Used Kramer Grebe & Cfs Bowl Chopper for sale (1,225)

Condition: used, Year of construction: 1981, sheet width 1020 mm plate thickness 1,5 mm daylight opening max. 85 mm weight of the machine ca. 240 kg Smallest bending width factor 10 x sheet thickness s Chedoxbtrtjpfx Ab Uea Smallest inner radius factor 1.5-2 x sheet thickness s Lowering capability of the lower and bending beams 20 mm On this swing-beam bending machine, the beams and side stands are reinforced with particularly strong ribbing. The cross-sections are designed to be strong enough to bend even narrow offsets. On the AML 1000 model, the bending beam is balanced by a gas pressure spring. The opening width of the upper beam and the lowerability of the lower and bending beams are generously dimensioned. The machine is being sold as defective because the connection between the lower frame and the right side stand is broken (see photo taken from behind)!

Year of construction: 2005, condition: good (used), machine/vehicle number: 815 1015 1794, Manufacturer: CFS Germany GmbH Type: JuniorPak M420 Year of manufacture: 2005 Voltage: 400 V Phases: 3-phase + N + PE Current: 29 A Power: 20 kW Frequency: 50 Hz Weight: 2200 kg This is a thermoforming machine (deep-draw machine) for the production of vacuum-packed or MAP-packed food. It is designed for medium-sized production lines and is often used for meat, cold cuts, cheese, fish, and ready meals. How the JuniorPak M420 works 1. Bottom film feeding A roll of plastic film is mounted at the rear of the machine. The film is drawn forward using conveyor chains with grippers. Common materials: APET/PE PA/PE PP PET barrier film 2. Heating The bottom film enters the heating zone. Here, the plastic is heated to approximately: 90–140 °C, depending on the material type. The temperature is controlled by electric heating plates. 3. Deep drawing This is the machine's most important process. The mold closes. Chsdpfx Abozka Ruo Uoa Then, usually: vacuum is applied under the film compressed air is applied above the film, if required the film is drawn down into the mold The result is finished plastic containers or trays. The forming depth is determined by the mold. 4. Filling zone After forming, the process stops. Operators or automatic equipment place the product in the trays. Examples: meat burgers bacon cheese fish 5. Top film A new film is fed in from above. This lies over the product. 6. Vacuum/MAP The sealing chamber closes. The machine can: create a vacuum flush with gas seal directly In MAP, the following are often used: CO₂ N₂ O₂ The gas mixture depends on the product. 7. Sealing The top film is sealed to the bottom film. Sealing occurs with: temperature pressure time These three parameters are crucial for a tight seal. 8. Cutting The cutting tool cuts each individual package. Excess film is transported out as scrap. 9. Ejection Finished packages are transported out onto a conveyor belt. They can then: be labeled be weighed be checked with a metal detector be packed in boxes A JuniorPak M420 normally consists of: Frame made of stainless steel Film transport with chains Heating station Forming station Filling zone Vacuum/MAP chamber Sealing tool Cutting tool Ejection conveyor Vacuum pump Pneumatic system Hydraulics (on some models) PLC control with HMI Typical technical data For the M420 series, typical values are: Maximum film width: approx. 420 mm Forming depth: up to approx. 100–120 mm, depending on the tool Cycle time: 5–15 cycles/min Capacity: from a few hundred to several thousand packages/hour, depending on the product and tool Connection: 400 V 3-phase Power: 20 kW (as shown on the nameplate)

Condition: not inspected (used), 7m 600mm thermal oil fryer with top hold down belt. Has come direct from production. 7m frying length, 600mm belt width. Electric canopy hoist. Chodpfx Abjht Hgnj Uoa

Condition: not inspected (used), 7m x 1000mm thermal oil fryer with top hold down belt. Has come from factory producing chicken burgers and nuggets for major fast food chain. 7m frying length, 1000mm belt width. Cjdeigruyepfx Ab Ujha

Condition: good (used), 400mm wide screw feed former with recent control screen upgrade by GEA. Has been used for production of vegetarian products. Can be supplied with other machines to make a complete coating and frying line. Chjdpfx Absg E S H Rs Uja

Condition: used, Manufacturer: CFS Model: BR3000/600 Year: 2002 Condition: Used Chedozcfpuepfx Ab Uja Serial Number: 1419 Stock Number: 3276 Belt width: 600 mm Frying length: 3000 mm Heating: electric, 80kW Power: 3 x 400V, 50Hz, 90kW Dimensions: 5400 x 1750 x 2800 mm Hold down belt, sediment removal, circulation pump, manual hoists

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, The machine is ready for operation after the inspection. Chodpfozcvqisx Ab Uea

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1988, working width: 3,000 mm, type of crowning: manual, sheet thickness (max.): 6 mm, total length: 2,500 mm, total width: 4,500 mm, total height: 2,500 mm, Equipment: documentation/manual, emergency stop, Hydraulic pivoting bending machine Manufacturer: KRAMER, Type: AMautVIIhy3000 Chodjy T R Swjpfx Ab Uja Year of manufacture: 1988 Technical data Manufacturer: KRAMER Type: AMautVIIhy3000 Year of manufacture: 1988 Usable length: 3030 mm Sheet thickness: 6 mm Stroke: approx. 300 mm Dimensions: approx. L x W x H 4.5 x 2.5 x 2.5 m Equipment: • Bending angle adjustment via potentiometer! • Controlled rear stop, 1000 mm • Segmented gooseneck tool • Bending rail + reinforcing rail • Manually adjustable crowning • Documentation All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: excellent (used), Kramer SBMM 70 Kramer SBMM 70 beading machine edging machine, slitting machine, roller Cedpfjra Nw Iex Ab Usha Manufacturer: Kramer type: SBMM 70 max. plate thickness: 1.75 Cylinder center distance: 70 mm Maximum working depth: 280 mm Drive power: 1.1 kW Operating speed: 4.5/9 meters/minute constant. Operating speed with stepless drive: 2.5-21 mm shaft diameter Weight: 190 kg ​

Condition: like new (used), Year of construction: 2007, functionality: limited functionality, Full stainless spiral. Currently Built up in storage. Cjdpfx Ajurhv Iob Usha 410 Belt width 2100 Drum diameter 3620 Overall width 5681 Infeed to discharge 135 Tier pitch 16 tiers Requires evaporator & control panel refurbishment

Condition: excellent (used), Year of construction: 2009, Large working width: 1020 mm For sheet metal (with a tensile strength of 40 kg): up to 2 mm Small bending width: 10 x s Small inner radius: 1.5 - 2 x s Opening width of the upper die: 190 mm Highest working point of the upper die: 120 mm Lowering distance of the lower die: 60 mm Small box profile (W x H): 165 x 125 mm Chodpfey S Abuex Ab Usa Space requirement (W x D): 1700 x 550 mm Height with raised counterweight: 1650 mm Weight: 560 kg

Condition: used, functionality: fully functional, color: yellow, overall weight: 6,000 kg, Year of construction: 2013, operating hours: 861 h, machine/vehicle number: 346041421, Equipment: all wheel drive, cabin, pallet forks, standard shovel, Kramer Allrad 346 | 2013 | 45 kW | Wheel Loader For sale: Kramer Allrad 346 wheel loader, manufactured in 2013. A robust, German-made machine suitable for loading operations, warehouse work, yard maintenance, agricultural applications, and use in production companies. Data from the nameplate: Brand: Kramer Allrad Model: 346 Chodpfxozcf Nzj Ab Usa Version: 346-04 Year of manufacture: 2013 Power: 45 kW Operating hours: 861.7 h Visual condition: Good Included: forks / bucket Additional information: The machine was used during the construction of a warehouse. Known defects / work to be done: Worn driver’s seat. VAT invoice: Yes Location: Kostrzyn nad Odrą, 66-470, Poland

Condition: used, GEA CFS CMV CutMaster Vacuum 500 Cutter The CMV500 Vacuum CutMaster is an advanced industrial cutting and mixing machine widely used in the food processing industry. This cutter is ideal for processing meat, game, fish, poultry, vegetables, fruit, vegetarian products, pet food, and cheese. Thanks to its powerful performance and efficient operation, it is perfectly suited for large-scale production of finely chopped and mixed products. The machine is equipped with a variable knife speed control, which can be adjusted according to the type of product, a vacuum system (for use with an external vacuum pump), and a 200 L standard trolley lift with ejector. The machine is fully manufactured from durable stainless steel and is designed for intensive industrial use and easy cleaning. Specifications: - Bowl capacity: 500 L - Knife speed, frequency controlled: 50–3600 rpm (144 m/s) - Number of bowl speeds: 2 - Vacuum system (external vacuum pump not included) - Equipped with a 200 L standard trolley lift - Equipped with an ejector - Voltage: 400 V (3 + N, 50 Hz) - Power: 172 kW - Weight: 7000 kg - Year of manufacture: 2007 - Machine dimensions (W × D × H): 3350 × 2960 × 1790 mm Csdpfxszfzxpe Ab Ujha

Condition: used, Compressed air system with compressed air compressor and compressed air tank - KAESER SK26 screw compressor (built in 2005) - Gebre GmbH compressed air tank with a capacity of 750 litres (built in 1996), standing on 3 feet with pressure gauge. Additional title: air compressor with compressed air tank Delivery appr.: 2,2 m3/h Max. working overpressure compressor: 10 bar Gross volume compressed air tank: 750 l Max. working overpressure compressed air tank: 11 bar Power: 15 kW Current: 400 V Voltage: 35 A Frequency: 50 Hz Length: 0,8 m Width: 0,8 m Height: 1,03 m Weight: 290 kg Operation / Control: control panel on compressor Chjdsw Tbtkjpfx Ab Uja Base construction: tank vertical on 3 feet Features: air compressor, compressed air tank

Condition: excellent (used), Year of construction: 1982, Hydraulic guillotine shear, manufacturer KRAMER, Model: TM 3 Hydr. 2000, Year of manufacture: 1982, in very good original condition. Cutting capacity: 2000 mm x 12 mm in steel. Equipped with hold-down device, angle stop, and manual back gauge up to 750 mm, machine feet, and machine documentation available. Very good condition. Machine dimensions: width 3100 mm, depth 2450 mm, height 2250 mm, weight approx. 5500 kg. Cjdpfoy Siftox Ab Uoha

Condition: used, empty load weight: 4,940 kg, maximum load weight: 13,060 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/1994, loading space volume: 10 m³, suspension: steel, tire size: 385/65R22.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, SAF axles, turntable, leaf suspension, ABS (anti-lock braking system), U-protection, side aluminum driving protection, rotating beacon, rear outlet Chodpfx Asvhihbob Usa Superstructure: Müller tank superstructure type WM A 100 with 10,000 l tank capacity for transporting faeces 2x 9 t SAF axles, drum brakes! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, mileage: 1,001 km, power: 15 kW (20.39 HP), gearing type: other, fuel type: diesel, color: grey, empty load weight: 1,600 kg, number of seats: 2, first registration: 07/1938, Year of construction: 1938, driver cabin: other, Equipment: trailer coupling, Vehicle location: Bovenden, Manufacturer/Brand: Kramer Model series: K-series Model: K 18 (K 18 M) Construction: Carrying frame Production period: 1936?1950 Number of units: 6768 Dimensions Dead weight: 1650 kg Length: 2820 mm Width: 1450 mm Height: 1440 mm Wheelbase: 1800 mm Ground clearance: 250 mm Track width: 1250 mm front: 1250 mm Rear: 1250 mm Turning radius without steering brake: 2500 mm Standard tires: front: 5.50 x 16 rear: 8.00 x 20 Chodpfx Ajvhlkleb Uja Engine Rated power: 11.7-14.6 kW, 16?20 hp Rated speed: 1500 rpm Number of cylinders: 1 Displacement: 1639 cm³ Fuel: Diesel Cooling system: Evaporative cooling Drive system Drive type: Rear-wheel drive Gearbox: 4/1 gearbox Maximum speed: 15 km/h ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, Year of construction: 1988, machine/vehicle number: 46922, sheet width:2.050 mm plate thickness:1,5 mm Chodocxxraepfx Ab Uoa distance between columns:2100 mm column arm:100 mm table width:300 mm number of strokes - loaded:50 total power requirement:4,0 KW weight of the machine ca.:1,85 t

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CFS EcoCut Cap 2 | Emulsifier / In-line micro-cut chopper Manufacturer: CFS Model / Type: ECOCUT CAP 2 Serial number: 5000068187 POS 31 Year of manufacture: 2011 Chsdpoy Ub E Dsfx Ab Uja Power supply: 400 V / 3 phases / 50 Hz Rated current: 358.5 A Rated motor power: 204 kW Overall dimensions: 3300 × 2050 × 2850 mm Includes a pallet box with parts. The CFS EcoCut Cap 2 is an advanced, extremely powerful industrial emulsifier (in-line micro-cut chopper) manufactured under the CFS brand. This 2011 model is designed for continuous operation in high-capacity production lines, where it is crucial to obtain a perfectly smooth, stable emulsion and maximize the particle size reduction of the raw material. Equipped with a giant 204 kW motor operating at 358.5 A, this emulsifier easily handles the most demanding tasks, ensuring excellent disruption of protein and fat structures. It is an indispensable piece of equipment in the production of high-quality sausages, frankfurters, pates, mortadella, as well as in the pet food industry and in the production of ready meals and sauces. Key features and advantages: - Unmatched power (204 kW): The large power reserve allows for stable, multi-hour operation at maximum throughput, without the risk of overloading the drive, even with very dense product feeds. - Advanced Micro-Cut system: The in-line cutting system guarantees precise, repeatable cutting and homogenization. It enables the achievement of an ideal degree of emulsification, which improves the binding of water and fat, increasing efficiency and enhancing the texture of the finished product. - Automation and integration: The EcoCut Cap 2 model works perfectly in an automated process line, directly with mixers or kneaders, eliminating the need for manual transport of the raw material and accelerating the production cycle.

Condition: excellent (used), power: 34 kW (46.23 HP), fuel type: diesel, color: other, lifting height: 2,800 mm, Year of construction: 2023, operating hours: 1,340 h, Technical information Number of cylinders: 4 Engine capacity: 2.190 cc Engine type: Yanmar 4TNV88 Measures Dimensions (LxBxH): 479 x 165 x 239 cm Weights Empty weight: 2.620 kg Carrying capacity: 1.700 kg GVW: 4.320 kg Functional Quick coupler system: Yes CE mark: yes Condition Technical condition: very good Visual appearance: very good Chodpfxszcb Duj Ab Uoa = Additional options and accessories = - 3rd hydr. circuit - Beacon(s) - Blower - Boom suspension - Hydraulic quick coupler - Mudguards - Pallet forks - Radio - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage V / Tier IV final General Country of production: Duitsland Condition CE type: CE Suspension arms, 30 km/h, 4-wheel steering, Bucket and pallet forks

Condition: used, Year of construction: 2004, operating hours: 3,623 h, Equipment: all wheel drive, Equipment: * 3,623 operating hours * Deutz engine with 44 kW * 20 KM/H * Bucket * Forks * Additional work lights * Quick coupler * Tires: 12.5-20 Chedpfx Aboyn Tt Es Uja Other information: * 2 previous owners * German machine * Year of manufacture: 2004 * Total weight: 6,500 kg * Wheel loader, ready for immediate use In November 2009, at approx. 1,300 operating hours, a new tachometer unit was installed. Since 1972, your reliable partner for automobiles and commercial vehicles in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke always stocks around 200 vehicles from the areas of vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options with special rates. If interested, we are happy to provide you with an individual quote! We welcome trade-ins of your commercial vehicle or construction machinery. If a new TÜV inspection is required, we will gladly provide an offer from our partner workshops. Please note: our offer is generally WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle is possible by our external partners for an additional charge. The information provided in listings, online, on price tags, and in images are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability/warranty for typing or data transmission errors. Listed equipment must be verified separately if applicable. Subject to errors and prior sale.

Condition: good (used), functionality: fully functional, Year of construction: 1975, Three-roll plate bending machine by Kramer, model RH III 80 x 1000. Working length: 1000 mm. Roll diameter: 80 mm. Cedpsww I Tmefx Ab Ujha

Condition: used, Year of construction: 1980, Hydraulic guillotine shears, Kramer type TM III HY 2500 Cutting capacity 2500 mm Cutting thickness 12 mm elketr. backgauge Cutting gap adjustment Chsdperfwyrefx Ab Uoa

Condition: used, CFS CombiGrind 2000/250 grinder-mixer Capacity: 2000 l Throat diameter: 250 mm Power: 75 kW Electrical supply: 400 V 50 Hz Cjdpsy Alwgjfx Ab Uoha Dimensions: 3200 mm x 1900 mm x 2800 mm Equipped with an infrared MultiTrack analyzer. It analyzes fat, protein, and water content in meat.

Condition: good (used), functionality: fully functional, power: 24 kW (32.63 HP), fuel type: diesel, empty load weight: 2,300 kg, Year of construction: 2006, operating hours: 2,702 h, Equipment: all wheel drive, cabin, pallet forks, Yard loader / wheel loader KRAMER 180 (340) Year of manufacture: 2006 According to the hour meter: 2,702 operating hours 23.5 kW Chodpfx Ajylubxob Uea only 2,300 kg - incl. bucket - incl. forks - hydraulic quick coupler - auxiliary hydraulic circuit up to fork carrier - cab with heating - lighting system - joystick controls - 4-wheel steering - immediately ready for operation! - incl. Luxembourg documents! Sale price: €17,900 net Affordable delivery possible!