Used Khs New Bottle Skimming Machine for sale (77,013)

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 710 x 450 x 510mm, Table size 760mm x 430mm, Kjdpsz R Rbdsfx Aniedu table load 500 kgs, spindle speed 8000rpm, spindle motor power 20Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Spindle taper BT40, 24 station ATC.

Condition: new, mileage: 10 km, power: 374 kW (508.50 HP), fuel type: diesel, tire condition: 100 %, axle configuration: 8x2, wheelbase: 7,370 mm, fuel: diesel, color: silver, emission class: euro6, suspension: air, number of seats: 2, total length: 11,770 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 11,500 kg, loading space length: 9,250 mm, loading space width: 2,550 mm, Equipment: ABS, air conditioning, parking heater, seat heater, trailer coupling, General information Number of doors: 2 Year of construction: 2026 Registration number: BD-624-S Technical information Number of cylinders: 6 Ksdpfozw Unuox Aniodu Engine capacity: 12.777 cc Drivetrain Make of engine: Volvo Axle configuration Tyre profile: 100% Suspension: air suspension Front axle 1: Alloy wheels; Max. axle load: 9000 kg Front axle 2: Alloy wheels; Max. axle load: 9000 kg; Steering Rear axle 1: Double wheels; Alloy wheels; Max. axle load: 11500 kg Rear axle 2: Lift axle; Max. axle load: 7500 kg; Steering Weights Empty weight: 15.191 kg Carrying capacity: 21.909 kg GVW: 37.000 kg Max. towing weight: 50.000 kg Functional Make of bodywork: LEMA Truckbuilders Height of cargo floor: 105 cm Extendable superstructure: Yes Condition General condition: very good Technical condition: very good Visual appearance: very good Damages: none = Additional options and accessories = - Beacon(s) - Gullet - I shift - Radio - Radio remote control - Steering Axle - Toolbox - Work lamp(s) = Remarks = Superstructure Construction year: 2026 New Volvo FH500 8x2 machine transport, Ramp body built by Lema truckbuilders, high-quality finish including 3 storage boxes on both sides, remote-controlled hydraulic ramps, Loading floor length 925 cm, heavy-duty slatted floor in ramps

Condition: excellent (used), Year of construction: 2023, 400mm swing, Ksdpfx Asz Srv Deniedu 220mm max diameter, 490mm between Centres, Siemens 828 Control, 65mm bar capacity, 12 station VDI30 turret, 17kW Spindle Motor, Spindle Speed 4000rpm, 0.001 degree C axis, +/- 35mm Y axis, low volt light, coolant, Tool setter, Tailstock, swarf conveyor

Condition: used, Year of construction: 2006, operating hours: 10,010 h, Equipment: all wheel drive, MAKE: NEW HOLLAND KOBELCO Kdjdpfeyzliyjx Aniou TYPE: E135SR-1E YEAR: 2006 CE: YES WORKING HOURS: 10,010 HOURS TYRES/UNDERCARRIAGE: 60% POWER: 63 KW ENGINE: ISUZU BB-4BG WEIGHT: 14,100 KG OPTIONS: 14,100 KG MACHINE HYDRAULIC QUICK COUPLER CLIMATE CONTROL FULL PIPING (HAMMER LINES) SORTING FUNCTION TRACKS 60% GOOD GOOD CONDITION Price is Ex VAT.

Condition: like new (used), Year of construction: 2009, functionality: fully functional, This automatic wrapping machine is specially designed for use with dry ice slices and/or blocks. All parts in contact with the product are made of stainless steel. Automatic pitch adjustment on the conveyor, and all motors are torque-controlled. The welding temperature is displayed and electronically controlled. The control panel consists of various instruments and visual alarms and is equipped with a self-diagnostic device. TECHNICAL DATA Working speed: Up to 25 wraps per minute, 25 meters of film per minute. Product size: Max wrap width: 250mm, Max wrap height: 60mm, Wrap length: 40 to 260mm, 140 to 580mm and 200 to 800mm. Compressed air: 4 to 5 bars Version: standard version is right-hand Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, die cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice Kdsdpfx Aezxggloniju

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, controller model: Siemens HMI Simatic PC FI 15, product height (max.): 150 mm, product length (max.): 100 mm, product width (max.): 85 mm, Fully automatic and continuous high-performance cartoner for packaging bottles, vials, or similar objects, with simultaneous leaflet insertion into folding cartons featuring same-side tuck-in flaps. Kjdpfoxt Hausx Aniodu The system consists of the following components: - Product bucket conveyor - Folding carton conveyor - Folding carton magazine - Leaflet folding unit TECHNICAL DETAILS Maximum output: 250 folding cartons per minute Format range, min.: 25 x 15 x 65 mm Format range, max.: 100 x 85 x 150 mm MACHINE DETAILS Control system: Siemens HMI Simatic PC FI 15 EQUIPMENT - GUK 21/4 leaflet folding and feeding unit (4-fold folding possible) - Nordson 3400 V hot melt glue unit - Two plastic hinged plate belts (product bucket conveyor) - Color imprint coding at the coding station

Condition: used, Year of construction: 2021, machine/vehicle number: DW2110130101, functionality: fully functional, power: 32 kW (43.51 HP), input voltage: 380 V, input current: 85 A, type of input current: three-phase, workpiece length (max.): 3,000 mm, workpiece width (max.): 2,000 mm, workpiece height (max.): 30 mm, number of axes: 4, number of slots in tool magazine: 10, total height: 2,400 mm, total length: 4,300 mm, total width: 2,250 mm, overall weight: 2,000 kg, table length: 3,000 mm, table width: 2,000 mm, year of last overhaul: 2025, Equipment: CE marking, We offer this used Apollo 4AX 2030 CNC Router, year of manufacture 2021. Manufacturer: Apollo Model: 4AX 2030 Year of manufacture: 2021 Condition: used Machine type: CNC Router Ksdpfx Anjz Iz Imoiedu If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, New, never used pellet making machine for sale! It can be ordered with a 6 mm or 8 mm sticker (1 piece optionally comes with the machine). Pellet production capacity up to 400-450 kg/hour depending on the raw material. Pellet diameter:3mm, 4mm, 5mm, 6 mm or 8 mm (depending on the chosen sticker). 3mm, 4mm, 5mm, 6mm sticker with roller as a set for the machine for 2000 euros. Sticker diameter: 300 mm. Kodpoxmhx Ejfx Anijdu Adjustable pellet length: 10-30 mm. Engine power: 22 kW. Dimensions: 1400 mm x 600 mm x 1100 mm. Weight: 750 kg. Raw material moisture: 10-12-14%. The moisture content affects the quality of the pellets. Dph3O7 Raw material size: Saw dust: 1-3 mm, straw: 3-6 mm. The density of the granules is no more than 1250/m3. It is located locally in Budapest (EU), Hungary.

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 7,600 kg, permissible axle load (axle 2): 7,600 kg, first registration: 05/2023, total length: 13,970 mm, total width: 2,550 mm, suspension: air, tire size: 205 / 65 / R17.5, wheelbase: 8,740 mm, color: grey, Axle configuration Tyre size: 205 / 65 / R17.5 Make axles: Stefen Brakes: drum brakes Suspension: air suspension Rear axle 1: Double wheels; Max. axle load: 7600 kg; Tyre profile left inner: 70%; Tyre profile left outer: 70%; Tyre profile right outer: 70%; Tyre profile right outer: 70% Rear axle 2: Double wheels; Max. axle load: 7600 kg; Tyre profile left inner: 70%; Tyre profile left outer: 70%; Tyre profile right outer: 70%; Tyre profile right outer: 70% Weights Ksdpfx Anjz R Nz Aoisdu Empty weight: 6.680 kg Carrying capacity: 20.520 kg GVW: 27.200 kg Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: MZRLM01, overall weight: 500 kg, total length: 1,750 mm, total width: 800 mm, total height: 1,450 mm, space requirement length: 2,000 mm, space requirement width: 1,000 mm, space requirement height: 2,000 mm, power: 1.2 kW (1.63 HP), fuel type: electric, Equipment: CE marking, The Automatic Labeling Machine is a sophisticated piece of equipment used in various industries for applying labels to products, containers, packages, or other items. These machines are designed to enhance productivity, accuracy, and efficiency in the labeling process. Kjdpoxum H Defx Aniodu

Condition: used, Year of construction: 2004, Overview  This cold glue labelling machine was manufactured in 2004 by German company KHS. The machine was running until January 2025 and is now stored in the company. The labeller has a camera system for the orientation of the labels in the neck area for swing-top glass bottles. Technical data  - Capacity: Up to 26,000 bottles per hour - Working direction: anticlockwise - Formats: - 330 ml Longneck glass bottles - 330 ml Steinie glass bottles - 330 ml Swing-top glass bottles - 500 ml NRW glass bottles Kdodpswhwwvsfx Anisu - Label positions: - Front (up to 2 labels) - Back (up to 1 label) - With a Siemens S7 control - New HMI touch panel in 2019

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1020 x 610 x 620mm, Table size 1200mm x 600mm, spindle speed 12000rpm, spindle motor power 14.7kW, Siemens 840DSL control with Shopmill, 43M/min rapids, Spindle taper BT40, 30 station ATC, through spindle coolant, swarf conveyor. Kdsdpfx Ansz Eh Nlsiou

Condition: used, Year of construction: 1992, Overview Kedpfx Anozlqu Teisdu This complete automatic can filling line has a nominal output of approx. 20,000 cans/hour for 330 ml cans (can type 211/202), packed 24 cans per foil-shrunk tray. The core is an O+H / KHS Hansacan filler with 30 filling valves, mechanically blocked to a Ferrum F 505 G seamer with 5 seaming heads. Empty cans are supplied by a TMG Impianti Vega 120/B depalletizer and rinsed on a Hysek Rinsstar 20000 rinser before filling. A date/coding printer is not included. Technical data - Line type: Complete automatic can filling line - Nominal output: approx. 20,000 cans/hour (330 ml), product- and temperature-dependent - Container: 330 ml can, can type 211/202; 24 cans per foil-shrunk tray - Controls: PLC Siemens S7, Siemens SIMATIC HMI - Warmer and drying station reconditioned; fill-height control and packaging machine new Equipment - Can Depalletizer | TMG Impianti | Vega 120/B | tier-sheet removal, can table, pallet magazine | 2014 - Can Rinser | Hysek | Rinsstar 20000 | filtered-water rinse | 2001 - Can Filler | O+H / KHS | Hansacan | 30 filling valves, fixed for can type 211/202, will be general overhauled | 1992 - Can Seamer | Ferrum | F 505 G | 5 seaming heads, blocked with the filler | 2010 - Can Warmer | SMB | stainless-steel tunnel | warms cans to approx. 25 °C before packaging | reconditioned - Fill-Height Control | Heuft | incl. pushing/reject station | new - Can Drying Station | Gesete | air-dries cans before coding | reconditioned - Packaging Machine | Termo Pack | UMT-1500 | tray erector, packer and foil shrink | new - 2x can turning stations (330 ml can) - Can conveyor system incl. electrical control panel (PLC Siemens S7) - Tray conveyor system incl. drive station Condition Used line delivered in reconditioned or new condition. The filler and Ferrum seamer are reconditioned and blocked as one unit with a new electrical panel (PLC Siemens S7), new pneumatic panel and renewed pneumatic valves; the can warmer and can drying station are reconditioned; the fill-height control and packaging machine are supplied new. This work is carried out as part of the order, so the line is supplied component by component and is not yet assembled or tested as one running unit. The can depalletizer is the exception - it is already fully reconditioned and in stock. Filler and seamer are delivered with CE declaration and full documentation. Components can be inspected on request. Availability On request; delivery time as per agreement. Reconditioned and new-build components are supplied with a lead time after order. Location and inspection on request.

Year of construction: 1992, condition: ready for operation (used), A two-component mixing/carbonation system by KHS for the production of still and/or carbonated beverages is available. Throughput capacity: approx. 12000l-25000l/h, tank volume degassing/buffer: 2m³/2m³, mixing accuracy: +/-0.05°Brix, CO2 dosing accuracy: +/-0.1g/l, CIP cycle rinsing time: 20min. Machine dimensions X/Y/Z: approx. 3000mm/2200mm/2400mm, weight: approx. 3000kg. Documentation available. On-site inspection is possible. Kdedpfoxqgxxsx Aniou

Condition: used, Year of construction: 1992, Overview This O+H / KHS Hansacan can filler, blocked with a Ferrum can seamer, is a rotary can filling and seaming monoblock for beverage cans. Filler and seamer are joined as a single unit, so cans run from filling straight through to seaming in one continuous flow. The block is set up for standard 330 ml cans (can type 211 / 202) and reaches a rated output of approximately 20,000 cans per hour, depending on product and filling temperature. The block was previously in production in a commercial brewery filling 330 ml cans and is currently at the workshop undergoing a complete reconditioning before delivery. Filling parameters and production data are managed via a Siemens SIMATIC touch HMI, with machine control on a Siemens S7 PLC. Technical data - Manufacturer: O+H / KHS Kodpjzlqu Hofx Aniodu - Model: Hansacan can filler - Seamer: Ferrum can seamer, F 505 G - Year of manufacture: filler 1992, seamer 2010 - Machine type: rotary can filler and seamer monoblock - Filling valves: approx. 30 (type Hansacan) - Seaming heads: 5 - Capacity: approx. 20,000 cph at 0.33 L (product- and temperature-dependent) - Can format: 330 ml standard cans, can type 211 / 202 - Products: beer, carbonated beverages - Control: Siemens S7 PLC with Siemens SIMATIC touch HMI Equipment - Filler and seamer supplied as one blocked unit - New electrical panel with Siemens S7 PLC and SIMATIC touch HMI (reconditioning scope) - New pneumatic panel with renewed pneumatic valves (reconditioning scope) - Beer regulating valve ahead of the beer inlet, CIP tulips and CO₂ injection before seaming - Set up for can type 211 / 202, 330 ml - Manuals, spare-part list and electrical documentation for filler and seamer (provided with the machine) - CE declaration to be issued on completion of reconditioning Condition Used - currently undergoing a complete reconditioning at the workshop and to be delivered fully overhauled, supplied as a blocked filler and seamer unit. The reconditioning scope and the CE declaration are committed as part of the sale and are not yet complete. The block was previously in production in a commercial brewery filling 330 ml cans. Availability On request, after completion of the reconditioning. Location and firm delivery date on request.

Condition: used, Year of construction: 1996, Overview This KHS Innopas P II SG 30-200 is a tunnel pasteurizer for bottled beverages in glass bottles, built in 1996 by KHS (Klöckner Holstein Seitz, Germany). With a treatment area of 113.5 m² across 8 treatment zones (3 of them recuperative), it pasteurizes at approx. 24,000 - 25,000 bottles per hour depending on bottle format, at a maximum pasteurization temperature of 75 °C. For 0.7 l glass bottles the total treatment time is approx. 48.6 minutes (21.2 min heating, 12.3 min pasteurization, 15.0 min cooling) at approx. 5 pasteurization units. Kdedpfjzwxu Ssx Anieu The main control is a Siemens SIMATIC S5 PLC; the pasteurization unit setting (temperature diagram) was later upgraded to a Siemens S7 with touch panel. Danfoss frequency drives are fitted. The machine ran at a German mineral water bottling plant until mid-2024 and is now completely dismantled and professionally stored, with the conveyor belt sections and components palletized - ready for immediate collection. Technical data - Manufacturer: KHS (Klöckner Holstein Seitz) - Model: Innopas P II SG 30-200 - Year of manufacture: 1996 - Machine type: tunnel pasteurizer - Capacity: approx. 24,000 - 25,000 bottles/hour (depending on bottle format) - Treatment area: 113.5 m² - Treatment zones: 8 (H1-H3, S, P, C1-C3 plus cooling tower zone), 3 recuperative - Max. pasteurization temperature: 75.0 °C (0.7 l) / 72.5 °C (0.33 l) - Inlet temperature: 15.0 °C; outlet temperature: approx. 32 - 38 °C depending on format - Total treatment time: approx. 48.6 min (0.7 l) / 77.1 min (0.33 l) - Pasteurization units: approx. 5 PE - Machine water content: approx. 14.4 m³ - Water consumption at nominal capacity: approx. 1.5 m³/h - Heat consumption at nominal capacity (0.7 l): approx. 3,672 MJ/h - Installed power: approx. 66.2 kW - Electrical connection: 400 V, 50 Hz - Dimensions (L x W x H): approx. 21,000 x 4,210 x 2,750 mm - Required entry opening: approx. 2.7 x 3.0 m - Net weight: approx. 27,500 kg - Noise level: ≤ 85 dB(A) according to ISO 3744 Equipment - Siemens SIMATIC S5 PLC (main control) - Pasteurization unit setting (temperature diagram) upgraded to Siemens S7 with touch panel - Danfoss frequency drives - Modular plastic conveyor belt with drainage openings, belt sections palletized - External pump assemblies and inspection windows - Electrical cabinets with main disconnect switch - Original KHS documentation (datasheets and drawings) Condition Used. The machine is completely dismantled and stored; belt sections, piping and components are palletized for transport. The machine can be visited on request. Availability Immediately. Location: Germany. Loading by the seller is possible.

Condition: new, Year of construction: 2025, Standing seam metal roof machine F3 with length measuring device was designed by our company to produce standing seam roofing panels for the installation of roofs and facades of various buildings and structures. Sheet metal blanks are passed through the forming rolls of the machine to get the desired shape of the standing seam panel. This method of production allows you to produce panels with a speed of about 10 meters per minute and fit any roofing companies. Bfywfrix The machine is equipped with an easy width adjustment system, so it takes just a few minutes to readjust it from rolling one width to another. The F3 machine can work with panels from 200 to 700 mm wide. It is possible to work with metal sheets and coils made of galvanized steel, copper, zinc, aluminum, stainless steel, etc. Maximum metal thickness for work – 0.8 mm. Standing seam metal roof machine F3 can go in a standard set, and with additional accessories providing additional functionality of the machine and simplifying the work process. As additional options, we offer a floor decoiler, which can be used directly on the working site thanks to its lightweight and small size, so you can put the coil to the decoiler and feed it to the machine. As an optional extra, you can purchase a length-measuring device to roll roofing panels the same length and in semi-automatic mode, without marking them with tape and ruler. Using those accessories, you can really save your time and make your work more accurate. With the length measuring device, our customers very often buy a cross cutting knife in order to cut the panels of the desired length from the coil. As extra options, we also offer ribbed panels rolls to form standing seam panels with ribs and providing additional roofing system rigidity. You can use the machine with or without rolls. Extra rolls for radius panels production allow you to produce panels with a big bending radius, which allows you to use them for various structures, such as hangars, etc. We have a ready-made solution for your business for hangars roofing buildings production. For protection against various damages, we offer the use of a top cover, which prevents foreign objects from getting inside the machine and makes the working process of the machine safer - roll forming roof panel machine F3 with top cover For closing the standing seam lock our customers can use special standing seam roofing tools Kdjdpoh Aw Rnofx Aniou While installing roof panels, roofers use special fixation elements – sliding clips, so we offer punching presses for their production - sliding clip formers Thus, using a standing seam metal roof machine F3, our customers and partners can produce efficient standing seam roofing panels, and with additional accessories can make this process more convenient and faster.

Condition: used, Year of construction: 2013, Overview This KHS Innopro KZE 72 is a flash pasteurizer (short-time heating system) for beer, cider and other carbonated beverages, built in 2013 by KHS GmbH (Dortmund, Germany). Working with a plate heat exchanger, it gently pasteurizes at a nominal capacity of 72 hl/h and is designed for a product flow between 24 and 72 hl/h with a maximum CO₂ content of 6.5 g/l. The system comes complete with its 50.8 hl buffer tank and the control cabinet with touchscreen HMI. The unit comes out of a large brewery, is still installed and can be visited on request. Technical data - Manufacturer: KHS GmbH (Dortmund, Germany) - Model: Innopro KZE 72/T4-72-12/PT45A - Year of manufacture: 2013 - Machine type: flash pasteurizer with plate heat exchanger - Nominal capacity: 72 hl/h - Minimum adjustable capacity: 24 hl/h - Capacity during CIP cleaning: 85 hl/h - Maximum CO₂ content in the product: 6.5 g/l - Pasteurization temperature: 72 °C (beer) / 85 °C (cider) - Holding time: 30 s - Product inlet temperature: 4 °C; product outlet temperature: max. 4 °C - Supply pressures: product 3.5 bar(g), steam 3 - 6 bar(g), coolant 1.5 - 2 bar(g), CIP 4 bar(g) - Electrical connection: 400 V, 50 Hz, 3-phase - Dimensions pasteurizer skid: approx. 4,600 x 3,500 x H 2,900 mm - Weight pasteurizer skid: approx. 3,100 kg (frame incl. plate heat exchanger) Equipment - Pasteurizer skid with plate heat exchanger type PT45A, pumps and valve manifold - Buffer tank: 50.8 hl gross / 45.5 hl working volume, inner Ø 1,600 mm, H 3,420 mm, approx. 1,120 kg, operating pressure up to 5 bar(g), CO₂ and sterile air connections 6 - 8 bar(g) - Control cabinet with touchscreen HMI - OEM technical documentation (operating manual) Condition Used - good working condition. The system was in production in a large brewery until recently, is still installed and can be inspected. Availability Kdjdpfx Aozvfbcjnisu Immediately. Location: Netherlands. Dismantling and loading by arrangement.

Condition: used, Year of construction: 2012, operating hours: 4,000 h, Equipment: all wheel drive, Mini excavator New Holland E 50 B SR. * Operating weight: 4,945 kg * Air conditioning Kdedpfeup R Uusx Aniju * Year of manufacture: 2012 * Hours: 4,000 * Machine is in very good condition * Immediately ready for use

Condition: used, Year of construction: 2002, Overview  This isobaric beer filler was manufactured in 2002 by German company KHS. The machine is configured for 500 ml glass bottles with crown cork and achieves a capacity of 44,000 bottles per hour. It was used for filling beer at 10–12 °C. The machine will be available from November 2025 and remains installed until then. A site inspection can be arranged upon request. Technical data  - Capacity: 44,000 bph (500 ml glass bottles) - Formats: 500 ml glass bottles - Filling principle: Isobaric (mechanical filling system) - Number of filling stations: 144 - Crowner: 24 stations (crown cork) - Operating voltage: 400 V - Frequency: 50 Hz - Control system: Siemens S7-400 - Control cabinet: Air-conditioned, stainless steel - Operating hours: approx. 30,000 (as of Nov. 2024) - Direction: Left to right Scope of Delivery - Filler: KHS Innofill DMG SVF 144-KK24 - Crown corker with 24 stations - Control cabinet and operator panel - Bottle clamping star wheels - CIP cups Kdjdewif Dgepfx Anisu - High-pressure injection (HDE) - Bottle shower at discharge - Bottle table in roof optic - Central lubrication system - VPN remote access capability - Safety housing (updated in 2016, with flushing system) - Touch panel - Cork feeding unit by NSM - Filling level inspection system: Krones Checkmat (2015)

Condition: new, Year of construction: 2025, Fully automatic capping machine for screwing screw caps onto containers including conveyor belt for integration into the packing line. The machine is suitable for a multitude of different screw caps by means of the quick-change of screwing device head. Prior to tightening, an adjustment device provides for an exact positioning of the screw cap onto the container. Main components: PLC by Mitsubishi, sensor by Stick, pneumatic parts by AIRTAC. - Specifications: max. speed of the machine in neutral: 25 cycles/minute; conveyor belt speed : 0-13m/min; cap diameter: customized; power: 220V, 3.5kW; compressed air: 3-5bar, 0.1m³; materials used: predominantly stainless steel 304, protective panel and conveyor parts are made of plastic; machine dimensions and weight: L1450xW850xH1600mm, 350kg; Conveyor belt dimensions: Length approx. 2200mm (may be adapted), width approx. 110mm (customized). That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Kjdpfx Ajv Nk Ulsnijdu

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,750 mm, spindle bore: 104 mm, spindle speed (max.): 1,800 rpm, type of input current: three-phase, Model:Prototurn 555 Swing Over Bed:560mm Distance Between Centres:1750mm Control: Prototrak SLX Spindle Speeds: To 1800 RPM Spindle Bore:104mm Kdjdpfxozrnkre Anisu With: 300mm 3 Jaw Chuck Fixed Roller Steady Quick Change Toolpost Toolpost Holders Dimensions: 3940 x 2250 x 1910mm high Weight: 4100 Kgs

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Shenzhen ICM Technology Development Co., Ltd., controller model: 880W02, pipe diameter (max.): 38 mm, pipe length (max.): 3 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 190 °, bending radius (max.): 200 mm, bending radius (min.): 2 mm, mandrel length: 150 mm, number of axes: 2, table length: 3 mm, overall weight: 1,300 kg, total length: 3,900 mm, total width: 900 mm, total height: 1,400 mm, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, oil tank capacity: 80 l, number of digital displays: 1, warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, quick-change device, Full Automatic Pipe Bending Machine DW38CNC-2A-1S Equipped with a touchscreen and CNC control system; capable of storing up to 500 sets of parameter groups. Features a rebound compensation setting program, with built-in confidentiality protection for programs and processing data. Servo control is adopted for corner bending, pipe bending and material feeding functions. The operating system is protected by passwords and physical keys, and supports production quantity & runtime records for efficient production management. Comes with slow bending and slow core pulling functions. Fault messages are displayed on the screen to help operators troubleshoot problems promptly. Touchscreen This pipe bender is equipped with a Weinview industrial touchscreen for its operation interface, which delivers an intuitive operation experience and allows new operators to get started quickly. You can directly edit the pipe bending process parameters on the interface, such as feeding distance, rotation angle and bending angle, and separately set the running speed for each step. During operation, the interface displays real-time axis positions, bending progress and production cycle, and automatically counts total output and shift output to help you manage production efficiency effectively. It also supports manual single-step debugging, automatic continuous operation, program editing and equipment parameter setting. Different modes can be switched with one click, making it convenient for machine trial runs and mass production alike. Kdedpfx Ajy Uuw Tjnieu Hydraulic solenoid valve manifold This integrated hydraulic solenoid valve manifold serves as the control center of the CNC pipe bender's hydraulic system. Adopting industrial-grade modular design, it integrates multiple solenoid valves to independently control the movements of the feeding axis, rotating axis, bending axis, as well as clamping, auxiliary pushing and other auxiliary mechanisms. Linked with the CNC system, it converts control commands into precise hydraulic power output, enabling smooth operation throughout pipe feeding, rotation and forming. Matched with high-pressure sealed hydraulic hoses, it maintains zero leakage and high stability under full-load operating conditions, delivering reliable performance for long-term mass production. Servo drive These four units are Mitsubishi servo drives equipped on our pipe bender, acting as the power core that governs key movements including material feeding, pipe rotation and pipe bending. Adopting Mitsubishi MR-JE series industrial-grade high-end servo drives, they feature high positioning accuracy and fast response. Both feeding distance and rotating angle can be controlled precisely with no deviation. With excellent stability, they rarely lose steps or malfunction during long-hour continuous operation. This ensures consistent bending precision for every pipe and a high finished product yield.

Condition: used, Year of construction: 2018, Overview This compact automated can filling line was manufactured with main equipment from KHS, Ferrum, Ska Fabricating and Atlanta. The line is designed for beverage can production and includes depalletizing, can transport, ionized air rinsing, filling, seaming and downstream film / shrink packaging. The core of the line consists of a KHS Innofill Can C filling system combined with a Ferrum FC03 can seamer. The system is integrated with overhead and floor-mounted can conveyors and is arranged in a compact production layout. Technical Data - Manufacturer / main equipment: KHS / Ferrum / Ska Fabricating / Atlanta - Line type: Automated can filling line - capacity: 15.000/h - Number of filling valves: 21 - Number of seaming heads: 3 - Container type: 330ml, 440ml, 500ml standard can - Packaging type: loose cans into 12 & 24 trays and WA boxes - Year: 2018 - Operating hours: 3,446 h - Layout: compact canning line layout with overhead and floor-mounted conveyor sections Scope of Delivery - Can Depalletizer | Ska Fabricating Co. | – | Enclosed depalletizing system with safety guarding | 2018 - Can Conveyor System | KHS / AE | – | Overhead and floor-mounted conveyor network for empty cans and line transfer | 2018 - Ionized Air Rinser | Ska Fabricating Co. | AV-C500 | Empty can rinsing / cleaning module before filling | 2018 Kedpfjy Tt H Dox Anisdu - Can Filler | KHS | Innofill Can C | Automated can filling system | 2018 - Fill level detection | Heuft | - - Can Seamer | Ferrum | FC03 | Rotary can seaming unit | 2018 - Can dryer | Air control industries | 2018 - Labeller | Pack Leader Advanced Dynamics | Pro-516 | Labelling machine incl. roller feed | 2018 - Case Packer | Atlanta | Rafaello 726 | packaging system | 2018 - Case Packer Printer | SATO | S86-EX | 2018

Condition: good (used), 1 x Capping Machine, with lid feed and outfeed table. Suitable Cap Types Screw Cap, Jar, Foamer, Dropper, pre-formed ROPP Cap Diameters 18 – 70mm (extended to 90mm) Bottle Height 30 – 300mm Power Supply: AC220V/110V 50-60HZ Working Speed: 20-60 /min (depending on bottle and cap size and shape) Working Air Pressure: 0.4-0.6MPa Dimensions: Approx 1930(L)x740(W) x1600mm(H) Kedpfx Aozzxd Ijniodu *Video available on request*