Used Lvd Mg-31/16-20 for sale (43,128)

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Iedpfx Ahjztpw Nenoig Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: like new (used), Year of construction: 2019, tube diameter 28 mm wall strength 2 mm bending radius min. 90 mm Iijdpfxsxcuhrs Ahnsg control 3D TubeSoft Slim total power requirement 3,5 kW

Condition: ready for operation (used), machine/vehicle number: 89915, Drive system = compressed air, Material/air ratio = 16:1, Maximum material pressure = 90 bar, Air inlet pressure = 1 to 6 bar, 4 double strokes per 1 liter of material, with MX type spray gun with double hose, unused since the last maintenance in 01/20, Condition as inspected, Ex works, from warehouse Seevetal, subject to prior sale. Iiedoiv Huwspfx Ahnog

Condition: used, functionality: fully functional, machine/vehicle number: W41173J06081, Year of construction: 2018, operating hours: 3,108 h, load capacity: 1,600 kg, lifting height: 2,930 mm, free lift: 1,450 mm, fuel type: electric, construction height: 1,930 mm, empty load weight: 1,385 kg, drive type: Elektro, High lift truck Fahrgestellnummer: W41173J06081 Technical condition: good Iiedpeuhw T Tofx Ahnog Front tires type: Polyurethane Battery Volt: 24V Battery Ah: 300Ah Battery year of construction: 2021 Description: Linde L16 AP No.: M0305 Year of construction: 2018 Operating hours: 3108 The device is visually and technically in good condition. Subject to errors and prior sale. If you have not found your truck, please contact us. We have a large selection of other devices on site. Reach-through protection Makrolon load rollers Tandem charger external Access chip Initial lift

Condition: used, machine/vehicle number: 13131, Year of construction: 2013, operating hours: 14,340 h, load capacity: 1,400 kg, lifting height: 3,400 mm, free lift: 1,570 mm, load center: 500 mm, fuel type: electric, mast type: duplex, construction height: 2,130 mm, battery voltage: 24 V, fork length: 1,200 mm, front tire size: 18x7-8, rear tire size: 15x4,5-8, overall weight: 3,097 kg, Equipment: 3rd hydraulic function, 5079899 Serial Number: 516209D00196 Iijdpfx Aeyld Rpjhneg Battery Details: 24V 5PzS 625Ah (aus 2015)

Condition: used, Year of construction: 2023, 23 electric motors from various manufacturers are offered. 1) 4 × Innomotics 1AV3104A, power: 3kW, year of manufacture: 2024. 2) Hoyer HMA3-132S1-2, power: 5.5kW, year of manufacture: 2021. 3) 2 × Innomotics 1CV3073A, power: 0.55kW, year of manufacture: 2024. 4) WEG W22 02P71, power: 0.55kW, year of manufacture: 2023. 5) 4 × Siemens 1AV3205B, power: 30kW, year of manufacture: 2020. 6) WEG W22 160L-04, power: 15kW, year of manufacture: 2021. 7) FOA AC motors, power: 2.2kW. 8) 4 × WEG W22 100L-04, power: 2.2kW, year of manufacture: 2022. 9) VEM K21R 112 M 6-4 L H TPM140, power: 1/3kW, year of manufacture: 2022. 10) 2 × CEM TCE 80MCY 4 V1, power: 0.55kW. 11) WEG W22 06P90S, power: 0.75kW, year of manufacture: 2024. 12) WEG W22 160M-06, power: 7.5kW. Inspection possible by arrangement. Iijdszvghqepfx Ahnsg

Condition: excellent (used), Year of construction: 2008, load capacity: 16 kg, arm reach: 1,611 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, The KR16 is designed for a rated payload of 16 kg in order to optimize the dynamic performance of the robot. Main Applications: - Welding - Dispensing - Additive Manufacturing Model: KR16 Isdpfx Ajw Idvkshnoig Condition: Used & Tested Year: 2008 (more options are also available) Controller Cabinet: KRC2 ED05 Included: Manipulator + KRC2 ED05 Control Cabin + All Wire Sets + Teach Pendant - FULL SET Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 500 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. (Source: KUKA's Website)"

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 10,790 h, load capacity: 1,600 kg, free lift: 2,010 mm, fuel type: electric, mast type: triplex, construction height: 2,450 mm, power: 11 kW (14.96 HP), gearing type: other, battery manufacturer: Still, battery model: 5 PZS 625, battery capacity: 625 Ah, battery voltage: 48 V, battery weight: 929 kg, fork carriage width: 980 mm, fork length: 1,000 mm, fork width: 100 mm, fork thickness: 40 mm, ground clearance: 90 mm, front tire type: polyurethane tires (non-marking), front tire size: 6.50 F-10, rear tire type: polyurethane tires (non-marking), rear tire size: 15x4,5-8, overall weight: 2,472 kg, empty load weight: 2,472 kg, total height: 2,450 mm, total length: 1,860 mm, total width: 1,130 mm, Equipment: cabin, head guard, lighting, pallet forks, sideshift, Still RX 20-16 forklift, year of manufacture 2018 -Type: RX 20-16 -Serial number: 516211J00522 -Year of manufacture: 2018 -Nominal capacity: 1600 kg -Unladen weight: 2472 kg -Battery voltage: 48 V -Nominal drive power: 11.0 kW -Maximum battery weight: 929 kg Isdey R Evlspfx Ahnsig -Minimum battery weight: 813 kg Additional information -Narrow aisle cabin -Triplex mast -Sideshift -Non-marking tires -Joystick control -10,790 operating hours -Includes charger Price: €7,850 excl. VAT For further inquiries please send a message. KayRo Trading

Condition: used, Part suitable for: trucks Price: On request VAT/margin scheme: VAT deductible Iodpfxoyxl Ecj Ahnjig Type number: 1667743

Condition: used, Year of construction: 1983, Max. bend length: 1640 mm Iedpfx Ahjzvw Rpjnoig Max. sheet thickness: 3 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Hub height of the upper gantry and material thickness adjustable via switch Manual backgauge with spring fingers Weight: approx. 1600 kg

Condition: excellent (used), Container roller set, container rollers for moving standard containers, Haacon, 16 t load capacity – used: Isdpfx Asyr Hgyshnoig Price ex location: €7,500 (net) Manufacturer: Haacon Type: 4336.16-231720 Year of manufacture: 2022 Serial number: 1074982-01-00-001-51 Component number: 215993 Load per set (4 units): 160 kN Load per unit: 60 kN Rolling speed: max. 6 km/h Container rollers for moving standard containers Steering bar for handling the roller when dismantled and for auxiliary steering with parking brake Roller set consisting of drawbar, four swivel castors, lockable in travel direction Rolling operation up to 6 km/h Original price: €9,907 Available: immediately Condition: as new – used only approx. 3 times Location: 79183 Waldkirch

Condition: used, Year of construction: 2003, - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Main spindle 12 kW - Tool changer, 18-position CNC machining center Manufacturer: Homag Type: PROFI BAZ20/30/16/V/D Year of manufacture: 2003 Technical data Homatic - CNC control CNC programming system WOODWOP Postprocessor Workpiece dimensions - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Edge band width: min. 120 mm - Weight: max. 150 kg Throughfeed table - Longitudinal console 1, fixed installation - Longitudinal console 2, manually adjustable via width adjustment in the Y-direction - 8 vacuum clamps 125 x 50 x 100 mm - Working height, bottom edge of workpiece: 950 mm Motor, width adjustment, longitudinal console, traversing table - For different workpiece widths via servo drive for throughfeed table - Per longitudinal console Chip conveyor - Chip and waste disposal via integrated chip conveyor under the longitudinal traverse Stop pins for top layer overhang - Stop pins with lifting-rotating mechanism for workpieces with max. 20 mm top layer overhang - Individually selectable, end position monitored, stroke 110 mm - For manual placement of doors Vacuum pump 100/140 m3/h Unit for positioning the vacuum clamps - Mounted on the unit carrier with pneumatic extension console - For max. 4 vacuum clamps per longitudinal console Main spindle 12 kW - Tool holder HSK F63 - Extraction system for all tools and units - Three-phase asynchronous motor 12 kW at S1, water-cooled - Tool weight: max 6 kg incl. holder - Tool length: max. 200 mm from the motor spindle bottom edge - Tool diameter: max. 180 mm for milling tools / max 200 mm for sanding tools - Frequency converter: 15 kW - Speed range: 1500 - 18000 rpm, stepless, programmable - Full rated power from 12000 rpm Unit interface for the main spindle - For connecting the machining units - Pneumatic and swivel drive interface - C-axis with torque transmission and 3-point support Tool changer, 18-position For tools and units with HSK F63 Tool weight: 6 kg Tool length: max. 200 mm from the motor spindle bottom edge The following tool and unit configurations are possible - 18 x max. 130 mm - 9 x max. 180 mm and 9 x max. 70 mm - Tool diameter max. 200 mm for sanding tools - Tool changer can be raised for a moving pick-up station on the left side Drilling/milling unit, 4 spindles, for tool changer - For automatic changing in the main spindle - Collet holder ER25 up to max. 16 mm shank diameter - Tool protrusion max. 50 mm - Speed: max. 13500 rpm - Standard collet 10 mm - Infinitely swiveling via the C-axis - Without tool Lock case milling unit, 2 spindles, D=16/20 - With integrated blow-out nozzle - Two-sided spindle outlet with counter-rotating direction - Speed: 12000 rpm - Infinitely swiveling via the C-axis Iiodpfxozux Tpj Ahnog - Without tool 1x Weldon chuck: 20 mm - Reducing sleeve for tool 16 mm - Total tool length: 180 mm - Tool protrusion: max. 135 mm 1x ER16 collet with 10 mm - Total tool length: max. 70 mm - Tool protrusion: max. 40 mm Sawing/drilling unit, swiveling, for tool changer - For miter cuts and angled drilling - Manually swiveling 0 - 90 degrees - Mounting flange 30 mm with countersunk head screws - Tool diameter 52 mm - Prepared for miter saw: max. 180 mm - Drill chuck with Weldon chuck: D=10 mm - Speed: max. 9000 rpm - Infinitely swiveling via the C-axis -

Condition: refurbished (used), battery capacity: 750 Ah, battery voltage: 48 V, total height: 625 mm, total length: 827 mm, total width: 735 mm, Tested forklift battery for your truck – 48V 6PZS 750Ah – DIN A + 1-year warranty + Incl. Aquamatic system + Incl. end cell cables & REMA 320 connector (other connectors can be installed upon request) + Capacity: min. 90-100% (C5 capacity protocol provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 827 mm Width 735 mm Height 625 mm Weight: approx. 1,020 kg Suitable for the following models and more: Linde E15S-355-00 Linde E16 - 324-00 Linde E16 - 386-00 Linde E16L - 386-02 Linde E18 - 355-00 Linde E18 - 386-02 – lateral change Linde E18C - 355-00 Linde E18 L - 386-00 Linde E18 L - 386-02 – lateral change Linde E20 L - 386-00 Linde E20 L - 386-00 – lateral change Linde E20 PL - 386-00 Linde E20 PL - 386-02 – lateral change Linde R14 X - 116-03 – frontal change Linde R14 X HIGH - 116-00 – frontal change Linde R16X - 116-00 Linde R16X - 116-00 – frontal change Linde R16X- 116-03 – frontal change Still R20-16 Still R20-18 Still RX 20-18PL Still RX 20-20 Crown SC 5360-2.0 Jungheinrich EFG Series Jungheinrich EFG 216 Jungheinrich EFG 218 Jungheinrich EFG 220 Jungheinrich EFG 222 Jungheinrich EFG 316 Jungheinrich EFG 318 Jungheinrich EFG 320 Jungheinrich EFG DF 16L Jungheinrich EFG V 20 Jungheinrich EFG VAC 320 Toyota 7FBEF16 Toyota 7FBEF18 Toyota 7FBEF20 Toyota 8FBE16T Toyota 8FBE18T Toyota 8FBE20T Blgkcdacpxv Toyota 8FBEK18T Iodpfxjy Rnndo Ahnoig Toyota 8FBMT18 Toyota 8FBMT20 Toyota/BT CBE 2.0 Caterpillar EP 16/20 Caterpillar EP20PN Cesab B320A Hyster J1.6XNT Hyster J1.8XNT Hyster J2.0XN LOC E20 Mitsubishi FB16PNT Mitsubishi FB20PN Mitsubishi FB20PNT Steinbock-Boss KE20 Common battery sizes available on request. Transport available.

Condition: excellent (used), 1 x Fanuc Back Plane 3 Slot A05B-2316-C105 1 x Fanuc A16B-3200-0042/05B900514 Board 1 x Fanuc A16B-1212-0871/17C906140 Power Supply Board Alternative search terms A05B2316C105 A16B3200004205B900514 Iijdpfx Ahew Tbyqsnog A16B1212087117C906140 A16B-3200-0042 A16B-1212-0871 A16B12120871 A16B32000042 ATTENTION: Higher quantities are available in some cases.

Condition: excellent (used), Technical Details: Working width: 3100 mm Maximum bending capacity: 16.0 mm Maximum pre-bending: 12.0 mm Top roll diameter: 300 mm Side roll diameter: 270 mm Isdpfx Ahjxyvx Tenoig All three rolls powered Hardened rolls Conical bending device by tilting of both side rolls Swiveling control panel with digital display Hydraulic drop end bearing Motor power: 7.5 kW Dimensions (L x W x H): approx. 5800 x 1700 x 1500 mm Net weight: approx. 8.5 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technical condition, and wear correspond to its age; used machines are sold without any warranty.

Condition: reconditioned (used), Year of construction: 2016, operating hours: 345 h, functionality: fully functional, working width: 1,230 mm, area performance: 8,600 m²/h, overall weight: 1,944 kg, warranty duration: 12 months, water tank capacity: 310 l, sweeping width: 1,230 mm, HAKO SCRUBMASTER B310 R CL TB1230 SCRUBBER NEW HAWKER PERFERCT PLUS 36V 640Ah TRACTION BATTERY (8PZS640) NEW NEOS 36V 100A CHARGER Manufactured in 2016 with 345 hours on the clock 1230mm cleaning head (TB1230) equipped with three new medium-hard disc brushes for work on any surface. Integrated pre-sweeper with new side brushes and a new cylindrical brush to remove loose dirt before the actual cleaning. New squeegee blades made of high-quality natural rubber are ideal for use on all surfaces. New protective rubbers around the brush head prevent water from splashing outside the machine's contours. The device is equipped with new, durable drain hoses and a new suction hose. New suction turbines ensure high water suction power from the squeegee blade. Each device we offer has individually taken photos; you get exactly what you see. TECHNICAL DATA: Working width (mm): 1230 Squeegee width (mm): 1260 Capacity (m²/h): 8600 Voltage (V): 36 Number of disc brushes (pcs): 3 Working speed (km/h): 7 Clean water tank capacity (l): 310 Dirty water tank capacity (l): 310 Weight without batteries (kg): 935 Ijdpjy Ui Aksfx Ahnjig Weight (kg): 1944 Power (kW): 7.6 INCLUDED: NEW HAWKER PERFERCT PLUS 36V 640Ah TRACTION BATTERY (8PZS640) NEW NEOS 36V 100A BATTERY CHARGER NEW pre-sweeper side brushes - MIX antistatic bristles NEW pre-sweeper roller brush - MIX antistatic bristles NEW 430mm PPL 0.5 disc brushes (3x) NEW 36V 600W suction turbines (2x) NEW drain hoses (2x) NEW suction hose NEW head guard rubbers (2x) Squeegee blade with new rubbers Tenzi Normal 5 fluid 1000 liters - FREE KEY FEATURES: The 310-liter tank with a durable, flexible divider allows for large amounts of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. A small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise solution extraction from the cleaned surface. The large working width (1230 mm) ensures high surface coverage. The control panel is easy to read and intuitive to use.

Condition: used, Year of construction: 2012, machine/vehicle number: ET192, Used Hot Melt Labeling Machine Kosme 20000 bphTechnical Specifications & Performance DataThis Kosme TOP 2 HM 16 720 is a high-speed hot melt labeler engineered for reliable performance in beverage production and industrial packaging. Optimized for PET containers, it supports demanding operations on a used bottling line while maintaining label accuracy at elevated speeds.Manufacturer: KosmeModel: TOP 2 HM 16 720Year: 2012Formats: Round PET bottle, 74mm diameter. ( can work both round and square bottle).Application: Hot melt labeling for PET containersProduction speed: up to 20,000 bottles per hour (format-dependent)Labeling stations: 1Number of plates: 16Head adjustment: availableOptical centering system: includedContainer types: PET (primary configuration)Dimensions: W 1900 mm × L 3000 mm × H 2300 mmWeight: 2500 kgElectrical: 400 V, 50 Hz, 9 kWCondition: in storage (second hand machine)Documentation: manuals availableAdvanced Automation & Control SystemsDesigned for consistent, repeatable operation, this Kosme labeler features precise hot melt application for cylindrical PET bottles and adjustable settings to support changeovers across standard beverage formats. The machine incorporates standard safety features and a centralized control interface for monitoring key parameters during labeling.Hot melt application system engineered for strong, clean adhesion at high speedOperator controls for format adjustments and production monitoringElectrical supply: 400 V, 50 Hz, 9 kW connected loadIntegrated safety protections to safeguard operators and uptimeProduction Line Integration CapabilitiesThis unit integrates smoothly into a complete used bottling line with upstream rinsing and filling systems and downstream capping, inspection, and packaging equipment. Standard connections and communication signals facilitate synchronization with conveyors, accumulation tables, and quality control devices.Compatible with common beverage line components: rinsing, filling, capping, conveying, and inspectionFormat change support via head adjustment and plate configurationSuitable for multi-SKU operations within PET bottle familiesCan operate in beverage production environments for water, juice, beer, wine, and moreMachine Condition & Maintenance HistoryThe machine is currently in storage and offered as second hand equipment. It presents a solid platform for rapid deployment when a dependable labeling solution is needed. Manuals are included to support commissioning, operation, and preventive maintenance routines. Physical inspection and test runs can be organized as part of the purchasing process for verification.Operational Performance & VersatilityWit... Iisdovguc Iepfx Ahnog

Condition: good (used), Year of construction: 1992, Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle Iisdpel Tuvdjfx Ahnjg -Manufacturer: steel, crane chassis with electric cable pull -Crane chassis: Type GO 24 20 16 -Traveling speed: 20 m/min -Roller pitch: 800mm -Cable: Type AS 2010 -Traction: 1000 kg / load capacity 4000 kg -Drum speed: 16 m/min / stroke 4 m/min -Lifting height: mm -Transport dimension: 1250/1180/H400 mm -Own weight: 356 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 1,345 h, load capacity: 1,600 kg, lifting height: 4,730 mm, free lift: 1,600 mm, fuel type: electric, mast type: triplex, construction height: 2,080 mm, battery capacity: 375 Ah, battery voltage: 24 V, fork length: 1,190 mm, front tire type: cushion tires (black), rear tire type: cushion tires (black), overall weight: 1,390 kg, total height: 2,080 mm, total length: 2,100 mm, total width: 850 mm, fuel: electricity, STILL EGV 16 2015 – Electric pedestrian stacker TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 4.730 mm Closed height: 2.080 mm Free lift: 1.600 mm Mast: Triplex (3F473) Fork length: 1.190 mm Drive: Elektro Battery: 24v/375 Ah-1600252 (2021) Charger: 24V/50A Tyres: Bandagen 2 x BA / BA Service weight: 1.390 kg Length: 2.100 mm Width: 850 mm Iisdpfxoz Ap S Ej Ahneg Year of manufacture: 2015 Operating hours: 1.345 h Condition: ready to drive Rental truck – Rental price on request. Internal no.: 1307832 Location: 14974 Ludwigsfelde bei Berlin Price on request. Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: good (used), functionality: fully functional, Year of construction: 2000, sheet thickness steel (max.): 16 mm, back gauge: 1,000 mm, cutting length (max.): 3,150 mm, foot switch Iiedpfx Ahjv Syyvonog motorized arrester behind cutting angle adjustment Technische Daten / technical details: Schnittleistung / max. cutting capacity 16 mm max. Schnittlänge / max. cutting length 3150 mm Anschlag / limit stop 1000 mm Gewicht der Maschine / weight 16300 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 14 kg, For sale is 1x Siemens SINAMICS S120 Active Interface Module for 16kW Active-Line Modules, with article number 6SL3100-0BE21-6AB0. Series: SINAMICS S120 Type: Active Interface Module The item comes from stock/spare parts inventory. The optical condition can be seen in the attached pictures. We will gladly provide further technical documentation or detailed images upon request. Inspection and collection are possible by arrangement. Shipping is possible at the buyer’s expense. Subject to prior sale, errors and changes. Iedpfx Ahezxp Dmonoig

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: M06I/8947, Offer Number: M06I/8947 Machinetype: double blow header Make: FENG PEI Type: FWB 20-165 Constr. year: 2000 diameter range: 6 mm shaft length under head: 145 mm cutting length: 165 mm output - pieces/min: 100 Location: Germany Iodpfewi Tcwex Ahnsig

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 48 V, total height: 782 mm, total length: 1,220 mm, total width: 424 mm, Tested forklift battery for your forklift - 48V 5PZS 775AH - DIN C + 1 year warranty + includes Aquamatik (automatic watering system) + includes end connectors & REMA 320 plug (other plug types available upon request) + Capacity: min. 90-100% (C5 capacity protocol provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,220 mm Width 424 mm Height 782 mm Weight: approx. 1,150 kg Suitable for the following models and others: Atlet REACH TRUCK Atlet UHD 250 Atlet UHS Atlet UMS 160 Atlet UND 140 Atlet UNS 200 Caterpillar N Caterpillar NR16N2H Caterpillar NR16NH Caterpillar NR20N2H Caterpillar NR20NH Caterpillar NR20NHA Caterpillar NR25N2X Caterpillar NR25NH Crown ESR Crown ESR 3020-1.4 Crown ESR 3020-1.6 Crown ESR 3020-2.0 Crown ESR 4000-1.4 Crown ESR 4000-1.6 Crown ESR 4000-2.0 Crown ESR 4500 Crown ESR 4500-1.4 Crown ESR 4500-1.6 Crown ESR 4500-2.0 Crown ESR 5000 Crown ESR 5000 S Crown ESR 5000-2.0 Crown ESR 5260 Crown ESR 5260-1.4 Crown ESR 5280 Crown ESR 5280S-1.6 Crown ESR 5280S-2.0 Hyster R1.0 Hyster R1.4 Hyster R1.4H Hyster R1.6 Hyster R1.6HD Hyster R2.5 Jungheinrich ETV Jungheinrich ETV 214 Jungheinrich ETV 216 Jungheinrich ETV 320 Jungheinrich ETW 216 Linde A (1250) – 5022-00 Linde A – 5224-00 Linde R 14 – 1120-00 Linde R 14 – 1120-00 – frontal battery change Linde R 14 G – 1120-00 – frontal battery change Linde R 14 HD – 1120-00 Linde R 14 HD – 1120-00 – frontal battery change Linde R 16 – 1120-00 Linde R 16 – 1120-00 – frontal battery change Linde R 16 – 115-00 Linde R 16 AS – 1120-00 – frontal battery change Linde R 16 AS 1270 – 1120-00 Linde R 16 G – 1120-00 – frontal battery change Linde R 16 HD – 1120-00 Linde R 16 HD – 1120-00 – frontal battery change Linde R 16 S – 115-00 Linde R 16 S ACTIVE – 115-12 Linde R 20 – 1120-00 Linde R 20 – 1120-00 – frontal battery change Linde R 20 – 115-00 Linde R 20 G – 1120-00 – frontal battery change Linde R 20 HD – 1120-00 – frontal battery change Linde R 20 W – 1120-00 – frontal battery change Iisdpfxoy Rnn Ds Ahnog Linde R 25 – 1120-00 Linde R 25 – 115-00 Linde R 25 F – 8923-00 Linde R 25 W – 1120-00 – frontal battery change Mitsubishi RB14 Mitsubishi RB14-25 Mitsubishi RB14N Mitsubishi RB16 Mitsubishi RB16NH Mitsubishi RB25N2X Still FM 14 Still FM 17 Still FM 20 Still FM-4W 25 Still FM-X 12 Still FM-X 14 Still FM-X 17 Still FM-X 20 Still FM-X 25 Yale MR 16 Common battery sizes are available – please enquire. Transport possible.

Condition: excellent (used), For sale: a Grundfos CRK2-260 AMA AUUV multi-stage vertical pump with a three-phase Grundfos MG 100LB2-28FT130-C motor. The unit is fully functional, tested, and ready for operation. Its technical condition is very good, with normal signs of wear and tear resulting from use. Pump specifications: Manufacturer: Grundfos Model: CRK2-260 AMA AUUV Pump power: 3.0 kW Power supply: 3-phase Frequency: 50 Hz Flow rate: 16–58 l/min Head: 107–225 m Isdpszn N T Tofx Ahnsig Motor specifications: Manufacturer: Grundfos Model: MG 100LB2-28FT130-C Power: 3.0 kW Power supply: 200–220 V Δ / 346–380 V Y (50 Hz) Rotational speed: 2880–2910 rpm Protection class: IP54 Insulation class: F

Condition: excellent (used), Load measuring device, overload protection -Manufacturer: Demag, Load measuring device, overload protection, original packaging -Type: MGS 0.63/2.20 -Item No.: 49169244 Isdpfx Ajzlxb Iohneig -Individual components: see photos -Cardboard dimensions: 285/220/60 mm -Weight: 1.1 kg