Used Kasto Hacksaw Machine & Power Hacksaw for sale (81,708)

Condition: used, Year of construction: 1996, cutting diameter 460 mm saw band length 8350 x 41 x 1,3 mm mm cutting width 1660 mm total power requirement 30 kW weight of the machine ca. 21.900 kg KASTO BBS 460/1660 2 identical machines (same photos; the other machine was built in 1998) Manufacturer: KASTO Maschinenbau GmbH & Co. KG Address: Industriestr. 14, D-77856 Achern-Gamshurst, Germany Type: BBS 460/1660 (Block Band Saw / Horizontal Bandsaw) Series: 101 Machine No.: 63191010041 Year of Manufacture: 1996 DIMENSIONS & WEIGHT Weight: 21.900 kg (data card) / approx. 17,700 kg (foundation plan) Material Support Height: 1,550 mm Machine Footprint (L x W x H): approx. 1.24 × 3.28 × 3.49 m Gujdpfx Aszmy S Rjhajf Minimum Installation Space (with accessories/options): approx. 20.19 × 10.67 × 3.95 m Cutting Range (at 90°) Round Material: Ø 460 mm Flat / Block Material: 1,660 × 460 mm SAW BLADE Standard Sizes: 8,350 × 54 × 1.3 mm or 8,350 × 41 × 1.3 mm Alternative (per data card): 8,350 × 54 × 1.3 mm Kerf Width (Set): approx. 2.4 mm Band Wheels: 3 × Ø 350 mm Recommended Quality: Super Bi-Metal Saw Blades (M42) for mild steels, high-alloy tool steels, and stainless steels For extremely hard materials: Carbide-tipped blades PERFORMANCE DATA Band Speed: infinitely variable 14 – 75 m/min Feed Rate (Step Feed): infinitely variable 0.7 – 220 m/min Electrical Connection: 400 V / 50 Hz / 30 kW (total connected load) Coolant Capacity: 6.5 l Noise Level: 73 dB(A) Function Manufacturer Type Power (kW) / Current (A) Speed (rpm) ----- Saw Motor Sieber VM6-1054/750/4 7.5 kW / 15.6 A 1500 Hydraulic Motor BauKnecht DT90-S4F 1.1 kW / 3.0 A 1500 Hydraulic Power Unit Rexroth UL 205S2016294/1 2.2 kW / 5.6 A 1500 Roller Track Motor SEW KG 35 1.2/4.8 kW / 4.6/10 A 750/3000 Band Speed Motor SEW KE66 DT 80 N 612 0.12/0.48 kW / 0.69/1.32 A 750/3000 Rapid Traverse (Eilgang) SEW KE66 DT 80 N 612 0.12/0.48 kW / 0.69/1.32 A 750/3000 Adjustment Motor Sieber DE26.18 kW / 0.6 A 3000 Coolant Pump Brinkmann TS12/190-65 0.27 kW / 0.63 A 3000 Coolant Pump Brinkmann TB 100/270 0.24 kW / 0.44 A 3000 Chip Conveyor Pump Huber + Moser 693/8F 0.08 kW / 0.65 A 750 Chip Conveyor SEW SA 42 DT 71 DB 0.12 kW / 0.69 A 750

Condition: used, Year of construction: 1996, cutting diameter 460 mm saw band length 8350 x 41 x 1,3 mm mm cutting width 1660 mm total power requirement 30 kW weight of the machine ca. 21.900 kg KASTO BBS 460/1660 2 identical machines (same photos; the other machine was built in 1996) Manufacturer: KASTO Maschinenbau GmbH & Co. KG Address: Industriestr. 14, D-77856 Achern-Gamshurst, Germany Type: BBS 460/1660 (Block Band Saw / Horizontal Bandsaw) Series: 101 Machine No.: 6319 101 004 Year of Manufacture: 1996 DIMENSIONS & WEIGHT Weight: 21.900 kg (data card) / approx. 17,700 kg (foundation plan) Material Support Height: 1,550 mm Machine Footprint (L x W x H): approx. 1.24 × 3.28 × 3.49 m Minimum Installation Space (with accessories/options): approx. 20.19 × 10.67 × 3.95 m Cutting Range (at 90°) Round Material: Ø 460 mm Flat / Block Material: 1,660 × 460 mm SAW BLADE Standard Sizes: 8,350 × 54 × 1.3 mm or 8,350 × 41 × 1.3 mm Alternative (per data card): 8,350 × 54 × 1.3 mm Kerf Width (Set): approx. 2.4 mm Band Wheels: 3 × Ø 350 mm Recommended Quality: Super Bi-Metal Saw Blades (M42) for mild steels, high-alloy tool steels, and stainless steels For extremely hard materials: Carbide-tipped blades PERFORMANCE DATA Band Speed: infinitely variable 14 – 75 m/min Feed Rate (Step Feed): infinitely variable 0.7 – 220 m/min Electrical Connection: 400 V / 50 Hz / 30 kW (total connected load) Coolant Capacity: 6.5 l Noise Level: 73 dB(A) Gujdpfx Ahezmy Sqjaef Function Manufacturer Type Power (kW) / Current (A) Speed (rpm) ----- Saw Motor Sieber VM6-1054/750/4 7.5 kW / 15.6 A 1500 Hydraulic Motor BauKnecht DT90-S4F 1.1 kW / 3.0 A 1500 Hydraulic Power Unit Rexroth UL 205S2016294/1 2.2 kW / 5.6 A 1500 Roller Track Motor SEW KG 35 1.2/4.8 kW / 4.6/10 A 750/3000 Band Speed Motor SEW KE66 DT 80 N 612 0.12/0.48 kW / 0.69/1.32 A 750/3000 Rapid Traverse (Eilgang) SEW KE66 DT 80 N 612 0.12/0.48 kW / 0.69/1.32 A 750/3000 Adjustment Motor Sieber DE26.18 kW / 0.6 A 3000 Coolant Pump Brinkmann TS12/190-65 0.27 kW / 0.63 A 3000 Coolant Pump Brinkmann TB 100/270 0.24 kW / 0.44 A 3000 Chip Conveyor Pump Huber + Moser 693/8F 0.08 kW / 0.65 A 750 Chip Conveyor SEW SA 42 DT 71 DB 0.12 kW / 0.69 A 750

Condition: used, Year of construction: 2015, Technical details: Guodpfx Ahjzl D Exeasf table length: 3000 mm table width: 1500 mm burner heads: 1 X-axis : 3000 mm y-axis: 1500 mm z-axis: 150 mm max. plate thickness : 20 mm weight of the machine ca.: 10 t 1 used CNC laser cutting system PRIMA POWER PLATINO FIBER Switching hours as of June 2024: 65,043 h Incl. - FIBERLASER power source IPG YLS4000 incl. chiller - Incl. STIMA automatic loading and unloading device for raw material and processed sheets for 2D laser machines Compat Server (compact tower) Manufacturer description: The Platino Fiber laser cutting machine is a result of the perfect balance of innovation and experience. This product combines state-of-the-art efficient and ecological fiber laser technology with the proven reliability and flexibility of the Platino platform. The Platino Fiber can be used to cut a variety of materials. Fiber lasers are more effective than other laser sources at cutting highly reflective materials (e.g. aluminum alloys, copper, brass). The Platino Fiber cuts various thicknesses, up to 20 mm of mild steel, with efficiency and quality. The productivity increases are particularly noticeable with thin to medium-sized sheets. Compact servers: is a loading and unloading device for handling blanks and processed sheets. Compact Server consists of two storage units - one for blanks and one for processed sheets. All components of the Compact Server are located above the automatic pallet changer and therefore require no additional floor space. The advantages of these solutions are: reliability, compactness and easy management of loading/unloading operations. The newest product from SPR Italy is a highly sophisticated automation system that combines many innovative solutions that are subject to SPR patents. The system is capable of unmanned operation and provides storage, loading and unloading within the smallest footprint possible. The tower is built above the shuttle table and the loading and unloading is done with the elevator that can be installed on either side of the tower. Simple operation and state of the art PLC contribute to a friendly integration and provide real productivity gain. The system is so compact that it became the top selling automation product, with many hundred of them sold world wide in just few years since it was launched. Compact Tower CT 1530 is capable to store a maximum of 54 ton of raw sheets dim. 1500x3000mm stacked in18 locations, with 80mm each stack, and to load raw sheets onto the machine table and unload processed sheets thereafter. For this example we will use a 18 pallet tower such as we already installed in Melbourne this year. The scope of the work includes the software implementation, the tests of the units at SPR factory, shipment, documentation and supervision during installation, start-up and commissioning Concrete foundation to the engineering specifications, civil works, mains electrical supply, permits and the base plates must be supplied by Customer. Major components The Compact Tower is composed with following main units: - tower to store the stack of sheet - elevator to move the pallet on which the stack of sheet is laid - table with fixed pins where the operator load the stack of sheet - gripper with suction cups - light barriers - electric cabinet with control panel - set of safety fences General features: Sheet format max. 3.100×1.570mm Max weight 3.000Kg per stack Max height stack

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2003031, total height: 1,550 mm, total width: 1,070 mm, total length: 1,670 mm, type of input current: AC, overall weight: 450 kg, input voltage: 220 V, Fully Servo Controlled Automatic Flow Wrapper / Pillow Packing Machine – KFD323 – Fully Working Fully automatic servo-controlled horizontal flow wrapping / pillow packing machine for sale. Godpfx Ajzt Ugvehajuf The machine is used, fully tested and in excellent working condition. It features a fully servo-controlled system, providing accurate and consistent control of product feeding, film movement, bag length and sealing. This is a high-speed industrial machine capable of running at up to 150 packs per minute, depending on the product, film and pack dimensions. The machine can be seen running and working before purchase, and a video of the machine in operation can also be provided. Main Specifications Model: KFD323 Machine Type: Automatic Horizontal Flow Wrapper / Pillow Packing Machine Control: Fully servo-controlled system Condition: Used – fully tested and working Production Year: 2020 Speed: 30–150 bags/min Power Supply: 220V / 50Hz Motor Power: 4.7 kW Heating Power: 2.1 kW Film Width: 80–370 mm Machine Weight: Approx. 450 kg Dimensions: Approx. 3670 × 1070 × 1550 mm Applications Suitable for high-speed automatic packaging of a wide range of products, including: Bakery products Biscuits and confectionery Food products Snack products Household products Hardware and components Medical/disposable products General consumer goods The machine produces professional pillow-style sealed packs and can be integrated into an existing production or packaging line. Condition The machine is fully operational and has been tested prior to sale. All main functions, servo controls, film feeding and sealing systems are working correctly. Ready to go straight into production. This is an excellent opportunity to purchase a fully servo-controlled high-speed flow wrapper at a fraction of the cost of a new machine. Viewing and inspection are welcome. A video showing the machine running is available on request. Please contact me for further information, additional photographs, videos, or to arrange a viewing.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Shenzhen ICM Technology Development Co., Ltd., controller model: 880W02, pipe diameter (max.): 38 mm, pipe length (max.): 3 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 190 °, bending radius (max.): 200 mm, bending radius (min.): 2 mm, mandrel length: 150 mm, number of axes: 2, table length: 3 mm, overall weight: 1,300 kg, total length: 3,900 mm, total width: 900 mm, total height: 1,400 mm, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, oil tank capacity: 80 l, number of digital displays: 1, warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, quick-change device, Full Automatic Pipe Bending Machine DW38CNC-2A-1S Gjdpfxsy Uuw Ts Ahaouf Equipped with a touchscreen and CNC control system; capable of storing up to 500 sets of parameter groups. Features a rebound compensation setting program, with built-in confidentiality protection for programs and processing data. Servo control is adopted for corner bending, pipe bending and material feeding functions. The operating system is protected by passwords and physical keys, and supports production quantity & runtime records for efficient production management. Comes with slow bending and slow core pulling functions. Fault messages are displayed on the screen to help operators troubleshoot problems promptly. Touchscreen This pipe bender is equipped with a Weinview industrial touchscreen for its operation interface, which delivers an intuitive operation experience and allows new operators to get started quickly. You can directly edit the pipe bending process parameters on the interface, such as feeding distance, rotation angle and bending angle, and separately set the running speed for each step. During operation, the interface displays real-time axis positions, bending progress and production cycle, and automatically counts total output and shift output to help you manage production efficiency effectively. It also supports manual single-step debugging, automatic continuous operation, program editing and equipment parameter setting. Different modes can be switched with one click, making it convenient for machine trial runs and mass production alike. Hydraulic solenoid valve manifold This integrated hydraulic solenoid valve manifold serves as the control center of the CNC pipe bender's hydraulic system. Adopting industrial-grade modular design, it integrates multiple solenoid valves to independently control the movements of the feeding axis, rotating axis, bending axis, as well as clamping, auxiliary pushing and other auxiliary mechanisms. Linked with the CNC system, it converts control commands into precise hydraulic power output, enabling smooth operation throughout pipe feeding, rotation and forming. Matched with high-pressure sealed hydraulic hoses, it maintains zero leakage and high stability under full-load operating conditions, delivering reliable performance for long-term mass production. Servo drive These four units are Mitsubishi servo drives equipped on our pipe bender, acting as the power core that governs key movements including material feeding, pipe rotation and pipe bending. Adopting Mitsubishi MR-JE series industrial-grade high-end servo drives, they feature high positioning accuracy and fast response. Both feeding distance and rotating angle can be controlled precisely with no deviation. With excellent stability, they rarely lose steps or malfunction during long-hour continuous operation. This ensures consistent bending precision for every pipe and a high finished product yield.

Condition: new, Year of construction: 2023, Laser source: Raycus 3 to 6kW Laser head: Raytools autofocus Structure: 2 horizontal chucks Gusdpjnkailsfx Ahaef Loading: 6.5m unloading 2.5m Software: CAD CAM Tubest, Tube pro (Windows 10) Tube diameter: 15-230mm Tube profiles: round, rectangular, square Options: - 3 D swivel head - Automatic bundle loader - Table loader - Conveyor unloader - Weld seam detection - Raybox - Extraction system

Condition: new, Year of construction: 2024, Basic configuration Laser source: Raycus Laser head: Raytool Autofocus Servo: Yaskawa System: FSCUT 5000 A Loading: manual Structure: 3 horizontal chucks CAD CAM: TubesT, TubePro Smoke extractor: Topsin 7.5kW with 6 filters Tube diameter: 15-350mm tube length: 0-4000/0-6000mm Maschinengröße: 13500x3400x2400mm Gedpfx Ahemx R S Neaeuf

Condition: new, Year of construction: 2022, Model DPL-1530HP-4 kW 8 levels, 3000x1500mm (300kg load per level) Loading and unloading system Laser Raycus 4 kW Control system FSCUT 2000ER Laser head Raytools BM115, autofocus Chiller Hanli 3.8 kW Air blower 11kW Nesting software Cypnest-Nesting Software Low-pressure gas alarm, gas pressure monitor, and software control Voltage stabilizer 48-72 KVA Enclosure according to Laser Class 4 Heavy-duty machine base. High-performance servo motors. Intelligent cutting control system, easy operation Fast tack welding, supported by segment and step tack welding technology Specialized air duct with oversized diameter, ensuring smooth fume extraction. Guedpfoci Ik Ssx Ahaof Completely enclosed design European CE standard Dual shuttle tables provide a high level of safety and convenience. Positioning accuracy ±0.05/1000mm Repeat positioning accuracy ±0.03/1000mm Acceleration 1.6 m/s² Max. speed 120 m/min Sheet metal loading capacity 1500 kg Size 8907×2813×2658 mm Laser power 6000 W Control system FSCUT 2000 Machine power 32-48 kW Voltage 380V/50Hz Delivery time: 5 months (construction time + transport) Delivery to customer's premises: €3,500 Installation and training: €8,850 Industry 4.0 software: €9,500 FILTERCUBE 2H, 4.0 kW, 40 m²: €10,500 The Filtercube series is a dust extraction system equipped with filter cartridges, used for fume filtration and dust removal.

Condition: new, Year of construction: 2024, Laser source: 12 kW Raycus/IPG Laser head: Precitec Pro-Cutter 2.0 Control system: FSCUT 8000 Effective working area: 1520x3050 mm Max. positioning speed: 120 m/min Gujdpfx Ahji Ar Rujaof Max. acceleration: 1.5 m/s² Positioning accuracy: 0.02 mm/m Repeatability: 0.03 mm/m Max. table load: 1500 kg

Condition: new, functionality: fully functional, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Nanjing Estun, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 0.5 °, stroke rate (min.): 15 1/min, stroke rate (max.): 15 1/min, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 4 mm, table height: 850 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge speed R-axis: 40 mm/s, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, control voltage: 400 V, oil tank capacity: 220 l, overall weight: 7,000 kg, total length: 3,950 mm, total width: 1,700 mm, total height: 2,150 mm, number of support arms: 3, warranty duration: 24 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, QC11K-8/3200 Guillotine shearing machine The frame adopts an all-steel welded structure, boasting sufficient strength and rigidity. Internal stresses are eliminated through normalizing and high-frequency vibration treatment to ensure the overall precision of the machine body. German large-scale floor-type boring and milling machines are employed for precision machining using a one-time processing method, guaranteeing exceptional machining accuracy. It features a hydraulic swing-type structure with an upper tool rest return device powered by nitrogen cylinders, enabling fast return speeds. The hydraulic system utilizes an integrated logic circuit controlled by sequence valves, ensuring stable operation, low noise, and straightforward maintenance. Tool rest movement is regulated by hydraulic valves for precise control. The material pressing device incorporates an integrated circuit and independent parallel clamping cylinders. When dealing with uneven sheet metal, the cylinders can expand and contract freely to securely clamp the material. The clamping force is adjustable according to the sheet material and thickness, preventing any damage to the sheet surface. Motorized adjustment allows for quick setting of the blade gap, offering simple operation to adapt to shearing requirements of different sheet thicknesses and materials. Control is achieved through a numerical control (NC) system, enabling fixed-stroke shearing operations. An optical line alignment device facilitates scribed line shearing for enhanced accuracy. The electrical control system is centralized and reliable, with the following key features: All power facilities are installed within the machine body, operated and controlled via buttons on the control panel. A foot switch is provided for direct and convenient operation of the shearing action. Core electrical components are sourced from Schneider for guaranteed quality and reliability. Circuit breakers are installed to protect the control circuit against short circuits. Motor thermal-magnetic circuit breakers provide protection against motor overload and short circuits. The hydraulic system is designed for safety and reliability: The hydraulic system manifold block is equipped with a direct-acting safety relief valve to ensure accurate pressure adjustment. A pipeline check valve is specially installed at the pump head to protect the oil pump from hydraulic shock. Both upper and lower blades are made of high-quality materials and undergo full heat treatment, ensuring sufficient hardness and a long service life. Godpfx Aey Uquhjhajuf The ball-rolling worktable and front material supporting device facilitate easy feeding while preventing scratches on workpieces during operation. The CNC back gauge device is equipped with high-performance servo motors, drives, precision ball screws, and linear guides, achieving a positioning accuracy of ≤±0.1mm. For the CNC electrical system:The back gauge is controlled by the E21S simple CNC system. Users can directly input the desired values, and the back gauge automatically moves to the specified position upon confirmation. Transmission is achieved through a motor-driven precision lead screw and nut assembly, with digital display via a counter. Fine-tuning for free size correction is not configured to ensure shearing precision, with an error of ≤0.2mm per meter. Three front support arms are fixed on the worktable, providing convenient placement for shearing materials.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Gedpfx Ahey Uiyvjaeuf Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 190 mm, roller (top) diameter: 210 mm, side roll diameter: 170 mm, roller diameter: 210 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 700 mm, working height: 700 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 5 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 15 mm, overall weight: 5,000 kg, total length: 4,600 mm, total width: 1,400 mm, total height: 1,700 mm, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, number of digital displays: 1, warranty duration: 24 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, W12-8X2000 Four-roller Plate Rolling Machine This machine is equipped with plate end pre-bending and CNC rolling functions. It allows the metal plate to be fed in one single pass, completing pre-bending and roll forming of the workpiece without the need for turning over the plate. The upper working roller serves as the main drive roller, while the lower roller and two side rollers are hydraulically driven. Their lifting strokes are controlled by the CNC system, enabling automatic leveling with a synchronous display accuracy of ±0.1 mm. The tilting and resetting of the tilting bearing housing adopts a hydraulic transmission structure, and the upper roller is equipped with a balancing mechanism to facilitate the removal of the finished workpiece. The machine comes with a movable independent control console for flexible repositioning at any time, and is equipped with safety interlock devices to ensure safe and reliable operation. Working Roll Material The working rolls are made of 42CrMo high-strength premium alloy steel, manufactured through forging, rough machining, and quenching & tempering heat treatment, achieving a bulk hardness of HB 240–300. After finish machining, they undergo medium-frequency induction hardening, resulting in a surface hardness of HRC 47–58. The products comply with the JB/ZG4289-86 standard for roll steel, ensuring uniform roll rigidity with a controlled deflection of (1/700–1/1000)L. Note: L refers to the center distance between the two side frames. The entire production process strictly follows the standard manufacturing flow for rolls, fully guaranteeing the comprehensive mechanical properties of the working rolls. Working Roll Rotation & Drive System The upper roll is the driving roll of the four-roller rolling machine. It is fitted with an independent hydraulic motor directly coupled to the heavy-duty gear housing, with no intermediate gear transmission. This is the most energy-efficient drive design. The hydraulic motor is equipped with an instant braking device, enabling accurate positioning of the roll shaft during pre-bending operations. Double-row spherical roller bearing Excellent Self-aligning Performance The outer ring adopts a spherical structure, allowing the inner ring and roller assembly to deflect within an angle of 1.5°~3°. It can automatically compensate for misalignment caused by installation errors and shaft deflection, preventing seizure and abnormal wear. Heavy Load & Impact Resistance Line contact between rollers and raceways enables the bearing to withstand extremely high radial loads as well as bidirectional axial loads, perfectly suited for heavy-duty working conditions of rolling machine rolls. Guedpfjy Ugtajx Ahajf High Durability Made of high-strength bearing steel with quenching and other heat treatments. Combined with a well-designed lubrication system, it ensures long-term stable operation under harsh conditions and greatly reduces downtime for maintenance.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Kasto KASTOwin pro AC 5.6 fully automatic band saw for metals (2017) Manufacturer: Kasto Type: KASTOwin pro AC 5.6 Gujdpfezl Tfhex Ahajf Year of manufacture: 2017 Condition: used, operational Operating hours: see photos. Scope of delivery: - Documentation

Condition: like new (used), Year of construction: 2025, functionality: fully functional, total height: 700 mm, table height: 700 mm, Feed roller track (original KASTO) Length: 5365mm Type: RB 3.0 Number of rollers: 13 Roller diameter: 90mm Gsdjzab U Uspfx Ahaouf Usable width: 660mm Upstanding side rollers: 7 (height 280mm) Unwinding protection: 7 (height 60mm) Load-bearing capacity: 3000 kg/m Demo model New purchase price: €10,810

Condition: used, Year of construction: 2015, Technical details: table length: 3000 mm table width: 1500 mm burner heads: 1 X-axis : 3000 mm y-axis: 1500 mm z-axis: 150 mm max. plate thickness : 20 mm weight of the machine ca.: 10 t 1 used CNC laser cutting system PRIMA POWER PLATINO FIBER Switching hours as of June 2024: 65,043 h Incl. - FIBERLASER power source IPG YLS4000 incl. chiller - Incl. STIMA automatic loading and unloading device for raw material and processed sheets for 2D laser machines Compat Server (compact tower) Manufacturer description: The Platino Fiber laser cutting machine is a result of the perfect balance of innovation and experience. This product combines state-of-the-art efficient and ecological fiber laser technology with the proven reliability and flexibility of the Platino platform. The Platino Fiber can be used to cut a variety of materials. Fiber lasers are more effective than other laser sources at cutting highly reflective materials (e.g. aluminum alloys, copper, brass). The Platino Fiber cuts various thicknesses, up to 20 mm of mild steel, with efficiency and quality. The productivity increases are particularly noticeable with thin to medium-sized sheets. Compact servers: is a loading and unloading device for handling blanks and processed sheets. Compact Server consists of two storage units - one for blanks and one for processed sheets. All components of the Compact Server are located above the automatic pallet changer and therefore require no additional floor space. The advantages of these solutions are: reliability, compactness and easy management of loading/unloading operations. The newest product from SPR Italy is a highly sophisticated automation system that combines many innovative solutions that are subject to SPR patents. The system is capable of unmanned operation and provides storage, loading and unloading within the smallest footprint possible. The tower is built above the shuttle table and the loading and unloading is done with the elevator that can be installed on either side of the tower. Simple operation and state of the art PLC contribute to a friendly integration and provide real productivity gain. The system is so compact that it became the top selling automation product, with many hundred of them sold world wide in just few years since it was launched. Compact Tower CT 1530 is capable to store a maximum of 54 ton of raw sheets dim. 1500x3000mm stacked in18 locations, with 80mm each stack, and to load raw sheets onto the machine table and unload processed sheets thereafter. For this example we will use a 18 pallet tower such as we already installed in Melbourne this year. The scope of the work includes the software implementation, the tests of the units at SPR factory, shipment, documentation and supervision during installation, start-up and commissioning Concrete foundation to the engineering specifications, civil works, mains electrical supply, permits and the base plates must be supplied by Customer. Major components The Compact Tower is composed with following main units: - tower to store the stack of sheet - elevator to move the pallet on which the stack of sheet is laid - table with fixed pins where the operator load the stack of sheet - gripper with suction cups - light barriers - electric cabinet with control panel - set of safety fences General features: Sheet format max. 3.100×1.570mm Max weight 3.000Kg per stack Max height stack Gedpfszlic Nsx Ahaeuf

Condition: new, Year of construction: 2026, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 100 t, stroke length: 200 mm, operating speed: 140 mm/s, reverse speed: 130 mm/s, table width: 60 mm, table length: 3,200 mm, table height: 850 mm, throat depth: 500 mm, ram plate width: 50 mm, ram plate length: 3,200 mm, distance table to ram: 460 mm, clearance between the columns: 2,700 mm, retraction force: 10 t, oil tank capacity: 230 l, total length: 3,800 mm, total width: 1,800 mm, total height: 2,750 mm, overall weight: 7,300 kg, Equipment: CE marking, documentation/manual, safety light barrier, This machine tool is designed and manufactured with the latest technology, ensuring its strength, rigidity and safety performance. It adopts an integral high-quality steel plate welded structure with a heavy-duty and high-rigidity frame. The machine surface is coated with imported anti-rust primer and topcoat, keeping the equipment in good condition permanently. The machine tool is mainly composed of the frame, upper slide, backgauge system, slide block and synchronous control device, dies, hydraulic system, control system and other components. Product detail display Frame Section It adopts a frame-type structure, consisting of worktable vertical plates, left and right side plates, and connecting beams. It is integrally welded with steel plates, featuring high rigidity, high strength and excellent resistance to torsional deformation. Internal stress is eliminated through processes such as surface shot blasting, ensuring long-term stability of the overall machine precision. During bending, the deformation of the upper slide and worktable is minimal, which guarantees excellent straightness and angular consistency of workpieces. Die and Clamping Device It is composed of upper and lower dies, featuring high precision, premium quality and long service life. The upper die is mounted on the slide block, securely fixed by a precision quick-release clamping device. The lower die adopts a dual-V concentric design, allowing for fast and convenient die changeover, effectively reducing operator labor intensity, and significantly improving overall production efficiency.device. The lower die adopts dual V concentric design, enabling fast and convenient die change, reducing intensity and improving efficiency. Throat Opening Deflection Compensation Device Godpfx Ahjy Uc Nkoaeuf A linear encoder is installed on each side of the machine to measure and feed back the precise distance between the slide block and the lower worktable. The encoders are connected to the worktable via C-frames, effectively eliminating the influence of frame throat deformation on the slide block position. Position data is fed back to the CNC system, which outputs signals to control the hydraulic proportional servo valves, ensuring accurate synchronization of the two cylinders. Backgauge System Adopts the latest Belgian-designed backgauge for exceptional precision and stability. Driven by servo motors and ball screws, it delivers high speed and outstanding positioning accuracy. The unique dual linear guide rail structure ensures excellent long-term repeatability. Multi-stage positioning expands the working range, offering superior value for investment. Modular design allows axis configuration from single-axis X to multi-axis options. Mechanical Compensation Device Adopts an integrated mechanical compensation wedge block, motor-driven for precise adjustment. It automatically fine-tunes the worktable alignment, offsetting deflection caused by bending forces. The system ensures consistent precision along the entire length of the workpiece. It provides reliable, repeatable adjustment, eliminating the need for manual correction, and significantly improving bending accuracy.

Condition: repair required (used), functionality: unexamined, Year of construction: 1990, overall weight: 92,000 kg, load capacity: 20,000 kg, working height: 8,500 mm, Equipment: documentation/manual, Two rail-mounted electric container gantry cranes are offered for sale from an industrial site in Riga, Latvia. The cranes were designed for loading, unloading, transferring and stacking ISO 1C and 1CC containers. Their 20,000 kg rated lifting capacity, 25 m span and powered travelling trolley make them suitable for container terminals, railway yards, ports, logistics hubs and industrial storage areas. The cranes were manufactured in 1990 by KRAN / Uzlovsky Machine-Building Plant in the Tula region. The factory type designation is 20-25-8.5-5. Two units are available. Guodpfszmtciox Ahajf EQUIPMENT AND DOCUMENTATION Rail-mounted gantry structure with electrically driven crane travel mechanism. Powered travelling trolley and main hoisting mechanism. Operator cabin control. The factory passport specifies a rotating 20 t container spreader for ISO 1C and 1CC containers; A technical passport for factory no. 029 is available in Latvian and Russian, including historical inspection and repair entries. Further technical information and detailed photographs can be provided on request.

Condition: used, Elektrischer Eckenrunder / Electric Corner Rounder Pescha Round Corner Machine Gusdpfx Asyzi Iajhaef Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: like new (used), For sale is a used Record Power bandsaw, model SABRE 450, with a cutting width of 400 mm. The saw is in like-new condition and has been refurbished and inspected by our qualified technicians. (Fully functional) Technical specifications: - Cutting height: 320 mm - Cutting width: 400 mm - Table size: 658 x 400 mm - Saw blade length: 3886 mm - Cast iron wheels, diameter: 450 mm - Motor power: 1.5 kW / 2 hp - 400 V - Like-new condition Gedpozi A Erofx Ahaeuf The bandsaw is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Bandsaw, saws, saw, band Reference: R-ZC9SJ

Condition: excellent (used), With acid-resistant section, with high pressure nozzles, equipped with a conveyor Overall Size: 9,5 x 1,15 x 1,9 m Opening size: 530 x 250 mm Chemical tank (heated): 0,5m³ Rinse tank (heated): 0,3 m³ Drying fans: 12db Voltage: 380 V Guodpet Ity Djfx Ahaof

Condition: used, Year of construction: 2017, Used 2014 XYZ SMX 5000 CNC / Manual Bed Milling Machine. Supplied with ProtoTRAK SMX Control, Electronic Handwheels, TRAKing & DXF File Reader, Power Drawbar, Fully Programmable Spindle Drive and Custom-Made Splash Guards. SPECIFICATION: TRAVELS: X Axis: 1,524 mm Y Axis: 596 mm Z Axis: 540 mm Maximum Daylight Under Spindle: 610 mm Quill Travel: 140 mm TABLE: Length: 1,930 mm Width: 356 mm T-Slot Width: 15.9 mm Godpfx Aozgwq Djhaeuf Maximum Table Load: 850 kg SPINDLE: Motor Power: 5.75 kW (7.5 HP) Speed Range: 40 - 5,000 rpm Taper: ISO 40 Quill Diameter: 116 mm Programmable Spindle Drive HEAD: Head Tilt Left: 45° Head Tilt Right: 45° CONTROL: ProtoTRAK SMX Conversational CNC Control Electronic Handwheels TRAKing Function EQUIPMENT: Power Drawbar Splash Guards GENERAL: Machine Weight: 3,100 kg

Condition: used, Year of construction: 1981, cutting diameter 320 mm saw band length 4670 mm cutting width 580 mm total power requirement 7,4 kW weight of the machine ca. 3 t Sawing range, circular, max. 100 - 320 mm vertical, max. 100/100 x 320/460 mm Length of cut, min./max. 0 - 580 mm Distance from column to saw band, max. 690 mm Cutting speed, infinitely variable 16 - 160 m/min Dimensions of saw band, length x Ø approx. 4,670 x 38 mm Length of remaining pieces, automatic/single cut 100/10 mm Saw blade drive, approx. 4.4 kW Total electrical load, approx. 7.4 kW - 380 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features: * Infinitely variable speeds of saw blade motor via servo motor and STOEBER drive. Display of cutting speed on control panel. * Infinitely variable settings of sawing feed with display of the current cutting speed. * Workpiece counter: Number of workpieces can be preset. Selection switch for single cuts / multiple cuts. * Display for band tension and cutting feed. * Automatic motor-driven material feed, controlled by a positioning processor, Model PP 160, with input of the appropriate lengths using a roll conveyor approx. 1,500 mm, with enlargement approx. 2,000 mm. And with a stable roll conveyor for the exterior area, 3,500 mm. * Built-in chip conveyor with coolant device. * Built-on switch cabinet. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Godpfxjt Hwrns Ahaeuf Thank you for your interest. We have a selection of saws on stock. Please let us know your requirements.

Condition: used, Year of construction: 2005, total height: 1,340 mm, total width: 4,160 mm, power: 16 kW (21.75 HP), cutting width (max.): 1,060 mm, table height: 1,060 mm, We offer this used KASTO BBS U 10 serie 102 band saw, year of manufacture 2005. Manufacturer: KASTO Model: BBS U 10 serie 102 Construction Year: 2005 Condition: used Category ID: 1638 Type ID: 1756 Type: band saw Blade tension: • Blade width 54 mm: 55 bar • Blade width 67 mm: 60 bar Overall machine dimensions: (All dimensions related to the cutting length are shown on the following page) • Width (with protective cover open), approx.: 5,255 mm • Width (with protective cover closed), approx.: 4,160 mm • Height (with laser device), approx.: 1,340 mm • Height of loading magazine: 1,060 mm Power requirements: • Total drive power, approx.: 16.0 kW • Saw drive motor power, approx.: 7.5 kW Cutting capacity: • Minimum cutting width: 10 mm • Maximum cutting width: o with measuring stop: 900 mm o without measuring stop: 1,060 mm Blade speed: Frequency-controlled • Standard: 9–90 m/min • Option: 16–160 m/min Cutting feed: Frequency-controlled • 0.5–250 mm/min Blade dimensions: • 7772 × 54 × 1.6 mm or • 7772 × 67 × 1.6 mm Kerf width: • 2.4 mm Blade guides: • Three-roller guides, replaceable and adjustable Blade back guide: • Carbide wheel, replaceable Blade cleaning: • Easily replaceable motor-driven brush with plastic bristles Coolant system: • Flow through two nozzles Pump capacity, approx.: • 100 l/min If you have any questions or need more information, feel free to send us a message or give us a call. Gjdpjznza Esfx Ahajuf

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 11876, travel distance X-axis: 1,524 mm, travel distance Y-axis: 596 mm, travel distance Z-axis: 584 mm, quill travel distance: 127 mm, quill diameter: 105 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 40 rpm, table width: 355 mm, overall weight: 3,750 kg, table load: 850 kg, XYZ SMX 5000 CNC Bed Type Milling Machine Gujdpfx Aoznkkajhajf Model: SMX 5000 S/No.: 11876 Year: 2013 Control: ProtoTrak SMX Table Size: 1930 x 355mm Travels (X,Y,Z axis): 1524 x 596 x 584 Quill Diameter: 105mm Max. Quill Travel: 127mm Spindle Taper: 40 ISO Spindle Speed Range: 40 – 5000 RPM Spindle Motor Power: 7.5 HP Max. workpiece weight: 850 kgs

Condition: ready for operation (used), functionality: fully functional, fuel type: diesel, power: 80 kW (108.77 HP), total length: 2,900 mm, total width: 1,150 mm, total height: 1,600 mm, No minimum price – guaranteed sale to the highest bidder! Gujdpszi D Rijfx Ahajf TECHNICAL DETAILS Rated power: 100 kVA Continuous power: 80 kW Maximum speed: 1,500 rpm Noise level: < 68 dB Engine manufacturer: Yunnei MACHINE DETAILS Controller: Deep Sea DSE7320 Cooling type: Water Fuel: Diesel Battery voltage: 24 V Output voltage: 230 / 400 V Output current: 144 A Output frequency: 50 Hz Type of output current: AC / Three-phase Dimensions & Weight Dimensions (L x W x H): 2,900 x 1,150 x 1,600 mm Net weight: 1,550 kg EQUIPMENT AVR ATS Remote control Water and oil heater Fuses Euro/CEE/Powerlock sockets Cover The operating hours can be found in the last image.