Horizontal machining center

SW BAW08-22

Condition: excellent (used), Year of construction: 2020, operating hours: 23,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 120 m/min, rapid traverse Y-axis: 120 m/min, rapid traverse Z-axis: 120 m/min, torque: 80 Nm, controller manufacturer: Siemens, controller model: Sinumerik 840 D SL Solution Line mit NCU 730, workpiece diameter (max.): 1,830 mm, workpiece weight (max.): 800 kg, total height: 3,500 mm, total length: 5,900 mm, total width: 3,990 mm, overall weight: 24,500 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 17,500 rpm, operating hours of spindle: 8,000 h, Equipment: chip conveyor, Horizontal double swivel-beam machining center with 2 spindles - Linear and torque motors in the feed axes - Gantry drive for the Y-axis - Independent Z-axes and X-axes - Double swivel beam with two integrated rotary axes for loading and unloading parallel to main processing time - Siemens Sinumerik 840 D SL Solution Line control with NCU 730 - Oil distributor for NC rotary table - 1 set of clamping bridge supports - Torsion compensation Dedpfx Abow Hgk Aszoch - 5th axis directly driven twice - Boring head indexing - Base module for clamping hydraulics - Pneumatic pressure intensifier - Scraper belt conveyor - Automatic loading door - Emulsion mist extraction unit - Automatic rinsing cycle for loading area - Tool flatness monitoring - Position monitoring, base module and extension - Grating/walk-on grid - 24 quick-release couplings SW-ID No. 413288 - Tool breakage monitoring, inductive etc.

Condition: excellent (used), Year of construction: 2016, operating hours: 8,737 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Matec 30HV 3000x800x800 mm NC swing head +/- 105° swiveling Heidenhain TNC640 Handwheel Motor spindle 15,000 rpm / 30 kW / 198 Nm Tool holder HSK 63A 48 tool pockets ICS (internal coolant supply) 40 bar Belt filter system 450 liters Air through spindle Oil mist extraction (left and right) Partition wall for pendulum operation Side loading door Prepared for additional NC axis 3D triggering probe Renishaw RMP60 Tool breakage control (laser) Clamping hydraulics 100 bar / 10 l/min 2 x clamping circuits, clamping, releasing, manual and via M-function Robot interface The machine has very low operating hours and has always been perfectly maintained. The complete (maintenance) history is known to us. Dcedpfeyaa Sfjx Abzoh Tools and vices can be taken over if required.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1786, travel distance X-axis: 3,000 mm, travel distance Y-axis: 825 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: Sinumerik One, table load: 1,500 kg, rotary table diameter: 800 mm, rotational speed (min.): 25 rpm, spindle speed (min.): 20 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 20 bar, number of spindles: 1, tool length: 460 mm, tool diameter: 200 mm, tool weight: 10,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MATEC-30HV X = 3,000 mm Y = 825 mm Z = 1,100 mm / Horizontal Z = 975 mm / Vertical - 1-axis CNC swivel head Swivel radius 300 mm, maximum swivel angle +/- 105 degrees Direct path measuring system +/-3, optionally continuous or settable with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Bellows with steel lamellae - Direct path measuring system on X, Y, Z axis - Chip conveyor - Rinsing gun - Centralized oil lubrication - Work area lighting - Siemens Sinumerik ONE control Modern CNC system for highly productive machine tools, consisting of: NCU 1740 22" ITC2200 V3 display MCP 2200 machine control panel - Electronic handwheel (portable) HT2 - Telephone diagnostics / remote maintenance - Motor spindle 15,000 rpm Motor spindle with 30 kW (40% duty cycle) 17 kW (100% duty cycle) Torque 191 Nm (40% duty cycle) 108 Nm (100% duty cycle) - Internal coolant supply 20 bar Tank capacity of paper filter system 900 l Dcodpfexg Dhcsx Abzjh Filter capacity 160 l/min. - High-pressure coolant at external nozzles High-pressure coolant pump switchable via M-function in the part program to the external nozzles at the spindle head. #20 bar# - IK-compressed air through the tool - Partition wall for double-station system - 3D wireless probe - RTS table probe for measuring and inspection - UT-Tec collision monitoring - Automatic safety doors

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Distance from Spindle Nose to Table Centre: 550 - 1750mm Machine Dimensions: 5540 x 5930 x 4200mm Machine Weight: 29000kg Dcsdpexm Sxvjfx Abzjh Maximum Cutting Feedrate: 6m/minute Maximum Tool Diameter: 250mm Maximum Tool Length: 600mm Maximum Tool Weight: 30kg Maximum workpiece weight: 7000kg Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Spindle Speed: 3000rpm Swing: 2550mm Table Size: 1400 x 1600mm Tool Change Capacity: 60 Station Tool Size: BT50 Traverses XYZ: 2000 x 1500 x 1200mm W Axis: 500mm Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards.

Condition: used, Year of construction: 2006, x-travel 1.250 mm y-travel 1.000 mm z-travel 1.000 mm Control MillPlus B-axis (head) -10 - +180 x 0,001 ° C-axis (table) 360 x 0,001 ° feed X/Y/Z/-axis 20 - 10.000 mm/min rapid traverse X/Y/Z 60,00 m/min tool taper HSK 100 spindle turning speed - stepless 20 - 10.000 U/min power capacity at 100 % load 25,00 kW power capacity at 40 % load 38,00 KW max. torque at 40% / 100% load 288 / 187 Nm table surface area Ø 1.100 mm table load 1,50 t toolpiece magazine: chain magazine 120 Stück Dedpeyui Ncofx Abzech tool diameter 110 mm tool diameter with 2 vacant positions 230 mm tool length - max. 500 mm weight of tools max. 30,00 kg rotary table speeds infinitely variable 10 - 500 U/min total power requirement 85,00 kW weight of the machine ca. 25,00 t dimensions of the machine ca. 9,00 x 6,50 x H3,50m m 5-axis turning/milling machining center with MillPlus IT FD control; dual pallet changer; coolant system; coolant through the spindle; chip conveyor; rotating viewing window; electronic handwheel. Spindle new 10/2025 Turning-table overhaul 2022

Condition: good (used), Year of construction: 2008, Universal Machining Center Machine type: DMG HSC 75 linear Control: Heidenhain i-TNC530 Year of manufacture: 2008 New spindle: 2025 Power-on hours: 63,133 h Spindle operating hours: 28,596 h TECHNICAL DATA: Travel distances: X-axis: 750 mm Y-axis: 600 mm Z-axis: 560 mm Feed rate (X/Y/Z): 90 m/min Dcsdpfxoyq H Ars Abzoh Rapid traverse (X/Y/Z): 90 / 90 / 90 m/min A-axis: -10° B-axis: +110° C-axis: 360° Spindle speed range: 28,000 rpm Tool changer Tool holder: HSK-A63 Tool stations: 60 Tool diameter: 80 / 140 mm Tool length: 300 mm NC rotary table: Ø 750 mm Max. table load: 800 kg Table size: fixed table: 950 x 650 mm Max. table load: 1,000 kg Equipment features: Chip conveyor Internal coolant supply (IKZ): [bar] Oil mist extraction Tool breakage control: Blum Laser Measuring probe Mode of operation: 4 Electronic handwheel

Condition: excellent (used), Year of construction: 2001, turning length: 8,000 mm, turning diameter over bed slide: 2,000 mm, workpiece weight (max.): 25,000 kg, turning diameter over top slide: 1,550 mm, Swing over bed Ø: 2000mm Swing over cross slide Ø:1550mm DBC Turning Length: 8000mm Spindle bore: 150mm Spindle power: 95kW Bed width: 1400mm Tailstock spindle Ø: 260Ø Dcjdpfjxxxbzsx Abzeh Stroke pinole: 200mm Spindle taper: Metric 80Mk Workpiece weight: 25000 Power: 95A Speeds / ranges: 360Rpm Feed rate X-Axis: 0 - 6000mm/min. Feed rate Z-Axis: 0 - 6000mm/min. Length: 16000mm Width: 5000mm Height: 3800mm Weight: 80000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Steel bezel centre height 650 mm Clamping diameter 650 mm Dsdpfx Abjgzhbzjzjch height from base 1190 mm ges. Height can be optionally reduced by 100 mm and the centre height can also be reduced by 100 mm by unscrewing an intermediate plate. further details, see picture

Condition: good (used), Year of construction: 1999, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,150 mm, Fooke Endura Type 8. Year of manufacture 1999, Siemens 840 D Powerline control, X/Y/Z travel 3000/2500/1150 mm, Dcedpfx Aev N Uuvobzeh Bridge height 800 mm, 23 kW milling spindle, Forked milling head with 365° rotation axis, Swivel axis +/- 100°, Feed rates up to 15 m/min, Spindle speed up to 16,000 rpm, HSK A 63, Electric handwheel, Machine weight 50,000 kg

Condition: ready for operation (used), Year of construction: 2008, - USED - 5-AXIS BRIDGE-TYPE VERTICAL MACHINING CENTRE     Dcjdpfx Abewl R Ddozsh X-AXIS TRAVEL: 1750 mm Y-AXIS TRAVEL: 1400 mm Z-AXIS TRAVEL: 600 mm RAPID FEEDS X-Y-Z: 35 m/min SPINDLE: 18000 rpm; 18,5-25 kW; HSK A63 TABLE SIZE: 1000 x 1200 mm MAX ADMITTED LOAD: 5000 Kg TOOL MAGAZINE: A CATENA ; 30 POS HEAD: A/B AXIS AUTOMATIC CONTROL UNIT: HEIDENHAIN iTNC 530 WEIGHT: 18000 Kg OVERALL DIMENSIONS: 6000 x 4000 x 3850 mm ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL ; LASER TOOL SETTER