Used Gizelis 60 Tons X 3000 Mm for sale (1,02,373)

Condition: like new (used), Year of construction: 2022, machine/vehicle number: P 710, functionality: fully functional, power: 5.5 kW (7.48 HP), oil tank capacity: 120 l, overall weight: 6,500 kg, control type: CNC control, Machine is in as-new condition. Hfodeyvzkiepfx Afwoi The High Quality Press Brake (HQPB) represents the top model of the Placke range of press brakes. The entire manufacturing process, from hydraulic cylinders to control cabinet assembly, is performed in-house. By combining state-of-the-art technology with many years of expertise in forming technology, the HQPB series enables precision bending at the highest level. Even the standard configuration provides a fully functional press brake. This package of safety, reliability and efficiency, together with user-friendly operation, allows us to meet the highest demands and tolerances in the bending process. Machine Frame: - Base machine constructed from S 355 N steel - Side supports with 2 pressure pipes and an overhead oil tank, welded - Above-floor design - Coating (2-component structured lacquer), light grey (RAL 7035) and signal grey (RAL 7004) Upper Beam: - Press beam stress-relief annealed - Depth of stroke measurement, reading head guided by ball bearing rails - Separate Y1 and Y2 control, electronic monitoring of parallelism Hydraulic System: - Hydraulic proportional control valve with electronically monitored cylinder synchronization - Solid steel cylinders with inductively hardened piston rod - Low-noise internal gear pump Punch Clamping: - Upper tool holder system WILA, hydraulic clamping system, Type NSCL-II-HC, fully hardened, Maximum load: head bearing = 250 t/m, shoulder bearing = 300 t/m Lower Beam: - Narrow table incl. manual clamping strip, dimensions: 48 mm high, 70 mm wide - Reinforced lower beam. Mechanical crowning compensation is structurally unnecessary. - Single V-die holder (13x20) - Working height: 1050 mm (with 55 mm die height) Front Side of Machine: 2 aluminum support arms at the front, approx. 600 mm long, incl. 2 flip stops, measuring tape, and plastic wear strip. The support arms are adjustable via ball guides and height-adjustable from 55 mm to 100 mm die height using a slotted adjustment. The ball guide is milled into the lower beam. Control and Regulation Technology: - Operating voltage 400V / 3Ph / 50Hz - Switching and safety components by Telemecanique - Backgauge with AC servo technology - Pilz safety PLC Backgauge “2-axis control”: - X and R axes CNC-controlled - Z-axis manual Delem DA 66 Touch control panel on swivel arm. Safety devices in accordance with CE standard Technical Data and Working Range: Press force: 600 kN Working length: 1550 mm Distance between frames: 1200 mm Installation height: 400 mm Throat depth: 255 mm Ram stroke: 215 mm Ram Speeds: Rapid approach max. 280 mm/s Press speed max. 9.8 mm/s Return speed max. 170 mm/s Ram positioning accuracy: ± 0.01 mm Ram tilt: ± 10 mm Electronically limited to ± 5 mm Lower beam height above floor: 947 mm Motor power: 5.5 kW Main dimensions: Below-floor depth: 0 mm Pit depth for side frames: 0 mm Machine weight: approx. 6.5 t Tank capacity (hydraulic oil): 120 l (Specifications subject to change) Rear machine lighting: Work area illumination via LED light strip in the area between the side frames.

Condition: new, pressure: 60bending length: 1550column width: 1250daylight: 410stroke lenght (max.): 220column throat depth: 400messurements (LxWxH): 2445x2200x2390weight approx.: 4250motor power: 7,5 Standard equipment: KK Kletzer Europe We have put together a high-quality model for Europe. The CNC press brake KK-Industries made in Turkey. Model KKI EUROPE XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy and versatility. Europa XL has a very large installation height and, as a result, a large stroke (cylinder travel). The projection is also above average in order to restrict yourself as little as possible. Hfsdsd En R Djpfx Afwoi We rely on quality, which is also reflected in the management. As a standard control we have the high-quality Esa S640 (2D graphic control) Furthermore, the press brake KKI Europa XL is equipped with Y1, Y2, X via the control. We don't make any compromises when it comes to the upper tool and the die either the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is only as good as the service. For this reason we set our focus on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2 , X  Esa S640 (2D graphic control) Back gauge with double linear guide and ball screw 2 pieces of support arms in front, heavy version, height adjustment with hand wheel, from 175 tons heavy version on linear guide Laser safety device on the upper beam CE protective equipment various options available Option: r-Achse                                                                                   ¤ 5.375,-- Other controls: ESA 640 2D 15'' touch screen control                                     ¤ 4,520.00 inkl. ESA 675 W 3D 21'' touch screen control (Windows Base)      ¤ 6,485.00 DELEM 66 T 2D 17'' touch screen control (Windows Base)    ¤ 10,165.00 DELEM 69 T 3D 17'' touch screen control (Windows Base)     ¤ 16.350,00

Condition: used, sheet thickness: 6motor: 10messurements (LxWxH): 3750 x 1600 x 2450sheet length: 3050weight approx.: 4800 Description: Hydraulic Shearing Machine ATLANTIC ATS 3000 Used Machine - Sheet width: 3050 mm - Sheet thickness: 6.0 mm - Sheet thickness for stainless steel: 4.0 mm - Cutting angle: 0.5 - 3.0° - Hold-downs: 18 pieces - Stroke rate: 9 / 14 strokes/min - Rear gauge - adjustable: max. 750 mm - Control: Conventional - Motor power: 10.0 kW - Weight: 4800 kg - Dimensions L-W-H: 3750 x 1600 x 2450 mm - Condition: Well-maintained Features: - Electro-hydraulic / cam-guided sheet metal shear - Front control panel, left side - easy to operate Hfjdpfx Afju Uwyyswji - With electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the rear - Electro-motorized rear gauge 10-750 mm - With analog position indicator + handwheel for fine adjustment - 1x robust side stop - 1x movable footswitch - Front finger/entry guard - 2x emergency stop buttons at the front

Condition: used, Year of construction: 2000, greates pass round over bed 520 mm swing diameter over bed slide 480 mm turning length 3000 mm control 840 D SIEMENS number of tools 12 Driven tools - quantity 6 spindle bore 103 mm c-axis ja 0 Scope of delivery of the basic machine: SINUMERIK 840 D 3 controlled axes Rotation Ø over bed 520 mm Turning Ø over bed slide 480 mm Tool carrier with 12 cylindrical shank holders Ø 50 mm 1-stage AC main drive, 53 kW, 50 % ED Speed range 30 - 3000 min-¹ Main spindle head size 8 Clamping door for clamping devices chip conveyor THREE-DIMENSION 3000 mm 12 cylindrical shank holders DIN 69880-50x78 of which 6 positions can be equipped with driven tools, Power 6 kW at 60 % ED, Hfjdpfjwp S Sqex Afwsi speed range 20-2500 min-¹ 2 gear stages C-AXLE Speed range 0-20 min-¹ Max. Angle specification 9999.999° Working range according to work area diagram POWER CHUCK 3 NHF 315-82 A8 FABR. FORKARDT with centrifugal force compensation, Outer Ø 315 mm, bore Ø 82 mm, with hard top jaws, ground, rod material Ø max. 63 mm including draw tube and attachment

Condition: used, plate width 3000 mm plate depth 2000 mm plate height 230 mm weight of the machine ca. / t Clamping plate Dimensions: 3000 x 2000 x 230 mm Hfjdeud Iw Uopfx Afwsi T-slot dimensions: 42 x 72 x 74 (H) The images are for illustrative purposes only. More pictures will follow.

Condition: good (used), Offer 26038 Technical data approx.: - Plate length approx.: 3000 mm - Plate width approx.: 2500 mm Hedpfx Ajyc T Dtjfwofi - Plate height without base frame approx.: 350 mm - Plate height with base frame approx.: 870 mm - Top plate thickness approx.: 75 mm - 9 T-slots in table surface, length: 3000 mm - Center distance of T-slots in table surface each: 250 mm - Center distance of T-slots from outside edge: 125 mm - T-slot width approx.: mm - T-slot depth approx.: mm - Required space: L 3000 x W 2500 x H 870 mm - Weight approx.: 8000 kg

Condition: new, functionality: fully functional, Year of construction: 2026, Three rolls variable axis bending roll Make FACCIN, model HAV/S 3145 Technical specifications: Number of Reels: Three Geometry of the side rollers: variable Working width: 3000 mm Top roller diameter: 450 mm Hodpfjc S N Nqsx Afwjfi variable three-roller bending machine

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN 4HEP S54 Four roll bending machine Electronically controlled, electric drive, four-rolls bending machine Technical specifications: Number of Rolls: Four Geometry of the side rolls: planetary guide Working length: 3000 mm Top roll diameter: 300 mm lower roll diameter: 280 mm Side rolls diameter: 200 mm Guaranteed installed power: 10.8 kW Guaranteed maximum rolling speed: 5 m/min Guaranteed machine weight: 10,000 kg Length: 5,500mm Width: 1,400mm Height: 1,600mm Guaranteed services: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 18 mm Bending performance (full working width) 12 mm from pipe diameter 1500 mm Rolling capacity (full working width) 12 mm Hodpfoiivgrox Afwofi Bending capacity (full working width) 10 mm from pipe diameter 450 mm Standard equipment: Electrical drive of the top roll Planetary movement of the side rolls Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rollers for high wear protection cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Condition: new, functionality: fully functional, Year of construction: 2026, max rolling capacity (cold): mm. 32 max prebending capacity (cold): mm. 24 at diameter mm. 2050 with material yield strength N/mm2 260 working length: mm. 3050 number of rolls: four top roll diameter mm. 410 pinching roll diameter mm. 390 Hfsdpfx Aef T Rzfjfwei driven rolls : two rotation speed 5 m./min. rolls rotation: hydraulic installed power: 30 PS Voltage 400V, 50Hz, 3Ph Inkl.: - hardened & polished rolls - cone bending device - electronic rolls parallelism - Siemens PLC Control - CE certificate - control console on wheels

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN 4HEP 3135 Four roll bending machine Electronically controlled, hydraulic four-rolls bending machine Technical specifications: Number of Rolls: Four Geometry of the side rolls: planetary guide Working length: 3000 mm Top roll diameter: 350 mm Lower roll diameter: 330 mm Side rolls diameter: 250 mm Guaranteed installed power: 14.4 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 13,000 kg Length: 5,700mm Hsdpjiivc Defx Afwofi Width: 1,800mm Height: 2,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 20 mm Bending performance (full working width) 15 mm from pipe diameter 1750 mm Rolling capacity (full working width) 14mm Bending capacity (full working width) 12mm from pipe diameter 455 mm Standard equipment: planetary movement of the side rollers Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN 4HEP 3163 Four roll bending machine Electronically controlled, hydraulic four-rolls bending machine Technical specifications: Number of Rolls: Four Geometry of the side rollers: planetary guide Working length: 3000 mm Top roll diameter: 630 mm Lower roll diameter: 570 mm Side rolls diameter: 500 mm Guaranteed installed power: 72 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 58,000 kg Length: 6,800mm Width: 3,600mm Height: 3,550mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 70 mm Bending performance (full working width) 60 mm from pipe diameter 3150 mm Rolling capacity (full working width) 55 mm Bending capacity (full working width) 50 mm from pipe diameter 820 mm Hodeiivfqepfx Afwefi Standard equipment: Planetary movement of the side rolls Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN HAV 3162 variable three-rolls bending machine Electronically controlled, hydraulic three-rolls bending machine Technical specifications: Number of Rolls: Three Geometry of the side rolls: variable Working length: 3050 mm Top roll diameter: 620 mm Side rolls diameter: 550 mm Pressure force against the top roll: 630 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 55 kW (75 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 45,000 kg Length: 7,600mm Width: 3,700mm Height: 3,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 75 mm Bending performance (full working width) 48 mm from a pipe diameter of 3,100 mm Rolling capacity (full working width) 55 mm Bending performance (full working width) 40 mm from pipe diameter 805 mm Standard equipment: variable geometry with linear guides for rolls movement Extra long release arm for increased frame stability Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Hedpeiivgyjfx Afwofi Siemens S7-HMI PLC control PGS-CLASSIC control with Siemens touch panel Hitech hydraulic and electric package Simultaneous rotation and rolls movement Safety trip wire with emergency stop and CE certification central lubrication Water cooling for the hydraulics cone bending device Prepared for retrofitting supports and roller conveyors FACCIN Advantage Package AP

Condition: new, functionality: fully functional, Year of construction: 2026, 4 HEL 3128 Four rolls bending machine Electronically controlled, hydraulic four-rolls bending machine Make FACCIN, model 4 HEL 3128 Technical specifications: Number of Rolls: Four Geometry of the side rolls: linear guides Working width: 3050 mm Top roll diameter: 285 mm Lower roll diameter: 275 mm Side rolls diameter: 205 mm Certified rolls hardness: 950-1050 N/mm² Pressure force against the top roll: 150 tons Working pressure at maximum power: 190 bar Guaranteed installed power: 11 kW (15 hp) Guaranteed maximum rotation speed: 4-8 m/min Guaranteed machine weight: 9,000 kg Length: 5,450mm Width: 1,520mm Height: 1,450mm Hjdpfx Afeiink Sowsfi Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 12 mm Bending capacity (full working width) 8 mm from a pipe diameter of 1,425 mm Rolling capacity (full working width) 8 mm Bending performance (full working width) 6.5 mm from pipe diameter 370 mm Standard equipment: Double linear guide system for rolls movement Extremely wide bearing blocks MCS double bearing system for the rolls rotation Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7 PLC control Hitech hydraulic and electric package Safety trip wire with emergency stop and CE certification central lubrication cone bending device FACCIN AP package CNC control PGS-ULTRA

Condition: new, 3000 mm Working width 400 mm Wheel width 400 mm roll diameter 60 mm Hfsdpfjp S Ddfex Afwsi number of rolls 12 Stck. work height max. 810 - 910 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, overall weight: 11,800 kg, total length: 16,700 mm, load capacity: 10,000 kg, working height: 11,350 mm, lifting height: 11,350 mm, Equipment: documentation/manual, Demag overhead crane – Type: double-girder – Capacity: 2x 5,000 kg – Lifting height: 11.35 m – Year of manufacture: 2021 Hfodpfxsyvr Huo Afwoi – Hoist type: wire rope hoists – FEM/ISO hoists: 2m / M5 – Manufacturer: Demag / Siempelkamp Dimensions – Span: 16,700 mm (center-to-center) – Total length: 17,000 mm – Installation height: 1,600 mm – Width: 3,860 mm – Wheelbase: 3,150 mm – Suitable for crane rail: A55 / 50 x 30 mm – Net weight: 11,800 kg Speeds – Hoisting: 8/1.3 m/min – Trolley travel: 20/5 m/min – Crane travel: 40/10 m/min Features – Control: radio control – Crane manual available: yes – Electrical diagrams available: yes – Condition: in very good condition. – Disassembled: yes, available immediately – Special features: 8.5 ton Equator with carousel available as option

Condition: good (used), Technical details: Capacity: 3000 x 10 mm Hfedeyngctepfx Afwoi Further technical specifications to follow. Accessories: Various tools Condition: Overall in good and fully functional condition. The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: good (used), Hommel Dura measuring plate / control plate made of natural hard stone Hommel Dura measuring plate made of hard stone (granite plate) length: 3000 mm width: 1000 mm thickness: 300 mm 1 x T-slot Hjdpjk Shcuofx Afwjfi More measuring plates in other sizes - new and used - you will find in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, turning diameter over cross slide: 470 mm, turning length: 3,000 mm, turning diameter: 720 mm, spindle bore: 104 mm, CNC Lathe Geminis 4 Plus 720 x 3000 mm Description Manufacturer: Geminis Model: CNC 4 Plus Control: CNC Fagor 8055 FL-BT Capacities: Distance between centers: 3,000 mm Hfedowuligjpfx Afwoi Swing over bed: 720 mm Swing over cross slide: 470 mm Spindle bore: 104 mm Tailstock diameter: 100 mm (Morse 6 taper) Bed width: 550 mm Speeds: 2 speed ranges: 0–1600 rpm Rapid traverse: X-axis: 8 m/min Z-axis: 8 m/min Motor: Power: 22 kW Weight: 8,000 kg Equipment: CNC Fagor 8055 FL-BT 3-jaw SHUNK Rota-S Plus chuck Ø 315 mm Additional 3-jaw chuck Fixed steady rest Chip conveyor General condition: Lathe in excellent condition

Condition: good (used), Technical data for the shelving unit: Shelving system: SSI Schäfer Type: R 3000 Technical data for installation: Number of rows of shelves: 01 pcs. Shelf length: 1,056 mm Number of fields per row of shelves: 01 pcs. The scope of delivery includes: 02x shelf stands, used Material color: sendzimir galvanized Frame profile dimensions: 31 x 60 mm incl. bulkheads and base plates The stands are pre-assembled 2,278 mm high 400 mm deep 02x shelf, used Designation: ZB 4423 V Material color: sendzimir galvanized Dimensions: 994 x 400 x 30 mm Weight | piece: approx. 4.65 kg max. load per shelf 200 kg with uniform distributed load Hfodpevmp I Sefx Afwoi 01x base panel, used for floor length: 994 mm Material color: sendzimir galvanized Dimensions: C 28 x 22 x 8 x 0.6 mm Weight | Piece: approx. 0.51 kg 05x shelf traverse, 2nd choice (new goods) Material color: sendzimir galvanized Z-profile: 60 x 40 x 12 mm clear width: approx. 994 mm Hole grid: approx. 53 mm Agraffe: 3 HK (hooks) Weight | Piece: approx. 1.70 kg 15x compartment dividers, second choice (new goods) Material color: galvanized Type: APH 340 Total length: approx. 340 mm Usable length: approx. 315 mm Total width: approx. 100 mm Pipe diameter: approx. 12 mm Weight / piece: approx. 0.170 kg 01x cross brace, used Designation: KV31013 Material color: sendzimir galvanized Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this article is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Technical data for the shelving unit: Shelving system: SSI Schäfer Type: R 3000 Technical data for installation: Number of rows of shelves: 01 pcs. Shelf length: 1,056 mm Number of fields per row of shelves: 01 pcs. The scope of delivery includes: Hfodsvmxuhjpfx Afwoi 02x shelf stands, used Material color: sendzimir galvanized Frame profile dimensions: 31 x 60 mm Incl. bulkheads and base plates The stands are pre-assembled 2,494 mm high 400 mm deep 02x shelf, used Designation: ZB 4423 V Material color: sendzimir galvanized Dimensions: 994 x 400 x 30 mm Weight | piece: approx. 4.65 kg Max. load per shelf 200 kg with uniform distributed load 01x base panel, used for floor length: 994 mm Material color: sendzimir galvanized Dimensions: C 28 x 22 x 8 x 0.6 mm Weight | Piece: approx. 0.51 kg 05x shelf traverse, 2nd choice (new goods) Material color: sendzimir galvanized Z-profile: 60 x 40 x 12 mm clear width: approx. 994 mm Hole grid: approx. 53 mm Agraffe: 3 HK (hooks) Weight | Piece: approx. 1.70 kg 15x compartment dividers, second choice (new goods) Material color: galvanized Type: APH 340 Total length: approx. 340 mm Usable length: approx. 315 mm Total width: approx. 100 mm Pipe diameter: approx. 12 mm Weight / piece: approx. 0.170 kg 01x cross brace, used Designation: KV31013 Material color: sendzimir galvanized Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Technical data for the pallet rack beam: Racking system: Stow Type: Pal Rack NS The scope of delivery includes: 01x pallet rack beam, used Material color: RAL 2004 orange Box profile: 120 x 50 mm Beam type: PNB0442 Clasp: 4 HK (hooks) Clear width: approx. 3,600 mm Max. load per pair of beams 2,058 kg with evenly distributed load 02x safety pins, used Design: completely galvanized For securing the longitudinal beams against unintentional lifting out Hjdpfx Afswqc Rgowsfi Note: Some beams have 5-6 holes on the side. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any further transport or dispatch of this item will incur additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

Condition: good (used), Technical data for pallet rack beam: Racking system: Stow Type: Pal Rack NS Included in the delivery: 01x pallet rack beam, used Material color: RAL 2004 orange Box profile: 130 x 50 mm Hsdpfx Ajwp Hl Sjfwjfi Beam type: PNB0443|1.5 Bracket: 4 HK (hooks) Clear width: approx. 3,600 mm Max. load per pair of beams 2,417 kg with evenly distributed load 02x safety pins, used Version: fully galvanized For securing the cross beams against unintentional lifting out Your contacts in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the article: This item is only offered for collection. If transport or shipping of this item is desired, additional costs will be incurred, which can be requested from us separately depending on the delivery location and scope.

Condition: good (used), Technical data for pallet rack beam: Racking system: META Thyssen Included in delivery: 01x Pallet rack beam, used Material color: silver grey Beam type: HN 140|15 Hfjdpfsxaz N Rex Afwei Box profile: 140 x 50 mm Connector: 4 HK (hooks) Clear span: 3,600 mm Max. load per pair of beams: 3,000 kg with evenly distributed load 02x Safety pins, used Design: fully galvanized For securing the horizontal beams against accidental lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. If transport or shipping of this item is required, additional costs will be incurred, which can be provided upon request depending on the place of delivery and the scope of supply.

Condition: good (used), Technical data for pallet racking beam: Racking system: Bito Type: PRO Scope of delivery includes: 01x pallet racking beam, used Material colour: blue Beam type: PT170S Box profile: 170 x 50 mm Connector: 5 hooks (HK) Clear span: 3,600 mm Max. load per pair of beams: 4,000 kg, with evenly distributed load Hfodpfx Aex Hwl Rofwsi 02x safety pins, used Version: fully galvanized For securing the beams Against unintended lifting Note: The functionality of the beams is guaranteed despite the holes! The beams originate from a BITO project with heat shields that, according to the manufacturer, were bolted on! Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information on the item: This item is only offered for collection. Any transport or shipping beyond this can be arranged at additional costs, which can be quoted individually depending on place of delivery and scope of order.

Condition: good (used), Technical data for pallet rack beams: Racking system: META Thyssen Hodjy Akh Rspfx Afwefi Included in delivery: 01x pallet rack beam, used Color: yellow Beam type: HN 100|20 Box profile: 100 x 50 mm Connector: 3 HK (hooks) Clear width: 3,600 mm 02x safety pins, used Finish: fully galvanized For securing the cross beams against unintentional lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transportation or shipping of this item is required, this will incur additional costs, which can be requested from us separately depending on place of delivery or scope of order.