Used Chiron (Niemcy) Chiron Werke Gmbh & Co. Kg – Tuttlingen for sale (1,00,017)

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min Ksdpfxow E H E Ro Aayjlr - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Klodpfjwh Rp Eex Aayor Additional Machine Equipment: - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 106546-11, total height: 3,550 mm, total length: 7,185 mm, total width: 4,720 mm, overall weight: 8,000 kg, The drilling method used by the deep hole drilling machine is single-lip gun drilling. Drilling Unit Information: - Number of spindles: 1 - Spindle speed, infinitely variable: 500 - 8,000 rpm - Spindle drive power: 11 kW at 60% duty cycle - Max. drilling depth: 1,000 mm (in one pass, no retraction required) - Drilling diameter: 3 - 35 mm (based on ST 60) - Drilling diameter / indexable inserts: 40 mm - Max. thread cutting: M27 - Milling material removal rate: 250 ccm/min Travel Paths: - X-axis travel: 1,050 mm - Y-axis travel: 600 mm - Z-axis travel: 800 mm - W-axis travel: 1,250 mm (with 2 steadies) Traverse Speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid System Information: - Coolant supply: deep drilling oil - Tank capacity: 1,200 liters - 1 x scraper-belt chip conveyor - 1 x screw conveyor system - 1 x hydraulic unit and pneumatic unit/equipment - 1 x central lubrication system - 1 x submersible pump: Pump delivery: 200 l/min - 1 x low-pressure pump: Pump delivery: 100 l/min Drive power: 2.2 kW - 1 x compact band filter: Filtration rate: 175 l/min For machining steel and non-ferrous metals - 1 x radial piston pump with remote adjustment: Delivery rate: 2 - 120 l/min Pump drive: 11 kW - 1 x air cooler (heat exchanger): 22.5 kW - 1 x oil mist extraction unit: Extraction capacity: 1,250 m³/h Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with tool holder SK 40 Tool Changer Magazine comprising: - Tool magazine with intermediate gripper - Tool holder SK 40 - Max. permitted tool diameter: 80 mm - Max. permitted tool length: 250 mm - Number of tool storage positions: 80 - 2 x swiveling tool steady rests for guiding and supporting long drilling tools, with automatic positioning to home position. Clamping Table with B-Axis and NC Rotary Table: - Length / width: 800 x 600 mm - B-axis: 360° - Positioning accuracy, B-axis: +/- 30 seconds - Table travel: 800 mm - Payload (centered): 1,500 daN Electrical Equipment Information: - 1 x CNC control system, Heidenhain iTNC 530 - 1 x drilling process monitoring - 1 x RENISHAW touch probe Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 26 kW Klsdpfsxdm Awsx Aayjr

Year of construction: 2023, condition: like new (used), machine/vehicle number: 530211, Properties: → robust machine housing made of cast iron → automatic loading and unloading of the test force → change between lens and indenter automatically → LED lighting → digital measuring eyepiece → LCD color display touch screen → Conversion to other hardness scales (e.g. HRC) → easy to use Technical data: → Test loads in kg (0.3 / 0.5 / 1 / 3 / 5 / 10 / 20 / 30) → Test method Vickers → Eyepiece 10X → automatic Revolver → Objectives 10X / 20X / 40X → Test force application 50µm/sec → height Capacity max. 210mm → depth Capacity max.160mm → Conformity: DIN EN ISO 6507 / ASTM E-384 → Weight approx. 75kg → Power supply 230V / 50Hz Standard delivery: → Hardness tester → Diamond indenter 136° Vickers → Flat Anvil Ø80mm → V-Anvil Ø80mm → Eyepiece → Objectives 10X / 20X / 40X → LED lighting Klsdpfxoc Ipc Uo Aaysr → Power cable → Accessory case → Operating instructions OPTIONALS: → VMS3-Software (Video-Measuring-System) → X/Y-Stage 200x200mm (Movement 25 x 25mm) → Digital micrometer (to transmit the edge distance to the VMS3-Software) → “Automatic measurement” module (only in combination with VMS3-Software)

Year of construction: 2023, condition: new, - modern ergonomic design - manual test with analogue Measuring Clock (Reading accuracy 0.2 HR) Kljdpopbbc Hsfx Aayjr - easy to use and quick test process - Height Capacity approx. 185mm - Hepth Capacity approx. 160mm - Dimensions 545x182x755mm Test loads: 60 / 100 / 150kg Test method: HRA/HRB/HRC Standard delivery: - Hardness tester - V-Anvil - Flat Anvil Ø150mm - Flat Anvil Ø50mm - Ball Indenter 1/16" with ball - Diamond indenter 120° Rockwell - Spindle protection - Accessory case

Year of construction: 2023, condition: as good as new (ex-display), machine/vehicle number: 520511, Features: → robust machine housing made of cast iron → automatic loading and unloading of the test force Kjdpfx Aajc Ipckjyelr → automatic change between lens and indenter body → LED illumination → digital measuring eyepiece → LCD color display touch screen → conversion to other hardness scales (e.g. HRC/HB) → easy operation Technical data: → test loads in grams (10 / 25 / 50 / 100 / 200 / 300 / 500 / 1000). → Vickers testing method → cross table 110 x 110 mm / travel 25 x 25mm → eyepiece 10X → automatic obejctive turret → objectives 10X / 40X / 60X → max. specimen height 90mm → max. specimen depth 110mm → conformity: DIN EN ISO 6507 / ASTM E-384 → weight approx. 50kg → power supply 230V / 50Hz Scope of delivery: → hardness tester → diamond indenter 136° → Cross table 110 x 110mm → Eyepiece 10X → revolving nosepiece → Objectives 10X / 40X / 60X → LED illumination → Power cord → Accessories case → Instruction manual OPTIONAL → VMS3 software (video measurement system) → Digital micrometer (for transferring the edge distance into the VMS software) → Module "automatic measuring" (only in connection with VMS3 software) → PC system / monitor

Condition: excellent (used), functionality: fully functional, 1 x Seitz-Werke GmbH filling machine for bottles. Fed by counter-pressure tank. Model - SF 12. Date of manufacture - 1961 (has been refurbished since). Speed - up to 1200 bph (depending on filling volume). Capacity - variable filling range (whatever bottle size fits into holders). Kledpfx Aaox A A I Heyer Overall dimensions - 1100mm diameter x 2350mm H. Last used in March 2023.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 16501575, volume flow: 4,800 m³/h, input voltage: 380 V, power: 2.5 kW (3.40 HP), Equipment: type plate available, The resulting dirt particles, emulsion and oil mist, as well as smoke, are captured directly at the source and passed through the individual filtration stages. The separated liquid collects at the bottom of the unit and can be returned to the machining center via the siphon. In the first filtration stage, larger particles are retained by an aluminum pre-filter to protect the downstream high-performance fleece filters. The second filtration stage removes the majority of fine emulsion and oil mist. This stage consists of an aluminum frame equipped with a G4 filter mat and an F5 filter mat according to DIN 24185 / EN 779. The filter mats must be replaced depending on the degree of contamination. The third filtration stage consists of a large-area HEPA filter of class H13. A consistently high filtration efficiency of 99.95% at a particle size from 0.3μ DOP is ensured here. Type testing in accordance with DIN EN 1822-1 H13 allows the filtered air to be returned to the workspace. Ksdpfx Aaoyz Sn Nsyjlr

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, shaft length: 10,600 mm, laser power: 60 W, type of cooling: air, total width: 800 mm, total height: 1,800 mm, total length: 1,700 mm, working range: 1,200 mm, warranty duration: 6 months, height adjustment type: electric, table height: 7,000 mm, table length: 4,000 mm, Equipment: cabin, Used CO₂ laser system for marking, engraving, and cutting plastics, wood, acrylic, paper, and more. Refurbished, 6-month warranty, Made in Germany. Technical Specifications - Laser source: CO₂ laser, beam source refurbished in 2023 - Peak power: 60 W - Wavelength: 9,600 nm - Cooling: air cooling - Power supply: 230 V / 50 Hz - Scanner & optics - X-Y galvo scanner with mirror mount - F-theta lens: F = 200 mm, anti-reflective protective glass - Working area: 120 × 120 mm (other lenses available on request) Machine & Work Area - Fully enclosed workstation - Dimensions (W/H/D): 910 × 255 × 200 mm - Extraction port available (extraction system not included) Control & Software - Industrial PC Marking software: - Texts, logos, variable data - Import of DXF, PLT, WMF, bitmap - Intuitive, user-friendly interface Scope of Delivery & Safety Kledpfxoyfucve Aaysr - Complete machine, workstation - 6-month warranty - CE certified, TÜV-tested Condition & Delivery - Refurbished, technically tested Offer valid ex works plus shipping, while stocks last

Condition: new, Year of construction: 2022, functionality: fully functional, total height: 3,680 mm, operating pressure: 6 bar, final pressure: -0.6 bar, input voltage: 230 V, input frequency: 50 Hz, type of input current: AC, lifting speed: 166 mm/s, 2x Hova column-mounted slewing jib crane  2220847.03  max. load 50kg  Outreach 4m  Individual aluminum jib lengths (depending on load capacity)  Smooth-running trolleys with guide and counter-pressure rollers  Individual load capacities  Swivel range up to 270° also adjustable  Standard with HOVA chain hoist and vacuum lifter  Special solutions through in-house production  Surface-mounted aluminum column swivels  Suspended aluminum column swivels  Telescopic swivel arms  Articulated arm swivels  Mobile version for transportation by forklift or crane 2x HOVAMAT vacuum suction cups HV 50kg/90°  2220847.01  Horizontal and vertical transportation of panels of all materials  Individual load capacities with overload protection  Infinitely variable lifting speed 0-10 m/min  Operating voltage 1x230V/50Hz  Operating pressure min. 6-7 bar filtered compressed air  HOVA special handling handle for 1-hand operation with all commands for the lifting unit and vacuum lifter Klsdpfxot I S Slo Aayor  Low dead weight due to compact design  Suction plate arrangement with longitudinal and cross beam depending on requirements  Can also be picked up using magnets, mechanical or pneumatic grippers  Additional safety with HOVAMAT + and permanent weight monitoring using scales. Lowering cut-off for sleeping chain, load can only be released when set down, display for weight indication possible.  Optional: energy-saving unit 2x vacuum suction cups: €6,000 each 2x column swivel: €6,500 each The sale takes place under exclusion of any warranty.

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 5,000 kg, fork thickness: 80 mm, fork width: 180 mm, Telescopic crane 5000 kg with a load center of 600 mm Klodpeiuh I Aofx Aayjr Telescopic length on the hook: 3600 mm with a payload of 950 kg See load diagram for load center capacity One swivel hook with a payload of 5000 kg with a shackle One swivel hook with a payload of 3000 kg with a shackle Height adjustable via grid Galvanized bolts secured with a rope Fork pockets for forks up to 180 x 80 mm Safety chain to prevent the crane from slipping

Condition: good (used), functionality: fully functional, maximum load weight: 2,700 kg, permissible axle load (axle 1): 1,350 kg, permissible axle load (axle 2): 1,350 kg, trailer brake: trailer braked, Dimensions: approx. 420 x 180 x 220 cm Overall length: 570 cm The trailer is immediately ready for use and runs smoothly and reliably. Technical specifications: • Manufacturer: Böckmann Fahrzeugwerke GmbH • Model: CHF 613/20 • Gross weight: 2,700 kg • Axles: 2 × 1,350 kg (tandem axle) • Braking system: overrun brake (Knott KFZ 27) • Plug: 13-pin • Jockey wheel: present, fully functional Features & Highlights: • Sturdy tarpaulin body – weatherproof, good condition • Extremely robust Böckmann heavy-duty construction Kjdpfjyvy Aqox Aayslr • Tandem axle = smooth and safe ride • Numerous lashing points • Ready for immediate use Condition: The trailer is used but technically reliable. Tarpaulin is clean and tight, electrics fully functional, chassis solid. Normal signs of use on metal parts (see photos).

Condition: good (used), For sale is a directional jet agitator from Stelzer Rührwerke International GmbH. It is the model SM460-DF. Product data: 1455 R.p.m. 400V 18,5 kW Shaft length 720mm Kljdpfsfr Icusx Aaysr Blade diameter 280mm For further data see type plate (photo)

Condition: excellent (used), Key Information: Type: Scissor lift / lifting table Load capacity: 500 kg Condition: used – fully operational Controls: remote up/down + emergency STOP Klodpfx Aaeyw Ua Teyjr Power supply: 230/400V Year of manufacture: 2012 Price includes: complete set as shown in the photos ⚙️ Technical specifications: Load capacity: 0.5 t (500 kg) Lifting height: approx. 630 mm Motor power: 0.8 kW Operating pressure: 196 bar Weight: approx. 170 kg Table dimensions: approx. 90 x 60 cm Power supply: 3-phase 230/400V Protection rating: IP55 🛠️ Description: We offer a professional hydraulic scissor lift – ideal for use in workshops, manufacturing, and warehousing. The device allows for safe and convenient lifting of heavy components to an ergonomic working height. Features include: - Stable scissor construction - Hydraulic lifting system - Remote control (up/down + emergency STOP) Perfect for: - Assembly work - Packing - Service and production - Loading and unloading 📦 Set includes: - Scissor lift - Hydraulic power unit - Controls (remote) 🚚 Shipping: - Pallet shipping - Local pick-up possible

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, The subject of this offer is a used G2000 bun production line with a Mini Rex Futura divider-rounder from 2009. Designed for producing the following types of rolls: • Round stamped rolls • Elongated unstamped rolls • Sliced rolls • Twisted rolls • Kaiser rolls • Hot dog rolls • Poznań rolls Product description: • Fully automatic and compact bun production line Kledpfx Aaoy And Noyor • Based on a rotary Mini Rex Futura divider-rounder from 2009 • 2-row operation • Manual removal of products from the discharge conveyor • Stamping station with easily interchangeable tools; includes Kaiser and Corinthian stamping heads • Integrated elongation and flattening unit • Weight range: - For stamped rolls: dough piece weight from 25g to 75g – output: 1,800 pcs/h to 2,640 pcs/h - For unstamped rolls: dough piece weight from 80g to 125g – output: 1,800 pcs/h to 3,960 pcs/h • Proofing time: approx. 6 minutes at an output of 2,000 pcs/h • Dough types: wheat, graham, yeast, doughnuts • Single-person operation The machine is currently undergoing a general overhaul, which is expected to be completed by mid-June 2026. The photos show a similar bun line after a complete overhaul at Cream Serwis. If you are interested in pricing or would like to receive more photos, please contact us.

Condition: used, Year of construction: 1992, functionality: fully functional, power: 2,500 kW (3,399.05 HP), input voltage: 380 V, input current: 53 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 250 t, table length: 4,050 mm, year of last overhaul: 2007, Equipment: documentation/manual, We are offering this used Eisen u. Hammerwerk GmbH - EHT EHPS 25-40 press brake (hydraulic press brake, die bending press) for sale. Available immediately. Ready for operation. For sale due to new acquisition. Specifications: - 250 t pressing force - Cybelec DNC880S CNC control with Windows operating system (retrofitted in 2007) - Foot pedal control - Various upper tools in different lengths (segmented) - Lower tool (reversible die) in various lengths (segmented) - Hydraulic tool clamping - Support table for bent parts Technical data: - Machine type: EHPS 25-40 - Force: 2500 kN - Year of manufacture: 1992 - Working length: 4050 mm - Serial number: 207380 - Power supply: 3~ - Frequency: 50 Hz - Operating voltage: 380 V - Control voltage: 24/220 V - Rated current: 53 A - Main fuse rated current: 80 A Klodjy D Sy Repfx Aayor - Circuit diagram number: 209-178/372 If you have any questions or require more information, feel free to send us a message or give us a call. Machine location at our premises: Pavic Fahrzeugtechnik Homberg GmbH Poschweg 2 34576 Homberg Relbehausen Germany This is a non-binding offer. Subject to prior sale, errors and changes excepted.

Condition: used, Year of construction: 2008, functionality: fully functional, overall weight: 13,500 kg, rotor diameter: 470 mm, control cabinet length: 2,800 mm, control cabinet width: 600 mm, control cabinet height: 2,100 mm, rotor length: 2,000 mm, power: 220 kW (299.12 HP), rotational speed (max.): 80 rpm, filling opening width: 1,650 mm, filling opening length: 2,060 mm, sieve perforation: 50 mm, input voltage: 400 V, The most powerful model: Micromat 2000 V2 Drive motor: 2 x 110 kW, 400 V/50 Hz Control cabinet: complete with frequency converter Rotor speed: at 50 Hz approx. 80 rpm Rotor knives: 104 pcs. New Rotor knife shape: 43x43x19.5 mm Klodpfoyxxk Sox Aayer Feed opening: LxW 2030 x 1650 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Scraper comb: yes Counter knives: yes Hydraulic unit: complete Hydraulic cylinder for screen cassette: screens 50x50 mm Total weight approx. 13.5 t Dimensions LxWxH mm: approx. 6500 x 2970 x 2660 mm Inspection and test run possible by appointment. Incl. hopper Delivery time: immediate

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, Vertical milling center Chiron FZ08W Fanuc 21i-M Max RPM: 15,000 rpm High-pressure spindle through-cooling X = 300 mm Y = 250 mm Z = 250 mm The machine was originally supplied with 2 x 4th axis Peiseler RT 100, but the 4th axes have now been removed. Tool interface: HSK 32 ATC: 24 positions Serial: Yrzzng Kedpfx Aoxd T Rzoayolr Machine is currently in production and can be inspected at any time. The machine is in very good technical condition. I offer a 3-month startup warranty.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, input current: 21 A, type of input current: DC, volume flow: 6,045 m³/h, overall weight: 1,100 kg, ALKO ECO JET 60/5 HD EXTRACTION UNIT Sawdust extraction, dust extraction, self-cleaning negative pressure filter, ALKO ECO JET Kljdpfxoyrqnzj Aaysr The filter is pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Ideally suited for all types of dry dust in various technological processes. The filter bags can be exchanged according to requirements and intended use.

Year of construction: 2022, condition: ready for operation (used), A complete filling line with a 12-position gravity and vacuum filler with integrated twist-off capper for the food industry is available. Filling stations: 12, design: rotary machine, liquid viscosity: thin-medium, filling capacity: approx. 2000bottles/h, capping capacity: approx. 1000-1200/h, containers: heat-insulated, container volume: 35l/50l. This is a complete filling line including conveyor belts, accumulation table, sensors, rotary tables, pumps and format parts. The system was taken out of operation in 2024. Documentation available. An on-site inspection is possible. Kjdpfoy Ax Ufsx Aayolr

Condition: good (used), Year of construction: 2008, grinding length: 1,250 mm, table length: 1,250 mm, table load: 1,200 kg, table width: 500 mm, spindle speed (max.): 2,600 rpm, spindle speed (min.): 1,000 rpm, overall weight: 9,300 kg, travel distance X-axis: 1,400 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, power: 185 kW (251.53 HP), input voltage: 400 V, space requirement height: 2,870 mm, Equipment: rotational speed infinitely variable, X-axis: grinding length 1,250 mm, travel 1,400 mm Y-axis: distance from table to spindle center 700 mm, travel 600 mm Z-axis: grinding width see note, travel 600 mm Note: The grinding area in the transverse direction (Z-axis) depends on the travel path and the grinding wheel width. Example: Travel path across = 600 mm Grinding wheel width 60 mm = grinding width 660 mm Grinding wheel width 100 mm = grinding width 700 mm See pictures for more technical data Kjdpfju Hiq Rjx Aayjlr

Condition: new, Year of construction: 2025, Features: - Overband Neodymium Magnetic Separator - HP - Dust suppression - Conveyor belt speed control - Self-propelled chassis for semi-trailer Ksdpfew Elbdex Aayjlr

Condition: refurbished (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, Features: - Cutting unit - Side wall extension in cutting area +300mm (one-piece) - Flat base plate on crawler chassis - Dust suppression Kledpfx Aew Elm Tjaysr - Engine compartment fire extinguishing unit

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Kljdpfx Ajif Ek Reayjr Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife Kodofnlkwjpfx Aayolr • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.