Used Cooking Installation for sale (9,416)

Condition: good (used), Year of construction: 2008, Striebig Standard II TRK 6224 panel saw in good, fully functional condition. Unfortunately, the nameplate is missing. The year of manufacture of the saw should be approximately 2006 to 2010. Cutting length: 5300 mm Vertical cutting height: 2240 mm Horizontal cutting height: 2100 mm Cutting depth: 80 mm Power: 5.5 kW Ibsdpez Da U Dofx Ab Ijb Saw blade diameter: 300 mm Saw blade bore: 30 mm Dust extraction port: Ø 140 mm Designed for freestanding installation on the floor. Optionally, a matching dust extraction unit from Höcker Polytechnik Vacumobil 160 (year of manufacture 2015) can also be purchased (see last picture). The machine can, of course, be inspected and thoroughly tested while powered on. The sale is to commercial businesses and excludes any liability for material defects. No guarantee, warranty, or return.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, Taylor Hobson Talyrond 265 roundness measuring instrument. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. It is certainly of interest for motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing how it is constructed, except for the computer, which is a newer, more modern HP model with a small form factor. Max. diameter 350 mm Iodpjzcqy Ejfx Ab Iebb Max. test piece height 500 mm (higher values are possible by measuring in two parts, up to a maximum of 1000 mm...) Self-centering of the workpiece +/- 5 mm Max. weight of test piece 40 kg The system has been used very little and has had only two owners. The first owner, from whom I bought it, was an implant company in Hamburg; it was used in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2003 and 2005. The Taylor-Hobson measurement software is, of course, included and runs on the supplied HP computer (without a password...). It is also on the USB stick, perhaps for installation on another machine at your location. Accessories are included: the original Taylor-Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) is included for calibration! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! The system will be shipped on two Euro pallets via a freight carrier. It is already well secured on them. The Talyrond 265 and the desk will be wrapped with bubble wrap, etc., and secured with stretch film to provide extreme protection during transport. The system itself is fixed with "transport safety screws." Shipping is at the buyer's expense and will be on two Euro pallets. The measuring system should definitely be assembled and put into operation by a Taylor Hobson service technician, who can then also recalibrate the system on-site. This is now recommended after a few years. Errors can be made during assembly and commissioning. For example, some locking screws are installed for transport, and if you forget them, the system could be damaged when starting up. A truly well-maintained, very accurate system that will continue to provide excellent service for many years to come!

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 04344, BRAND NEW Leistritz ZSE Maxx Series (27 / 40 / 50) – 48 L/D – 0 Hours – Factory Wrapped! Technical Specifications Manufacturer: Leistritz Extrusionstechnik GmbH Models Available: ZSE 50 Maxx ZSE 40 Maxx ZSE 27 Maxx Year of Manufacture: 2024 Condition: 100% Brand New (Zero operating hours, completely unused, still in original factory packaging/wrapping) L/D Ratio: 48 L/D (All units upgraded directly by Leistritz with brand-new complete barrel sets and new shafts) All machines are with side feeders. Description Available for immediate individual or package sale: Three (3) pristine, 2024 Leistritz ZSE Maxx Twin-Screw Extruders (Models: ZSE 50 Maxx, ZSE 40 Maxx, and ZSE 27 Maxx). These machines were originally dedicated laboratory units held by Leistritz. To meet high-specification production requirements, Leistritz directly upgraded all three machines to a 48 L/D ratio. These OEM upgrades included a brand-new, complete barrel set and brand-new shafts installed entirely by the factory. All three machines are in 100% brand-new condition with zero (0) operating hours. They remain fully wrapped and packed in their original factory delivery boxes—they have never been opened, touched, or commissioned since arriving from Leistritz. Each machine is a complete, turnkey system supplied with its own high-end feeding setup, control architecture, and an extensive array of genuine auxiliary tools and spare parts. Scope of Delivery & Included Accessories (Per Machine) Feeding & Extrusion Setup Volumetric Feeder & Side Feeder (with dedicated side feeder trolley) Feed Ports Downstream & Die Attachments Strand Die Head, Die Plates, & Screen Carrier Plates Control & Electrical System Full Control Cabinet (including the Macrometer integrated into the operational panel) Complete set of Connection Cables & Cables for the Main Drive Comprehensive Spare Parts Kit for the control cabinet Vacuum & Degassing System Spare set of Screw Vacuum Pumps, Vacuum Hoses, & Vacuum Gauges Vacuum Pump Heating/Cooling Systems & Connection Hoses Sensors, Maintenance & Installation Melt Temperature & Melt Pressure Sensors Screw Mounting Device, Screw Extractors, & Cleaning Brushes Lifting Rods, Leveling Elements, & Corrosion Inhibitors Listing Summary for Buyers Available Models: ZSE 27 Maxx, ZSE 40 Maxx, ZSE 50 Maxx. Immediate Availability: Skip the massive factory lead times for a brand-new Leistritz line. Ibedpfsy Ufk Rjx Ab Ieb OEM Guaranteed: All modifications and extensions to 48 L/D were performed officially by Leistritz. Pricing available for individual machines or as a complete 3-machine package. Photos of the packed crates and original documentation are available upon request.

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 07.019.0000.00 / 114247 / 006, The mobile nozzle pack installation device from Theilen Maschinenbau is designed for lifting and positioning nozzle packs during assembly work. The welded frame structure is mounted on four swivel castors and features side handles for manual movement. The upper working beam is raised by a centrally mounted hydraulic hand jack and guided by two vertical guide elements. The beam is fitted with adjustable supports and mounting pins. The maximum load capacity is 200 kg. The device was manufactured in 2020 and bears CE marking. Safety symbols indicate a hot surface, an overhead hazard and the required use of head, hand and eye protection. Manufacturer: Theilen Maschinenbau GmbH Type: Nozzle pack installation device Iodpfx Abezw T Duo Iebb Number: 07.019.0000.00 / 114247 / 006 Year of manufacture: 2020 Maximum load capacity: 200 kg Lifting mechanism: Hydraulic hand jack Construction: Welded frame structure Undercarriage: 4 swivel castors Beam guidance: 2 vertical guide elements Conformity marking: CE

Year of construction: 2016, operating hours: 40 h, condition: like new (used), functionality: fully functional, 💎 Highlight: Only approximately 60,000 packs (approximately 40 operating hours) processed during the trial run! For sale is an absolutely like-new, high-end thermoforming packaging machine, a MULTIVAC R 245, in the extremely rare and hygienic medical version (Clean Design) (pp. 2, 15). The machine was purchased in 2016 for a medical project and was only used for a few test cycles in the sterile cleanroom. It is in absolute factory condition, both mechanically and visually (pp. 1-2). • Manufacturer: MULTIVAC Sepp Haggenmüller SE & Co. KG (p. 1) • Type: R 245 Medical / Clean Design (pp. 2, 15) • Year of manufacture: End of 2016 (pp. 1, 3) • Condition: Like new, unused (New Old Stock), stored in the cleanroom, dust-free • Operating hours: Only approximately 60,000 individual packs (equivalent to approximately 15 cycles) (p. 14) 📦 Technical data & dimensions • Total footprint (L x W x H): approximately 700 cm x 140 cm x 230 cm (including discharge conveyor) • Frame length, base machine: 5,500 mm (divisible frame for easier transport) (p. 6) Isdpfx Aszwgxrjb Iebb • Machine nominal width (bottom film): 355 mm (worldwide standard, easily available) (pp. 6, 23) • Top film width: 342 mm (pp. 2, 23) • Infeed path: Comfortable, knee-free infeed path of 1,125 mm (p. 6) • Power supply: 400 V / 50 Hz / 3 phases (p. 8) • ATTENTION: no compressor included! 🛠️ Tool & format data (4-cavity contour tool) The installed original tool provides a highly precise, visually appealing contour packaging (ergonomic oval/drop shape), ideal for premium products (p. 14): • Format layout: 4 lanes side by side / 1 row (pp. 13-14) • Actual cavity inner dimensions per cavity (L x W): 152 mm x 64 mm (pp. 14, 16) • Package outer dimensions (L x W): 185 mm x 82 mm (pp. 14, 23) • Package depth: 19.5 mm (mold plate type 5, directly water-cooled) (pp. 14-15) • Infeed / discharge length: 185 mm (pp. 13-14) ✨ Premium features & expensive optional extras (included!) • Integrated printer: MULTIVAC MR293 HP/TT in-line direct printing system with a fully integrated MULTIVAC TTO 10 thermal transfer printer (300 dpi) for printing logos, batch numbers, and expiration dates directly in the control system (pp. 19-20). • Integrated chiller: Rittal air/water heat exchanger in a stainless steel housing for self-contained tool cooling in a closed circuit (no external water connection required) (pp. 6, 11). • Automated discharge conveyor: High-quality Intralox discharge conveyor (800 mm) with a blue Intralox chain and its own frequency inverter for synchronous package transfer (p. 12). • Scrap film management: Original MULTIVAC RSW 20 edge strip winder with integrated tear-off control and winding drive for clean film disposal (p. 12). • Gas flushing device (MAP): Gas injection bars installed on the tool side for packaging under modified atmosphere are available. • Control system: Modern 12.1" color touchscreen terminal with HMI 2.0 user interface and IPC 06 control (Windows Embedded) (pp. 9-10). • Documentation: Operating manual, spare parts catalog, electrical and pneumatic wiring diagrams in German included in the scope of delivery (pp. 19-20). 💰 Price € 39,900,- net, excluding VAT. • Shipping costs: Available upon request, throughout Europe • Delivery time: Immediately available • Inspection and collection: possible at any time by appointment (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our general terms and conditions, all prices excl. VAT, ex wareh

Condition: used, Conical bottom Diameter: 1.500 x 1.500 = capacity 3.000 L total height: 2.800 mm Manhole diameter: 500 mm Pressure -1/3Bar Operating temp. 200°C Stainless steel 316L Motor SEW 0,9 kW-31 rpm/1,8 kW-64 rpm 400V Suitable for CIP Ibjdpfxozzazhj Ab Iob Suitable for direct steam injection Suitable for vacuum With agitator Switch cabinet not included Installation frame not included

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, total length: 1,500 mm, total width: 900 mm, total height: 1,400 mm, wall material: stainless steel, power: 32 kW (43.51 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 3 months, Tilting brewing kettle, Joni Optimix model, with agitator, 150-liter capacity. The unit has undergone a major overhaul. Isdpfx Abozqyv Ds Ijbb

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 15.2015.70.04.352, total length: 3,930 mm, table length: 2,000 mm, total width: 2,290 mm, table height: 1,300 mm, Wissner WITEC 2015 Eco milling machine for sale For sale: Wissner WITEC 2015 Eco CNC milling machine. A robust and precise milling machine from the German brand Wissner. This machine is suitable for a wide range of milling and machining operations and has been used in our production processes. The machine is being offered for sale due to the cessation of our business activities, making it available for purchase. Features: Brand: Wissner Type: WITEC 2015 Eco Serial number: 15.2025.70.04.352 CNC milling machine Robust industrial design Suitable for precise milling operations Year of manufacture: 2004 Includes: extraction system / vacuum pump / cooling system / tools / software / etc. The machine is currently still installed and can be viewed in working condition by appointment. Ibodpfxez A Azqe Ab Isb An interesting machine for companies looking to expand their production capacity or seeking a professional CNC milling machine or spare parts. If you have serious interest or questions about the machine, please feel free to contact us. Additional photos, videos, and technical information are available upon request.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, FOR SALE: JayCraft Cook Quench Chill System – High-Efficiency Food Processing Line Manufactured by JayCraft, this high-performance Cook Quench Chill (CQC) system is designed for fast, efficient, and consistent cooking, rinsing, and chilling of a wide range of food products. Built to the highest industry standards, this system is ideal for processors of pasta, rice, vegetables, pulses, and more. Product Overview: Manufacturer: JayCraft Food Machinery (UK) Function: Cook → Quench → Chill – continuous food processing system Application: Designed for precision cooking, starch removal, and rapid cooling Build: Heavy-duty stainless steel construction for hygiene and durability Condition: Excellent – factory-tested and ready for operation Key Features: Energy-efficient cooking and chilling Controlled temperature zones for optimal product consistency Iedpfoxc Ekkox Ab Isbb Integrated water management and filtration High-throughput design for increased production efficiency Easy access for cleaning and maintenance Compact footprint – suitable for a wide range of production facilities Ideal for Processing: Pasta (fresh, dried, or filled) Rice and grains Vegetables (peas, carrots, green beans, etc.) Pulses and legumes Noodles and more JayCraft Cook Quench Chill (CQC)

Condition: excellent (used), Year of construction: 2017, operating hours: 100 h, functionality: fully functional, Lamina GL 1400 Almost as new Year: 2017 Max size: 1400 x 2150 mm Min width: 70 mm Glue type: 2 guns with hot melt by Nordson Extras: 2 cold tape guns adhesive Very good condition Available immediately Ibedjwna R Eopfx Ab Iob Located: Europe Eastern

Condition: good (used), Year of construction: 1980, functionality: fully functional, Good working kaltenbach saw machine Gearbox has been overhauled Safety hood mounted Machine has been overhauled Installation and trade-in possible If interested, please call! Iedpjumb E Eefx Ab Iobb Kenta Industrial Tools and Service Ambachtsstraat 3 7951 ZA Staphorst

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, PASTEURIZER machine for sale. Manufacturer: Tomo Varga d.o.o. Year of manufacture: 2016. The machine is in working condition and ready for operation after reassembly. Detailed information about the machine: The pasteurization chamber reaches an operating temperature of 85 to 100°C. Batch filling in carts 850x900x1350 mm, which can be carried into the chamber with a forklift and stacked on top of each other. Pasteurization is done with direct steam. The flow of steam inside the chamber is directed by a 5 KW fan. Regulation of temperature and pasteurization time from 60 to 100°C. Wall and door insulation 150 mm thick. The chamber is made of stainless-steel sheet AIS I304. Capacity 1056 polypropylene bottles of 1.5 l. Iedpfjwp E Hnjx Ab Iobb The dimension of the whole machine is 270 x 300 cm It also has a smaller electrical cabinet but that can stand separate (see picture called external electric cabinet) Included with the device: 4X carts for inserting products into the chamber and an electrical cabinet with control panel (Touch screen) The device is disassembled for transport and can be viewed in this condition at the following location: Posavska ulica 59, 10372 Oborovo (Glazir d.o.o.). Working hours: Monday - Friday (from 08:00 to 14:00). For additional information, please contact via phone number listed or email for company GLAZIR d.o.o.

Condition: used, functionality: fully functional, Year of construction: 1976, control type: manual, degree of automation: manual, actuation type: electric, working width: 600 mm, sheet thickness (max.): 3 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness copper (max.): 3 mm, sheet thickness steel (max.): 3 mm, sheet thickness stainless steel (max.): 3 mm, power: 22 kW (29.91 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 5 bar, pressure (min.): 4 bar, pressure (max.): 5.5 bar, overall weight: 4,500 kg, total length: 3,000 mm, total width: 2,200 mm, total height: 1,800 mm, Equipment: centralized greasing system, MINO GIOVANI BATTISTA Circular Shears for Cutting Steel Sheets 600 mm x 3 mm – used Coil Slitting Line – MINO GIOVANI BATTISTA + Strip Straightener MINO GIOVANI BATTISTA Max. sheet thickness: 3 mm Max. cutting width: 600 mm Knife sets (more than 50 pieces) Inner coil diameter: 400–550 mm Outer diameter: up to 1,500 mm Ibedpfeyn Shzjx Ab Ieb Max. coil weight: up to 5 tons Decoiler and recoiler with spacers Technical Data Drive type: electric Working width: 600 mm Max. sheet thickness: 3 mm Max. steel thickness: 3 mm Power: 22 kW (29.91 HP) Connection voltage: 380 V Frequency: 50 Hz Total weight: 4,500 kg Total length: 3,000 mm Total width: 2,000 mm Total height: 1,800 mm Equipment • Centralized lubrication system • Pneumatic coil removal from decoiler • The machine is powered and currently installed in production Included Free of Charge Along with the circular shears, we provide a sheet metal cold rolling machine free of charge for achieving tight thickness tolerances. MINO GIOVANI BATTISTA – Rolling Machine Model: LAS Power: 6 kW Weight: 4,500 kg Cold rolling machine (for tight tolerances) Max. material width: 130 mm Max. material thickness: 3 mm Decoiler, belt-driven power transmission Prices Circular shears: EUR 11,000 Rolling machine: EUR 3,500 The rolling machine is included in the package at no extra charge, as it was used together with the line. Disassembly and loading costs: EUR 1,800 Delivery Terms Parity: EXW 10290 Zaprešić – Croatia Loading space length: 6 m Width: 2.2 m Total weight approx.: 9 tons Prices are net of VAT – reverse charge Delivery Time The machine is available 10–15 days after payment. The fixed loading date must be announced at least 7 days in advance for organizing forklift and crane.

Condition: used, completely stainless steel Suitable for direct steam injection (4 points at the bottom of the conical base) Operating temperature 125°C Operating pressure 2.5 bar Ibedpfxozzazzs Ab Isb Insulated (bottom + walls) Manhole DN500 Internal diameter 2,000 mm Boiler height with closed lid ± 3.000 mm Boiler height with open lid ± 4.150 mm Suitable for CIP Total volume of contents 4,840L Total dimensions: (L x W x H): ± 3.000 x 2.400 x 3.200 mm Hydraulically operated lid + Hydraulic unit in good condition electric control box not included

Condition: good (used), Year of construction: 2022, operating hours: 634 h, Manufacturer: Glass Model: VSM80F Year: 2022 Condition: Used Serial Number: 4396 Iodpfx Aey S Txqjb Isbb Stock Number: 3377 Capacity: 80 litres Infeed height: 950 mm Outfeed height: 870 mm Compressed air: 6 Bar Steam: 4 Bar, DN25 Power: 3 x 400V, 50Hz, 2.8kW Dimensions: 1400 x 2100 x 1650 mm Weight: 780 kg With double jacket and direct steam injection nozzles. Including temperature sensor and 10.4" touch screen. Only 634 hours, in new condition!

Year of construction: 2006, condition: used, Complete Automatic PET Edible Oil Bottling and Packaging Line – 8,000 Bottles/Hour Complete fully automatic production and packaging line for filling edible oil into 1.0 L PET bottles, with a production capacity of approximately 8,000 bottles per hour. Our asking price is EUR 520,000 net, ex works Shtip, North Macedonia. The price is negotiable, and we are open to considering reasonable offers. The line covers the complete production and packaging process, from PET preforms to finished automatically palletized products. The complete line includes: SIAPI EAS 50.100/8 – PET stretch blow moulding machine, 8 cavities Iodozmd Uijpfx Ab Isbb Bottle air conveyor and conveying system AVE Industries RVM 30/8 – filling and capping monoblock, 30 filling stations and 8 capping stations Nitrogen injection system Bottle conveyor system AVE Industries 8T H/M E1 – automatic labelling machine AVE Industries CP3-20 – automatic shrink wrapping / packaging machine with heat tunnel Conveyor systems AVE Industries PABR-80 – automatic palletizing system Main specifications: Application: Edible oil Bottle material: PET Bottle size: 1.0 L Line production capacity: approx. 8,000 bottles/hour Main equipment year of manufacture: 2006 Fully automatic production and packaging line The equipment is offered as a complete integrated production line for PET bottle blowing, edible oil filling, capping, labelling, shrink wrapping and automatic palletizing. The complete line is currently installed, in operation and fully functional. Interested buyers can inspect the line and see it running under actual production conditions by prior arrangement. The line is located in Shtip, North Macedonia. Additional technical documentation, photographs and videos of the equipment are available upon request. The complete line is offered for sale as one unit.

Condition: excellent (used), Year of construction: 2011, operating hours: 6,500 h, functionality: fully functional, machine/vehicle number: 52180, grinding length: 1,000 mm, grinding width: 750 mm, total height: 2,755 mm, total length: 3,840 mm, total width: 2,940 mm, workpiece weight (max.): 690 kg, grinding height: 410 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 1,600 m/min, feed rate Z-axis: 2,000 m/min, table length: 1,000 mm, table load: 690 kg, type of input current: three-phase, table width: 750 mm, grinding wheel width: 100 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 1,000 rpm, overall weight: 8,500 kg, grinding spindle motor power: 10 W, travel distance X-axis: 1,200 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, rotational speed (max.): 1,500 rpm, grinding spindle speed: 1,430 rpm, warranty duration: 12 months, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, Used Surface Grinding Machine ELB-Schliff Smart BL10 HYD Comfort Iodpfez Au I Sox Ab Iebb For sale is a used Smart BL10 HYD Comfort surface grinding machine from the manufacturer ELB-Schliff. Equipment: - Water tank with automatic paper band filter - Hydraulic unit with a hydraulic cooler - Mounted table dresser - MPM balancing device including integrated speed sensor, vibration sensor and power supply - Rail guidance in the Y and Z axes - X-axis is hydraulically controlled with V/flat guide Renewed and overhauled components: - Z-axis guides professionally re-scraped - Guide rails and guide carriages of the Z-axis renewed - The operating software (B&R) has been updated to the latest version The machine is in operating condition at our facility and can be inspected by appointment. A test run is also possible, so you can see the condition and working quality of the machine on site. We offer a 12-month warranty on the machine. Upon request, we also offer installation and commissioning of the machine, as well as training directly at your facility. Even after the purchase, we are happy to be your reliable contact for service, maintenance, and technical support regarding the machine.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 89257, saw blade diameter: 450 mm, cutting height (max.): 150 mm, cutting width (max.): 250 mm, type of input current: three-phase, year of last overhaul: 2024, table length: 25,000 mm, A woodworking company in Latvia is offering a Weinig Dimter OptiCut 304 L optimization cross-cutting line for sale. The machine has had only two owners, both of which are well-known companies in Latvia. We have operated the machine ourselves for the past 8 years. The reason for sale is the recent purchase of new Weinig equipment. Iedpez Arqksfx Ab Ijbb The machine is in full working order and is currently stored in a heated facility, ready for its next owner. The machine has only been operated on one shift. It is equipped with 5 sorting cylinders; however, the sorting conveyor can be extended, and additional sorting cylinders can be installed if required. The machine can be inspected and demonstrated in operation at our facility. Regular maintenance and repairs have been carried out throughout its service life to ensure maximum productivity, profitability, and high-quality optimization results. The machine operates with excellent accuracy. No modifications have been made to the original factory configuration. Spare parts have been regularly sourced from the official Weinig dealer in Latvia. The machine is available for inspection and testing in Kuldīga, Latvia. All original Weinig manufacturer documentation is available. Some spare parts are also available for this machine. We are also selling a Weinig finger-jointing line that was purchased together with this machine. Please see our separate advertisement for details. For further information, please contact us by phone or email, and I will provide all technical information, or additional images and videos can be made available.

Condition: good (used), There is 5 smokehouse ,cooking and intensive cooling unit. Ibedsz Atnkspfx Ab Iob

Condition: used, Year of construction: 2009, We offer for sale 5 professional FESSMANN cooking chambers designed for intensive use in meat processing plants. Each chamber holds 2 trolleys, ensuring high steaming efficiency. The chambers are equipped with NESS Digitronic 4 electronic controllers, allowing precise setting of temperature and time parameters. The stainless steel construction guarantees easy hygiene maintenance and a long service life. Technical specifications: Manufacturer: FESSMANN Year: 2009 Number of chambers: 5 Number of chambers trolleys: 2 trolleys Control: NESS Digitronic 4 Dimensions: Width 150 cm, Depth 220 cm, Height 240 cm Ijdpfx Aoxfizxjb Isbb Intended use: steaming meat products Condition: very good, used Construction: stainless steel The ideal solution for medium and large meat processing plants looking for reliable, high-efficiency steaming chambers.

Condition: used, all stainless steel water circulation net belt length ± 10.500 mm net belt width 900 mm adjustable speed lifting unit with electrical hoists dimensions (l x w x h): ± 11.500 x 1.600 x 4.000 mm Iedpfxjzxqrre Ab Isbb + "IGEFA" tube heat exchanger Type 161U-159-159 380 kW + Conveyor belt with flights belt width: 800 mm distance between flights: 190 mm height of flights: 50 mm

Condition: used, machine/vehicle number: -2022-, mileage: 1,00,300 km, power: 70 kW (95.17 HP), first registration: 07/2013, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, number of seats: 2, Get started right away with a professionally converted food truck on a reliable Mercedes-Benz chassis! This vehicle combines proven technology with a brand-new, unused catering kitchen manufactured to the highest quality and hygiene standards. Your advantages at a glance: 🚚 Immediately ready for use: including TÜV (German vehicle inspection) approval and complete expert report. 🛡️ Safety: 1-year warranty on the entire kitchen installation. 💳 Flexible financing: Attractive lease-to-own and leasing options available. 📑 All-inclusive package: We take care of the TÜV approval and expert report for you. 🛠️ Individually customizable: We will implement your desired equipment, different lengths, or additional serving hatches upon request. Vehicle data: Base / Model: Mercedes-Benz Food Truck / Mobile Food Unit First registration: 07/2013 Mileage: 100,300 km Engine & Transmission: 2,143 cc (70 kW / 95 hp), diesel, automatic transmission Environmental badge: Euro 5 (green badge – free access to environmental zones) Permissible total weight: 3,500 kg (can be driven with a standard car driver's license) Equipment: Rear parking assist, 2 seats, step for convenient entry Ijdpfeztadtsx Ab Ijbb GASTRONOMIC EQUIPMENT 🔥Professional gas appliances (brand: Bertos): Gas deep fryer "Bertos", 2 x 8-liter capacity, dimensions (W x D x H) 600 x 600 x 290, power: 13.2 kW, made of stainless steel, with drain valve, GL8+8B Gas stove "Bertos" with 4 burners, dimensions (W x D x H) 600 x 600 x 290, power: 12.4 kW, made of stainless steel, G6F4B Gas grill "Bertos", smooth plate, dimensions (W x D x H) 600 x 600 x 290, power: 8 kW, made of stainless steel, G6FL6B ❄️Refrigeration: Small under-counter refrigerator 💧Water system & hygiene: Water system with water canisters, 30-liter filling capacity with fresh and wastewater canisters Two stainless steel sinks with fittings Hygiene package consisting of a paper towel dispenser and a soap dispenser 10-liter hot water boiler Pump ⚡Lighting LED lighting on the ceiling LED lighting with color changing effect around the serving hatch with remote control Emergency light ✨Work area & safety Counter and work surfaces made of brushed stainless steel Insulating wall at the cooking area (fireproof) Exhaust hood made of labyrinth filters Non-slip floor for catering Splash guard optional Entry via step Visit us on-site and see the quality of our vehicles for yourself! Contact us now to arrange a viewing or a non-binding consultation.

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, tank capacity: 310 l, wall material: stainless steel, operating temperature: 220 °C, warranty duration: 6 months, Equipment: CE marking, Used FIREX Cucimax CBTG 310 Cooking/Frying Kettle Technical Data: - Gas heating, - Capacity – 310 litres, - Direct jacket heating with or without pressure cooking, - Agitator direction settings: LEFT/RIGHT and PAUSE - Cooking and frying vessel made of 12 mm AISI 304 stainless steel, - Counterbalanced gas spring lid made of AISI 304 stainless steel, - Removable lid for cleaning, - Easy service access, - Temperature control from 20° to 220° C, - Automatic mixing with PTFE scrapers, speed control, and reverse function, - Folio touchscreen control panel, - High-efficiency tubular burners for gas models, INCOLOY-800 alloy armored elements for electric models. Ibedpfx Abexnkdys Iob

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: CC41011401EJ, working width: 2,000 mm, cutting width (max.): 2,000 mm, cutting height (max.): 70 mm, Investronica CV040/070 automatic multi-ply cutting system, built February 2003 in Madrid. In working order. TECHNICAL DATA Manufacturer: Investronica Sistemas, Madrid (Spain) Model: CV040/070 Identification: LOOCC4.100V000.B0 Serial number: CC41011401EJ Date of manufacture: February 2003 Useful cutting width: 2,000 mm Cutting height: 70 mm compressed fabric Cutting window: 2,200 mm, continuous length with conveyor belt Vacuum system: high-efficiency vacuum generation, integrated module Feed: automatic advance system Sharpening: automatic blade sharpener on the cutting head Blade speed: variable control Table: evacuation table with conveyor belt Approximate weight: 3,000 - 4,000 kg, to be confirmed on dismantling EQUIPMENT INCLUDED 1. Investronica CV040/070 automatic cutting table with cutting head, blade sharpener, integrated vacuum module and evacuation table with conveyor belt. 2. Control station built into the machine, with monitor, keyboard and computer. 3. Investronica P2000 pattern plotter. The machine is installed and running in Seville. It can be seen and tested in operation by appointment. Machine owned by the seller, free of encumbrances. Iedjz Atvuspfx Ab Isbb

Condition: refurbished (used), Year of construction: 2010, tank capacity: 60 l, Joni cooking vessel Iodjxvy Udspfx Ab Iebb Capacity 50 / 60 litres Heated by own steam generator Discharge by tap and / or tipping