Used Emmegi Horizontal Machining Center for sale (70,271)

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller model: Fanuc MSX-516, rotational speed (max.): 12,000 rpm, The P8 power supply, valued at €1,500, was only replaced in August 2024! The spindle was repaired in 2017 and has mostly only been used for single-layer operation since then! TECHNICAL DETAILS Travel range X-axis: 630 mm Travel range Y-axis: 600 mm Travel range Z-axis: 650 mm Feed length X-axis: 630 mm Feed length Y-axis: 600 mm Feed length Z-axis: 650 mm Table width: 500 mm Table length: 500 mm Number of pallets: 2 Maximum speed: 12,000 rpm Number of tool magazine slots: 60 (BT40) MACHINE DETAILS Control: Fanuc MSX-516 Phases: 3 Frequency: 50 Hz Voltage: AC 200 V Full load current: 181 A Note: The rapid traverse rate of the X-axis is reduced by 20% to extend the service life of the telescopic guides. The sealing ring during pallet changes is likely defective. The seller temporarily resolved this by inserting a ball valve in between when the pallets needed to be changed. Credpfx Afozcuyio Asd EQUIPMENT Documentation/Manual Chip conveyor

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller model: FANUC 160is-MB, spindle speed (max.): 12,000 rpm, Submitting a bid obligates you to collect the item within the timeframe of calendar week 29 (July 13 - July 19, 2026)! TECHNICAL DETAILS Travel in X-axis: 560 mm Travel in Y-axis: 510 mm Travel in Z-axis: 560 mm Table length: 400 mm Table width: 400 mm Spindle and Feed Distance between spindle nose and table: 150 - 710 mm Spindle speed: stepless Spindle speed from: 100 rpm Spindle speed to: 12,000 rpm Maximum torque: 150 Nm Working feed rate: 1 - 40 m/min Rapid traverse rate: 40 m/min Workpiece data Max. workpiece length: 620 mm Max. workpiece width: 620 mm Max. workpiece height: 700 mm Max. workpiece weight on the table: 400 kg Pallet changer Csdpfxey Uy H He Af Asrd Pallet station: 2 pallets Number of pallets: 8 Tool magazine Number of tool positions: 60 Tool diameter: 82 mm Diameter with available adjacent positions: 140 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Tool change time: 1 s Average chip-to-chip time: 3.4 s Tool holder: ISO 40 MACHINE DETAILS Control: FANUC 160is-MB Coolant system: 400 l Coolant through the spindle (IKZ): 20 bar Dimensions (L x W x H): 2,100 x 3,955 x 2,844 mm EQUIPMENT Chip conveyor NC rotary table Coolant/mist extraction Status indicator

Condition: used, Year of construction: 1995, Fanuc MSC 516 2 pallets, 500x500mm BT40 spindle Spindle speed: 12,000 RPM Credpfozgrzkex Af Asd 20-tool changer Coolant pressure: 20 bar Renishaw

Condition: excellent (used), Year of construction: 2011, feed length X-axis: 813 mm, feed length Y-axis: 508 mm, feed length Z-axis: 711 mm, HAAS EC-500 Horizontal Machining Center Manufacturer: HAAS Automation Model: EC-500 Year of Manufacture: 2011 Control System: HAAS CNC Country of Origin: USA Machine Description HAAS EC-500 Horizontal Machining Center in very good technical and visual condition. The machine is equipped with a dual pallet changer and a 4th-axis rotary table, enabling efficient multi-sided machining in a single setup. Ideal for precision machining and high-volume production. Technical Specifications * X-axis travel: 813 mm * Y-axis travel: 635 mm * Z-axis travel: 711 mm * Pallet size: 500 x 500 mm * Number of pallets: 2 * Automatic pallet changer * Maximum workpiece diameter: 750 mm * Maximum workpiece height: 927 mm * Maximum pallet load: 400 kg * Spindle speed: 8,100 rpm * Spindle power: 22.4 kW * Spindle taper: BT40 / CT40 * Inline Direct Drive spindle * Tool magazine capacity: 30 tools * Tool-to-tool change time: 2.8 sec * Coolant tank capacity: 360 L * CNC Control: HAAS * Number of axes: 4 Equipment * Dual pallet changer * Rotary 4th axis (B-axis) * Tool holders included * Chip conveyor * Coolant system * HAAS CNC Control Condition The machine is in good working condition and can be inspected under power. Test run available upon request. Included in the Price * Tool holders visible in the photos Crjdpfx Afeza Ucrs Aed * Machine loading included in the price

Condition: excellent (used), Year of construction: 2005, x-travel 630 mm y-travel 600 mm z-travel 670 mm Control MSX 501 spindle turning speed - stepless 14000 U/min tool taper BT 40 pallet chang. with pallet turn. 360x1 degree 2 max. workpiece weight 500 kg tool change unit 60 fach table-size 500 x 500 mm Crsdpeygx D Tofx Af Ajd total power requirement 56 kW weight of the machine ca. 11,8 t dimensions of the machine ca. 5,8 x 3,6 x 3,0 m

Condition: used, Year of construction: 2012, Double-spindle machining centre with swivelling carrier for mounting clamping bridges Crsdpfjyw R Ndox Af Aed Traverse paths x-axis: 800 mm / y-axis: 900/1200 mm / z-axis: 650 mm Spindle distance: 800 mm Spindle speed up to 12,500 rpm Power 10% - 40% - 100% duty cycle = 42 / 35 / 28 kW Torque 10% - 40% - 100% duty cycle = 200 / 165 / 135 Nm Tool changer: 2 x 42 tool positions Tool holder: HSK 80 Rapid traverse: 120 m/min - CNC control Siemens 840 Dsl - Central coolant system

Condition: good (used), Year of construction: 1998, Used Kitamura machining centers Type: Mycenter 2X Yasnac CNC control Max. spindle speed: 10,000 rpm Excl. clamping on the table Tool holder: SK 40 X: 610 mm Y: 510 mm Csdpfsy U I H Isx Af Aerd Z: 510 mm Tool changer

Condition: used, Year of construction: 2014, - Machine available from: 2026-03-30 - Year: 2014 - Documentation available: Yes Cjdpfxox Hwhxe Af Aord - CE certificate present: Yes - Serial number: AA1/017825 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: SCM Maestro - Safety feature: Safety light curtain, Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: VTLF 2.250/0-791 - └ Year of manufacture: 2014 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 244 - └ Vacuum pressure [bar]: 200 - CNC options: Manual control - CNC documentation available: USB stick - Working range X [mm]: 5200 - Working range Y [mm]: 1550 - Z-axis working range [mm]: 160 - Installed length [mm]: 9000 - Installed width [mm]: 5000 - Installed height [mm]: 3100 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2018, operating hours: 1,850 h, total height: 2,200 mm, total length: 4,550 mm, total width: 2,200 mm, Colour: White Empty weight: 3.000 kg - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: Yes - Serial number: AH00000267 - Operating hours: 1850 - Number of milling spindles [pcs.]: 1 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - Saw unit present: Yes - Safety feature: Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Main motor power [kW]: 2.2 - └ Connection diameter [mm]: 33 - └ Oil free: Yes - Working range X [mm]: 3050 - Working range Y [mm]: 1250 - Z-axis working range [mm]: 130 - Installed length [mm]: 7000 - Installed width [mm]: 4000 - Installed height [mm]: 2400 - Transport dimensions: 4550mm x 2200mm x 2200mm (l x w x h) - Transport weight [kg]: 3000kg Cedpfx Aoy U Hmyjf Aerd - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, workpiece height (max.): 900 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 400 kg, total height: 2,800 mm, total length: 5,500 mm, total width: 3,500 mm, table width: 400 mm, table load: 400 kg, rotational speed (min.): 14,000 rpm, overall weight: 12,000 kg, spindle speed (max.): 14,000 rpm, coolant supply: 70 bar, spindle motor power: 18,500 W, spindle nose: BT 40, number of slots in tool magazine: 60, tool length: 400 mm, tool diameter: 140 mm, tool weight: 8,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Very well-maintained DMG MORI machine, complete with all documentation, available for inspection while powered on. - Table with 0.001° precision - 60 tool capacity - Chip conveyor - High-pressure system KNOLL 70 bar - Tool setting device Metral + - Fixed cycles - 48 zero-point offsets Credozdgcfopfx Af Aed - Coordinate system rotation - Fanuc 31iA control

Condition: new, Year of construction: 2025, The NQ50 is an efficient and precise horizontal machining center. It is suitable for machining a variety of materials and components in the automotive industry, tool and die making, and the IT sector. To meet production requirements regarding high precision, efficiency, and speed, an automated production line can be configured. The design concept of standardization, modularization, and universality provides the machine tool with outstanding technological advancement and future-proofing, offering excellent value for money. Features: - Compact structure with a small footprint - High rigidity, excellent dynamic characteristics, and superior precision retention - High-performance spindle for improved cutting capability and machining accuracy - Grease lubrication system for energy efficiency and environmental compatibility - Integrated automation interfaces - Cooling of the hollow ball screw on all three axes ensures high stability in serial parts production Travels: - X-axis travel: 730 mm Cjdpjw Rpgyefx Af Aord - Y-axis travel: 730 mm - Z-axis travel: 800 mm - Control: FANUC 0i - Spindle center–table surface: 80 – 810 mm - Spindle nose–table: 70 – 870 mm Table: - Table size: 500 x 500 mm - Max. workpiece weight: 500 kg - Pallet indexing: 1° x 360° - Pallet changer system: Rotary design - Number of pallets: 2 - Pallet change time: 1.4 sec Spindle: - Spindle type: Built-in spindle - Max. speed: 12,000 rpm - Spindle power: 18.5/37 kW - Spindle torque: 95.5/250 Nm - Spindle taper: BT40 - Pull stud: P40T-I-MAS403 Feed Drives: - Rapid traverse X/Y/Z: 60 m/min - Cutting feed X/Y/Z: 60 m/min Tool Magazine: - Capacity: 40 tools - Pull stud: P40T-I-MAS403 - Max. tool diameter: 80 mm - Max. tool diameter (adjacent slots free): 160 mm - Max. tool length: 500 mm - Max. tool weight: 12 kg - Tool-to-tool indexing: 1.5 sec Other Specifications: - Power supply: 45 kVA - Machine weight: 13 t - Installation area (LxWxH): 6450x3150x3250 mm Standard Configurations: - FANUC 0i control - 40-position tool changer (NQ80 60T) - 1° pallet indexing (except HQ100D) - NC rotary table 0.001° (NQ100D) - 40-tool changer - APC automatic pallet changer - Pneumatic and hydraulic lubrication system - Spindle oil cooler - Spindle blow-out system - Coolant system - Ball screw oil cooling - Guideway protection - Chip conveyor, chain type - Three-color signal tower, work light - Automatic shutdown - Self-diagnosis system - Full enclosure - Standard accessories: - Tool box - CE Options: - SIEMENS 828D control - 0.001° pallet indexing (standard on NQ100D) - T-slot table - CTS (coolant through spindle) pressure boost 20/30/70 bar - Control cabinet air conditioning unit - Linear scales - Workpiece measurement - Air blow pistol - Niagara rinsing

Condition: used, Year of construction: 2004, operating hours: 19,357 h, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: Siemens 810 D, total length: 6,500 mm, total width: 3,500 mm, overall weight: 9,000 kg, spindle speed (max.): 9,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a 4-axis vertical machining center from Unisign, model Univers 4, year of manufacture 2004. The machine is used but in good condition, fully functional, and has been regularly maintained. Special feature: second milling spindle (replacement spindle included). Operating hours: 19,357 Technical Data -Traverse paths: X = 1600 mm / Y = 400 mm / Z = 400 mm -B axis: A axis (360° x 0.001°) 20 rpm -Spindle speed: 0 – 9000 rpm -Control: Siemens Sinumerik 810D -Table size: 1 bridge with 4 sides, L 1800 mm, 4 x 113 mm Codpex Iputsfx Af Ajrd -Table load capacity: approx. 150 kg -Working feed rate: 5 – 28,000 mm/min -Rapid traverse (X/Y/Z): 28,000 mm/min Tool & Magazine -Tool holder: DIN 69871-SK40 -Chain magazine with 44 stations -Tool diameter: approx. 70 mm (up to 200 mm with free adjacent slots) -Max. tool length: approx. 240 mm -Max. tool weight: 5 kg -Max. total weight of tool magazine: approx. 200 kg -Tool change time: approx. 8 sec Machine Requirements & Dimensions -Total power requirement: 14 kW -Machine weight: approx. 9000 kg -Footprint (LxW): approx. 6.5 x 3.5 m Equipment & Accessories -Coolant system (approx. 480 L, internal & external emulsion) -Clefil RBF-E100 20 bar pump unit -Chip conveyor -Rinse gun in machining area -Hydraulic/pneumatic clamping options in machining area -Enclosed work area cover in accordance with safety regulations (UVV) -Röhmheld hydraulic aggregate (max. 500 bar) -Automatic probe RWP20.00 -Various SK40 holders -Technical documentation & floor plan available Maintenance -Regular maintenance performed -Hydraulic and pneumatic hoses partially renewed -LT module replaced in control cabinet The machine is immediately available and ready for operation. If interested or if you have any questions, please get in touch! All information provided to the best of our knowledge and belief. Subject to change, error, and prior sale.

Condition: good (used), Year of construction: 2009, Traverses XYZ 850 x 700 x 750 mm, Pallet size 500 x 500mm, pallet load 500 kgs, 60 ATC, Crsdpswq Iwxjfx Af Aod BT40 spindle taper, Fanuc 31i- control. Spindle power 22Kw, B axis 0.001 Degrees, 14000 rpm spindle, swarf conveyor, Through Spindle Coolant.

Condition: used, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 800 mm, controller model: Fanuc 6M, spindle motor power: 15 W, Technical Specifications Manufacturer: OKK Model: MCH-800 Year: 1989 Axis Travels (X/Y/Z) X-axis: 2006 mm Y-axis: 1000 mm Z-axis: 800 mm Table & Rotary Index Table Table size: 2202 × 800 mm Rotary indexing table: 800 × 800 mm Table load capacity: - Indexing load: 1,500 kg - Flat load: 3,000 kg Spindle Speed range: 30 – 3,000 rpm Taper: BT50 Main motor power: 15 / 11 kW (20 / 15 HP equivalent) Equipment - 50-station Automatic Tool Changer (ATC) - FANUC 6M CNC control - Extremely rigid Japanese construction - Large travels and robust rotary table Hsbnjxyzzyoz T Rm Don Crsdpfxjxyzzye Af Asd Weight Total machine weight: 16,500 kg Column: 8,500 kg Table section: 8,000 kg Description This OKK MCH-800 is a classic Japanese horizontal machining center from the era when OKK machines were engineered for maximum rigidity and long-term mechanical reliability. Featuring a BT50 spindle, generous travel dimensions, and an 800 mm rotary table, it is particularly suitable for machining steel components, heavy-duty roughing, and demanding production cycles. The Fanuc 11M control is reliable, easy to maintain, and still fully supported with spare parts.

Condition: used, Year of construction: 2015, Twin-spindle machining center – 4 axes Travels x/y/z = 400 x 500 x 425 mm 2 x swivel axes Tool magazine: 2 x 36 positions Crjdpeycqp Hjfx Af Aed Tool holder: HSK 63 Spindle speed up to 17,500 rpm Siemens 840D Chip conveyor Coolant system

Condition: good (used), Year of construction: 2006, 1 used 4-axis horizontal machining center Brand Haas Type EC 1600 Year of manufacture 2006 Travel ranges X-axis 1626 mm Y-axis 1270 mm Z-axis 813 mm Spindle centerline to table 304 mm Spindle SK 50 Max. rated power 22.4 kW Max. speed 7500 rpm Max. torque 460.0 Nm 700 rpm Table size Length 1626 mm Width 914 mm T-slot width 16.00 mm T-slot center-to-center distance 125 mm Number of T-slots in standard configuration: 7 Max. load capacity on table (evenly distributed) 4536 kg Integrated 4-axis (B-axis) Table 1626 mm x 813 mm mm Clamping surface diameter 762 mm Adjustability 360° Max. workpiece swing diameter 1270 mm Table load 4536.0 kg Max. rated power 3.7 kW Rotational torque (continuous) 2712 Nm Backlash 30 arc-sec Gear ratio 500:1 Braking torque 5423 Nm Minimum resolution 0.001° Indexing accuracy ± 30 arc-sec Repeatability 15 arc-sec Rapid traverse rate on B axis 36°/sec Max. feed rate for machining on B axis 36°/sec Spindle centerline to table 146 mm Max. feed rate for machining in x, y, and z axes 12.7 m/min Rapid traverse rate on X axis 15.2 m/min Rapid traverse rate on Y axis 15.2 m/min Rapid traverse at Z 15.2 m/min Axis motors 30-station tool changer Max. tool diameter (full) 102 mm Max. tool diameter (adjacent positions empty) 254 mm Max. tool length 508 mm Max. tool weight 13.6 kg Credpfx Afev N Di Aj Aed Tool-to-tool (average) 8.00 s Chip-to-chip (average) 12.60 s General information Coolant tank capacity 360 L Dimensions Domestic pallet 488 cm x 366 cm x 346 cm Export crate 488 cm x 366 cm x 348 cm Weight 13608.0 kg

Condition: used, Year of construction: 2007, x-travel 560 mm Crjdpfx Afewbi Ade Aed y-travel 560 mm z-travel 630 mm Control MSX 701 III MAPPS Max. rpm 14.000 min/-1 power capacity - main spindel 18,5 / 11 kW max. Torque 120 Nm tool taper MAS BT 40 distance spindle center to table 80 - 640 mm distance Spindlenose and center of table 100 - 730 mm numbers of pallets 2 size of pallet 400 x 400 mm max. workpiece weight 400 kg max. workpiecediameter 630 mm max. workpiece height 900 mm change time of pallets 6,0 sec b - axis 0,001 ° number of toolpositions 60 pos. tool taper MAS BT 40 max. tool diameter 70 / (140) mm max. tool length 400 mm max. tool weight 8,0 kg rapid traverse ( X / Y / Z ) 50 m/min feed speeds 0 - 50.000 mm/min Tipp feed 0 - 1.260 mm/min total power requirement 35 kVA weight of the machine ca. 9,8 t dimensions of the machine ca. 5,5 x 3,5 x 2,8 m CNC - Machiningcenter Horizontal MORI SEIKI - NH 4000 DCG - pallet-changer - Control options Program restart, cylindrical and spiral interpolation High-speed milling cycles, island and pocket milling cycles

Condition: good (used), Year of construction: 2019, operating hours: 19,000 h, functionality: fully functional, 2019 HELLER H6000 CNC Double-Pallet Horizontal Machining Center CNC horizontal machining center with double pallet Low operating hours, single-shift machine, excellent condition Manufacturer: HELLER Model: H6000 Year of manufacture: 2019 Machine type: CNC horizontal machining center Pallet system: Double pallet / 2-pallet system Serial number: MXXXXX (upon request) Pallet size: 630 x 630 mm Maximum pallet load: 1,000 kg Maximum workpiece height: 1,200 mm Travel distances: X-axis: 1,000 mm Y-axis: 1,000 mm Z-axis: 1,000 mm B-axis: 360° / 0.001° indexing Rapid traverse speeds: X-axis: 50,000 mm/min Y-axis: 50,000 mm/min Z-axis: 75,000 mm/min B-axis: 25 rpm Feed forces: X-axis / Y-axis: 15,000 N at 40% duty cycle Z-axis: 20,000 N at 40% duty cycle Spindle speed range: 5 – 6,000 rpm Spindle drive power: 60 kW at S6 / 40% duty cycle Maximum spindle torque: 2,292 Nm at S6 / 40% duty cycle Spindle taper: HSK 100A Automatic tool changer: 50 positions Maximum tool diameter: 280 mm Maximum tool length: 600 mm Codpfx Ajy S S Hysf Asrd Maximum tool weight: 25 kg Condition: The machine is in top condition, has low operating hours, and can be inspected immediately. The machine is available for short-term delivery.

Condition: used, Horizontal machining center with 2-fold shuttle table STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 M serial no. 34 year of construction 1988 Travel X: 500 mm, Y: 400 mm, Z: 320 mm Clamping surface, table surface 500 x 400 mm Tool holder ISO 40 Spindle speed max. 6300 rpm infinitely variable Main spindle drive 12 kW Mains connection 380 Volt, 50 Hz, 30 kVA - Tool changer with 24 tool positions - Changing table with 2 stations - Interface for data transfer Cedpfxeutuyij Af Ajrd - Coolant unit with chip conveyor Space requirement L x W x H 4100 x 2500 x 2650 mm Weight approx. 8 tons good condition Transport dimensions: Machine L x W x H 3200 x 2500 x 2650 mm, approx. 7.5 tons. Chip conveyor L x W x H 3500 x 1100 x 2100 mm, approx. 600 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, For technical data, see images.... Crjdpfxsy Tl N Rj Af Ajd

Condition: ready for operation (used), Year of construction: 2001, operating hours: 18,500 h, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, controller model: CNC OSP 100M, rotational speed (max.): 5,000 rpm, An optional tool package worth €10,000 can be purchased for €3,500! TECHNICAL DETAILS Travel range, X-axis: 700 mm Crsdpfoy S S U Djx Af Ajd Travel range, Y-axis: 800 mm Travel range, Z-axis: 700 mm Rotary table/B-axis: indexed in 1° steps, 360 positions Spindle speed: 25 - 5,000 rpm Type of input current: Three-phase Pallet size (2x): 500 mm x 500 mm Table size: 500 mm x 500 mm Table load: 800 kg Distance spindle nose to table surface: 150 mm - 850 mm Tool holder: MAS BT 50 Tool magazine (ATC): 60 positions, chain magazine Tool length max.: 450 mm MACHINE DETAILS Control: CNC OSP 100M Dimensions & Weight Dimensions (L x W x H): 5,500 mm x 3,160 mm x 3,300 mm Machine weight: 21,000 kg Spindle hours: 18,500 h EQUIPMENT Chip conveyor Coolant system Pocket filter system for internal cooling Spindle speed, continuously adjustable

Condition: used, Year of construction: 1976, functionality: fully functional, machine/vehicle number: 4218/ 12035, Axis height over bed: 1500 mm Speed: 0 - 315 rpm Range of diameters and length of drilling on one side:. Codswqk Umspfx Af Asrd D 35 – 45 mm L = 4000 mm D 46 – 65 mm L = 6000 mm D 66 – 85 mm L = 8000 mm D 86 – 105 mm L = 12,000 mm D 106 – 125 mm L = 16,000 mm D 126 – 200 mm L = 24,500 mm D 201 – 250 mm L = 24,500 mm D 251 – 555 mm L = 18,000 mm

Condition: defective spare-parts repository (used), Year of construction: 2002, operating hours: 34,188 h, functionality: not functional, machine/vehicle number: 18455, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, nominal power (apparent): 65 kVA, torque: 200 Nm, controller manufacturer: Siemens, workpiece height (max.): 750 mm, workpiece diameter (max.): 700 mm, workpiece weight (max.): 500 kg, total height: 2,700 mm, total length: 4,700 mm, total width: 3,400 mm, table width: 500 mm, table length: 400 mm, table load: 500 kg, rotational speed (max.): 25 rpm, overall weight: 12,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 2,801 h, number of spindles: 1, number of slots in tool magazine: 240, Equipment: chip conveyor, documentation/manual, For sale is a horizontal CNC machining center, HECKERT CWK 400 D. The machine is currently not functional and is therefore explicitly offered as defective / for spare parts / for refurbishment. Manufacturer: Starrag Heckert Type: CWK 400 D Control system: Siemens Sinumerik 840D Axes: 4 axes (X/Y/Z + B-axis) Pallet changer available Spindle with only 2,801 operating hours → very good basis for repair Pallet pool with a total of 23 pallets: 15 pallets with threads Cedpfx Ajzb Hfbef Asrd 8 pallets with grooves Machine is still connected to the power supply → inspection under power is possible Coolant system / chip conveyor / typical equipment available (machine-dependent) Immediately available Buyer is expected to dismantle the machine themselves Loading can be supported upon agreement Due to the condition, the sale is made without warranty or the possibility of return. Inspection is strongly recommended.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 669, travel distance X-axis: 560 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: MSC 502, rotational speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! Crsdpfjy R U Ecox Af Aed TECHNICAL DETAILS Travel X-axis: 560 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Distance spindle center to table: 50 – 650 mm Distance spindle nose to table center: 100 – 610 mm Main Spindle Max. speed: 12,000 rpm Drive power: 22 / 18.5 kW Tool holder: MAS BT-40 Spindle bearing diameter: 70 mm Pallet Changer Number of pallets: 2 Pallet size: 400 x 400 mm Max. workpiece diameter: 580 mm Max. workpiece height: 650 mm B-Axis Switching time 90°: 2.5 sec Pallet changeover time: 6.0 sec Tool Changer Number of tool positions: 60 Max. tool diameter: 80 mm Max. tool diameter with adjacent magazine slots free: 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool-to-tool change time: 1.5 sec Chip-to-chip change time: 3.7 sec Rapid traverse (X/Y/Z): 32 m/min Feed rate: 1 – 24,000 mm/min Jog feed rate: 0 – 1,260 mm/min MACHINE DETAILS CNC control: MSC 502 Total power requirement: 63 kVA Dimensions & Weight Footprint approx.: 5.5 x 4.5 x 2.7 m Machine weight approx.: 9.0 t EQUIPMENT Documentation Chip conveyor Cooling device High-pressure coolant system Internal coolant supply Tool magazine: 60 positions Pallet changer Pallets: 2 Signal lamp B-axis Hydraulic unit Spindle oil cooler Note: Shaft for loading must be provided by the buyer.

Condition: used, Year of construction: 2022, machine/vehicle number: 246/22, feed length X-axis: 2,000 mm, feed length Y-axis: 300 mm, feed length Z-axis: 300 mm, rotational speed (max.): 18,000 rpm, overall weight: 5,000 kg, Designation: Fanum TRIO SP 2W30 Weight: approx. 5,000 kg Number of spindles: 2 Axes: X-axis (width): 2,000 mm Y-axis (length): 300 mm Z-axis: 300 mm Spindle data Spindle type: ES789 Spindle power (S1/S6): 15 / 18 kW Max. speed: 18,000 rpm Spindle interface: HSK A63 Tool holder: ER32 / ER40 Credpsy H I Tlsfx Af Aod