Used Hydraulic Horizontal Bending Press for sale (30,195)

Condition: used, machine/vehicle number: 4396, pressing force: 200 t, pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t draw back pressure:20 t :1 Stück voltage:400 V frequency:50 Hz Dcodjfxyh Aspfx Aa Neg :24 V :Rexroth/Bosch dayligth:800 mm working area:1200x1000 mm :1200x1000 mm work height max.:1100 mm :170 mm/sek. :150 mm/sek. :15 mm/sek. quantity of oil:500 l :220 V memory:200 Programme :20-200 über Monitor t :5-170 mm/sec. :0-10 sec :2-10 mm/sec :750x950 mm :300 mm :5-50 t :2-80 mm/sec :1000 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 700 t, stroke length: 1,500 mm, overall weight: 50,000 kg, Equipment: documentation/manual, Press used for composites, until now it worked in Belgium. In July 2015 the press underwent a thorough modernization, the year of production of the device is 1990, however the modernization was very extensive. The press was used very little, it worked in a research institute. Due to the power cut, I could not check the mileage, but the device looks like new, there are no signs of wear of the working elements. The press is currently in Poland, 63-300 Pleszew, Poland. Dodpfxowtbc Tj Aa Nscg Pressure 700T. Dimensions of the upper foot 180x240. Foot stroke approx. 150cm. The press was used to develop the famous carbon space frame AUDI R8, it worked in a research and development institute near Brussels. Sometimes this device was also used for commercial production. The press looks practically like new. I have full modernization and technical documentation. The device was dismantled by me, in the sale price I add free assembly at the customer's, I will restore the device to the condition it was in before I dismantled the press. The buyer must provide a large forklift (approx. 44T), compressed air, and accommodation for 3 people for 14 days. I offer and pay for a team to assemble the device on site throughout Europe. It is very likely that the device will have to be configured for operation at the new buyer's, this task can be performed for an additional fee by a company from the Netherlands, which carried out a thorough modernization of the device in 2015, the estimated cost of such an operation depends on the buyer's requirements. The transport costs will be very attractive, because I have a friendly company that has very attractive delivery terms for me. The weight of the entire device is approximately 50T.

Condition: good (used), Year of construction: 1997, pressure 100 t stroke 300 mm table surface area 500 x 1520 mm column travel between the guideways 1520 mm dayligth 680 mm pressure max. 244 bar weight of tools max. 270 kg ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l voltage 400 V total power requirement 7.5 kW weight of the machine ca. 2700 kg dimensions of the machine ca. 2630 x 1000 x 2350 mm current new price approx. 18.000 euros special price on request according to previous owner rarely in use Equipment: - robust electro-hydraulic workshop/bending press * left right guided - with fixed working cylinder - Pressing depth adjustable by cams Dcsdpfx Ajy Dh Nzea Nsg - Height-adjustable work table - 2x locking bolts for table fixation - 3x directional control valve supply-empty-return - Stepless adjustment of working pressure - 1x freely movable 2-hand operation - Original operating instructions

Condition: ready for operation (used), Hydraulic Press Machine, Coil Winding Press Machine, Used Equipment Dimensions: 1340 x 1240 x 2740 mm Weight: 640 kg Electrical Specifications: 400V Dcsdpfx Aeu Hkfpsa Nog Hydraulic Pressure: 100 bar Stroke Length: 180 mm

Condition: new, pressure 28 t piston stroke 180 mm diameter of piston 130 mm table-size 300 x 550 mm working feed 2 - 9,8 mm/sek Dcedpfx Asqzmgqsa Nog return speed 20 mm/sec Max. pressure 200 bar bending capacity - flat iron 200 x 10 mm weight of the machine ca. 800 kg dimensions ca. 1150 x 1103 x 750 mm The horizontal hydraulic press (28 ton) can be used for many different metal working jobs. The press has a piston stroke of 192 mm and can be equipped with all kinds of tooling for specific bending or straightening jobs. We supply a standard toolingset with this press including a stampholder and backgauge. However, we also produce custom-made tooling for your specific request. Thanks to the NC-control you can easily set the cylinder stroke and save up to 100 working cycles. With this horizontal hydraulic press you are able to bend, straighten, notch, cut and form. A universal hydraulic press that serves all your needs in cold metal working processes.

Year of construction: 2016, condition: used, functionality: fully functional, Hydraulic Sawdust Briquetting Press PRODECO E60S Specification: • Condition – machine in excellent, perfectly maintained, 100% original • Manufacturer – PRODECO • Model – E 60 S • Briquette diameter: 60 mm • Motor power: 9.2 kW • Operating hours: 1,470 h • Hopper capacity: approx. 785 L (Diameter – 100 cm, Height – 100 cm) • Throughput, depending on processed material: 50 to 100 kg/h • Control: SIEMENS LCD, fully automatic, maintenance-free operation • Year of manufacture: 2016 • Weight: 770 kg • Overall dimensions: 180 x 120 x 160 cm (W x L x H) Additional information: • Machine is in perfect technical condition, ready for immediate operation • Provided photos show the actual condition of the item for sale • Possibility to start up and test the machine onsite • Free operator training (at company headquarters) • Price listed in the auction does not include VAT or transport costs Dedjy Ddp Rjpfx Aa Njcg Financing & Transport: • We organize transport via our MDD fleet, courier companies, or external carriers • Financial support available through leasing or lease loans

Condition: good (used), machine/vehicle number: 042-020/101, Single-column press with drawing cushion, good condition, immediately available Dedpfx Ajy Hq Ifja Nscg

Condition: repair required (used), machine/vehicle number: 084-024/1, Single-column press WMW Zeulenroda, has not been used, therefore must be inspected. Dedpfxsy Hq Hhe Aa Njcg

Condition: new, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). You save -24% compared to the RRP! TIGERMETAL WH150 – Hydraulic Workshop Press 150 Tons | Electric + Manual Pump The TIGERMETAL WH150 workshop press is a powerful industrial press designed for the most demanding applications in workshops, production, and maintenance. With a pressing force of 150 tons, the machine is ideal for heavy-duty straightening, pressing, and bending operations in professional environments. Thanks to the combination of electric drive and manual hand pump, the press allows both fast operation and highly sensitive, precise pressure control – especially for delicate workpieces. 🔧 Technical Data: Model: WH150 Manufacturer: TIGERMETAL Pressing force: 150 tons Drive: Electric motor + manual pump Motor power: approx. 4 kW Connection: 400V – 16A – 50 Hz Max. working pressure: approx. 310 bar Stroke: approx. 400 mm Working width: approx. 1200 mm Max. working height: approx. 1000 mm Weight: approx. 1080 kg Advantages: ✔ Combined operation (electric + manual) ✔ Extremely high pressing force for heavy-duty applications ✔ Precisely controllable pressure ✔ Laterally movable cylinder ✔ Height-adjustable crossbeam ✔ Heavy-duty, durable steel construction ✔ Integrated pressure gauge (manometer) ✔ Safety valve for overload protection ✔ Optionally expandable with accessories The WH150 is the ideal solution for anyone looking to combine maximum pressing power with the highest level of precision, flexibility, and industrial reliability. The laterally movable cylinder and height-adjustable working table ensure maximum flexibility and optimal adaptation to a wide variety of workpieces. The massive steel construction guarantees maximum stability, safety, and a long service life – even under intensive industrial use. Some images may show a slightly different version than the one offered here. The version shown in some pictures may include an additional automatic function. A wide range of additional workshop presses in various designs, sizes, and with optional equipment is available! Dcjdof Sqckjpfx Aa Njg Available versions: 30 tons 60 tons 100 tons 150 tons 200 tons 200 tons: on request Custom machines: on request New machine! We are also happy to manufacture a custom-built press tailored to your requirements. A demonstration machine can be tested on-site under power. ----- Please feel free to contact us – we will be happy to advise you without obligation. ----- The stated price is net plus 19% VAT. All information without guarantee! Delivery available throughout Europe! The European Commission provides a platform for online dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, fax, phone, messaging platforms). You will first receive a non-binding offer including our general terms and conditions as well as information on your right of withdrawal before any purchase/contract is concluded.

Condition: used, Year of construction: 1984, functionality: unexamined, Single-column press 250 t has not been used. Sold on behalf of customer. Inspection possible by appointment. Dcjdpfxey Hgk Ae Aa Njg

Condition: new, Year of construction: 2026, machine/vehicle number: PRASA HYDRAULICZNA TYPU C HPW 50 50 TON, functionality: fully functional, input voltage: 400 V, pressing force: 51 t, stroke length: 200 mm, table width: 400 mm, table length: 500 mm, pressing speed: 18 mm/s, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional machine designed for precise and demanding machining operations. Thanks to its C-frame construction, it provides easy access to the working area, allowing the processing of larger components and convenient handling of material from different sides. Key Features High pressing force – ideal for bending, straightening, pressing, and assembling components. Dcodpfeyr D R Nsx Aa Neg C-frame construction – improved ergonomics and excellent accessibility to the working area. Solid steel frame – ensures durability and safe operation. Precise hydraulic control – smooth adjustment of force and operating speed. Industrial and workshop applications – perfect for both large manufacturing plants and smaller workshops. Thanks to its versatility and robust construction, this press is suitable for many industries, from automotive and metalworking to technical service centers and tool shops. Specifications Pressing force: 500 kN (approx. 51 tons) Maximum pressure: 25 MPa Maximum opening: 500 mm Stroke: 200 mm Table dimensions: 500 × 400 mm Throat depth: 200 mm Downward speed: 19 mm/s Return speed: 18 mm/s Motor power: 4 kW Delivery to the customer is possible. The delivery cost is determined individually according to the quotation of the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: new, functionality: fully functional, Year of construction: 2026, input voltage: 400 V, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional machine designed for precise and demanding machining operations. Thanks to its C-frame construction, it provides easy access to the working area, allowing the processing of larger components and convenient handling of material from different sides. Key Features High pressing force – ideal for bending, straightening, pressing, and assembling components. C-frame construction – improved ergonomics and excellent accessibility to the working area. Solid steel frame – ensures durability and safe operation. Precise hydraulic control – smooth adjustment of force and operating speed. Dsdpfxoyr Ek Rj Aa Nocg Industrial and workshop applications – perfect for both large manufacturing plants and smaller workshops. Thanks to its versatility and robust construction, this press is suitable for many industries, from automotive and metalworking to technical service centers and tool shops. Specifications Pressing force: 250 kN (approx. 25.5 tons) Maximum pressure: 25 MPa Maximum opening: 500 mm Stroke: 200 mm Table dimensions: 500 × 400 mm Throat depth: 200 mm Downward speed: 10 mm/s Return speed: 14 mm/s Motor power: 3 kW

Condition: new, functionality: fully functional, Year of construction: 2026, input voltage: 400 V, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional machine designed for precise and demanding machining operations. Thanks to its C-frame construction, it provides easy access to the working area, allowing the machining of larger components and convenient handling of materials from different sides. Key Features High pressing force – ideal for bending, straightening, pressing, and assembling components. C-frame construction – improved ergonomics and better access to the working area. Solid steel frame – ensures durability and operational safety. Precise hydraulic control – smooth adjustment of force and operating speed. Industrial and workshop applications – suitable for both large manufacturing plants and smaller workshops. Thanks to its versatility and robust construction, this press is suitable for many industries, from automotive and metalworking to technical service centers and tool shops. Specifications Pressing force: 1000 kN (approx. 102 tons) Maximum pressure: 25 MPa Maximum opening: 600 mm Stroke: 300 mm Table dimensions: 700 × 500 mm Throat depth: 250 mm Downward speed: 11 mm/s Return speed: 25 mm/s Motor power: 5.5 kW Delivery to the customer is possible. Shipping cost is calculated individually by the transport company. Dodpfxeyrr Rko Aa Njcg

Condition: used, Single-column hydraulic press EXNER Type EEX 20 S - Machine no.: 1615 Year of manufacture: 1980 - Pressing force: 20 tons - Throat depth: 180 mm - Table size: 380 x 350 mm - Table opening: Ø 50 mm - Ram surface: 310 x 250 mm - Clamping shank: Ø 35 mm - Ram stroke: 100 mm - Max. installation height: 250 mm - Table height above floor: 900 mm - Descent speed: approx. 480 mm/s - Return speed: approx. 480 mm/s - Working speed: 20 mm/s - Hydraulic tank capacity: 110 liters - Hydraulic operating pressure at 20 tons: 200 bar - Motor output: 4 kW - Power connection: 400 Volt, 50 Hz - Stroke release via two-hand control or light barrier - Operating modes: setup, two-hand operation, BWS - SICK light curtain, type LVU, with single- and double-stroke settings and safety function - Rapid approach and working stroke - Stroke limitation dependent on pressure or travel - Mechanically adjustable solid stop - Press force adjustment manually via knurled wheel - Control cabinet mounted on the side of the machine - Operating manual and electrical schematics included Dsdpfxsyz Dtds Aa Njcg - Stroke counter - Space requirement (L x W x H): 1250 x 750 x 2000 mm - Weight: 1.4 tons In good condition

Condition: used, Double-column Hydraulic Press SCHÖN Type SH 25 Machine No. 2440 Year of manufacture: 1979 Press force: 25 tons Column spacing: 630 mm Lateral passage between columns: 120 mm Table area: 580 x 320 mm Ram area: 360 x 220 mm Clamping pin hole: Ø 40 mm Maximum ram stroke: 100 mm Maximum installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Power supply: 380 Volt, 50 Hz - Main cylinder overhauled in 2025 - SICK LUV 206 safety light curtain Dodpfx Aajyz Dr Tj Necg - Two-hand control - Stroke counter - Rapid stroke and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Press force regulation - Press time extension 1–10 s (pressure holding time) - No operating manual and no wiring diagrams Required space (L x W x H): 1450 x 1100 x 2200 mm Weight: 1200 kg In good condition

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 354, total length: 2,150 mm, total height: 1,600 mm, total width: 850 mm, controller manufacturer: Siemens, Equipment: CE marking, MACHINE DETAILS Control manufacturer: Siemens Control type: CNC Motor power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 2,150 x 850 x 1,600 mm Dcodpfx Aaoy Avuvj Nog Transport weight: 800 kg Transport packages: 1 EQUIPMENT Documentation CE marking

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, type of input current: three-phase, table width: 805 mm, table length: 1,205 mm, oil tank capacity: 250 l, total length: 2,050 mm, total width: 1,410 mm, total height: 3,200 mm, overall weight: 8,000 kg, DGUV certified until: 08/2020, pressing speed: 11 mm/s, Equipment: documentation/manual, safety light barrier, For sale: fully operational and complete Ageo 160t hydraulic press. Full documentation and maintenance logbook are available. On-site inspection possible. VAT invoice provided. Dodpfx Aeyxg D Hea Nscg

Condition: like new (used), Year of construction: 2008, machine/vehicle number: 461/08, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, total length: 1,370 mm, total width: 1,470 mm, total height: 2,900 mm, overall weight: 8,700 kg, The hydraulic press is like new. It has 5,000 operating hours and has worked at minimal pressures, with a maximum of 50 tons. It has been regularly serviced by the manufacturer, Energo. The press is highly precise, with a pressing depth accuracy of 0.01 mm, and features programmable multi-step simultaneous operations where you can set the depth, pressure, and pressing speed. It is connected to the electrical grid and ready for operation. Dcjdpfx Aey E N U Uja Njg

Condition: excellent (used), pressure 16 t weight of the machine ca. 16 t Dcjdeyrhmhepfx Aa Njg

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,280 mm, total height: 2,700 mm, total width: 2,000 mm, overall weight: 11,000 kg, input voltage: 400 V, type of input current: three-phase, warranty duration: 12 months, PRESS BRAKE 200T × 3200 mm The press brake is used for forming sheet metal. During the slider cycle, the sheet metal can be bent to match the required geometric cross-section. The machine can be used in many industries – electromechanical industry, light industry, agricultural machinery manufacturing, shipbuilding, automotive industry, aerospace industry, etc. Machine Functions Back gauge position control Intelligent position control Recall functions Automatic reference point search Backup and restore parameters with a single identifier Fast position indexing Memory for 40 machining programs, each with 25 steps Power failure protection Technical Data Pressing force: 200 T Maximum workpiece length: 3200 mm Distance between columns: 2530 mm Throat depth: 320 mm Ram stroke: 200 mm Maximum opening height: 455 mm Motor power: 11 kW Weight: 11000 kg Machine dimensions (L × W × H): 3280 × 2000 × 2700 mm Equipment Controller MTP-3212 Ball guides for back gauge Two back gauge fingers Two front supports Cylinder covers Optical light curtains (front) Safety gates (rear) Foot pedal AMADA-type punch holder Four-side lower die prism Back gauge driven by electric motor Segmented punch with possibility to remove a damaged segment Delivery Conditions The machine is brand new 12-month warranty Warranty service Post-warranty service CE declaration of conformity Operation manual in English Djdpfeyttbmox Aa Nscg Delivery to the customer is possible. Delivery cost according to an individual quotation from the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, The press brake is designed for bending sheet metal. During the ram stroke, the sheet can be bent and formed to the required geometric profile. The machine can be used in many industries, including electromechanical engineering, light industry, agricultural machinery production, shipbuilding, automotive industry, aerospace industry, and many others. Technical data Maximum sheet thickness: up to 6 mm Press force: 125 t Maximum bending length: 3200 mm Distance between columns: 2700 mm Throat depth: 320 mm Ram stroke: 120 mm Maximum opening height: 390 mm Back gauge travel: 600 mm Motor power: 7.5 kW Weight: 7500 kg Dimensions (L × W × H): 3870 × 1550 × 2400 mm Equipment Tools Front supports: 2 pcs Back gauge adjustment (X axis): servo drive Beam adjustment (Y axis): servo drive Back gauge finger height adjustment (R axis): manual Dcsdpfx Aaoytp N He Nog Punch clamping system: AMADA-type quick clamping Controller: MTP-3212 The CNC controller features an intuitive and user-friendly menu. The software automatically calculates the bending angle. Possibility to store up to 40 punch types. Large color touchscreen display readable from any angle. High-quality components High-quality German Rexroth hydraulic valves Electrical components from Schneider Electric Safety components from Omron and Schneider Steel hydraulic connections The use of steel hydraulic connections significantly reduces the risk of leaks in the future. Ergonomics Thanks to the mobile controller and the control panel mounted on a movable arm, the operator can work flexibly across the entire working area of the machine. Additional LED lighting ensures excellent visibility of the workpiece in all conditions. Discover a new level of comfort and efficiency with our innovative solutions. Safety Our press brakes are designed with maximum operator safety in mind. They are equipped with: clearly visible markings side guards rear safety gate easily accessible emergency switches light curtain preventing accidental access of hands between the punch and die during operation The machine is supplied with a Polish-language user manual, ensuring full understanding of safe operation. The machine also has a CE Declaration of Conformity, confirming compliance with all European safety and quality standards. Specialist assistance We maintain continuous contact with our customers. For every machine we provide technical support from our service engineers and specialists. Our specialists can: assist in determining bending steps for complex parts provide professional advice on selecting suitable materials and tools assist in selecting optimal working parameters for different materials We are here to support you at every stage of the process. Technical consulting Our specialists are available before purchase to help you select the right machine and accessories. Delivery to the customer is possible. Delivery cost according to the individual quotation of the transport company. If you are interested in other machines, please visit our website.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 2,155 mm, total height: 2,000 mm, total width: 1,469 mm, overall weight: 3,300 kg, input voltage: 400 V, type of input current: three-phase, warranty duration: 12 months, PRESS BRAKE 40T × 2000 mm The press brake is used for forming sheet metal. During the slider cycle, the sheet metal can be bent to match the required geometric cross-section. The machine can be used in many industries – electromechanical industry, light industry, agricultural machinery manufacturing, shipbuilding, automotive industry, aerospace industry, etc. Machine Functions Back gauge position control Intelligent position control Recall functions Automatic reference point search Backup and restore parameters with a single identifier Fast position indexing Memory for 40 machining programs, each with 25 steps Dcedpfx Aaeyttfre Nsg Power failure protection Technical Data Pressing force: 40 T Maximum workpiece length: 2000 mm Distance between columns: 1650 mm Throat depth: 200 mm Ram stroke: 100 mm Maximum opening height: 340 mm Motor power: 4 kW Weight: 3300 kg Machine dimensions (L × W × H): 2155 × 1469 × 2000 mm Equipment Controller E21 Ball guides for back gauge Two back gauge fingers Two front supports Cylinder covers Optical light curtains (front) Safety gates (rear) Foot pedal AMADA-type punch holder Four-side lower die prism Back gauge driven by electric motor Segmented punch with possibility to remove a damaged segment Delivery Conditions The machine is brand new 12-month warranty Warranty service Post-warranty service CE declaration of conformity Operation manual in English Delivery to the customer is possible. Delivery cost according to an individual quotation from the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: excellent (used), Year of construction: 2019, pressing force: 70 t, Equipment: documentation/manual, HSM HL 7009 Re / Li horizontal baler. The machine is in very good condition and regularly serviced by an authorized service center. This baler is designed for larger waste disposal projects in retail outlets and small and medium-sized central warehouses. Bales from the HL 7009 model have a cross-section of 1100 x 1100 mm and, with a bale length of 1200 mm, can weigh up to 600 kg, ensuring optimal utilization of the truck's payload. Pressing force: 700 kN Specific pressing force: 58 N/cm² Drive power: 10.5 kW Voltage / frequency: 400 V / 50 Hz Dcsdpey D Rxfjfx Aa Njg Idle capacity (theor.): 42.97 m³/h Loading opening width x length: 890 x 1020 mm Bale width x height x length: 1100 x 1100 x 1200 mm Total length x width x height: 5366 x 2525 x 2559 mm Bale weight: 600 kg

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Dcjdsya Iaqjpfx Aa Nsg Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: refurbished (used), Year of construction: 1995, machine/vehicle number: 4290, functionality: fully functional, pressing force: 30 t, stroke length: 300 mm, table width: 440 mm, table length: 320 mm, total height: 2,750 mm, installation height: 500 mm, overhauled Schoen double column press year 1997/2024 Pressing force 300 kN Installation height 500 mm stroke: 300 mm Table: W x D 440 x 320 mm Dsdpfx Aasu Hyx Se Nocg Machine will be overhauled: - new control - new light barrier - revision of the hydraulics