Used Grecon Glue Application With Profile Rollers for sale (22,091)

Condition: used, Year of construction: 2020, Orangeworks Stainless Steel Mixer Tank Qty 2 in stock Capacity 500 LTS Load cells Mixer Bwjdpfx Aowq Sz Uebtst Ancillary equipment included

Condition: good (used), Floor weighing scale Bsdjx Hz Dqopfx Abtowt K-PZ Weigher indicator Type: KPZ 52E-9-1 Maximum weight: 300 kg Minimum weight: 2 kg, e=: 0.1 kg, T=- 300 kg Dimensions: 800 mm x 1100 mm x 100 mm Including ramp

Condition: new, New Conveyor with overhead feeder hopper Both units are mobile on castors Feeder hopper with opening end door, adjustable exit gate to conveyor Bwodpfjwd Nthsx Abtet Feeder hopper dimensions 800mm x 740mm x 600mm deep Conveyor belt dimensions 1800mm x 230mm W x 1260mm H Conveyor height is adjustable VFD on conveyor drive

Condition: used, Max. turning diameter: 650 mm Bjdpfjvk T S Aex Abtswt Min. turning diameter: 200 mm Max. turning length: 4000 mm Max. workpiece weight: 10 tons Center height: 400 mm Faceplate diameter: 650 mm Speed: 1 - 58.4 rpm Drive power: 45 HP Tailstock

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, operating hours: 3,704 h, machine/vehicle number: 32855, USED SAKAI TIRE ROLLER MODEL : T2 SERIAL :32855 YEAR : 2001 Bsdpfx Aozx Nw Hsbtewt HOUR 3704

Year of construction: 2026, condition: new, functionality: fully functional, A cement clinker grinding mill is a specialized equipment used to grind the hard nodular clinker into fine powder, which is cement. Most cement is currently ground in ball mills and also vertical roller mills, which are more effective than ball mills. Here are key features and information about cement clinker grinding mills: Bjdpfxoq Nfbhj Abtowt 1. Raw Materials: - The main raw material for making cement is clinker, which is produced by sintering limestone and clay. Other materials such as gypsum, fly ash, or slag may also be added during the grinding process to achieve specific properties. 2. Grinding Process: - The clinker and other additives are finely ground in the grinding mill to produce cement. The grinding process is a crucial step in cement production and contributes significantly to the final quality of the product. 3. Types of Mills: - Ball Mills: Traditional ball mills are commonly used for grinding clinker. They operate by rotating a cylinder with steel grinding balls, causing the balls to fall back into the cylinder and onto the material to be ground. - Vertical Roller Mills (VRM): VRM technology has become increasingly popular for clinker grinding. These mills use a rotating table with rollers to crush and grind the clinker, providing energy efficiency and a smaller footprint compared to ball mills. 4. Gypsum Addition: - Gypsum is often added during the grinding process to control the setting time of the cement. It prevents flash setting of the clinker and facilitates the formation of a workable and pumpable cement paste. 5. Quality Control: - Quality control measures, such as monitoring the fineness of the cement, chemical composition, and other properties, are implemented during the grinding process to ensure the final product meets the required specifications and standards. 6. Clinker Cooling: - Before grinding, the clinker is produced by heating the raw materials in a kiln. The clinker is then cooled before entering the grinding mill to prevent excessive heat build-up during grinding. 7. Dust Collection and Environmental Considerations: - Dust collectors and air pollution control systems are often employed to capture and control the dust generated during the grinding process, addressing environmental and safety concerns. 8. Packaging and Storage: - After grinding, the cement is typically stored in silos before being packaged in bags or dispatched in bulk for distribution to construction sites or for sale in the market. Cement clinker grinding mills play a crucial role in the cement production process, and advancements in technology continue to improve the efficiency and environmental sustainability of the grinding process. Technical details We have different options for different requirements, please contact our team for more info.

Condition: new, power: 338 kW (459.55 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: intarder, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: central locking, cruise control, fog lights, spoiler, = Additional options and accessories = - CD - Immobiliser - Spoilers - Sun visor - Tachograph = Remarks = Country of origin: SPAIN Displacement: 11,120cc Brakes: Electronic Braking System Emergency Brake Assist Bsdpfx Aboy Tymdstowt Construction: Tractor Head ADblue tank 135L LED daytime running lights Mobile Phone preparation Bluetooth Fifth wheel Electr. And headed rear view mirrors Rear differential lock Electr. Stability Programm ESP Air Suspended front seats Electronic Stability Programm ESP Lane Departure Warning System Model: AS440S46T/P Exterior Color: White Cylinders: 6 Kilometer: 740,000 km less than Interior Color: Med. Grey Max Axle Load: 8,000 / 13,000 kg

Condition: good (used), Perfecta BSH 5-1200 Paper Stack Lift with Sidewall This machine is in excellent technical and visual condition. It’s practically unused. It features an adjustable sidewall for easy stacking. Stylish design. 1200 kg lifting capacity Plate size: 990 x 1350 mm Bsdjzw Tz Tspfx Abtowt 380V power supply Weight: 800 kg The lift is very easy to move, mounted on wheels. The control panel is adjustable to the right and left. Photocell-controlled lifting. Quiet hydraulic unit.

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, operating hours: 9,903 h, machine/vehicle number: 20156, USED SAKI TIRE ROLLERS Bwodpfszkq Sijx Abtjt MODEL : TZ600 SERIAL : 20156 YEAR : 1998 HOUR : 9903

Condition: excellent (used), Catalogue number 7781 TECHNICAL SPECIFICATIONS - Maximum milling height: 216mm - Maximum milling depth: 65mm - Maximum cutter diameter: 250mm - Spindle working length: 500mm - Spindle speed: 4600 rpm - Spindle diameter: 40mm - Max tool diameter: 250mm - Worktable dimensions (L/W): 890x400mm - Motor: 11kW - 2 pneumatic material clamps - Air requirement: 6-8 bar - Dust extraction port diameter: 160mm - Dimensions (L/W/H): 1330x1200x1470mm - Weight: 970kg ADVANTAGES Bwodpezxq Tpsfx Abtjt – Polish manufacture – Not repainted – Used milling machine, very good condition Net price: 38,900 PLN Net price: 9,260 EUR (calculated at 4.2 EUR exchange rate) (Prices may vary depending on significant fluctuations)

Condition: good (used), Manual die-cutting with hot foil system. Maximum size: 720 x 1040 mm. Bodjzyc D Aspfx Abtswt Hot foil system with 3 zones. Heating frame needs to be replaced. In production. Available immediately.

Condition: used, Tube end forming machine,Spiro Pneumatic Tube Notching Machine / Assembly Stand, Spiro Manual Tube Notching Machine, Used Machine Technical Specifications Manufacturer: Spiro Development AB (Made in Sweden) Year of Manufacture: 2008 Type: Manual Tube Notching Machine (with pneumatic assistance) Bwsdpfszwxwgjx Abtot Frame Construction: Heavy-duty aluminium machine-building profile frame Operation: Foot-switch-controlled pneumatic operation Design: Adjustable-height and adjustable-distance tube support stand for convenient positioning and machining of long tubes Overall Dimensions Width: 2350 mm Depth: 930 mm Height: 1450 mm

Condition: used, New: Yes Colour: Silver Applicable material: Bitumen Empty weight: 9.500 kg Cargo space capacity: 50.000 l Productivity: 50 tph = Additional options and accessories = - Originally painted - Tool box = Remarks = BITUMEN TANK (50 TONS) • Tanks capacity shall be 50 tons. • Tanks shall be produced in accordance with TSE and highway commission practices. • The tank shall incorporate a hot oil heating, • Seamless steel drawn pipe serpentine system to heat • The bitumentemperature up to mixer mixing temperature • The fuel tank shall incorporate level and heat indicator, suction nozzle, filling orifice, ventilation system, inspection hatch and drain outlet. • There shall be support legs under the tank and its surface shall be isolated with 50 mm rock wool and covered with 0,80 mm galvanized sheet. 1. HOT OIL GENERATOR • Generator capacity shall be 2 000.000 kcal/h. • The system shall be made according to diesel fuel system. • The generator shall incorporate a 1500 l filling tank. • The generator shall be horizontal, have seamless steel drawn hot oil pipe, double wall and circulation body. • Generator body shall be isolated with 100 mm rock wool and covered with aluminium sheet. • Generator system shall be produced according to manufacture standards and it shall incorporate an expansion tank, degasser, oil filter, valves and full automatic ignition controlled burner, Bwodpfox D A R Dex Abtet control panel, pomp and necessary safety equipment. • The serpentine be made of min. 30 m2 seamless steel drawn pipe. • The generator shall be equipped with coupled warning system to protect the complete system in case of dangerous situations showing hot oil level or a decrease in heat transfer oil level. • The burner system shall be designed to activate automatically depending on the adjusted operation temperature of the heat transfer oil. • The system shall be produced in the form of a complete package.

Condition: excellent (used), Profile projector ORAMA 500 with digital display Bedpfx Aoylc Utobtjwt

Year of construction: 1993, condition: good (used), motorised transport table with rollers and. var. speed dimensions L x W x H = 2950 x 1300 x 900 mm feed speed var. Bwjdpfx Aogvvn Eebtot height adjustable +/- 15 cm max. weight load 50 kg/ m Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, functionality: fully functional, Year of construction: 2025, OMEC 4-roll mechanical calender. Available for immediate delivery, subject to prior sale. Model: FX4.90.1330. Double-nip configuration. Working width: 1330 mm. Diameter of upper and lower rolls: 90 mm. Diameter of side rolls: 95 mm. Thickness range: 2 – 2.5 – 3 mm. (1.5 x D, 3 x D, 5 x D) Motorized upper and lower rolls with equal power. Motorized side rolls for up/down movement. Front opening of the upper roll. Roll hardness: HRC 55/60, depth 2 mm. Special bearings for side rolls. External lever for adjusting roll inclination. Sheet clamping with bearing-supported device. 2-pedal foot control. Electrical panel compliant with “CE” standards. Indicator in mm for reading sheet clamping. Bedpfx Aefh Skpjbtewt 4-ROLL MECHANICAL CALENDER with double-nip configuration and front release. The upper roll is fixed, while the up and down movement is applied to the side rolls and the lower roll. Sheet clamping is very easy, as once the sheet is inserted between the upper and lower rolls, the latter rises and locks the sheet in place. Power: 1.8 kW Dimensions: 800 x 2100 x H 1300 mm Weight: 625 kg Included with the machine: Conical device on the front of the upper roll. No. 02 digital displays for the position of the side rolls. Grinding/Turning of the rolls after heat treatment. Roll hardening.

Condition: excellent (used), Year of construction: 1998, HÖFER LAN 1300 Adhesive Coating Machine For the efficient application of water-soluble dispersions (white glue, etc.) on one or both sides. Bwjdpfoza A Aajx Abtjt Coating width: maximum 1300 mm Drive: 0.37 kW geared motor Rubber-coated coating rollers: Ø 170 mm Grooving for coating quantity: approx. 120 g/m² (for veneers) Constant coating speed: approx. 16 m/min Working height: approx. 900 mm Maximum workpiece thickness: 80 mm Design complies with CE standards Manual feed Operating side: right Including swivel casters Machine dimensions L x W x H = 1750 x 660 x 1300 mm

Condition: like new (used), Year of construction: 2022, As-new condition (only 5,000 m² of parquet processed so far), compact oil application line consisting of: Roller Application Unit: - For the application of oils, etc. - Touchscreen control - Manual height adjustment - Max. working width: 300 mm - Max. workpiece height: 50 mm - Membrane pump with max. capacity of 18 l/min - Frequency inverter for variable speed of application roller - Frequency inverter for variable speed of counter-roller - Conveyor belt speed adjustable: 3 to 14 m/min - Stainless steel recovery trays Pad Group + Brush Group: - For spreading and removing excess oils - Touchscreen control - Manual height adjustment - Conveyor belt speed adjustable: 3 to 14 m/min - Max. working width: 300 mm - Max. workpiece height: 50 mm - Pad diameter: 300 mm - Quick-change system for pads - Brush dimensions (L x D): 300 x 160 mm - Quick-change system for brushes UV / LED Unit: - Touchscreen control - Manual height adjustment - Max. working width: 300 mm - Max. workpiece height: 50 mm - UV-LED power: 12 Watt/cm² - Incl. ventilation fan - Conveyor belt made of Kevlar fabric - Conveyor belt speed adjustable: 3 to 14 m/min Outfeed Conveyor Belt: - Length: approx. 2,500 mm - Max. working width: 300 mm - Conveyor belt speed adjustable: 3 to 14 m/min Note for used machinery: • Technical details and prior sale subject to change and errors. • Stated prices are ex works - free loading! • The machine has been cleaned and functionally tested. Bsdpfex Ah A Asx Abtowt • All machines are sold as inspected, without any warranty claims. Buyers are free to inspect the machine at its location. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Condition: used, Second-hand 4-roller feed unit with stand from HOLZ-HER, model ETZ, for feeding workpieces in woodworking. The machine is suitable for continuous feeding in various woodworking applications. Includes new rubber rollers. Bwodpszymtzjfx Abtjt Technical data: - Feed speed: 2–30 m/min

Condition: used, TECHNICAL SPECIFICATIONS: - length 5600 mm - width 600 mm Bwsdpozwn Eaefx Abtst - pneumatic clamping force - height from base 1160 mm +/- 50 mm Dimensions - 600x90x160

Condition: used, Year of construction: 2021, Oil Application Machine LW100.6/300 Two-Roller Machine – Roller width: 300 mm, material passage up to 80 mm. Oil application on top and bottom. Adjustable feed speed approx. 6–35 m/min. Motor 0.37 kW, 400 Volt, 50 Hz. CE certificate. Machine table working height 900 mm, powder-coated. Additional safety hood with adjustable pass-through thickness, with plexiglass insert. Non-driven roller conveyor 1300 mm, working height 900 mm, height adjustable. Storage location: Nattheim. Bsdpfxoxy Tmue Abtjwt

Condition: used, Year of construction: 2004, double end profiling machine for the door and windows production working width 4000 mm 3 aggregates on each side 1 x saw 2 x vertical miling aggregate - spindle stroke 800 mm! long side profiling machine with 16 spindles machine comes with a lot of spare parts! further technical data on demand Bwjdpfjdfx Hcex Abtjt Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Year of construction: 2018, functionality: fully functional, cooling capacity: 396 kW (538.41 HP), type of input current: three-phase, type of cooling: air, overall weight: 5,142 kg, input voltage: 400 V, total width: 2,310 mm, total length: 5,100 mm, total height: 2,600 mm, warranty duration: 6 months, AIRCOOLED CHILLER LIEBERT FL4039 396 KW Bodpfx Abozyl Rfstjwt Cooling capacity: 396.0 kW / 112.6 tons (15/10 — 35°C) Year of manufacture: 2018 Options: Hydraulic module. Freecooling. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Bitzer CSH7573-70Y40D (screw) Type of refrigerant: R134a Number of fans: 8 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Grundfos NB65-125/120-110 X-E-A GQQE + 1 pcs. Grundfos NB65-125/120-110 X-E2-A-BQQE + 1 pcs. Grundfos NB65-125/137-X-F-A-GQQE (Freecooling), expansion vessel. Dimensions: 5.1x2.31x2.6 m Weight: 5142 kg Working hours: 862/3889 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Code: 0298 Brand: OSAMA Model: S1R-250 - CE Standard Bodpfx Abjyi E Hgetowt Manual 1 roller gluing machine for edges and block wood, carpentry, furniture, laminated wood beams, and various - CE Standard Technical data: Max working length 250 mm Roller diameter 150 mm Feed speed 28 m/min Motor power Hp 0,25 Working table height 800 mm Overall dimensions mm 1500 x 700 x 850 h Weight kg 100

Condition: good (used), Hang 87F 3-Head Eyeletter with Extraction Bwedpfx Abezvgkxetet Manufacturer: Hang Germany Very good condition, recently serviced. The machine is used for setting eyelets. Three eyeletting heads with adjustable spacing and the ability to deactivate a specific head. Installed waste extraction system immediately after eyeletting. Cardboard thickness: 0.2-4 mm Throat depth: 300 mm Head spacing: adjustable from 70-320 mm Cycle time: 0.5 s The machine uses Hang No. 272 ​​rivets. Weight: 570 kg Power supply: 380 V The cycle is initiated by a foot pedal. Eyelets included.