Used Holzma Hpp 300 for sale (12,936)

Condition: like new (used), Year of construction: 2023, CYCLOP CTT 300-16300-1030 Pallet wrapper Technical data: Turntable diameter Ø 1650 mm Turntable speed up to 15 rpm, adjustable Start/stop, frequency-controlled Number of top/bottom wraps 1-15 Stretching unit speed, continuously adjustable Programs, 9 adjustable Pallet load Max. length x width 1200 x 1000 mm Max. height incl. pallet 2200 mm Maximum weight 2000 kg Stretch film Core diameter 76 mm Outer diameter max. 250 mm Film width max. 500 mm Film thickness 9 – 35 µm The pallet wrapper has never been used and is in new condition. Iisdpfx Aezrfq Aek Aef

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, cutting width (max.): 4,300 mm, section length (max.): 1,600 mm, TECHNICAL DETAILS Max. cutting length: 1,600 mm Min. cutting width: 4,300 mm MACHINE DETAILS Iijdpfx Asyuya Esk Ajf Number of transport packages: 8 pcs. Year of manufacture: 2016

Condition: used, Year of construction: 2018, - Length: 220 cm - Width: 150 cm - Height: 35 cm Shrink film packaging system Manufacturer: Erregi Type: 300 LP Year of manufacture: 2018 This film packaging system with a shrink tunnel from the manufacturer Erregi is used for the automated packaging of products in shrink film. It offers precise control of temperature and air circulation, ensuring uniform shrinking at high efficiency. Two conveyor tables are located before and after the machine, enabling smooth material flow and ergonomic handling during the packaging process. Technical data: - Voltage: 400 V, 50 Hz - Feed rate: 15 m/min - Weight: 1300 kg (without conveyor tables) External dimensions - Length: 12 m - Width: 4 m - Height: 2.5 m Workpiece dimensions Iodpjzuz Shofx Ak Asif - Length: 220 cm - Width: 150 cm - Height: 35 cm Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2011, Technical details: x-travel: 410 mm y-travel: 610 mm z-travel: 500 mm turning speeds: 15000 1/min tool adaptor: SK 40 control: iTNC 530 HEIDENHAIN smart NC table:: 320 x 320 mm table load: 100 kg tool change unit: 48 Pos. total power requirement: 35 kVA Ijdpfjzuxx Sjx Ak Ajif weight of the machine ca.: 7,4 t dimensions of the machine ca.: 4,15 x 3,8 x 3,28 m 5-axis simultaneously machining center, NC-round-swivelling table, C-axis 360°, B-axis +30/-120°, chipconveyor, 3D touchprobe, internal coolant supply 20bar, el. handwheel, kinematicsopt, meter readings: approx. 9.600h "machine on", approx.3.500h "spindle on" *

Condition: as good as new (ex-display), Year of construction: 2025, High-pressure cleaning unit, high-pressure flushing unit, high-pressure built-in unit on hot-dip galvanized and painted high-quality steel frame with forklift pockets, suitable for installation in service vehicles. PTC Salmon, similar but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Salmon 60/200 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW Salmon 75/150 | 75 l/min at 150 bar | Engine: Vanguard 35 HP 26 kW Salmon 30/300 | 30 l/min at 300 bar | Engine: Vanguard 35 HP 26 kW Salmon 45/240 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW DIMENSIONS / WEIGHT: Dimensions without water tank (L x W x H): approx. 760 x 1,250 x 1,200 mm Dimensions with 400 l water tank (L x W x H): approx. 1,220 x 1,250 x 1,200 mm Dimensions with 800 l water tank (L x W x H): approx. 1,670 x 1,250 x 1,200 mm Empty weight without water tank: approx. 300 kg Empty weight with 400 l water tank: approx. 320 kg Empty weight with 800 l water tank: approx. 350 kg HIGH-PRESSURE PUMP:  Manufacturer: HPP  Model: CLW ENGINE:  Manufacturer: Vanguard  Model: 35 HP  Fuel: Gasoline  Max. Output: 35 hp (26 kW) CONTROL PANEL:  Start button  Operating hour counter  Electronic fuel gauge  LED display for oil temperature  LED display for low lubricating oil pressure  LED display for clogged air filter  LED display for engine speed  LED display for generator  LED display for spark plugs  Emergency stop button ELECTRICAL CONTROL:  Winding/unwinding of hydraulic hose reel;  On/Off bypass;  Engine speed control +/-;  Emergency stop button;  Switching to wireless remote control; INSTALLED ALARM:  Water shortage protection against dry running of the high-pressure pump with automatic shut-off function. SAFETY AND PRESSURE REGULATING VALVES:  The unit is equipped with a safety valve, a pressure regulating valve and a pressure gauge. Iiodpfx Aef Arugok Asf HIGH-PRESSURE HOSE REEL:  Type: Electric hose reel  Material: Stainless steel  Capacity: max. 80 m ½“ and 80 m 3/8" high-pressure hose  Hose: 80 m ½“ high-pressure hose (included)  Hose guide: manual LOW-PRESSURE WATER SUPPLY HOSE REEL:  Type: manual hose reel  Material: Stainless steel  Capacity: max. 35 m ¾“ low-pressure hose  Hose: 35 m ¾“ low-pressure hose (included) WATER FILTER:  With washable cartridge and drain valve.  Filtration degree: 50 Mesh INCLUDED IN DELIVERY:  Multi-function wireless remote control IMET; - On/Off motor; - On/Off bypass; - Engine speed control +/-; - Winding/unwinding of hydraulic hose reel; - Emergency stop button;  Battery charger for wireless remote control;  300, 400, 500 or 800 l (with steel frame) water tank made of polyethylene; OPTIONAL ON REQUEST:  Pulsation/booster pump;  50 or 60 m ½“ high-pressure hose;  50, 60 or 80 m 3/8“ high-pressure hose with G3/4“ connection; ACCESSORIES ON REQUEST:  STORZ kit for connection to the water hydrant;  UNI 45 kit;  Version with 2 HD hose reels;  Mobile hot water generator 10 kW – 12 VDC;  High-pressure spray gun kit, swivel joint and quick coupling;  High-pressure lance kit with flat jet nozzle 15° / rotating nozzle;  Lance kit for high flow rate;  Rotating nozzle kit;  Double nozzle kit;  Water sandblasting lance kit;  Detergent dispenser kit;  Step cleaning device;  Surface cleaner;  Sludge suction device (Venturi);  Pipe cleaning nozzles;  Other accessories on request.

Condition: used, Year of construction: 2004, saw blade diameter: 180 mm, tool diameter: 450 mm, Equipment: scorer, TECHNICAL DETAILS Iijdpfx Akezmtm Uj Aef Sawing carriage Max. saw blade overhang: 125 mm Number of grippers: 11 Max. feed rate: 80 m/min Max. tool diameter: 450 mm Motor power: 21 kW Scoring saw Max. saw blade diameter: 180 mm Motor power: 2.2 kW Max. feed rate: 150 m/min EQUIPMENT Lifting table Scoring unit Barcode label printer The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents, which are of a descriptive nature. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 6645

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, total length: 3,050 mm, total width: 1,400 mm, Equipment: CE marking, 3050 mm x 1400 mm automatic membrane press with turnover and pin system. Has two tables. Iedpfx Aezp H Ikjk Aoif 320 Bar Working Pressure 60 N/cm^2 Spec. Press. 3000 kN Max Pressure 400V 50hz Ready to use in Turkey; can ship abroad.

Condition: like new (used), functionality: fully functional, total height: 450 mm, total width: 240 mm, total length: 670 mm, input voltage: 400 V, ground cable length: 4,000 mm, type of cooling: air, hose package length: 4,000 mm, welding current at 60% duty cycle: 250 A, welding current at 100% duty cycle: 200 A, welding current (min.): 15 A, welding current (max.): 300 A, Unused Lascentrum MIG 300 DP-3 Synergic Double Pulse MIG/MAG for steel, stainless steel and aluminium. Ideally suited for on-site work, general welding, medium-duty steel/stainless steel/aluminium structural work, and in the workshop. 15-300 AMP 400 Volt Synergic Puls / Double Pulse 2/4 Step / 4 Roller Drive Fixed Programs / Program Memory Stick Option Including: SB250 3 Meter Welding Torch Earth Cable 3 Meter 35mm² Electrode Cable Gas hose Manual (If available in the Packaging) Original packaging 3 Months Warranty The machine is unused and comes from a stock lot. No manufacturer’s warranty from Lascentrum applies. Test welding is available at our workshop in Valkenswaard. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. Iiodszqc Aaopfx Ak Aof We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Year of construction: 2022, condition: like new (used), functionality: fully functional, machine/vehicle number: P25291, Please provide us with your offer price. Iedpozmqlhefx Ak Aeif Sales only within Europe, including Turkey. Price excludes packaging; delivery condition: FCA (machine location). ===== Technical data can be found in the attached handout. Any warranty is excluded. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations. No sales to private individuals.

Condition: used, Year of construction: 2001, Technical data: Okuma Space Turn LB 300 MY Year of manufacture: 2001 Control: OSP U 100 L Max. Turning length: 340 mm Chuck diameter: 10 inch X-axis: 280 mm Y-axis: 120 mm Z-axis: 500 mm C-axis: 360°(0.0001°) Spindle: 4500 rpm Spindle clearance: 62 mm Iisdpfx Aequcnbsk Asf Weight: 6000 kg Accessories: -Driven tools -Chip conveyor -Transformer -Manuals

Condition: used, Year of construction: 2012, - Machining area: 5300x1400 mm Iisdpfx Aezuw Rtek Asf - Main spindle replaced 3 years ago - 18-position tool changer Technical data Machining area - In the X direction: 5300 mm - In the Y direction with main spindle + WZ-0: 20 mm: 1400 mm - In the Y direction with drilling unit: (all vertical drills) 890 mm - Single-position machining: X = 2 x 2550 mm - Free space in the center: X = 200 mm - Alternating field machining: X = 2 x 2250 mm - Free space in the center: 800 mm 1 automatic tool/adapter changer magazine - Arrangement: mounted on the support, moving in the X direction - Disc changer with 18 magazine positions Guidance system - All axes are equipped with pre-tensioned, surface-hardened precision roller guides. Central lubrication - Manual central lubrication for all main axis linear guides and Z ball screw. 1 vacuum pump, 90 m3/h Console table consisting of: - 2 work piece stops fixed on the right and 2 on the left in the X direction, for movement in the Y direction - 10 adjustable support arms in the X direction, each with a rear stop - All stops are controlled by the program - The suction plates are fixed via the patented 2-circuit clamping system, eliminating the need for hoses. - 8 smooth support rails, automatically retractable - 2 push buttons for the workpiece clamping/releasing function Additional 2nd vacuum pump, 90 m3/h 1 additional central stop row, for centering workpieces Chip conveyor 1 main spindle - Drive power: 10.0 kW in S-6 operation - 7.5 kW in S-1 operation - Tool holder: HSK F63, taper diameter = 38 mm, similar to DIN 69893 - Speed range: infinitely variable RPM, programmable 1 centrally integrated CNC axis, rotating 360 degrees - for all adapter units, with torque support on the main spindle and pneumatic interface 1 vertical drilling unit l14 with 6 spindles, horizontal and attachment unit for a dado cutter - Horizontal drilling units with 2 outputs each Attachment unit for a dado cutter - Swivel range: 0 or 90° Control system ICOS CNC Modern, powerful PC-based control system with: - User-friendly interface with Windows standards - Trajectory control of all servo axes - Job list / order processing - IMA backup and recovery system on two hard drives - Uninterruptible power supply (UPS) IMAWOP software package - for dialog-oriented creation of CNC machining programs - - 3D view and basic simulation of the programmed workpiece, the suction cups and consoles including tool and adapter display.

Condition: as good as new (ex-display), Year of construction: 2025, High-pressure cleaner, high-pressure flushing unit, high-pressure built-in unit on hot-dip galvanized and painted high-quality steel frame with forklift tines, suitable for installation in service vehicles. PTC Moses 60/200, 75/150, 30/300, 75/210XL, 84/190XL, 102/150XL and 50/300XL – similar to, but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... Iiodpfx Akof Ar Exj Aef The following models are available: Moses 60/200 | 60 l/min. at 200 bar | Engine: Yanmar 3TNV88C 27.5 kW Stage V Moses 75/150 | 75 l/min. at 150 bar | Engine: Yanmar 3TNV88C 27.5 kW Stage V Moses 30/300 | 30 l/min. at 300 bar | Engine: Yanmar 3TNV88C 27.5 kW Stage V Moses XL 75/210 | 75 l/min. at 210 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V Moses XL 84/190 | 80 l/min. at 190 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V Moses XL 102/150 | 102 l/min. at 150 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V Moses XL 50/300 | 50 l/min. at 300 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V DIMENSIONS / WEIGHT: Dimensions of models with 27.5 kW without water tank LxWxH: approx. 910x1,220x1,200 mm Dimensions of models with 35.5 kW without water tank LxWxH: approx. 1,240x1,310x1,300 mm Empty weight without water tank: approx. 550-700 kg HIGH-PRESSURE PUMP: - Manufacturer: HPP - Model: CLW for standard models and ELS for XL models - Flow rate: max. 102 l/min. - Operating pressure: max. 300 bar ENGINE: - Manufacturer: Yanmar - Model: 3TNV88C and 4TNV88C - Fuel: Diesel - Cooling: Water - Cylinders: 3 and 4 - Max. power: 37-48 hp (27.5-35.5 kW) - Max. engine speed: 3,600 rpm TRANSMISSION: Pulley and belt CONTROL PANEL: - Start button - Hour meter - Electronic fuel gauge - LED indicator for oil temperature - LED indicator for low lubricating oil pressure - LED indicator for clogged air filter - LED indicator for speed measurement - LED indicator for generator - LED indicator for spark plugs - Emergency stop button ELECTRICAL CONTROL: - Winding/unwinding of hydraulic hose reel; - On/off bypass; - Speed control +/-; - Emergency stop button; - Switching to remote control; INSTALLED ALARM: - Low water level protection against dry running of the high-pressure pump with automatic shut-off function. SAFETY AND PRESSURE REGULATING VALVES: - The unit is equipped with a safety valve, a pressure regulating valve and a pressure gauge. HIGH-PRESSURE HOSE REEL: - Type: hydraulically operated hose reel, swiveling by 180° - Material: Stainless steel - Capacity: max. 100 m ½“ - Hose: 80 m ½“ high-pressure hose (included) - Hose guidance: manual WATER SUPPLY HOSE REEL: - Type: manual - Material: Stainless steel - Capacity: max. 35 m ¾“ low-pressure hose - Hose: 35 m ¾“ low-pressure hose (included) FUEL/OIL TANK: - Fuel: approx. 13 l - Oil: approx. 13 l INCLUDED IN DELIVERY: - Multifunction remote control IMET; - On / Off engine; - On / Off bypass; - Speed control +/-; - Winding / unwinding of hydraulic hose reel; - Emergency stop button; - Battery charger for remote control; - 500, 800 or 1000 l water tank;

Condition: excellent (used), Year of construction: 1993, Technical specifications: Manufacturer: Striebig Year of manufacture: 9/1993 Type: Standard II Plus 5220A Feed: manual Design: automatically adjusting aluminum slat bed Saw carriage locking: manual Lowering of saw unit: manual Swivel adjustment 0 to 90°: manual Motor power: 4.4 kW Cutting range: 4600 × 2200 × 60 mm Speed: 5250 rpm Saw blade diameter: 300 mm Space required: L × H × W 5700 × 3000 × 1400 Isdpfx Akjiwlz As Aoif Condition: very good Location: warehouse Saw blade: 1 piece Can be loaded onto a truck using a forklift on site. Delivery and assembly possible by arrangement.

Year of construction: 1987, condition: used, One Rösler R 300 A/SA-KP and one R 300 RT are available, year of manufacture: 1986/ 1987, 1) R 300 A/SA-KP, connected load: 4.5kW, weight: 830kg, 2) R 300 RT, connected load: 19kW, weight: 2,130kg, with documentation. An on-site inspection is possible. Ijdpezuzy Eefx Ak Ajif

Condition: excellent (used), Year of construction: 2016, X-axis: 550 mm Isdpfx Akezcpifo Asif Y-axis: 350 mm Z-axis: 400 mm Max. workpiece dimensions: 1,200 x 700 x 400 mm Max. workpiece weight: 1,500 kg Machine weight: 2,850 kg Cutting range: 30 degrees on 400 mm Includes operating manual. Machine can be inspected while powered on.

Condition: ready for operation (used), Year of construction: 2018, cutting diameter 300 mm saw band length 3660 x 27 x 0.9 mm capacity 90 degrees: flat 320 x 290 mm capacity 45 degrees: round 290 mm capacity 45 degrees: flat 260 x 280 mm capacity 60 degrees: round 200 mm capacity 60 degrees: flat 180 x 170 mm coolant capacity ca. 100 l Control SPS total power requirement 2.4 kW AC weight 904 kg range L-W-H 2410 x 1920 x 2020 mm in good conditions Original price approx. 22.000 euros Special price on request Features: - Robust electro-hydraulic miter band saw, fully automatic (INDUSTRIAL) * Fully automatic with automatic material feed * Material feed unit with recirculating ball screws - Includes PLC MITSUBISHI control unit * 20 programs, each with 15 cutting lengths + number of pieces programmable - For angles from 0° to 60°, with ball-bearing rotary table Isdey Uy S Aopfx Ak Aoif * Mitre cuts up to 45° possible in automatic mode * Mitre cuts up to 60° possible in semi-automatic mode * Manual mitre adjustment * Stepless adjustment of the mitre angle - Saw blade guides made of carbide plates - Saw feed continuously adjustable via fine throttle - Strong machine bed and torsion-free saw frame - Stepless speed adjustment of the saw blade - Coolant device - Operating instructions for machine + control system * Special accessories included: - 1x PEGAS chip conveyor

Condition: good (used), Year of construction: 2013, functionality: fully functional, working width: 300 mm, passage height: 340 mm, Three-sided brush sanding machine / brush machine Manufacturer: Houfek Type: Twingo 300 Year of manufacture: 2013 Working width: 300 mm Passage height: approx. 340 mm 1x sanding brush unit, vertical, from the left, speed infinitely adjustable 1x sanding brush unit, vertical, from the right, speed infinitely adjustable Iijdpfjzg S Nzsx Ak Aef 2x sanding brush units, horizontal, from above, speed infinitely adjustable Feed rate infinitely adjustable Machine weight: approx. 690 kg Includes various sanding and structuring brushes on a separate pallet.

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 0-241-06-5232, functionality: fully functional, operating hours: 12,608 h, cutting height (max.): 125 mm, cutting width (max.): 2,200 mm, cutting length (max.): 4,300 mm, Panel Saw Holzma HKL11/43/22 Max. cutting width: 4300 mm Max. cutting length: 2200 mm Max. cutting height: 125 mm The saw is in continuous operation, so viewing during operation is possible. Iiedpfx Akjxfvp As Aof The machine will be available from 02/03/2026.

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 2013-5191, Ultrasonic cleaning system, less than 2 operating hours Iedpfoxqnqpjx Ak Aoif

Year of construction: 2012, condition: used, Empty weight: 8.500 kg Carrying capacity: 200 kg GVW: 8.700 kg Length: 30 cm Lifting capacity: 200 kg Serial number: 162 Machining center comprising: Iedszvcckjpfx Ak Aeif - A 2012 OKK VC-X350 CNC lathe - A Fanuc M-20iA robotic tool changer Technical specifications: - Axis travel: - X: 600 mm - Y: 430 mm - Z: 460 mm - A: -120° to +30° - C: 360° - Table-to-spindle nose distance: 70 mm – 530 mm - Table working surface: 350 mm - Table load capacity: 200 kg - Feed rate: - X/Y: 50 m/min - Z: 36 m/min - Cutting feed (X/Y/Z): 36 m/min - Spindle: - Power: 50/30 HP - Spindle speed: 12,000 rpm - Taper type: BT40 - Tools: - Number of standard tools: 120 - Maximum tool weight: 7 kg - Maximum tool length: 300 mm - Maximum tool diameter: 82 mm / 125 mm without adjacent tool - Tool-to-tool change time: approximately 1.3 seconds - Machine weight: 8,500 kg - Approximate dimensions: L 1,895 mm x W 3,440 mm x H 3,000 mm - Machine controller: FANUC F31i-A5 Hours on the clock: approximately 5,540 h Sold with workbenches and cabinets, including contents Online auction held following the closure of the "Supadis" production facility in Le Plessis-Pâté (91), a company specializing in precision machining. This sale includes more than 100 lots, notably several 3-, 4-, and 5-axis CNC machining centers from “Matsuura,” “OKK,” “Biglia,” and “Nakamura Tome,” as well as a “Kasto Functional A” automatic saw. The lot also includes grinding machines, a “Cincinnati” column drill press, “Trimos” and “Mitutoyo” measuring columns, as well as numerous tools, workbenches, and inspection equipment. The sale also includes stocks of raw materials (steel, aluminum, titanium, “Inconel,” “PEEK,” copper, etc.), workshop equipment, compressors, shelving, and various material-handling equipment. Sale organized by Dome Auctions France, OVV No. 331-2026, auctioneer Blandine Camper. The online auction opens Tuesday 18 August and closes Thursday 24 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 22 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: good (used), Year of construction: 2012, functionality: fully functional, Equipment: documentation/manual, IMA BIMA 300 CNC Machining Center For sale is an IMA BIMA 300, a 4-axis CNC machining center with a cantilever table. Key data: Machining area: X-axis: approx. 5300 mm [IMA BIMA 300 | PDF] Y-axis: up to approx. 1400 mm (depending on the tool) [IMA BIMA 300 | PDF] Max. workpiece height or clamping height: approx. 125 mm [IMA BIMA 300 | PDF] Machine weight: approx. 6500 kg [IMA BIMA 300 | PDF] Machine structure and drive: Steel construction with a movable support in the X, Y, and Z axes [IMA BIMA 300 | PDF] Servo-driven axes with rack and pinion drive (X) and ball screws (Y/Z) [IMA BIMA 300 | PDF] Travel speeds: X: up to 100 m/min Y: up to 60 m/min Z: up to 30 m/min [IMA BIMA 300 | PDF] Main spindle: Power: 7.5 kW (S1) / 10 kW (S6) [IMA BIMA 300 | PDF] Tool holder: HSK F63 [IMA BIMA 300 | PDF] Speed range: up to 24,000 rpm [IMA BIMA 300 | PDF] Clockwise/counterclockwise rotation programmable [IMA BIMA 300 | PDF] Tool and machining units: Tool changer (disc-type tool changer) with approx. 18 magazine positions [IMA BIMA 300 | PDF] CNC-controlled C-axis (360° rotatable) [IMA BIMA 300 | PDF] Drilling unit: Vertical and horizontal drilling spindles Integrated dado saw [IMA BIMA 300 | PDF] Mounting for various adapter units [IMA BIMA 300 | PDF] Table system / clamping technology: Cantilever table with: Iisdoza Dm Hepfx Ak Aof 10 adjustable support arms several suction plates (vacuum clamping system) [IMA BIMA 300 | PDF] Two vacuum circuits, positionable depending on the workpiece [IMA BIMA 300 | PDF] Second vacuum pump available (90 m³/h) [IMA BIMA 300 | PDF] Control and software: ICOS CNC control system [IMA BIMA 300 | PDF] Programming via IMAWOP (dialog-oriented, graphical interface) [IMA BIMA 300 | PDF] PC-based control with network connection [IMA BIMA 300 | PDF] Additional equipment: Chip conveyor [IMA BIMA 300 | PDF] Central lubrication of the linear guides [IMA BIMA 300 | PDF] Dust extraction connection (Ø 250 mm, approx. 4950 m³/h) [IMA BIMA 300 | PDF] Safety equipment according to CE with safety guards and floor mats [IMA BIMA 300 | PDF] Documentation and spare parts catalog available [IMA BIMA 300 | PDF] Electrical data: Power connection: 400/230 V, 50 Hz, 3N/PE [IMA BIMA 300 | PDF] Further details regarding the equipment and condition can be provided upon request.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, input voltage: 400 V, open-circuit voltage: 87 V, welding current at 60% duty cycle: 270 A, welding current at 100% duty cycle: 220 A, input current: 25 A, protection type (IP code): IP23, welding current (min.): 3 A, welding current (max.): 300 A, input frequency: 60 Hz, We are offering this as-new EWM Tetrix XQ 300 puls AC/DC Expert 3.0 5POL welding machine, year of manufacture 2023. Including Cool XQ 41-1 cooling module Iisdpfx Aoy Sxkfok Aef Mains voltage: 380–400 V Mains frequency: 50/60 Hz Rated current I1,max: 24.9 A Rated current I1,eff: 15.5 A Open-circuit voltage (U0): 87 V MIG/MAG welding current range: 3–300 A MIG/MAG welding voltage: 10.1–22.0 V MIG/MAG duty cycle 40%: 300 A MIG/MAG voltage at 40% duty cycle: 22.0 V MIG/MAG duty cycle 60%: 270 A MIG/MAG voltage at 60% duty cycle: 20.8 V MIG/MAG duty cycle 100%: 220 A MIG/MAG voltage at 100% duty cycle: 18.8 V Manual arc welding current range: 5–300 A Manual arc welding voltage: 20.2–32.0 V Manual arc welding duty cycle 30%: 300 A Manual arc welding voltage at 30% duty cycle: 32.0 V Manual arc welding duty cycle 60%: 260 A Manual arc welding voltage at 60% duty cycle: 30.4 V Manual arc welding duty cycle 100%: 210 A Manual arc welding voltage at 100% duty cycle: 28.4 V Protection class: IP23 Year of manufacture: 2023 If you have any questions or require further information, please feel free to send us a message or give us a call.

Year of construction: 2011, condition: ready for operation (used), Coating/varnishing machine manufactured in 2011. This CEFLA Smartparquet MRF-2VS/300 features a working width of 300 mm and a total installed power of 6 kW. If you are looking to get high-quality coating capabilities, consider the CEFLA Smartparquet MRF-2VS/300 machine we have for sale. Contact us for further details. Iodpozuhd Dofx Ak Ajif • Main electronic connection: V 400 Hz 50 • Power consumption: KW 6 • Roller coating / varnishing machine • Measurements width: 300 mm working width

Year of construction: 2010, condition: like new (used), functionality: fully functional, MFT 30/300S Set – Used Professional Equipment For sale, a professional set in excellent condition, ready for immediate use. The set includes: MFT 30/300S Big Bag Iijdjzncrpopfx Ak Aef FAS 300 with mobile suction unit This set provides a complete solution, ideal for professionals seeking high-performance, robust, and operational equipment for use in a workshop or on a construction site. Optional: Rapid Vario 70 Primus available as an additional unit for an extra €2,600. The equipment has been carefully maintained, offering excellent value for money compared to new equipment. Sale as a set is preferred.

Year of construction: 2021, condition: ready for operation (used), An automatic G.A.V.O. Meccanica core cutting machine including a Debus filtration system is offered. 1) G.A.V.O. Meccanica core cutting machine, type: TCRG 300, year of manufacture: 2021, outside diameter range: 80mm-230mm, optional max. outside diameter: 330mm, max. loading length: 3000mm, max. cutting length: 3000mm, min. cutting length: 15mm, min. wall thickness for cardboard cores: approx. 4-5mm, min. wall thickness for plastic cores: approx. 2-3mm, output: approx. 180-300 cuts/h, control: Siemens, cutting length tolerance: +/-0.3mm. 2) Debus filtration system, type: DES DUS 1813, year of manufacture: 2018, extraction capacity: 30m³/min. Documentation available. Inspection possible by arrangement. Isdjzrzn Dopfx Ak Aoif