Used Holzma Hpp 300/43/43 for sale (14,691)

Condition: used, machine/vehicle number: 008504, Max. panel width: 2200 mm Max. panel length: 3800 mm Max. panel stack height from the ground: 640 mm Bledpjy Hcdxefx Aprsh Lifting capacity: 7000 Kg

Condition: excellent (used), CATALOG NO. 6985 TECHNICAL DATA - Max workpiece width: 300 mm - Max workpiece height: 200 mm - Unit: grooved rubber roller + pad + metal roller - Working table: 1230x440 mm - Belt: 300x1900 mm From above: - Rubber slip roller - Unit approx. 7.5 kW - Rubber slip roller From below: - Traction belt - Pneumatic oscillation - 2 feed speeds - Feed motor 0.85 kW - Extraction port diameter: 110 mm - Dimensions (L/W/H): 1250/1000/1950 mm - Weight: 530 kg - Not painted - Used sander - Very good condition Bsdey Drn Uepfx Aprjlh Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of greater exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2013, Equipment: documentation/manual, Machine KraussMaffei KM650-4300 GX Clamping force kN: 6500 Clearance between tie bars ( h x v ) mm: 1110 x 960 Mould opening stroke mm: 1450 Mould height min. mm: 450 Mould height may. mm: 1000 Ejector stroke mm: 250 Screw diameter mm: 90 (mixing HPS-M) L/D ratio: 20 Injection pressure bar: 1839 Stroke volume cm3: 2290 Control version: MC5 Screen text: Germany Condition: Checked, ready to work Equipment: \- Anti-vibration levelling pads \- BluePower - Servo pump drive for lower energy consumption \- Wear resistant plasticizer, surcharge \- BluePower - Complete insulation of plasticizing cylinder for lower energy consumption \- 2 x pneumatic valve on moving platen for blow function \- 2 x pneumatic valve on fixed platen for blow function \- Pneumatic cascade control, 4-fold for hotrunner \- Hydraulic cascade control, 4-fold for hotrunner \- Conveyor control \- Mechanical robot interface according to EUROMAP 18 \- Hydr. actuated ejector plate including tapped holes and clearance holes in the moving platen for ejector bolts \- Hydraulic core pull system 2-fold on moving platen \- Hydraulic core pull system 2-fold on fixed platen \- Pneumatic core pull system 1-fold on moving platen \- Pneumatic core pull system 1-fold on fixed platen \- Pressure relief for hydraulic core pulls \- Pressure relief for hydraulic cascade valves \- 20 hotrunner control circuits \- Combination of sockets (3 Sockets, single phase, 2 CEE sockets 16 A, 1 CEE socket 32 A) \- Potential-free contact for signal "plasticizing" on socket HAN 3 A Blsdpfxjy Apdqe Aproh \- Switch over to holding pressure depending on cavity pressure (Kistler) \- Quality statistics \- Chip card reading unit \- Graph display and analysis package with 10 graphs \- Trend graphics \- PV-closed loop control \- Interface for production data consisting of 5 potential free contacts inside the control cabinet \- 3 free programmable in- and outputs in the control cabinet: KraussMaffei Linear Robot LRX 350: \- Fully integrated control \- Horizontal stroke: 4000 mm \- Vertical stroke (telescopic): 2000 mm \- Demolding stroke: 1200 mm \- Maximum payload: 35 kg

Condition: new, functionality: fully functional, power: 110 kW (149.56 HP), fuel type: electric, color: other, overall weight: 21,360 kg, Year of construction: 2026, Jaw Crushers generally crushes 200 to 300 tons per hour, according to their capacity. Higher capacity jaw crushers can be produced according to customers needed. The jaw crushers are generally used to crush the hardest rocks such as basalt, granite, and gabbro. With its strong and durable jaw structure, it has been one of the most preferred crushers of the mining industry for many years. With jaw adjustment you can get the desired product and desired capacities very well. It can be easily adjusted by its hydraulic pistons. GENERAL SPECIFICATIONS AND FUTURES: -Belt-pulley drive system -Jaw Plates manufactured from custom made cast high manganese steel with a high level of wear resistance -Eccentric shaft manufactured from Cr, Ni, Mo alloyed forged steel -Adjustable jaw opening with hydraulic setting -Utilizing toggle plates for safety purposes in case of overloading -The surfaces which exposed to abrasion are coated with lining plates TECHNICAL SPECIFICATIONS: • Model: FABO CLK 1175 • Type: Primary Jaw Crusher Bsdpfxoy Dpl Re Aprelh • Inlet Dimensions: 1070 x 760 mm • Jaw Opening: 45-160 mm • Max Feeding: 760 mm • Capacity: 200 to 300 Ton Per Hour • Motor: Heavy duty GAMAK, 110 Kw • Bearings: Heavy duty SKF-FAG • Weight: 21360 kg • Dimension: 2730 x 1698 x 2492 mm • Including motor and safety guards. *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, mileage: 4,56,000 km, power: 316 kW (429.64 HP), first registration: 04/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, loading space length: 8,500 mm, loading space width: 2,550 mm, loading space height: 1,150 mm, Year of construction: 2015, Equipment: ABS, air conditioning, crane, MERCEDES ANTOS 2543 Platform 8,50 m + CRANE + REMOTE CONTROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2015 ? MILAGE: 456 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH PLATFORM: 850 x 255 x 115 (L x W x H) CAPACITY: 10 000 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 575/135 cm TIRE SIZE: FRONT : 385/65R22,5 BACK : 315/80R22,5 FRONT : SPRING BACK : AIR CRANE: PALFINGER PK 33002 - EH C + REMOTE CONTROL TEL: Bsdpfxey H Ub Ne Aprelh KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? : 3850

Condition: used, mileage: 4,56,000 km, power: 316 kW (429.64 HP), fuel type: diesel, gearing type: automatic, axle configuration: 3 axles, overall weight: 26,000 kg, first registration: 04/2015, loading space length: 8,500 mm, loading space width: 2,550 mm, loading space height: 1,150 mm, color: white, brakes: retarder, Year of construction: 2015, Equipment: ABS, air conditioning, crane, MERCEDES ANTOS 2543 Platform 8,50 m + CRANE + REMOTE CONTROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2015 ? MILAGE: 456 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH PLATFORM: 850 x 255 x 115 (L x W x H) CAPACITY: 10 000 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 575/135 cm TIRE SIZE: FRONT : 385/65R22,5 BACK : 315/80R22,5 FRONT : SPRING BACK : AIR CRANE: PALFINGER PK 33002 - EH C + REMOTE CONTROL TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR Bsdpfxsy H Ub Aj Aprslh COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? : 3850

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, ANAYAK HVM 5000 FIXED-BED MILLING MACHINE CNC HEID. TNC 430 X 4300 Y 1200 Z 1400 Table 5000 x 1000 Automatic head, tilting 2.5° x 2.5° Blodpfx Ajy Tt Aloproh Spindle 3000 rpm - ISO 50 Automatic tool changer (ATC) with 40 positions Renishaw Chip conveyor Available for inspection while in operation

Condition: ready for operation (used), Year of construction: 2010, operating hours: 60,159 h, clamping force: 5,000 kN, screw diameter: 90 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, This 3s Krauss Maffei 500-4300 CX was manufactured in 2010. It features a clamping force of 5000 kN and a maximum shot weight of 2084 g, making it suitable for high-quality injection molding applications. With a screw diameter of 90 mm and an injection pressure of 1839 bar, this machine offers robust performance. Consider the opportunity to buy this Krauss Maffei 500-4300 CX hydraulic injection moulding machine. Contact us for further details. • Clamping unit • Tool weight: DS 3950 kg / AS 5260 kg (total 7900 kg) • Min. tool diameter: 560 mm • Opening stroke: 1170 mm • Tool installation height: min 480 mm; max – • Max plate spacing: 1650 mm • Mounting plates (H × V): 1270 × 1200 mm • Clear column spacing: H 900 mm / V 800 mm • Centering ring diameter: 200 mm • Ejector • Stroke: 250 mm • Ejection force: 95.4 kN • Retraction force: 48.6 kN • Pneumatic ejector: yes • Core pulls / controls • Core pull control: 2 (AS) + 2 (DS) • Closing nozzle: 2 hydraulic / 0 pneumatic • Process control (SPC): yes (Kistler, p=2 / t=0) • Printer interface: no / 12-port USB • Hot runner control: no • Injection unit 1 • L/D ratio: 20 • Screw diameter: 90 mm • Max. stroke volume: 2290 cm³ • Max. shot weight (PS): 2084 g • Injection pressure: 1839 bar • Plasticizing rate: 185.8 g/s • Screw speed: 270 rpm • Nozzle bore: 6 mm • Pump power / Heating power: 90 kW / 44 kW • Other • Max. crane load: 10 tons • 2K-capable: no • Filter nozzle/mill: no Blsdpfx Apjyg Hz Herjh • It is a standard fully hydraulic 2-plate clamping system with fully hydraulic screw drive and constant motor. • Operating hours: 60,159 h Additional equipment • Linear robot: KRC6-2 ARC-C • Axes: X/Y (standard), Z present

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 212 h, load capacity: 3,000 kg, lifting height: 4,300 mm, free lift: 1,585 mm, fuel type: diesel, mast type: triplex, construction height: 2,338 mm, fork carriage width: 1,260 mm, empty load weight: 4,440 kg, drive type: Diesel, construction width: 1,450 mm, Rough Terrain Forklift Load Center: 500 Mast Type: Triplex Bjdpfxswqtyfj Aprjlh Technical Condition: New Front Tire Size: Solidal 12 SL R4 Off-road Tread GESA Front Tire Condition: 80 - 100% Rear Tire Size: Solidal XTra 27x10-12 SKS Off-road Tread GES Rear Tire Condition: 80 - 100% Battery Voltage: 12V Load Backrest, 3rd Valve, 4th Valve, Heater, Full Cabin, CE Certificate, Image may be a sample photo Paddle 100x45x1200 mm Exterior Mirrors Left and Right, Mechanically Suspended Plastic Seat, Road Lighting Halogen Front/Rear, Reinforced Battery Capacity 12V 110AH 750A, Radiator Metal Protective Grid, Ecostop, Raised Vertical Exhaust on Counterweight, Load Cushioning, Load Backrest Width 1260 mm LB1260, Mast Tilt 1210 Forward/Back, Rear Mud Flaps Rubber, Easy Link STD Module, Front Fender Extensions Metal, Total Width 1400 mm MI

Condition: ready for operation (used), Year of construction: 2000, cutting length (max.): 3,300 mm, This HOLZMA HPL 23/X/33/22/30/L was manufactured in 2000. A robust used panel saw featuring a cutting length of 3300 mm, 3 air cushion tables, and a lifting table measuring 3300 x 2200 mm. It includes a main saw with 18 kW power and a scoring saw of 2.2 kW, controlled by a CADMATIC system. Contact us for more information about this machine. • Cutting length: 3300 mm • Saw blade overhang: 125 mm • Main saw motor: 18 kW • Scoring saw motor: 2.2 kW Blsdpfx Apox D Hlfsroh • Control: CADMATIC Additional equipment • 3 air-cushion tables • Lifting table, 3300 x 2200 mm

Condition: used, machine/vehicle number: 008207, Max. panel width: 2200 mm Bodjx A Tiuepfx Aprolh Max. panel length: 3300 mm Max. panel stack height from the ground: 690 mm Lifting capacity: 7000 Kg

Condition: excellent (used), Numerical Control Power Control + Software Cadmatic 4 Professional No. 1 Infeed roller tracks (ca.) 32,000 mm Lifting table (mm) 5600 x 2200 VAC loader (sliding bridge) with fan suction for loading special or delicate panels 1° Rear-pusher, with No. 6 clamps/grippers Turning device (rotating unit) at 90° 1° Panel Saw - Max cutting width mm 5600 (cutting line with air cushion) Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 ( Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min 2° Rear-pusher, with No. 14 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 (cutting line with air cushion) Max blade projection (mm) 190 Bedpsvnq H Ejfx Aprslh Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 (Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min Waste evacuation system with grinder (Kw 19.5) No. 2 Front supporting tables with Air blowing system (mm 800 x 2160) Plastic wheels coated with special material to avoid scratching delicate panels Automatic unloading System of the cut panels: N° 2 x Liftomat HAU-A 25/12 Automatic Stacking System with 8 stations

Condition: used, 2x KWB Powerfire TDS 300 Wood Chip Boilers – approx. 600 kW For sale are two KWB Powerfire TDS 300 wood chip boilers, which were operated together in a cascade system. 👉 Total output: approx. 600 kW — Technical Highlights: • Rotary grate combustion system – robust, self-cleaning • Cyclone combustion chamber – clean combustion, low emissions • Lambda control – optimal efficiency • Fully automatic output modulation • Automatic heat exchanger cleaning • KWB Comfort 3 control system • Suitable for both wood chips and pellets — Advantages of the Cascade System: • Flexible performance adjustment as required • Very efficient in partial load operation • Each boiler can be operated independently • Redundancy / operational reliability Bljdoy A Ewtepfx Aproh — Scope of Supply: ✔ Includes feed auger on both boilers (ca. 1 m screw conveyor with drive motor, mounted directly on the boiler – feeds fuel directly into the combustion chamber) ⚠️ Note: No discharge / conveying system (fuel extraction from store) → available on request at additional cost — 📍 Location: Mosonmagyaróvár, Hungary 👉 approx. 80 km from Vienna 👉 approx. 35 km from Parndorf TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years of experience in heating technology. Our 1,500 m² warehouse in Mosonmagyaróvár, Hungary, maintains a permanent stock of approx. 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major city after the Austrian-Hungarian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log gasification boilers • Log boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers • Warm air heating units • Industrial heaters • Buffer tanks • Heat exchangers • Screw conveyors • Fuel extraction systems • Burners • Pumps • A comprehensive range of heating accessories ⚙️ Accessories and Components: We also offer a broad range of accessories, including circulation pumps, plate heat exchangers, and many other components for private to industrial applications. 🏭 Brands in our portfolio: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current offers: Most of our current offers can be found on our website: topheatingsystems.com We also have additional equipment in stock that is not yet listed online. 📅 Inspection: Viewing at our warehouse is possible by appointment. If interested, please contact us – we look forward to helping you find the right solution.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, 1 Panel Sizing Saw with Storage System Manufacturer: HOLZMA Model: PROFILINE HPL 530/56/22 – right-hand machine Year: 2008 Including integrated storage system PROFI TLF610/10/05/L Manufacturer: BARGSTEDT Year: 2013 Woodstore inventory management software, offcut management, etc. Storage area approx. 37 x 11.5 m Max. stack height in storage: 2,500 mm Speed Concept: sets completely new standards that revolutionize panel dividing technology. + Significantly higher speed and dynamic acceleration of the saw carriage. + Extreme acceleration of the program pusher. + Central angle alignment device. + Electronic height control of the pressure beam. + Optimized motion sequences via integrated gripper measuring system. Cutting length: 5,600 mm Cutting width (program pusher travel): 5,600 mm Panel rotation device for head cuts Laser guide light: marks the cutting line on the workpiece for visible or scribed cuts. Lift table feeding Lift table size: 5,600 x 2,200 mm PROFILINE VAC infeed carriage 5,600 mm Separate infeed carriage for gentle loading of sensitive single panels via vacuum, as well as efficient infeed of panel packs. Saw blade projection: 130 mm Saw carriage feed: Forward 1-150 m/min Reverse constant 150 m/min Program pusher speed: Forward/reverse 90 m/min (in EU countries forward = 25 m/min) Automatic pressure beam height control: yes Automatic cutting height: yes Adjustable pressure beam contact pressure: yes Adjustable gripper contact pressure: yes Gripper release: yes Fully air-cushioned machine table (saw body): yes Angle alignment device: Min. alignment width: 0 mm Max. alignment width: full cutting length Main saw motor (at 50 Hz): 18.0 kW Frequency control: 1,700 – 4,200 rpm Scoring saw motor: 2.2 kW Operating voltage: 400 V / 50 Hz Working height: 1,020 mm SPZ UNIT W. LIFT ELEMENT 2-FINGER 11/510/530 AUTOMATIC EJECTOR FENCE Program-controlled ejection of panel packs to the area of the air cushion tables. FULLY AUTOMATIC SCORING SAW ADJUSTMENT TYPE 530 Camera-controlled GROOVE PROGRAM (AUTOMATIC) Groove program with graphical input and sequence display. Positioning accuracy: Groove depth is steplessly variable via control (hydraulic stop). CUT-OUT/STRESS RELIEF CUTTING PROGRAM LABELLING WITH PART GRAPHICS LABEL PRINTER TYPE PICA 108 Thermal / thermotransfer label printing station Bjdoyw Ivhepfx Aprelh OPTIMIZATION PROGRAM 'CAD-PLAN' -JUST-IN-TIME- Additional 'Just-in-time' function (possible operating modes): 1. Optimization at the saw ----- - Possible import of part lists from industry packages, Excel, etc. - Incorporates available offcuts in optimization - In case of production interruption, unproduced parts can be re-optimized - Flexible selection of which parts with which material are optimized and produced at which time 2. Transfer of optimized data to the saw - Modification of optimized cutting plans at the saw: - Delete/add parts - Add available offcuts - Change panel sizes - Combine runs, etc. New optimization is performed directly at the saw. ONLINE DATA TRANSFER + USB PORT CAMERA MONITORING OF THE FEED AREA Material specifications for lift table feed: Max. waviness: 40 mm/m Panel thickness min. 6 mm Thickness tolerance per panel max. +/- 0.2 mm Stacking accuracy +/- 50 mm

Condition: good (used), functionality: fully functional, stroke length: 300 mm, throat depth: 450 mm, controller manufacturer: Delem, controller model: DA65, working width: 4,300 mm, bending force (max.): 300 t, distance between stands: 3,700 mm, control type: CNC control, number of support arms: 2, number of axes: 4, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Bending capacity: 300 Ton Bending length: 4.300 mm Distance between columns: 3.700 mm Back gauge: 550 mm Stroke length: 300 mm Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Return speed: 120 mm/sec. Controller: Delem DA65 Featured with: - Y1, Y2, X & R-axis controlled - CNC Hydraulic crowning - Various sets of bending tools - Laser safe curtain Lazer Safe - Machine manual and documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21.500 kg Blodeydpxvjpfx Apreh

Condition: good (used), Year of construction: 2020, DC motor, servo motor, geared motor, electric motor, DC geared motor -Manufacturer: Ott, Servo geared motor BLDC worm gear motor -Type: TBSL043030010-110 Bjdjyxcmqopfx Aprslh -Voltage: 24 V -Speed: 300 rpm -Transmission: Transtechno i= 10 -Shaft: Ø 14 x 63 mm -Quantity: 1x geared motor available -Dimensions: 215/63/H95 mm -Weight: 2.3 kg.

Year of construction: 1991, condition: used, machine/vehicle number: K2940, pression: 150 t working width: 4300 mm clear support width: 3600 mm support throat: 300 mm max. assembly height: ca. 500/700 mm Blsdpfj Dnf Ujx Apreh working speed: auf-/abwaerts 41 - 65/10 mm/sec rear stop: 1000 mm electrical connection: 400 V, ca. 15 kVA kW weight: 14 t space needed: 4600 x 1950 x 3100 mm

Condition: ready for operation (used), working width: 3000 mm metal sheet thickness: 4 mm throat: 100 mm rear stop: 500 mm power: 380 V, 7,5 kW space needed: 3400 x 1600 x 1700 mm Blodpfoh D E Hhsx Aprsh weight: 4500 kg

Year of construction: 2001, operating hours: 22,539 h, condition: ready for operation (used), This HOLZMA HCL 11/56/22 was manufactured in 2001. It features a maximum panel size of 5600 × 2200 mm and a cutting length of 5600 mm for longitudinal sawing. The saw blade projects up to 125 mm, and it includes a turning station sized 1250 × 1250 mm. With a lifting capacity of 10 tons and a maximum lifting height of 1430 mm, consider the opportunity to buy this HOLZMA HCL 11/56/22 panel saw. Contact us for more information. Application Types Bjdpfx Aox D Exdjprolh Sawing (Wood)

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 98600 € 1863.54 € 3100 mm 16 mm 16 mm 13 mm 16 mm 14 mm 12 mm 300 mm 300 mm 240 mm 50 mm 1140 mm 18.5 kW 5310 mm 1660 mm 1140 mm 11100 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control Blodpoynm Hfofx Aproh upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity

Condition: used, Year of construction: 2006, functionality: limited functionality, machine/vehicle number: 0084603, workpiece width (max.): 300 mm, Equipment: double-sided, VG FANTASTIC 300 SANDER CALIBRATION VG MACHINES MODEL DOUBLE-SIDED FANTASTIC F/G 300 - 3KKS/3KKS - Working width: 300 mm - Total installed power: 37 kW - Configuration: RRT/RRT (lower roller + upper roller) Bledpfxoxiycuj Aprsh - Motors: 2x (7.5 + 7.5 + 7.5) Belt width: 1900 x 300 mm

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 1,000 kg, mesh size: 50,100 mm, 300 x wire mesh decking for pallet racking (Euro pallets) approx. 88 cm x 110 cm, galvanized Load capacity 1,000 kg (with evenly distributed load) For beams 182.5 cm + 270 cm long with 4 cm beam thickness Shipping / Delivery: - max. 7 business days after receipt of payment - delivered free to site / installation location - Unloading from truck to be carried out by the buyer using their own lifting equipment Bjdpjyzb Acefx Aprelh - Deliveries within the entire territory of Germany, excluding islands! Deliveries to EU countries by individual arrangement.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: M2019011975, cooling capacity: 430 kW (584.64 HP), Carrier Chiller 30 RBP-430-0095-PE (AquaSnap Series) Type: Air-Cooled Liquid Chiller Model: 30RBP-430-0095-PE Variant: 30RBM/RBP Serial Number: M2019011975 Year of Manufacture & Test: 06/2019 Manufacturer: Carrier SCS, Montluel, France (United Technologies, Carrier Corporation, USA) Technical Specifications: Nominal Cooling Capacity: 430 kW Refrigerant: R-410A Bsdpjxb D Raofx Aprslh Circuit A: 23.50 kg / Circuit B: 26.70 kg Total Charge: 50.2 kg GWP: 2088 Compressors: Danfoss Scroll SH240A4ACE (thermally protected) Power Supply: 400 V / 3 Ph / 50 Hz Maximum Current Draw: 340 A Maximum Starting Current: 210 A Power Input: 210 kW Operating Temperature Range: –20 °C to +52 °C Net Weight: 2760 kg Protection Rating: IP54 Pressure Data Refrigerant: R-410A Allowable Pressure (Min/Max): High side (PS): –1.0 / 44.2 bar (–99.0 / 4420.0 kPa) Low side (PS): –1.0 / 31.1 bar (–99.0 / 3110.0 kPa) Safety Relief Valve Setting: 42 bar Rupture Disc Setting: 45 bar Test Pressure: 15.0 bar (unit leak test) Additional Information: Air-cooled design with axial fans and integrated condensers. Electrical control panel with Carrier management system. Hermetically sealed system, original Carrier service log included. Serviced and maintained by official Carrier service centre.

Condition: ready for operation (used), Year of construction: 2011, This HOLZMA PROFI HQP 11/16/56/L/X was manufactured in 2011. It is an optimizing cross-cut saw designed for precision and efficiency in wood processing. Ideal for businesses aiming to enhance their woodworking capabilities. Contact us for more information. Machine Benefits Technical Machine Benefits • Cross cutting aggregate • Cutting length: 1600 mm • Depth cutting aggregate • Cutting length: 5600 mm • Vacuum feeding device – for precise and automated material handling • Outfeed roller conveyor – ensures smooth transfer of cut parts Bjdpfoyaii Hjx Aprslh Extra Information Machine still under power

Condition: excellent (used), Year of construction: 2011, Screen PT-R 4300E Bodpsx T Tftjfx Aprolh Year of manufacture: 2011 SCL automatic plate loading Plates imaged: 114,000 Fuji 1-Bit Tiffbox Good condition.