime running lights Light/rain sensor Driver drowsiness detection system DPF Central locking with remote control Fog lights Voice assistant Alexa Leather steering wheel Intelligent traffic jam assistant (TJA) Start/Stop Full-LED headlights Body manufactured by Krukenmeier Front airbags for driver and passenger Front object detection (MOIS) Traffic sign recognition with intelligent speed assistant (ISA) Lane centering plus (LC) Turning assistant, passenger side (BSIS) Tire pressure monitoring system Roof spoiler Side underrun protection Toolbox Cornering light Apple CarPlay Android Auto Leasing and financing available upon request! Tedpfxozzxiwo Af Aoc

Condition: used, 328467, N 15/65HA, Nabertherm, muffle furnaces up to 650°C Model: 328467 Type: N 15/65HA Condition: Used Todpjur S I Isfx Af Ajc

Condition: excellent (used), functionality: fully functional, power: 47.81 kW (65.00 HP), fuel type: diesel, fuel: diesel, Year of construction: 2019, Equipment: all wheel drive, HOLDER C65 SC Municipal implement carrier with winter maintenance equipment Equipment included: 1. FIEDLER KVS-1205 wedge vario snow plow with a maximum clearing width of 120 cm 2. FIEDLER FSSA-650 brine silo spreader with control panel 3. FIEDLER FKM-1310 front-mounted snow sweeper Todpfx Aoxbf Nkof Ajc This HOLDER C65SC implement carrier was first commissioned in 2019, has only 88 operating hours according to the meter, and is in well-maintained overall condition with the usual signs of use and wear for this equipment class. Recent service completed. - Net price: €57,900 // Gross price: €68,900 - Viewing / test drive possible by arrangement - Nationwide shipping can be organized; shipping costs depend on distance. - We are happy to provide you with an attractive leasing or financing offer through our leasing partner!

Condition: used, mileage: 77,000 km, power: 129 kW (175.39 HP), first registration: 06/2021, fuel type: diesel, overall weight: 7,490 kg, gearing type: automatic, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, We are delighted that our offer has sparked your interest and can assure you that you will be able to purchase a good and reasonably priced vehicle with a verifiable service history from us! GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We will organize your registration and the export documents / EUR 1 and manufacturer's declaration for export. FINANCING If desired, we will be happy to provide you with a LEASE-PURCHASE or FINANCING offer. SERVICE Vehicle inspection (TÜV/HU) / Occupational Safety and Health (UVV LBW) / Load securing test (LGS) / Tachograph inspection / Installation of an On-Board Unit (OBU) and service by our AUTHORIZED WORKSHOP. TOLL / ROAD FEES Toll can be booked on-site. Tjdpfx Afozz Urue Aec ARRIVAL / DISTANCES Wittlich train station 500 m away Frankfurt Airport 150 km away Frankfurt-Hahn Airport 40 km away Luxembourg Airport 75 km away Sale in accordance with our general terms and conditions. The information on the internet is a non-binding description. It does not constitute guaranteed characteristics. The seller is not liable for typographical and data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: excellent (used), lifting height: 16,400 mm, Year of construction: 2018, operating hours: 1,185 h, Drivetrain Make of engine: Yanmar Weights Empty weight: 2.800 kg Functional Lifting capacity: 3.150 kg Dimensions of cargo space: 315 x 75 x 195 cm CE mark: yes Todpfx Aey Rz Evsf Aec Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Production country: NL Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Hoeflon C6 * 2018 * 1,185 operating hours * Diesel (Yanmar) and 230 Volt drive * Equipped with all options * 16.4 meter working height * 14.4 meter horizontal reach * 3,150 kg lifting capacity * 2,800 kg curb weight * Remote Control * Articulated outriggers * Diesel engine serviced by Hoeflon * Full maintenance and various parts replaced by Hoeflon * Includes documents

Condition: used, LVD Shear Tjdpfx Afex Tqtbs Aoc Type HST C-10/31 Capacity 3000 x 10