Max. panel width: 1300 mm
Max. panel length: 3200 mm
Max. panel stack height: 1600 mm
Lifting capacity: 100 Kg
Pkd7l
Work capacity: 22 Cicli/min
Movement system: suction cups.
Mechanization to the planing machine.
Bxivj0yyjb
Automatic feeding to a planing machine.
Consisting of destacking, intermediate wood disperser, cross conveyors, longitudinal conveyors, control, etc.
Components for the reconstruction of a planer or feeding mechanization.
New and used tools like planing heads, cutters and much more, as well as accessories can be found on our homepage.
Visit us, call us or send us a non-binding inquiry.
working length 3500 mm
Btx7ilglco
Working width 250 mm
Working height 900 mm
Turning station, turning table, turning station, turntable, hydraulic press, workshop press, oil hydraulic press, workshop hydraulic press
Bhfzzq39c
-without: hydraulic unit (can be delivered at an additional cost)
-Turning station for: turning workpieces
-Interior width: 1075 mm
-Inside height: 720 mm
-Transport dimensions: 2840/1600/H2300 mm
-Weight: 969 kg
LIGMATECH OPTIMAT ZHR 30/R/065
Hawadh
Compatible Synchronized feed rate from 12-37 m/min
buffer transport length approx. 2700 mm
belt driven section length approx. 6100 mm
air table length approx. 2500 mm
The construction dates back to 2009 and is fully functional. The control takes place via a remote control. Our truck has a weighing device. The advantage is the diverse usefulness of the container truck.
Consisting of:
-Abrollcontainer with offset rear wall and inclined inlet
-Dispensing device with rotary valve especially for wood pellets
-Container roof / sliding tarpaulin
-Extractor fan for wood pellet dust
-Low pressure air conveyor system
- Cardan shaft drive
For questions and further de...
Max. panel width: 1000 mm
Max. panel length: 2000 mm
Bxd3ms9dl8
Max. panel stack height: 1400 mm
Lifting capacity: 70 Kg
Work capacity: 20 Cycles/min
Movement system: suction cups.
- Producer Venjakob
- Type H
- Working width 1.500 mm
- Overall width 1.710 mm
- Working height 870 mm + - 30 mm
- Length 8.000 mm
Bx7bhfknaq
- Feed speed infinitely adjustable by hand wheel ~ 3 - 6 m/min
- Voltage / HZ 400 / 50
working length 2000 mm
Working width 250 mm
Working height 850 - 1000 mm
loading dimensions L x W x H 2000 x 800 x 1000 mm
Weight 300 kg
Control
Pnefb
1 automatic tilting belt as work piece backtransport system.
working height 980 mm, optical eye Balluf, turning to left
(techn. Angaben lt. Hersteller - ohne Gewähr !)
Turning station, turning table, turning station, turntable, transport system, roller conveyor
-for: edge banding machine, edge banding machine, edge banding machine
-Turning station: for turning workpieces
-Roller conveyor: wide
I9ybncvlc
-Roll width: 2900 mm
-Roller conveyor length: 1500 mm
-Turning head roller: rubberized
-other roller conveyors available for an extra charge
-Transport dimensions: 1500/3850/H1950 mm
-Weight: 969 kg
Lumber package conveyor for packages 3.5 m x 1.1 m, 5 hydraulically driven lumber package rollers, hydraulically liftable and lowerable transfer device from cross to length transport, 12 further loose lumber package rollers result in a total length of the roller conveyor of approx. 13,000 mm, hydraulic aggregate with magnetic valves, switch cabinet
C99x3ckpc
Vacuum lifters BARBARIC swiveling, including hoists, equipment package consisting of:
-Vacuum lifters of uniWood B3-90 degrees - 250 comfort version, with integrated chain hoist
increased load capacity: 250 kg
Suitable for the vertical and horizontal transport of flat standard plates.
Vacuum generation is pneumatically by means of ejector.
For lifting of permeable materials (MDF of 8 mm thick), which is
Reinforced Vakkumpumpe installed.
-Technical data-
Chain hoist lifting speed: 0-10 m / min...
Max. panel width: 1200 mm
Bxdwzy7tzg
Max. panel length: 1250 mm
Max. panel stack height: 900 mm
Work capacity: 15 /min
Movement system: suction cups.
- Producer Venjakob
- Year of construction 1996
83ewm9
- Working width 1.300 mm
- Gesamtbreite 1.540 mm
- Rollenbahnhöhe 870 mm + - 20 mm
- Diameter roller 85 mm
- Roller pitch 285 mm
- alle Rollen mit Gummioberfläche
- Feed speed infinitely adjustable by hand wheel 15 m/min
- FU-Regelung für Feed speed
- Angetrieben
- Length 3.000 mm
- Motor power 0,37 kW
- Voltage / HZ 400 / 50
- Location, in stock
Total width approx. 0.66 m
horizontal length approx. 12 m
Jxcz03
height of incline 4 m
total length approx. 16 m
Turning device, edge processing, turning station, turning table, turning station, turntable, transport system, roller conveyor
-for edge banding machine, edge banding machine, edge banding machine
-Turning station: for turning workpieces
-Roller conveyor: Narrow
-Roll width: 1300 mm
-Roller conveyor length: 2900 mm
-with: adjustable baffle
-Roller conveyor: wide
-Roll width: 3400 mm
-Roller conveyor length: 1400 mm
-Turning head roller: rubberized
-Transport dimensions: 3000/1500/H96...
Transport and relay wagons
New equipment
with fold-out working platform
Platform format 1070 x 720 mm
with 4 swivel castors, swivel castor diameter 100 mm
Load capacity 300 kg
Bxt3hb0gfl
Special price 269.- (instead of 429.-)
only 5 pieces available
Availability: immediately
Storage location: Hochheim
With the separation of milled lumber, laid loose or as a package, already milled lumber can be processed economically. In a two-stage process, the lumber is separated for further processing. It is also possible to insert the separated lumber in a controlled manner in a running process.
Bygucxqhkf
The feeder is mechanically designed in such a way that even crooked logs can be fed in safely. In addition, it can be adjusted to the diameter of the wood so that only one piece is transported further, ...
Max. panel width: 800 mm
Ytzljs
Max. panel length: 1200 mm
Lifting capacity: 100 Kg
Movement system: suction cups.
Angebot ohne Entstaubung
- Producer Cefla
- Type TN 2500
- Year of construction 2010
- Working width 1.300 mm
- Overall width 1.680 mm
- Working height 900 mm + - 20 mm
Pmyyl
- Length 2.500 mm
- Belt control system
- Location, in stock
- Voltage / HZ 400 / 50
- Motor power 0,55 kW
working length 2000 mm
Working width 250 mm
Working height 970 mm
W3sc8
Weinig pressure conveying system DEF 25 to the operator in working
height for Unicontrol
Length 2000 mm
Depth 1800 mm
Brand width 250 mm
Rear roller conveyor not driven 2500 mm
Roll width 250 mm
(technical details according to manufacturer - without guarantee.)
Length 2200 mm
Band width 120 mm
Drive motor with gearbox - 0.5 kW
New conveyor belt
Mwkg08
Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor, roller conveyor
Qfcaww
-Plastic: rollers
-not: driven
-Roll width: 580 mm
-Total length: 25300 mm (15 pieces)
-Rollers diameter: 56 mm
-Roll distance: 330/500 mm
-Total height roller conveyor: mm
-Transport dimensions: 800/2150/H1150 mm
-Weight: 290 kg/complete
Picking cart
Exhibit
with 1 shelf
glued with PE grooved foam on 15 mm plywood
Back wall:100 mm grooved foam
Bottom and shelf: 35 mm grooved foam
Groove division: 46 mm grid
Number of grooves: 17
the shelf is adjustable in height
trolley width 840 mm
Trolley height: 1690 mm
Trolley depth: 600 mm
Useful depth: 560 mm
4 wheels with rubber swivel castors 100mm
Load capacity: max. 300 kg
Availability: short term
Storage location: Hochheim
Vupjky
Max. panel width: 1300 mm
Max. panel stack height: 1600 mm
Byqk9bsabk
Movement system: collet
RALPH DK
Nyyehol7
- Producer Finnrose
- Length 2.000 mm
- Belt with 1.300 mm
- Overall width 1.460 mm
- Year of construction 2003
- Length 2.000 mm
- Maschinenmaße L x B x H in Meter 2,0 x 1,5 x 0,9 m
- Location, in stock
- Voltage / HZ 400 / 50
I sell goose neck dimensions
Length 550cm Width 230cm
Height 266cm
Weight about 1200kg
Pmog2
The machine has hardly been used and is therefore as good as new.
Technical characteristics:
Vacuum lifting device AERO TIMBER 500 4M 3K St - SK
transported goods: wooden planks / wooden beams
with a closed (airtight surface)
Transport goods dimension min.: XXXX x XXX mm (L x W)
Transport goods dimensions max.: 13000 x XXX mm (L x W)
Weight of transported goods: Max. 500 kg
Transport type: horizontal transport
Designed for indoor use.
Technical data:
Load capacity at 60 % vacuum: 500 kg.
When th...
kW: 2,2
Lift arms: 1350 mm
Width: 2700 mm
Bt7wedsgwy
The board lift is in working order. Used for pack lifting before planer.
Driven parcel roller conveyor
Tech. data:
Size: 5900x1650 mm
Distance between rollers, cc: 850 mm
Roller diameter: 140 mm
Motor: 2.2 kW, 50 Hz, 400V, 3-phase
Stock no: 2000628bxm
O93d99og
Movement system: collet
Cdvaw8lq
- Producer Aagaard Finnrose
- Length 1.300 mm
- Overall width 1.460 mm
- Working height 900 + - 20 mm
Bx7dowetia
- Year of construction 2001
- Length 2.600 mm
- FU-Regelung für Feed speed
- frequency converter on site
- Location, in stock
8 PCS EACH 3000 MM LENGHT - OF WHICH 4 WITH MOTOR
V3bchq97
2 PCS EACH 1000 MM LENGHT - EX MOTOR
Spiral rollers, heavy execution 238/260 mm Ø with axle 40 mm Ø and 2 pedestal bearings, with chain wheel 16 B1/Z= 17, 15 pieces for 900 mm roller conveyor width right discharge, 11 pieces for 600 mm roller conveyor width left discharge, 15 carrying rollers 238 Ø without spiral winding for roller conveyor width 600 mm
M9tc8kqml
The stamp machine was used in the planing line.
Gorjd0hdc
Driven parcel roller conveyor
Tech. data:
Size: 6000x1500 mm
Distance between rollers, cc: 1000 mm
Bxbhfvynwa
Roller diameter: 150 mm
Motor: 2.2 kW, 50 Hz, 400V, 3-phase
Stock no: 2000627bxm
Max. panel width: 1250 mm
Max. panel length: 3200 mm
Max. panel stack height: 1600 mm
Mwkklo
Lifting capacity: 100 Kg
Work capacity: 15 Cycles/min
Movement system: suction cups.
- Producer Venjakob
- Year of construction 2001
- Working width 1300 mm
- Roller transportsystem
Cea8hqhi
- Roller diameter 80 mm
- Roller pitch 150 mm
- Length conveyor 5500 mm
- Feed speed infinitely adjustable 2 - 10 m/min
- Colour 7035
- Location, in stock
- Voltage / HZ 400 / 50
- Voltage fluctuation max. +/- 5 %
54 large rollers with double pulleys on both sides.
roll length: 1200mm
length roller + pulleys: 1275mm
roll diameter: 110mm
Bx7ajvgabn
mounting M16
weight per roll: +-20kg
ROLLER SHUTTLE WAGON with HYDRAULIC PLATFORM
Nv8y2
with IDLE ROLLER
LENGTH : 3000 MM
WIDTH : 500 MM
to loading or unloading panels from a double end tenoner or edge banding machine
VERY GOOD CONDITIONS
Length: 4240 mm,
Width: 1800 mm,
Hight: 200 mm.
Goptpgsno
Board separator system.
Driven parcel roller conveyor
Odmmz70
Tech. data:
Size: 7400x1520 mm
Distance between rollers, cc: 1000 mm
Roller diameter: 150 mm
Motor: 2.2 kW, 50 Hz, 380V, 3-phase
Stock no: 2000626bxm
Max. panel width: 1400 mm
Max. panel length: 2000 mm
90 degree transfer system: yes
Bxdxicwb0w
Technical data:
- Year of manufacture 2009
- transport length: 2.500 mm
Bx7cntscyr
- working width, usable: 1.300 mm
- Roller length 1,450 mm
- Working height: 900 +-20 mm
- Roll diameter: 64 mm
- roller pitch: 125 mm
- Feed rate adjustable (manual): 3-15 m/min
- Installed power: 0,37 KW
- Producer Superfici Elmag
- Year of construction 2009
- Location, in stock
Code: 0435
Brand: FORMETAL
Model: 1350
Motorised belt transfer for panels, furniture, doors and various materials
Technical data:
Belt width mm 1350
Belt length mm 2500
Working height with adjustable feet mm 1000
Feeding speed variator
Overall dimensions : mm 2500 x 1700 x 1000 h
Eegphit
Weight kg 250
TROLLEY with idle rollers
Bhslbklqey
width : 3000 mm
rollers width : 500 mm
Distance between the rollers : 200 mm
Heigth from the floor : 250 mm
Different type
Very good conditions
The discharge conveyor is used to transport bulk materials (chips, bark, sawdust) from the woodworking machine. Suitable for all types of woodworking machines.
Wyqg9l3
Specifications may vary based on customer requests.
Conveyor length: 3 to 20 meters
Belt width: 600-800 mm
Conveyor speed: 10-35 meters per min
Conveyor throughput: up to 30 m3 per hour
Can be installed horizontally or at an angle.
Driven parcel roller coaster
Tech. data:
Size: 5800x1550 mm
Bxbhcdkkfu
Distance between rollers, cc: 1000 mm
Roller diameter: 150 mm
Stock no: 2000625bxm
Max. panel width: 1100 mm
Max. panel length: 2500 mm
Length of conveyor: 9500 mm
Jw8sgi
Panel return for edgebander: Left
Technical data:
- Year of manufacture 2009
- transport length: 2.500 mm
- working width, usable: 1.300 mm
- Roller length 1,450 mm
- Working height: 900 +-20 mm
Cdgd7v3o
- Roll diameter: 64 mm
- roller pitch: 125 mm
- Feed rate adjustable (manual): 3-15 m/min
- Installed power: 0,37 KW
- Producer Superfici Elmag
Used Conveying machinery
Completely search Machineseeker and more than 2,00,000 used machines now.This may be of interest to you
Morlock Motors official partner of Machineseeker and Truckscout24
How to receive 100% of our e-mails
Olympic Games: Machineseeker sponsors Team Germany
