Used Garant Mm2 Cnc for sale (9,158)

Year of construction: 1974, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1293, CNC Radial Forging Machine GFM mod. SX-16 Manufacture: GFM (Austria) YOM: 1974 / 2022 Model: SXL-16 Machine number: 1293 PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM Numbers of Hammers: 4 Forging force: 800 Ton (200 t per Hammer) Strokes per minute: 580 Hammer length: 320 mm Maximum hammer setting scope - calculated by diameter: 100 mm Maximum diameter of forging regarding: - structural steel: circular cross section – Ø 160 mm square cross section – 130 mm - high alloy steel: circular cross section – Ø 120 mm square cross section – 100 mm Extreme quadrangle: 12 x 120 mm Maximum length of forging: 6000 mm Min and Max diameter of mounting in manipulator: 30 - 160 mm Feed of manipulator A: 6800 mm Feed of manipulator B: 7200 mm Passage through manipulator: Ø 130 mm Manipulators speed in fast move: 400 mm/s Feed speed of manipulators (stepless adjustment): 10 ÷ 115 mm/s Cooling water pressure: 3 ÷ 5 bar Temperature of inlet water: max. 30˚C Cooling water consumption: 34m3/h Pipe diameter for cooling water: 2” Compressed air pressure: min. 5 bar Pipe diameter for compressed air: Ø20 mm Consumption of compressed air: 1,5 Nm3/h Power supply (nominal power): 350 kW Motor voltage: 500 V Control voltage 220 V Power of main engine: 200 kW Power of pump motors: 185 kW Power of manipulators motors: 2 x 22 kW Iajdpfx Aeq U Sa Sonveu Dimensions of the machine Axis height of forging above the hall level: 750 mm Maximum height of machine above the hall level: 2.050 mm Maximum length of machine on the hall level: 33.740 mm Foundation length: 34.200 mm Maximum width of machine on hall level without loading equipment: 4350mm Foundation width: 15.600mm Machine net weight: 124.490 kg

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New control system PLC SIEMENS S7 Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Iasdeq U R T Nepfx Anvju Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Machine dimensions: Forging height over floor: 615 mm Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Tot. machine width (without auxliary equipments): approx 3885 mm Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, overall weight: 5,000 kg, We are offering this refurbished metal spinning machine UD320 CNC-Fanuc, fully overhauled in 2025. Iajdpjykmmkofx Anvsu This is a metal spinning machine that has been completely refurbished by us and equipped with a new, modern Fanuc CNC control system. We currently own a total of 9 of these machines. Five of these machines have already undergone a retrofit with the Fanuc control unit. The overhaul of other components such as bearings, guides, and slideways is carried out either in-house or through external contractors. We are very familiar with these machines. The hydraulic unit has been custom-built to our specifications. If you have any questions or need more information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2021, operating hours: 400 h, functionality: fully functional, machine/vehicle number: skyCNC 6008, travel distance X-axis: 900 mm, travel distance Y-axis: 6,100 mm, travel distance Z-axis: 270 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 8 m/min, workpiece length (max.): 6,000 mm, workpiece width (max.): 800 mm, workpiece diameter (max.): 270 mm, table width: 800 mm, table load: 400 kg, overall weight: 3,250 kg, spindle speed (min.): 15,000 rpm, X 900 Y 6100 Z 270 mm 11 kW (800 table) Available for immediate delivery! PFEIFER technology skyCNC Milling Machine 6008 – 11 kW / 5 ATC (As good as new, from 2021, only 400 operating hours) CNC Milling Machine – High-precision and powerful milling and drilling with extremely high speed and quality A 6-meter CNC milling machine with automatic tool changer, in mint condition, is offered for sale on behalf of a customer. The machine is available for immediate delivery and ready for operation at the customer's premises; the sale is due to the conversion to laser processing. The machine can be inspected with power at the customer's/seller's premises in 07819 Triptis. Key data: - Working/travel area (LxWxH): 6100 mm x 900 mm x 270 mm (clearance height under gantry 300 mm, max. tool length 300 mm) - Automatic 5-station tool changing system with ISO40 tool holder (optional 10 tool changing stations possible); includes 5x ISO40-ER32-75 tool holders and 5x ER32 collets - HPM minimum quantity lubrication/spray cooling for cooling the workpiece and tool, automatically controlled by a solenoid valve via M-code - T-slot table 6000 mm x 800 mm - Includes 3 HOMGE HBV-8-300 pneumatic quick-action vises; jaw width 200 mm, clamping force up to 8.0 t – continuously adjustable; high clamping accuracy; Patented pneumatic system - Central lubrication access points - Automatic tool length measurement - Mobile MPG control unit for quick and easy machine control, freely selectable workpiece zero points - Ethernet connection for data transfer via network, USB port - File formats: G-code, DIN ISO data - Incl. industrial computer system with 17" TFT touchscreen, PC keyboard, and mouse - HF milling spindle: HSD spindle ES951 A 1112 S / 11 kW, air-cooled; spindle speed: 3,000 - 15,000 rpm - Power supply: 3-phase AC 400 V / 50 Hz, power consumption: max. 15 kW - Dimensions (L x W x H): 6850 x 1440 x 2163 mm, weight: approx. 3250 kg - Compressed air connection: min. 7 bar, including air filter required Sale to commercial customers only! Iodpewlqpyjfx Anvsau Support and service provided by PFEIFER technology and Innovation Plauen

Condition: reconditioned (used), Year of construction: 2019, functionality: fully functional, type of input current: three-phase, total width: 2,450 mm, total length: 4,000 mm, input voltage: 400 V, input current: 32 A, feed length X-axis: 2,000 mm, feed length Y-axis: 1,800 mm, feed length Z-axis: 50 mm, working width: 1,700 mm, CUTTEC CNC Cutter Variocut with oscillating cutting tool, tool head with tangential axis. Cutting is performed on a cutting mat; material is fixed in place using a 7.5 kW vacuum system. Item location: 32105 Bad Salzuflen. Iaedoyi T Swopfx Anvou

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, For sale is a state-of-the-art CNC-controlled waterjet center consisting of 2 machines Machine 1: Robot with processing cell and integrated SERVO turning table. Machine 2: Robot with 2 processing cells and 2 integrated SERVO turning tables. This waterjet center is ideal for companies looking for a flexible and efficient solution for demanding cutting tasks. They are characterized by high precision, flexibility and reliability. - Robot arm NJ-16-3.1 Foundry: The robot has a load capacity of 16 kg and a working radius of 3100 mm. It is particularly robust and flexible, equipped with an IP65 protection class and is flange-mounted directly behind the cell. - SERVO turning table: With a maximum load of 500 kg and a faceplate center width of 2800 mm, the interpolating turning table offers maximum precision and repeatability. - Processing cell: The processing cell measures 2350 x 4500 mm and is equipped with sound insulation. - High-speed roller shutter: Integrated into the cell wall, the high-speed roller shutter ensures safe access and complies with Machinery Directive 2006/42/EC. - SL-VI 30 Plus high-pressure pump: This pump achieves a pressure of up to 4136 bar, ideal for precise cutting processes. - Water cutting head: The water cutting head is a central component of the system and offers maximum precision. It is equipped with a high-pressure line feed, a manual change system for quick replacement. Additional features: - CNC control: Siemens 840D controller with integrated PROFINET for controlling the robot and integrated S7 319 safety technology. - Cyclone separator: Efficient system for particle separation - Programming options: The robot is programmed using simulation software, machining takes place in the CAM system and the programs are transferred via G-code. Main features Rotary table cells: - Robot arm NJ-16-3.1 Foundry: This robot has a load capacity of 16 kg and a working radius of 3100 mm. With an IP65 protection class, it offers a high level of robustness and flexibility. - SERVO rotary tables: The system is equipped with two SERVO rotary tables, each with a load capacity of 500 kg. These rotary tables enable precise machining of large workpieces with a maximum component size of 1000 x 1000 x 1000 mm. The repeat accuracy is ±0.15 mm with a rotation of 180° in just 5 seconds. - Machining cell: The machining cells each have a size of 2350 x 4250 mm. - 2 high-speed roller shutters: Integrated into the front wall of each cell, the cold-resistant and antistatic high-speed roller doors ensure safe access to the processing cell. Iasdpeua U Tzjfx Anvsu The waterjet center offers outstanding processing flexibility and is suitable for various industrial PUR waterjet applications. Price on request or guide price < €300,000 Contact: For more information or to arrange a viewing appointment, please contact us on the telephone number provided.

Condition: ready for operation (used), Garant HC 1 Height Measuring Device Measuring range: 600mm Isdpfexv Ampsx Anveau Dimensions: 240mm x 250mm x 1000mm (L x W x H) Weight: approx. 30 kg Calibration standard is not included in the scope of delivery. For further technical data, please refer to the images. You are welcome to arrange a viewing appointment. We are happy to organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT identification number is supplied. Subject to prior sale. Visit our shop and browse our other listings. All brand names and trademarks mentioned are the property of their respective owners and are used for identification and descriptive purposes only. Technical data may vary and errors in the description of the item are possible and reserved.

Condition: ready for operation (used), Garant hexagonal workbench, multi-station work table Iajdpfx Aoxp Ec Henvsu 5 Garant tool cabinets 2 vises (Garant) Tabletop dimensions: approx. 2400mm x 2000mm (L x W) You are welcome to arrange an appointment for viewing. We can gladly organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers as well. The listed company names and trademarks are the property of their respective owners and are used solely for identification and description of the products. Technical data may vary and errors in the article description are excepted.

Condition: good (used), Garant oil cabinet 145x72x75cm Isdpfx Anjk Shv Heveau Design: Sturdy sheet steel construction with reinforced hinged doors, lockable by sliding handle with pin cylinder lock. The cabinet body is equipped with a single pull-out safety device. Due to the single pull-out safety device, only 1 pull-out shelf can be opened at a time. The cabinet is thus largely secured against tipping. Drawer shelves and drawers can be accommodated in 25 mm increments. Oil cabinet, equipped with plastic oil cans Drawer/extension shelf load capacity: 200 kg Drawer extension (partial/full extension): 100 % Drawer extension: Pull-out stop Height adjustment in increments: 25 mm pin cylinder lock: modular plug-in insert HxWxD=145x72x75cm without key Item condition used UVP 3240,- € Further switch cabinets - new and used - you will find in our store! International shipping costs on request!

Condition: good (used), Aluminium measuring table with 50 mm aluminium plate and drawer cabinet Type: Measuring table with aluminium measuring plate Iasdpfx Aehvmkisnvju Dimensions: 80 cm wide, 75 cm deep and 95 cm high (2.26 cm high with construction) Aluminium plate: 5 cm thick, with mounting threads Manufacturer drawer cabinet: Garant (Hoffmann Group) Number of drawers: 2 Material: aluminium Condition: used complete factory lock, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2015, operating hours: 43,196 h, functionality: fully functional, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, controller model: Fanuc 310 is, spindle speed (max.): 5,000 rpm, counter spindle speed (max.): 5,000 rpm, No minimum price – guaranteed sale to the highest bidder! CNC turning center with comprehensive accessories! A wide range of like-new spare parts is also available! TECHNICAL DETAILS Travel X1 axis: 165 mm Travel X2 axis: 165 mm Travel Y1 axis: 80 (+50 / -30) mm Travel Z1 axis: 678 mm Travel Z2 axis: 640 mm Travel W2 axis: 690 mm Rapid traverse X/Y/Z/W axis: 30 m/min Acceleration X/Y/Z/W axis: 5 m/s² Main and counter spindle Power main spindle: 20 / 25 kW Power counter spindle: 17 kW Speed main spindle max.: 5,000 rpm Speed counter spindle max.: 5,000 rpm Bar diameter main spindle max.: 65 mm Bar diameter counter spindle max.: 45 mm Number of turrets: 2 Number of rotating tools per station: 12 driven positions Tool system: VDI 30 Speed driven tools: max. 4,000 rpm MACHINE DETAILS Control: Fanuc 310 is Coolant tank capacity: approx. 650 l Coolant pump capacity per turret: max. 20 l/min Pump pressure: 7 bar Connected power: 91 kVA Dimensions & Weight Machine dimensions (L x W x H): 4,500 x 1,990 x 2,300 mm Machine weight: approx. 9,500 kg Operating hours Power-on hours: 64,274 h Operating hours: 43,196 h EQUIPMENT IEMCA MASTER 865 MP 43 L bar loader Drive for slides 1 and 2, all 12 positions Iodpfx Aoza Alhsnvsau C-axis for main and counter spindle Y-axis for slide 1 Chip conveyor, belt type Counter spindle collet cleaning with coolant Workpiece discharge including belt Mechanical preparation for oil mist filter Electrical and software interface for bar loader Angular synchronization between main and counter spindle Automatic machine shutdown 2 additional inputs/outputs, 4 M-functions Thread drilling without compensation chuck Piece and time counter Software for polygonal turning for slides 1 and 2 Constant cutting speed Helical interpolation for slide 1 Spindle speed monitoring Four-color warning light Cooling unit for control cabinet Collet chuck type MPF 65/140 without axial feed for main spindle, max. diameter 65 mm Manual collet changer type SACO MPT65/140 and MPF65/140 Differential pressure for counter spindle with the possibility of setting two different clamping pressures 1 set of soft jaws for collet chuck type SMW 175-BBD Collet chuck type SMW 175-BBD for counter spindle including adapter for spindle adjustment Tool wear monitoring system for CNC FANUC Sister tool selection system for Tool Monitor CNC FANUC External flushing of jaws and collets with coolant on main and counter spindle

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, turning diameter over cross slide: 75 mm, turning length: 325 mm, turning diameter: 180 mm, travel distance X-axis: 56 mm, travel distance Z-axis: 176 mm, TECHNICAL DETAILS Swinging diameter over bed: 180 mm Swinging diameter over cross slide: 75 mm Turning length: 325 mm Travel in X-axis: 56 mm Iaodpfx Aezb Ekcjnvou Travel in Z-axis: 176 mm Spindle speed range: 20 - 6,300 rpm Spindle bearing diameter in the front bearing: 50 mm Feed force in Z-direction max.: 3,000 N Spindle bore: 30 mm MACHINE DETAILS Control: Fanuc 21T Main spindle power max.: 3.7 kW Voltage: 400 V Frequency: 50-60 Hz Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,000 x 1,620 mm Machine weight approx.: 1 t EQUIPMENT Automatic chuck Various accessories Interface for bar feeder

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: W261, repeat accuracy: 0.05 mm, workpiece weight (max.): 6,300 kg, working length: 4,000 mm, working width: 2,250 mm, working height: 230 mm, No minimum price – guaranteed sale to the highest bidder! The machine’s last inspection was carried out by a specialist company at the end of 2025! The machine can be inspected while powered on. TECHNICAL DETAILS Working area X: 4,000 mm Working area Y: 2,250 mm Working area Z: 230 mm Working area for round part machining, diameter max.: 440 mm Working area for round part machining, length max.: 3,700 mm Number of cutting heads: 1 to 4 Cutting carriage distance: max. 1,150 mm Positioning speed, axis-parallel X, Y max.: 60 m/min Positioning speed, simultaneous max.: 84 m/min Cutting speed max.: 50 m/min Travel speed min.: 0.001 m/min Machine tolerance according to VDI/DGQ 3441: ± 0.1 mm/axis Repeatability: ± 0.05 mm/axis Load capacity of the frame max.: 7,000 kg Load capacity per grating bar: 110 kg Number of grating bars max.: 70 Workpiece weight, flat part max.: 6,300 kg Workpiece weight, round part max.: 500 kg MACHINE DETAILS Waterjet source: Bypump 50 APC Operating pressure: max. 3,800 bar Flow rate: 0 to 5 l/min Nozzle size in single-head operation: max. Ø 0.4 mm Nozzle size in dual-head operation: max. Ø 0.3 mm Nozzle size in dual-head operation: recommended Ø 0.28 mm Dimensions & Weight Machine dimensions (L x W x H): approx. 9,000 mm x 7,550 mm x 2,050 mm Weight: approx. 10,000 kg Operating Hours Operating hours: approx. 41,130 h Cutting hours Head 1 / Head 2: 13,720 h / 956 h EQUIPMENT CNC rotary axis Motorized cutting carriage distance adjustment Four-jaw chuck Abrasive hopper Spare parts Iaodpfezcwupex Anvju PC with pre-installed programming software Note: The second head has been removed, and the cutting mechanism has been mounted on Head 1 as a spare part. However, after acquiring a new cutting head, the system can operate with two abrasive tools. The drilling spindle is seized. The crane and lifting device are not included in the scope of sale.

Condition: ready for operation (used), Year of construction: 2007, pressing force: 28 t, stroke length: 200 mm, throat depth: 200 mm, installation height: 325 mm, working length: 835 mm, TECHNICAL DETAILS Pressing force: 28 t Bending length: 835 mm Travel range of the back gauge: 0 - 370 mm Stroke: 200 mm Iedpfx Aszdd Rgenvsau Distance between frames: 890 mm Support table: 200 x 275 mm Overhang: 200 mm Installation height: 325 mm Number of cylinders: 1 Working speed Pressing speed: 8-10 mm/s Retraction: max. 35 mm/s Positioning accuracy: +/- 0.05 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,500 x 2,200 mm Total weight: 3,500 kg EQUIPMENT Operating manual Safety device Mechanical tool clamping system (top)

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,808 h, functionality: fully functional, machine/vehicle number: NL257181158, turning length: 705 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, swing diameter over cross slide: 742 mm, swing diameter over bed slide: 920 mm, New auction due to buyer's payment default! TECHNICAL DETAILS Working Area Swinging diameter over bed max.: 920 mm Swinging diameter over cross slide max.: 742 mm Turning length max.: 705 mm Bar capacity: 80 mm X-axis travel: 260 mm Y-axis travel: 50 mm Z-axis travel: 795 mm Main Spindle Power: 18.5/15 kW Speed max.: 4,000 rpm Chuck size: 10 inches Spindle bore: 91 mm Front bearing diameter: 140 mm Counter Spindle Power: 11/7.5 kW Speed max.: 4,000 rpm Chuck size: 6 inches Spindle bore: 45 mm Front bearing diameter: 85 mm Turret and Axes Tool stations: 12 Arbor cross-section: 25 mm Speed of driven tools max.: 10,000 rpm Rapid traverse X-axis: 30,000 mm/min Rapid traverse Y-axis: 10,000 mm/min Rapid traverse Z-axis: 30,000 mm/min Rapid traverse B-axis: 30,000 mm/min MACHINE DETAILS Control: M730UM with CELOS Dimensions & Weight Machine height: 2,000 mm Footprint: 3,347 x 2,106 mm Weight: 5,820 kg Operating hours: 2,808 h Power-on hours: 11,311 h EQUIPMENT Y-axis Counter spindle Main spindle with 10-inch chuck Counter spindle with 6-inch chuck Chip conveyor Iodpfszck Txsx Anveau High-pressure coolant system Tool measuring device Parts catcher Workpiece ejector Interface for bar loader

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,683 h, functionality: fully functional, turning length: 1,524 mm, turning diameter: 820 mm, spindle speed (max.): 3,300 rpm, rapid traverse X-axis: 40 m/min, milling spindle speed (max.): 10,000 rpm, The following work was carried out on the machine: Repair/overhaul of the gearbox of the B-axis (2025) Complete maintenance (2025) Motor magazine renewed (2025) Replacement of the linear guides of the X and Y axes (2024) Renewal of the ball screws of the X and Y axes (2024) Repair of the milling spindle (2024) Including approximately 120 tools, SK 50 TECHNICAL DETAILS Turning length: 1,524 mm Iajdpezcwylefx Anvsu Turning diameter: 820 mm Travel range, X-axis: 870 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 1,598 mm Main spindle Spindle speed (max.): 3,300 rpm Drive power of main spindle: 30 kW / 22 kW Max. torque of main spindle: 588 Nm Spindle nose of main spindle: A2-11" Spindle bore: 104 mm Indexing: 0.0001 Counter spindle Spindle speed (max.): 3,300 rpm Drive power of counter spindle: 30 kW / 22 kW Max. torque of counter spindle: 588 Nm Spindle nose of counter spindle: A2-11" Indexing: 0.0001 Milling spindle Drive power of milling spindle: 37 kW Max. torque of milling spindle: 260 Nm Milling spindle speed range: 0-10,000 rpm Rapid traverse, X-axis: 40 m/min Rapid traverse, Y-axis: 40 m/min Rapid traverse, Z-axis: 40 m/min MACHINE DETAILS Control system: Mazatrol 640M PRO Tool holder: SK50 Number of tool positions: 120 Operating voltage: 400 V / 50 Hz Connected load: 104 kVA Required installation area (L x W): 7 x 3.5 m Operating hours: 60,683 h EQUIPMENT Approx. 120 tools, SK 50 Variable speed adjustment Tool magazine, 120 positions High-pressure coolant, 70 bar Renishaw probe (new in 2025) Laser measuring system for rotating tools Interface set Air/water cooling through the spindle Overload monitoring system Chip conveyor, Mayfran Consep 2000 Quick-change tool holder, SMW

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, turning length: 500 mm, turning diameter: 300 mm, spindle bore: 75 mm, spindle speed (max.): 3,800 rpm, controller model: OSP 5000L-G CNC-System, No minimum price – guaranteed sale to the highest bidder! Turning machine with integrated Okuma robot! TECHNICAL DETAILS Turning diameter over cross slide: 450 mm Turning length: 500 mm Turning diameter: 300 mm Spindle bore: 75 mm Spindle speed: 70 - 3,800 rpm Spindle power: 11 kW (30 min) / 7.5 kW continuous operation Travel X-axis: 400 mm Travel Z-axis: 500 mm Rapid traverse X-axis: 12 m/min Iajdpfxezc E Dfe Anvsu Rapid traverse Z-axis: 12 m/min Feed rate XZ: 12,000 mm/min Data transmission: RS232 Tool turret: 12 positions MACHINE DETAILS Control system: OSP 5000L-G CNC system Data transmission: RS232 Tool turret: 12 positions Power supply: 3 × 400 V Rated machine power: 21 kVA Maximum load current: 36 A Dimensions & Weight Dimensions (L (with chip conveyor) x W x H): 3,900 x 1,800 x 1,800 mm Machine weight: approx. 4,500 kg EQUIPMENT Integrated Okuma robot Automatic parts feeding Ideal for series and automated turning operations Stable and durable design

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 7402-09-03006-03, spindle bore: 90 mm, rotational speed (max.): 2,000 rpm, center width: 3,000 mm, center height: 325 mm, controller model: SIEMENS SINUMERIK 810D, TECHNICAL DETAILS Swinging diameter over bed: 630 mm Swinging diameter over carriage: 380 mm Center height: 325 mm Distance between centers: 3,000 mm Carriage overhang on bed: 700 mm Bed width: 520 mm Longitudinal travel X-axis: 355 mm Longitudinal travel Z-axis: 3,000 mm Tailstock spindle diameter: 100 mm Tailstock spindle travel: 180 mm Maximum workpiece weight between centers: 3,000 kg Maximum workpiece weight in cantilever mode: 500 kg Spindle bore: 90 mm Spindle mounting: DIN 55027/8 Spindle taper: 120 mm Front spindle bearing: 130 mm Main drive power 100% ED / 40% ED: 12 / 18.5 kW Maximum torque: 2,400 Nm Speed: 2–2000 rpm Speed ranges: 3 Range 1: 2–220 rpm Range 2: 50–660 rpm Range 3: 100–2000 rpm Speed control: 50–120 % MACHINE DETAILS Control system: SIEMENS SINUMERIK 810D Load display on screen: 0–140 % Main drive: 10 kW Power supply: 3 × 400 V / 50 Hz Dimensions & Weight Iajdpfx Aszc Hmnsnvou Dimensions (L (with chip conveyor) x W x H): 5,600 x 1,950 x 1,850 mm Machine weight: approx. 5,500 kg

Condition: good (used), Max. Roll dia: 1000 mm Max. Roll Length: 5260 mm Max. Roll weight: 16 Tonnes Control: Siemens 810 Iajdjq Dmkwspfx Anveu

Condition: used, Year of construction: 2013, turning diameter 110 mm turning length 450 mm control Siemens Iaodsyuzfvepfx Anveu weight of the machine ca. 9000 kg

Condition: excellent (used), Year of construction: 2023, operating hours: 1,294 h, functionality: fully functional, turning length: 550 mm, turning diameter: 390 mm, bar diameter (max.): 81 mm, DN SOLUTIONS DOOSAN PUMA GT2100B – YEAR 2023 🔹 Quantity: 2 Units 🔹 10” Chuck 🔹 Ø81 mm Spindle Bore 🔹 Max Turning Length: 550 mm Iasdpeyw Thijfx Anvsu 🔹 Max Turning Diameter: Ø390 mm 🔹 Box Guideways 🔹 Fanuc i PLUS Control Machine Details: • Machine 1: Cutting Hours 1294 (Equipped with programmable tailstock and tool presetter) • Machine 2: Cutting Hours 1230 (Without tool presetter) 📞 For detailed videos, photos, and additional technical information, please feel free to contact us. Let’s get in touch and discuss further. Contact: Muhammed Özkaya

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Shenzhen ICM Technology Development Co., Ltd., controller model: 880W02, pipe diameter (max.): 38 mm, pipe length (max.): 3 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 190 °, bending radius (max.): 200 mm, bending radius (min.): 2 mm, mandrel length: 150 mm, number of axes: 2, table length: 3 mm, overall weight: 1,300 kg, total length: 3,900 mm, total width: 900 mm, total height: 1,400 mm, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, oil tank capacity: 80 l, number of digital displays: 1, warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, quick-change device, Full Automatic Pipe Bending Machine DW38CNC-3A-1S Equipped with a touchscreen and CNC control system; capable of storing up to 500 sets of parameter groups. Features a rebound compensation setting program, with built-in confidentiality protection for programs and processing data. Servo control is adopted for corner bending, pipe bending and material feeding functions. The operating system is protected by passwords and physical keys, and supports production quantity & runtime records for efficient production management. Comes with slow bending and slow core pulling functions. Fault messages are displayed on the screen to help operators troubleshoot problems promptly. Touchscreen This pipe bender is equipped with a Weinview industrial touchscreen for its operation interface, which delivers an intuitive operation experience and allows new operators to get started quickly. You can directly edit the pipe bending process parameters on the interface, such as feeding distance, rotation angle and bending angle, and separately set the running speed for each step. During operation, the interface displays real-time axis positions, bending progress and production cycle, and automatically counts total output and shift output to help you manage production efficiency effectively. It also supports manual single-step debugging, automatic continuous operation, program editing and equipment parameter setting. Different modes can be switched with one click, making it convenient for machine trial runs and mass production alike. Hydraulic solenoid valve manifold This integrated hydraulic solenoid valve manifold serves as the control center of the CNC pipe bender's hydraulic system. Adopting industrial-grade modular design, it integrates multiple solenoid valves to independently control the movements of the feeding axis, rotating axis, bending axis, as well as clamping, auxiliary pushing and other auxiliary mechanisms. Linked with the CNC system, it converts control commands into precise hydraulic power output, enabling smooth operation throughout pipe feeding, rotation and forming. Matched with high-pressure sealed hydraulic hoses, it maintains zero leakage and high stability under full-load operating conditions, delivering reliable performance for long-term mass production. Servo drive These four units are Mitsubishi servo drives equipped on our pipe bender, acting as the power core that governs key movements including material feeding, pipe rotation and pipe bending. Adopting Mitsubishi MR-JE series industrial-grade high-end servo drives, they feature high positioning accuracy and fast response. Both feeding distance and rotating angle can be controlled precisely with no deviation. With excellent stability, they rarely lose steps or malfunction during long-hour continuous operation. This ensures consistent bending precision for every pipe and a high finished product yield. Iodpfsy Uuw Tox Anveau

Condition: new, Year of construction: 2026, functionality: fully functional, turning height: 2,300 mm, workpiece weight (max.): 12,000 kg, turning diameter over cross slide: 2,650 mm, turning diameter: 2,700 mm, faceplate diameter: 2,000 mm, total height: 7,100 mm, total width: 5,500 mm, total length: 8,500 mm, rotary table diameter: 2,000 mm, rotational speed (max.): 250 rpm, rotational speed (min.): 1 rpm, spindle speed (min.): 5 rpm, spindle speed (max.): 2,500 rpm, table load: 12,000 kg, table diameter: 2,000 mm, warranty duration: 24 months, overall weight: 63,000 kg, faceplate torque: 43,000 Nm, repeat accuracy: 0.015 mm, REM SCR 27 1SF — CNC Vertical Turning & Milling/Drilling Center 🔴 MACHINE CURRENTLY UNDER ASSEMBLY — DELIVERY MAX 3 MONTHS 🔴 24-MONTH WARRANTY — LONGEST IN ITS CLASS 🔴 UNBEATABLE PRICE FOR EUROPEAN CNC QUALITY ━━━━━ MACHINE HIGHLIGHTS ━━━━━ ✓ Complete turning + milling + drilling in ONE setup ✓ 12-Station ATC — bi-directional, 30 sec tool change ✓ Live spindle ISO 50 — 5 to 2,500 RPM | 37 kW ✓ C-Axis for full contour milling ✓ FANUC 0i-TF PLUS CNC — global support ✓ Heidenhain absolute measuring system (X: LC 195F) ✓ CE certified, full enclosure 3,300mm height ✓ Heavy-duty Meehanite cast iron structure ━━━━━ TECHNICAL SPECIFICATIONS ━━━━━ • Max Machining Diameter: 2,650 mm | Swing: 2,700 mm • Max Machining Height: 2,300 mm • Table Diameter: 2,000 mm (8 T-slots + 4 clamping jaws) • Max Workpiece Weight: 12,000 kg • Table Speed (turning): 1–250 RPM • Main Motor: 100 kW FANUC servo | Torque: 43,000 Nm • Ram Cross Section: 250×250 mm Ijdpfxjzb Ufve Anvoau • X/Z Rapid Feed: 10,000 mm/min | Feed: 0.02–6,000 mm/min • X/Z Thrust Force: 35,000 N • ATC: 12-station disc | Max tool Ø 300mm | L 400mm • Coolant: 2,000 L tank | External 10 bar | Through-spindle 40 bar • Chip Conveyor: SARIGÖL hinged, 500mm wide • Accuracy: ±0.020 mm/m | Repeatability: ±0.015 mm • Electrical: 400V/50Hz | 140 KVA | Fanuc 0i-TF PLUS • Weight: 63,000 kg | 8,500×5,500×7,100 mm ━━━━━ IDEAL APPLICATIONS ━━━━━ Large gear blanks | Ring gears | Wind energy hubs & rings Heavy castings & forgings | Oil & gas flanges Mining equipment components | Aerospace large parts ━━━━━ COMMERCIAL TERMS ━━━━━ Delivery: MAX 3 MONTHS from order Warranty: 24 MONTHS parts + labor Incoterms: EXW Bacău, Romania Payment: 50% advance + 50% before shipment Installation & commissioning: included Manufacturer: REM Bacău, Romania

Condition: like new (used), Year of construction: 2024, operating hours: 500 h, functionality: fully functional, DN Solutions PUMA 4100LMA Manufactured: November 2023 Only 550 hours of actual cutting time FANUC i Plus / iHMI control unit 12-station servo turret 8 live tools (driven tools) C-axis Programmable hydraulic tailstock Iaodpfx Anjzdarteveu Maximum turning diameter: Ø550 mm Maximum turning length: 2,060 mm Swing over bed: Ø790 mm Bar capacity: Ø102 mm Maximum workpiece weight: 500 kg X-axis travel: 352 mm Z-axis travel: 2,155 mm X-axis rapid traverse: 16 m/min Z-axis rapid traverse: 20 m/min 12-inch (315 mm) hydraulic chuck Spindle nose: ASA A2-11 Maximum spindle speed: 3,000 rpm Main motor power (continuous): 22 kW Main motor power (30 min rating): 37 kW Maximum spindle torque: 832 Nm Live tool speed: 4,000 rpm C-axis indexing increment: 0.001° Chip conveyor Chip bucket Automatic centralized lubrication system Coolant system Tool life management Spindle load monitoring Manual Pulse Generator (MPG) Working lamp Machine dimensions: 5,774 × 2,275 × 2,272 mm Machine weight: 11,050 kg

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, NAKAMURA-TOME SC-100X2 Technical Specifications L-Spindle (Main Spindle): Bar capacity Ø51 mm / 6,000 rpm R-Spindle (Sub Spindle): Bar capacity Ø42 mm / 6,000 rpm Machine Features: Two tools in cut (simultaneous machining with two tools) Lower turret + 2-axis machining on R-spindle Easy-to-use Superimposed Cycle Standard Equipment: Iasdoy A Exkepfx Anveu Milling and Y-axis are standard L-spindle motor: 11 / 7.5 kW R-spindle motor: 7.5 / 5.5 kW Milling motor: 7.1 / 2.2 kW / max. speed 6,000 rpm Lower turret equipped with manual unloading gripper Lubrication oil recovery system (standard specification) Environment-friendly inverter-type hydraulic unit