Used Konecranes Cxt 600 30 T (2622) for sale (88,089)

Condition: new, - Basic shelf - wide span shelving, new dimensions: L 2050 x H 2500 x D 600 mm incl. 4 shelves Ncedpocfbzfsfx Akfer shelf load: ~ 300 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic rack consisting of: 2x shelf uprights, 600x2500mm unassembled, incl. cross and diagonal braces, plastic base plates 8x crossbars 1950 mm, incl. safety pins 4x shelves approx. 1940x545mm, thickness: 22 mm

Condition: new, axle configuration: 3 axles, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2023, Tyre size: 385/65 R22.5 Axle brand: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: Tyre tread left: 100%; Tyre tread right: 100% Rear axle 2: Tyre tread left: 100%; Tyre tread right: 100% Rear axle 3: Tyre tread left: 100%; Tyre tread right: 100% Nedpfx Akjv A Tx Hjfjcr Damages: none

Condition: like new (used), Year of construction: 2024, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 9850, total length: 7,500 mm, overall weight: 900 kg, input voltage: 400 V, Equipment: documentation/manual, Sale of an LCT T 600 demonstration pass-through washing system from 2024 at a special price Zones of the pass-through washing system: Zone 1: Main washing zone: Length: approx. 2600 mm Pump: 7.5 kW, 60 cbm/h Tank capacity: approx. 400 l Water heated with 3 electric screw-in heaters each 10 kW Operating washing temperature: approx. 60° C Zone 2: Rinse zone Length: approx. 2200 mm Pump: 3 kW, 33 cbm/h at 3 bar Tank capacity: approx. 350 l Water heated with 2 electric screw-in heaters each 10 kW Operating washing temperature: approx. 60° C Zone 3: Hot air drying zone: This serves for all-around mechanical air blowing (from below, the sides, and above) of the water droplets located on the surface of the washed goods, which are blown off by air knives and built-in high-pressure fans. The conveyor belt is equipped with a plastic belt. The frame is made of stainless steel 1.4301, has its own drive, and is controlled via the system’s PLC control. The conveyor belt brings the washed goods out of the machine, makes a 90° curve to the left, and then conveys the goods towards the machine entrance (where the items to be washed are placed on the machine). There are 3 photoelectric sensors at different points on the conveyor belt, equipped with special holders and mutually facing reflectors on the stainless steel structure. Belt width 400 mm / height up to 400 mm Ncodpfjwpq Evsx Akfer (At the beginning – 1 sensor before the curve, 1 sensor at the end, and 1 sensor approx. 2 m before the end) is a buffer zone (1-2 m long). As soon as the buffer zone is filled with returning washed goods, the machine and the conveyor belt stop automatically.

Year of construction: 1981, condition: used, Technical details: height over floor: 850 mm total power requirement: 2,5 kw temperature: 200 °C voltage: 220/50 V / Hz weight of the machine approx.: 80 kg space requirement of the machine approx.: L:0,85xB:0,6xH:1,15 m Application area: drying device internal dimensions: W: 0,50 x T:0,42 x H:0,60m Ncsdpfxju N Agks Akfjr door opening : W:500 x H:600mm The internal room does have 3 shelves ( depth 370 x W: 490mm) upper shelf inlet has been taken out, because the thermometer gets deep into the room ( see picture / comparable) Oven has been tested up to 160°, with limitation on sale, 2 heating rods up are OK and 2 heating rods down are not working! *

Condition: used, Year of construction: 2011, weight max. in kg 3000 kg serial number H2X393B03409 Number of working hours 12550 h Ncsdpfsxzuzvox Akfsr

Condition: used, Year of construction: 2011, stroke 5 m Nsdpfx Aoxzuzpskfscr Number of working hours 18800 h 55 % weight of the machine ca. 4,84 t

Condition: used, mileage: 5,68,811 km, power: 162 kW (220.26 HP), first registration: 11/2012, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2026, color: blue, gearing type: automatic, emission class: euro5, Year of construction: 2012, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, * Vehicle ID for customer enquiries: 4601 * Rear axle differential lock * Air conditioning * Automatic transmission * Environmental badge (green) * Air suspension * Electronic Stability Program (ESP) * EBS (Electronic Braking System) * Cruise control * Particulate filter * Power windows * Anti-lock Braking System (ABS) * Two-seater Nsdpfx Aoyk Nttekfocr * Air-operated engine brake * Power steering * Electrically adjustable side mirrors * Steel rims * Full service history * 2/3 doors No liability for printing or typographical errors. Sale exclusively to commercial customers. Subject to prior sale and errors. Changes, prior sale, and errors expressly reserved. The description serves identification purposes only and does not constitute warranty within the meaning of commercial law. The description in the purchase contract is binding. * TOP SERVICE + QUALITY * We are happy to offer you a LEASING-FINANCING-PURCHASE OPTION deal Warranty insurance available on request from the insurer * TÜV / UVV LBW / Tachograph inspection and installation of OBU device can be arranged locally by our partners * Export plates for 30 days All export documentation possible but must be requested individually * TOLL registration for Toll-Collect can be arranged on site * Free transfer from Stuttgart Airport or Metzingen (Württ) train station * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit us on our website at * Over 200 vehicles in stock at all times

Condition: excellent (used), Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread, lashing point , Loadbock thread with foldable rotatable load bracket unused Ovp -Type: VLBG 5 t M 30 Ident-No .: 850 08 13 -Carton: content 4 pieces -Quantity: 12 cartons available Njdpfxeg Akame Akfscr -Price: per box -Weight: 15 kg / box

Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table Nedpeqddi Usfx Akfocr -Clamping table: milling machine table -Table surface: 600 x 220 mm -Y-axis: 130 mm movable, hand crank with fine adjustment, see photos -T grooves: groove width 12 mm, groove spacing 45 mm -Total dimensions: 690/490/H300 mm -Weight: 72 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: Milling machine table -Table surface: 400 x 600 mm -T slots: Slot width 14 mm, slot spacing 50 mm -Rotatable. Manually operated with 6 mounting screws. -tiltable and swiveling: via cranks Ncodpfx Aehubc Nskfer -Fits Deckel Mikron WMW and other milling machines -Overall dimensions: 700/600/H345 mm -Weight: 198 kg

Condition: new, pressure 30 t stroke 350 mm table surface area Arbeitsbreite 750 x 260 mm pressure 221 bar oil volume 37 dm³ work speed max. 9,8 mm/sec return speed 14 mm/sec total power requirement 3 kW weight of the machine ca. 385 kg Inner diameter of the cylinder [mm]: 130 Piston rod diameter [mm]: 55 Diameter piston head [mm]: 80 - Integrated pressure gauge - Pressure regulator - Hydraulic unit with variable speeds - Working table adjustable in height - Joystick to control piston and speed The workshop press (30T) has a fixed cylinder and a high adjustable work table (motorized). Equipped with pressure regulation, Pressure gauge, variable speed and a joystick to move the piston up and down to move off. With this joystick you can also control the speed adjust, making this motorized hydraulic press perfect for precision work is suitable. Nodsi A S I Dopfx Akfscr

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 400 x 600 mm -T slots: Slot width 12 mm -rotatable -tiltable and swivelling via cranks -Fits Deckel Mikron WMW and other milling machines -Weight: 200 kg -Quantity: 1 available Price: per piece Ncodpfxeb A Iyuj Akfjr

Condition: used, Year of construction: 2010, Manufacturer: Eratis Model: ICH 600 T Year : 2010 Type : climatic chamber Cooling unit - refrigerant : R134A Power : 1,5 KW Useful volume : 600 L ( 65 x 65 x 140 cm) Nedpfox R Aqmjx Akfecr Temperature : +15°C to 55°C

Condition: excellent (used), CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Nodowfdnijpfx Akfscr Includes metal struts to increase the floor load-bearing capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range -40 to +180°C Temperature deviation ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg For your safety, please note the following information! The following steps are performed on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), CTS Type: T-70/600/S Water-cooled temperature test chamber Control system: - 32 bit controller - LCD control panel - Digital display of set and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Technical performance data Temperature tests: Nodpfeu U Ixmjx Akfocr Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at + 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions Height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions Height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Nominal current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), CTS Type: T-70/600/S Temperature test chamber water-cooled Refrigerant: Converted to R-452A Control: - 32 bit controller - LCD control panel - Digital display of setpoints and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at + 0°C Nsdpsvitmdsfx Akfscr approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions Height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions Height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Nominal current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2011, condition: excellent (used), CTS Type: T-30/950 Ex/I CTS Temperature Test Chamber, Explosion-Proof Control – 32-bit controller LCD control panel Digital display for set and actual values Numerical input of set values Error messages in plain text RS 232 interface Free switching channels for product-side test specimen activation Temperature Testing: Nsdpfeihb Amjx Akfocr Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate: Heating: 2 K/min Cooling: 1.5 K/min down to -10°C Thermal radiation: approx. 1000 W at +20°C approx. 200 W at -25°C Nitrogen inerting with residual oxygen monitoring With nitrogen inerting, the test chamber is first purged with a large flow rate of N2 until the o2 content drops below 3%. Then, it switches to a base flow amount (approx. 10% of the large flow rate). The nitrogen flow for the base amount is measured and displayed using a flowmeter and monitored via a limit switch. O2 monitoring continuously extracts gas from the test chamber via a flame arrestor and passes it over an O2 sensor which checks the residual oxygen content of the extracted air. Afterwards, the gas is returned to the test chamber via a second flame arrestor. The extraction pump is monitored by a volumetric flow meter. Additional details can be found in the Dräger user manual in the appendix. The gas system is currently deactivated! All technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 950 liters Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm Operating data: Electrical connection: 400V +6/-10 %, 3/N, 50 Hz Nominal power: 21.6 kW Rated current: 36.5 A Protection class: IP 54 Condensate drain: non-pressurized, R 1/2" inner thread Sound pressure level:

Condition: used, Technical specifications: Nedpfxoyftvzo Akfscr - Load capacity approx. 30 t - 2 crane mounting holes with through pin 80 mm - Distance between mounting pins: 100 mm - 2 attachment holes with diameter 65 mm - Distance between attachment holes: 235 mm - Lifting height: 800 mm - Overall height: 990 mm - Main beam: HEM 360 - Spreader dimensions approx.: L 3150 x W 400 x H 480 mm - Weight approx. 450 kg

Year of construction: 1990, condition: excellent (used), O F F E R Subject to prior sale and errors excepted, we can offer you, without obligation, the following ex-stock: D E G E N Manual Cutting, Pointing, and Cylindrical Grinding Machine for Ejector Pins Model: T Year of manufacture: 1990 _____ Grinding carriage center height: approx. 200 mm Grinding wheel Ø x bore: 200 x 30 mm Grinding wheel speed: approx. rpm Grinding wheel drive power: approx. kW Workpiece headstock center height: 160 mm Ncsdpfxsxzuuvo Akfjr Workpiece headstock longitudinal adjustment: approx. 100 mm Workpiece headstock transverse adjustment: approx. 200 mm Workpiece headstock swiveling either side: approx. 2 x 30° Collet chuck capacity: 0.5 – 20 mm Weight: approx. 500 kg Accessories / Special equipment: • Workpiece headstock swiveling for pointing and deburring • Collet chuck with approx. 10 different collets • Plexiglass safety guard for grinding wheel • Compact, free-standing on sturdy base • Optional cross-slide feed unit Condition: good to very good – under power, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further tool grinding machines available from stock – please enquire!

Condition: used, Year of construction: 2017, total length: 2,850 mm, lifting height: 195 mm, load capacity: 2,800 kg, Ausgelegt für 8000kg Tragkraft auf der Gabel Ncedpfx Aoxd E Hbokfsr

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 207306 - 6813, grinding length: 600 mm, grinding width: 300 mm, grinding wheel diameter: 300 mm, spindle speed (max.): 3,000 rpm, grinding spindle motor power: 8 W, No minimum price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Grinding length: 600 mm Grinding width: 300 mm Nsdswm H I Ispfx Akfecr Spindle and Drive Spindle speed: 0 – 3,000 rpm Grinding spindle motor: 7.5 kW Total power requirement: 7.5 kW Grinding Wheel Grinding wheel diameter: 300 mm Grinding wheel dimensions: 76 x 20 mm EQUIPMENT - Magnetic table - Surface grinding machine

Condition: used, Year of construction: 2010, Milling machines Ncsdpfx Akov D U Apsfer Travel distance X: 760 mm Travel distance Y :510 mm Travel distance Z: 610 mm HSC-machines Number of axis: 3 milling machine / machining center Control: Hurco WinMax spindle chuck: SK - A40 spindle revolutions: 12000 rpm table size X: 1020 mm table size Y: 508 mm max. workpiece weight: 1350 kg tool changer: 24 - time input Power : 13,5 kW Torque: 214 Nm Rapid traverse: 35 m/min spindle cooling chip conveyor

Condition: new, Year of construction: 2024, pressure 30 t throat 180 mm Ncsdpfevfhqvsx Akfer stroke 8-76 mm no. of strokes 80-200 Hub/min ram - range of adjustment 60 mm table surface area 360x580 mm table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. BxTxH 1350x1200x2100 mm

Year of construction: 2023, condition: new, pressure 30 t throat 180 mm stroke 8-76 mm no. of strokes 80-200 Hub/min ram - range of adjustment 60 mm table surface area 360x580 mm table height 840 mm Ncedep Uduhepfx Akfsr hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. BxTxH 1350x1200x2100 mm

Condition: new, Year of construction: 2024, pressure 30 t throat 180 mm stroke 8-76 mm no. of strokes 80-200 Hub/min ram - range of adjustment 60 mm table surface area 360x580 mm table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. BxTxH 1350x1200x2100 mm Nedpfxsvfhq Ae Akfocr