Used Bosch Eps 711 for sale (499)

Condition: new, Bosch VM 60-T supply module 1070077371-105 SN:002157251, unused, 100% functional, delivery as per photos Fedpfx Aex Eq Ayjdrsgf

Year of construction: 1999, condition: good (used), The machine has been produced in the late 1990's. Very little usage (it has been stored in a warehouse). Located in Tata, Hungary. No warranty. Fgedotw S Awjpfx Adref 1800 bar Cr pump with injector Test bench with 15 kW power, 12 measuring points, flow-through water cooling KMA flow meter system with 2 flow meters. The bench has a separate lubricating oil pump with lubricating oil supply Speed range from 0 to 4000 f/min. Equipment: - Bosch Cr pump control test in safety, protective cage - Bosch magnet coil injector testing, coding - optional testing of piezo injectors - option to repair and test CP2 pumps Testing and coding is performed using Bosch factory software and database. Bosch Esi subscription required The test bench is in good condition and has been operated with regular calibration. For sale due to site closure.

Condition: used, 2 items Fgodezrxnzspfx Adref as good as new

Condition: used, Technical data: - Piston diameter: 50 mm Fgedpfx Ajzrxm Dedrof - Stroke: 100 mm

Condition: used, Pneumatic valves suitable for WEINIG type UNIVAR 10 or similar Standard operation on both sides or spring-return Technical data: - Number: 27 Fgsdpfjzrxlaox Adref

Condition: ready for operation (used), Bosch adapter plate with sensor connection for Bosch SE-LB3.075.030-00.000 / rotary encoder ERN 221.2133-1000 motor, used, in good condition, 100% functional, scope of delivery as shown in the photos. Fgedpozr Dc Defx Adref

Condition: good (used), Year of construction: 1992, functionality: fully functional, Manufacturer: BOSCH Tip: SVZ 2500 A Maximum bag length: 400 mm Minimum bag length: 100 mm Maximum bag width: 250 mm Fgjdpfxerrv T Ie Adref Minimum bag width: 90 mm Maximum output: 80 bags/min

Condition: good (used), hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Manufacturer: Bosch, hydraulic pump -Type: Flange/shaft: see photo, square 8 x 17 mm Fgodpfjvwi E Ejx Adrsf -Number: 6x pumps available -Price: per piece -Dimensions: 100/92/H84 mm -Weight: 2.0 kg

Condition: new, functionality: fully functional, Bosch Rexroth R Runner Block CS Guide Carriage R182153210 (Size 55) – NEW in original packaging Description: For sale: new Bosch Rexroth R Runner Block CS guide carriages (roller guide carriages made of carbon steel). These high-quality components come from a stock clearance and are in perfect condition. Fgodpfjzkhvrjx Adrsf Technical data: • Manufacturer: Bosch Rexroth AG • Model number / Type: R182153210 (R Runner Block CS) • Series: R1821 (Narrow, normal, high R1821...2) • Size: 55 (Size 55) • Preload class: C3 (High preload) • Accuracy class: P (Precision accuracy level) • Seals: SS (Standard seal) • Material: Carbon steel • Condition: New • Date of manufacture (FD): 112 • Origin: Made in Germany (Schweinfurt) • Scope of delivery: 1 piece in original packaging including assembly instructions and accessories Special features & specifications: • High torque capacity and identical high load ratings in all four main load directions. • Maximum stiffness under load from all directions thanks to two additional fastening screw holes in the center of the roller guide carriage. • Corrosion-resistant coating (Resist CR, matte silver, hard chrome-plated) for maximum durability. • Universally combinable: All versions of the guide rails can be combined with all roller guide carriage variants of this series. Pickup and shipping: Pickup in Graz or shipping is possible. If you are interested, please contact us.

Condition: used, functionality: unexamined, Due to warehouse clearance, we are selling a total of 12-15 used machines/presses/workshop presses (see pictures, including those from Bosch). The machines are mounted on sturdy base frames/tables and are ideal for workshops, production, hobbyists, or for obtaining spare parts. Individual price: €60 per machine. Package price: If you purchase all 7 machines, you will receive an attractive package price! Condition: Used, as shown in the pictures (see photos). Upon request, transport and loading can be arranged for an additional fee, and we can organize transport throughout Europe. Prices exclude VAT. Fgedpezqtzmefx Adrof Inspection is possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange is possible! Machine purchase and sale WE BUY/SELL PRODUCTION & METALWORKING MACHINES, AMONG OTHERS. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website.

Condition: good (used), Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor Fgsdpfx Adsvwi Nqsrjf -Manufacturer: Bosch, hydraulic pump -Type: Flange/shaft: see photo, square 8 x 17 mm -Number: 4 pumps available -Price: per piece -Dimensions: 87/84/H100 mm -Weight: 1.9 kg

Condition: new, Bosch SPM 17 spindle module SN:345272, used, normal signs of wear, 100% functional, scope of delivery as shown in photos. Fjdpjx Eqy Esfx Adregf

Condition: new, I am offering for sale an original, high-voltage traction inverter by Bosch, intended for Volkswagen AG, with part number 95C 907 123 EM27. This is a development component (ETK – Entwicklungs-Test-Komponente) used during research and development work on electric drive systems. The unit comes directly from a Bosch/VW development project and is housed in its original Bosch transport case with foam padding. The package also includes the original transport documentation and high-voltage test and inspection reports, confirming that quality control has been carried out. Fgedszl H Hxopfx Adref The inverter is responsible for converting direct current from the high-voltage battery into three-phase alternating current to power the electric motor. It is one of the key components of an electric vehicle’s drive system. Technical specifications: Manufacturer: Bosch Project customer: Volkswagen AG OEM number: 95C 907 123 Version: 95C 907 123 EM27 Bosch number: 0437.B00.0LV-01 Development version: C1-Muster 600A ETK Country of manufacture: Germany Included in the set: Bosch high-voltage inverter Original Bosch transport case Foam transport protection Bosch transport documentation Test and quality control reports Condition: 100% technically functional. Very good visual condition. Complete with original documentation and transport case. Sold exactly as shown in the pictures.

Condition: ready for operation (used), Year of construction: 1975, A Bosch OBD 10/53L 12 and a Bosch OBD 15/54L 17 are available, strip width: 250mm, usable height: 260mm, number of furnace doors: 3, doors: inlet, intermediate and outlet door, strip speed: 1.8m/min, cycle time: 25min, cycle distance: 700mm, operating temperature of decarburizing zone: 760°C, operating temperature of bluing zone: 550°C, heating capacity of decarburizing zone: 84kW, heating capacity of bluing zone: 18kW, evaporator heating capacity: 3kW, evaporator water consumption: approx. 0.5l distilled water/h, energy consumption: approx. 45kWh/100kg net weight, total decarburizing time: 150min, cycle time: 25min, cycles in the decarburizing zone: 6, decarburizing zone temperature: 760°C, holding time: 30min, propane/air ratio for protective gas generation: 1:18, protective gas quantity: approx. 35Nm³/h, propane quantity: 2Nm³/h, air quantity: 36Nm³/h, combustion tower temperature: 1250°C, dew point or cooling water temperature of direct cooler: 23.5-25.5°C, total bluing time: 75min, cycles in the bluing zone: 3, bluing zone temperature: 550°C, holding time: 50min, evaporator temperature: 120°C, total connected load: 111kW, length: 14,200mm, width: 1650mm, height: 3000mm, with an Exogas Generator Gebrüder Hammer GmbH and documentation. An on-site inspection is possible. Fsdpfx Asztrbwedregf

Year of construction: 1979, operating hours: 500 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 123, We are selling a Bosch Höller 3 edge-sealing machine that underwent a general overhaul in 2022. The machine has been fully converted to servo drive and fitted with an S7 control system. Coloured or clear film is fed via a roller, folded into a bag measuring 11 cm wide by 15 cm high, and sealed. The grippers can be individually adjusted within the frame as required. Product feeding is via a screw feeder, which also operates fully electrically with all standard parameters. The machine is fully operational. Depending on the product to be filled, speeds of 40–60 bags per minute can be achieved. Fsdpfx Adsizag Torjgf

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 140563, power: 1,300 kW (1,767.51 HP), overall weight: 2,600 kg, total width: 1,424 mm, total length: 3,787 mm, total height: 2,402 mm, pressure: 6 bar, heating capacity: 1,300 kW (1,767.51 HP), fuel: domestic gas H, operating pressure: 6 bar, Equipment: hot water, Bosch Unimat UT-L 10 industrial low-pressure hot-water boiler, manufactured in April 2023. Technical data: - Manufacturer: Bosch Industriekessel Austria GmbH - Model: Unimat UT-L 10 - Year of manufacture: 2023 - Serial number: 140563 - Rated thermal capacity including ECO: 1,300 kW - Maximum allowable pressure: 6 bar - Hydraulic test pressure: 9.6 bar Fedpfx Adjzp Rmqsrsgf - Allowable temperature range: 0–110 °C - Total boiler volume: 1,370 litres - Approximate dimensions: 3,786 × 1,424 × 2,402 mm - Approximate net boiler weight: 2,600 kg - Heating medium: low-pressure hot water - Design: three-pass flame-tube/smoke-tube boiler - Flue/appliance classification: EN 1749, B23 - CE marking: CE 0085 - Manufactured in Austria - Type plate available The stated dimensions and weight are manufacturer reference values for the UT-L 10 boiler body. Actual dimensions and transport weight may vary depending on the installed burner, economiser, fittings and control equipment. Fuel type and electrical connection data must be taken from the installed burner and control-cabinet nameplates. The exact scope of supply, operating condition and included documentation should be confirmed before purchase. Sale subject to prior sale and verification of the technical information. Included equipment, as shown in the photographs: - Natural-gas regulating and supply line - Gas pressure regulator - Gas meter - Pressure gauge - Motorised Bosch valve actuator - Butterfly shut-off/control valves - Associated pipe sections, flanges, gaskets and mounting components The components are supplied dismantled. Completeness and suitability for the buyer’s installation must be verified before commissioning.

Condition: excellent (used), Year of construction: 2017, 1 used steam boiler Manufacturer: Bosch Type: U-MB 2020 Capacity: 2,000 kg/h Permissible operating pressure: 13.0 bar Increased test pressure: 24.1 bar Maximum temperature: 195°C Total volume: 2,065 l Year of manufacture: 01/2017 CE marking: CE 0036 Equipped with a Weishaupt gas burner, type WM-G20/3-A, 300-2,000 kW, ZM-LN design, 15-500 mbar, Fodpfx Aszltalodregf gas control system, separate control cabinet, Loos Boiler Control LBC boiler control system, feed water pump, Eco Type 1, capacity 89 kW, volume 41 liters, temperature 238°C, permissible operating pressure 31 bar, test overpressure 56 bar, and the existing coarse and fine fittings.

Condition: used, Working length: 4060mm The traveling trolley size: 650x1700mm Fgjdpfjyyhqdex Adrsf

Condition: used, Hydraulic Pump, Pump, Rexroth A2V 1000, Used Machine Manufacturer: Bosch Rexroth Type: A2V 1000 Overall dimensions: Width: 800 mm Depth: 850 mm Height: 730 mm Weight: 886 kg Design: Bent-axis, variable displacement type Nominal speed: 740 min⁻¹ Fgodpfxjy Nnmwo Adrjf Operating pressure: Up to 350–400 bar Country of origin: Germany Designed for long service life under continuous heavy-duty operation. Suitable for both open-loop and closed-loop hydraulic systems.

Condition: ready for operation (used), Varioflow conveyor Overall size: 3950x400x100 mm Power: 0,25 kW Speed: 6,5 m/min Fedpfogvvn Tox Adrogf

Condition: as good as new (ex-display), functionality: fully functional, Ferwood Code: RS0002839 - Manufacturer Code: R911309393 - Condition: As new (display item) - Functionality: Fully functional - Weight: 36KG - Dimensions: 80X35X33 - If interested we offer an overhaul service, please contact us. Fjdpfxevvavfs Adrsgf

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0001735 - Manufacturer Code: 822010640 - Condition: As new (display unit) - Functionality: Fully operational - Compatible machine: - If interested, we offer a reconditioning service; please contact us. 1KG 20X20X20 Fsdpoymd Nnsfx Adrogf

Condition: reconditioned (used), WOERNER or BOSCH lubricating oil pumps with 8 to 14 pump elements and oscillating drive, oil delivery rate individually adjustable for each pump element Fgedpfxsxl Aaue Adrsf

Condition: ready for operation (used), Bosch SD-B5.250.015-05.000, brushless, permanent magnet servo motor, serial number: 746000208. One connector is slightly damaged, see photo. Used, with normal signs of wear, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request separate quotes for packaging and shipping costs! Fgedji D E U Hepfx Adrjf

Condition: ready for operation (used), Bosch SD-B5.250.015-10.000, brushless, permanently excited servo motor, professionally and completely refurbished and tested, with a 12-month warranty, 100% functional. Scope of delivery as shown in the photos. The agreed sales discounts do not apply to this item. Please request the price separately! ATTENTION: Please enquire separately about the costs for packaging and shipping! Fjdpfei D E U Usx Adregf