Used Gunter Grossmann Gg30Bc for sale (108)

Condition: ready for operation (used), Year of construction: 1999, operating hours: 24,364 h, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Fanuc MSC 501 (Fanuc 16i), spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Cjdpfjyc Unmex Abtehb X-axis travel: 560 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Spindle speed range: 10,000 rpm Spindle motor power: 22 kW Rapid traverse (x/y/z): 32 mm/min Tool magazine capacity: 40 (SK40) Pallet size: 2 x 400 x 400 mm Table load: 0.5 t Table indexing: 1° MACHINE DETAILS Control: Fanuc MSC 501 (Fanuc 16i) Total power requirement: 56 kVA Dimensions & Weight Required space: approx. 2.9 x 4.1 x 3 m Machine weight: approx. 8.7 t Operating hours: 24,364 h EQUIPMENT Chip conveyor Interface for internal coolant supply

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: YS-2674, turning height: 1,250 mm, workpiece weight (max.): 5,000 kg, turning diameter: 1,600 mm, faceplate diameter: 1,250 mm, controller model: Fanuc 0i-TD, TECHNICAL DETAILS Faceplate diameter: 1,250 mm Max. torque on faceplate: 12,500 Nm Turning height: 1,250 mm Max. turning diameter: 1,600 mm Max. workpiece weight: 5,000 kg Table speed: 2 - 300 rpm Travel range X-axis: 1,475 mm Travel range Z-axis: 900 mm Rapid traverse: 10 m/min Spindle taper: ISO BT50 Cjdpfx Aozb Uy Tobtohb Number of tool positions: 12 MACHINE DETAILS Control system: Fanuc 0i-TD Total power: 75 kW Dimensions & Weight Footprint: approx. 4.7 x 5.8 x 5.5 m Machine weight: approx. 32 t EQUIPMENT Tool changer magazine for 12 turning tools with BT 50 shank Note: The €5,000 for dismantling and loading applies to the preparation for EU transport. Preparation for sea transport is possible; costs upon request.

Year of construction: 2006, condition: good (used), functionality: fully functional, machine/vehicle number: 138883, TECHNICAL DETAILS Press force: 160 t Bending length: 4100 mm Distance between uprights: 3100 mm Control system: DELEM DA66W Csdelp Iq Repfx Abtjhb Table width: 120 mm Stroke: max. 800 mm Downstroke speed: 80 mm/sec Upstroke speed: 80 mm/sec Speed under load: 8 mm/sec MACHINE DETAILS Oil capacity: 185 l Total power consumption: 24 kW Machine weight: approx. 13 t Space requirement: approx. 4.8 x 2.2 x 2.2 m

Condition: good (used), Transformer, converter, three-phase autotransformer, three-phase transformer, single-phase transformer, control transformer -Manufacturer: Günter Kirch, Transformer Control Transformer Type STR -Power: 630/1800 VA -Voltage: 380V / 220V -Technical data: see photo of the type plate -Dimensions: 150/115/H145 mm -Weight: 7.7 kg Chjdpfezi S Ipox Abtob

Condition: used, Year of construction: 1992, sheet width 3000 mm plate thickness 06 mm distance between columns 3200 mm throat 250 mm stroke 180 mm table width 520 mm table height over floor 1015 mm Number of downholders 8 St. cutting angle 0,5 - 2,5 ° total power requirement 12 kW weight of the machine ca. 10 t dimensions of the machine ca. 3,8 x 2,65 x 2,45 m Machine was overhauled and modernized with light barrier at table. Machine has an automatic back stop with programmable DRO and a sheet lifting device. Chjdpfjt Tqnvsx Abteb

Condition: reconditioned (used), machine/vehicle number: 2586k, No.: 2586k 1 used, functionally tested and operating compounding-pelletizing line, equipped with : Extruder twin-screw COMAC Type EBC 68 with Motor 110 kW-DC screws 2x Ø 68 mm – 40 L/D co-rotating intermeshing Segmented screws & cylinders, Water / Medium cooled 1x venting port Codpfx Absd H S U Uetehb 1x side feeder screws 2x Ø 52 mm Melt-filter 2 piston Type K-SWE 160 incl. Hydraulic-pack BKG underwater-pelletizing unit Type AH 2000, complete with: diverter-valve / Hydraulic pelletizer with motor 4 kW incl. die-plate and knife-holder Water – Box TWS volume 900 liter, heating power 40 kW Installed Water pump with 11 kW, By-Pass-System Pellet Spin-dryer TVE 2000 ED with motor 4 kW water sieve with circulation pump 4 kW Siemens S7 – Touch control board More extruders / recycling - and compounding lines ex our stock Wuppertal-Germany available, as: pelletizing systems, dosing & blending, screen-pack-changer, pellet classification, granulating and many more. Ask for our most recent stock-list or visit us in Wuppertal-Germany. You´re welcome.

Condition: used, Year of construction: 2000, x-travel 3000 mm y-travel 1400 mm z-travel 1500 mm table-size 3200 x 1100 mm control TNC 430 B spindle turning speed range 60 - 4000 U/min Cjdpfxozrpnxs Abtshb spindle taper ISO 50 feeds mm/min table load 10 t milling drive 24 kW Center of spindle to wall or column 1229 mm total power requirement 50 kW weight of the machine ca. 22 t dimensions of the machine ca. 6,5 x 3 x 3 m control: Heidenhain TNC 430 B digital. Universal milling head is automatically swivable and turnable in 1,5° steps. Machine has a 20 position ATC, a chip conveyor, an adaptable high speed spindle (30.000 rpm) and a mist cooling arrangement. Machine in program for 25.616 hours.

Condition: used, Year of construction: 2002, x-travel 3000 mm y-travel 1600 mm z-travel 1500 mm table-size (2x) 2000 x 2000 mm control TNC 430 B spindle turning speed range 60 - 3600 U/min spindle taper ISO 50 feeds mm/min table load 10 t milling drive 28 kW total power requirement 48 kW weight of the machine ca. 47 t dimensions of the machine ca. 6,5 x 3 x 3 m control: Heidenhain TNC 430 B digital. Machine has 6 axes controled, X/Y/Z, C- Chjdpfx Abszrpnrotob axe table rotation and A/B axes for universal head. Machine has a 40 position ATC, cooling through spindle, a chip conveyor, an adaptable high speed spindle (30.000 rpm) and two pallets in the pallet changer. Machine in program 22.347 hours.