Used Raboma 12Uh 1600 for sale (2,531)

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: Fjdpfx Asyxdwdoatepl • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,300 mm, position of the milling head: 360 x 1° en 180 x 1°, spindle speed (max.): 6,000 rpm, type of input current: three-phase, total width: 9,000 mm, total height: 4,900 mm, total length: 16,200 mm, table length: 5,500 mm, table width: 2,600 mm, table load: 10,000 kg, coolant supply: 16 bar, workpiece weight (max.): 10,000 kg, grinding spindle motor power: 30,000 W, feed length W-axis: 1,000 mm, SHW Powerspeed 5 with Heidenhain iTNC530, including: • X-8,000 mm, Y-2,100 mm, Z-1,300 mm • W-1,000 mm with C-axis, with 1600 x 1600 mm (suitable for a 10T table load) • Fixed clamping table with T-slots 22 mm, 5,500 x 2,600 mm • Orthogonal machining head SK50, max. 6,000 rpm, 360 x 1° and 180 x 1° • Power P = 30 kW at 100% ED / 41 kW at 40% ED. • Tool holder SK50 according to DIN 69871/72-AD • Heidenhain measuring scales in X, Y and Z axes • Chip conveyor in articulated belt design for X-8,000 mm • External and internal coolant supply with paper band filter and 1,000L clean water tank. High-pressure pump 16 bar • Air cooling along and through the spindle • Tool magazine with 48 positions SK50 (max. Ø125 mm, max 400 mm length, max. 25 kg) • Shuttle machining capability with a fixed position for the removable partition • Dimensions L x W x H = 16.2 m x 9 m x 4.9 m (from the normal floor) Fjdpfxozz Hkpj Aatepl • Electrical connection 400V / 50 Hz / 3Ph, 65 kVA and 3 x 95A slow-blow fuse

Condition: ready for operation (used), functionality: fully functional, PANEL SAW Carriage length: 1600 mm Cutting height: 75 mm Scoring unit Tilting saw unit up to 45° Manual raising and lowering of the saw blade SPINDLE MOULDER Spindle diameter: 30 mm Spindle height: 90 mm Manual spindle raise and lower Speeds: 3500/6000/8000 rpm SURFACE & THICKNESS PLANER Working width: 300 mm Maximum thicknesser height: 200 mm 3-knife cutterhead Fpedpfszz N Nnsx Aatol Conventional knives HORIZONTAL DRILLING MACHINE 550 kg 220 V Year: 2016

Condition: refurbished (used), functionality: fully functional, load capacity: 10 kg, arm reach: 1,450 mm, controller manufacturer: ABB, controller model: IRC5, ABB IRB 1600-10/1.45 IRC5 Controller - fully refurbished and with 6 months warranty - delivered into Europe duty paid so no additional costs on top Fpsdpszcfa Tofx Aatol

Condition: used, Year of construction: 2017, Working widths 1600 mm Fpsdpfx Aastv H T Setel Roller width 1800 mm Number of rollers 2 x s-rolls Stück Swimming roll - dia 190 mm Roller covering - soft rubber 75 Grad shore Pressure line 50 N / mm Pressure total 9 to liquor trough withunder-liquor squeezing 4 rolls Capacity of dye tub ca. 48 Liter Cloth guiding system for woven fabrics curved spreader Hydraulic unit for separately pressure Drive shaft • Dye-Padder with two Swimming Rolls (S-rolls) and a small basin for CPB-dyeing, • Machine will be completely overhauled before delivery, we supply with warranty (Photo shows an overhauled machine in delivery-status), • Without drive, it must be adapted when mounting in a plant or as single machine

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 380 V, cutting height (max.): 110 mm, cutting width (max.): 920 mm, saw blade diameter: 350 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, actuation type: manual, rotational speed (max.): 3,000 rpm, total length: 1,080 mm, total width: 1,100 mm, total height: 1,600 mm, overall weight: 150 kg, Equipment: documentation/manual, saw blade guard, For sale is a DEWALT radial arm saw 1600S in very good condition (almost new) with accessories and 3 new, unused saw table shims. The saw is being sold privately and has never been used professionally, which explains its excellent condition. It is specifically designed for stationary use. Thanks to the powerful 4 hp motor, materials up to 110 mm thick can be processed with saw blades up to 350 mm in diameter. The motor runs with the highest precision on 8 large special ball bearings in the prismatically ground running surfaces of the arm. The arm, column, and frame have additional reinforcements. The DEWALT 1600S is also suitable for use with pneumatic feed in series production. With a cutting width of 610 mm, the DEWALT 1600S is the ideal machine for processing series parts in interior design, shop fitting, trade fair construction, furniture manufacturing, and the industrial production of wooden components. The saw has a sturdy metal base, three new, unused work tables, a new universal saw blade, and various accessories. The original operating manual is included. Max. cutting length (90° crosscut): 610 mm Standard cutting depth: 110 mm Max. cutting depth (45° miter cut): 60 mm Max. cutting width (rip cut): 920 mm Fpedozyymbjpfx Aatsl The saw must be picked up.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Total press force: 16,000 kN Force application point before the PMI: 18 mm Number of strokes adjustable continuously in automatic mode: 10 - 22 1/min Slide stroke: 605 mm Slide adjustment: 400 mm Mold height (stroke downwards, adjustment upwards): 1300 mm Table dimensions: 4500 × 2300 mm Slide dimensions: 4500 × 2300 mm Table height from the ground: 600 mm Table stroke: T-Track Transfer stroke: 0 - 1200 mm Internal clearance of the guide shoulder for the clamping pins (min.): 800 mm Internal clearance of the guide shoulder for the clamping pins (max.): 2400 mm Lifting stroke: 0 - 280 mm Fpedpfozldwusx Aatel Cushions in the base (hydraulic): 2 pcs. Positioning of both cushions: Motorized and adjustable Cushion force: 300 - 2000 kN Cushion stroke: 0 - 250 mm Cushion surface area: 1600 × 950 mm Pneumatic cushion in the slide: 2 pcs. Cushion force in the slide: 55 - 550 kN Maximum cushion stroke in the slide: 150 mm Left slide cushion surface area: 1450 × 1600 mm Right slide cushion surface area: 1300 × 1600 mm Maximum weight of the upper part of the mold: 36,000 kg Maximum total weight of the mold: 40,000 kg Technical data for the CISAM line: • Strip width: 300 - 1600 mm • Strip thickness: 0.5 - 3.0 mm • Tensile strength: 600 MPa • Yield strength: 400 MPa • Feed rate: 200 - 1300 mm • Feed accuracy: ±0.1 mm • Maximum feed cross-section: 4,000 mm² • Strip entry height above the table: 500 - 800 mm • Maximum coil weight: 25,000 kg • Coil outer diameter: 900 - 1,855 mm • Mandrel expansion range: 500 - 610 mm • Nominal coil inner diameter: 610 mm • Straightening rollers: 9 pcs. • Straightening unit with cassette construction

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, total length: 700 mm, total height: 1,000 mm, total width: 1,600 mm, Mobile workbench AT 1600 with stainless steel top Fpsdpfxeyhy Hio Aatol TOP workbench, suitable for catering or bakery use Stainless steel worktop Open underneath / can be painted underneath Reinforced, welded construction Dimensions approx.: 1600 x 700 x 1000 mm, WxDxH Used equipment Option: Delivery service New rollers/wheels Visit our large warehouse!

Condition: excellent (used), Year of construction: 1988, Magnet table 1.800 x 450mm, cross travel 580mm. New CNC Fagor 8037M 2018. Paper filter with magnet separator Fpodpfx Aaetqt Idotjl

Year of construction: 2021, condition: ready for operation (used), An almost like-new injection moulding machine Arburg is available. Clamping force: 1600kN, tie bar distance: 520mm, clamping stroke: 364mm, ejector stroke: 150mm, ejector force: 40kN, injection unit: 400, injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 6000mm/1800mm/2200mm, weight: approx. 6000kg, control: Selogica, operating hours: approx. 67h. Includes enclosure with clean air supply FilterFanUnit and removal robot. Documentation available. An on-site inspection is possible. Fodpfew Rqwtjx Aatjpl

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: Pal 1600, power: 180 kW (244.73 HP), input voltage: 380 V, warranty duration: 12 months, Equipment: documentation/manual, 1 pellet press brand: Paladin 1600-210 inner diameter die 850 mm tread die 210 mm Press is equipped with 2 motors each 90 KW n=1500. Press door is made of stainless steel with overload valve in door. 3 Roll press with 3 rolls on the press overhauled in a drilled or racked version Press is complete with mold lifting device and tools The press is completely overhauled and equipped with new bearings and wear parts Fpsdpfsq U R N Tex Aatol such as front and rear sliders die washer etc. Also new V-belts and toothed belt. Also, all safeties will be observed and appropriate switches on Friction safety , door switch and inspection hatches will be fitted. Refurbished pump unit for friction and V-belt tensioning Remark: Conditioner on the press is optional

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,600 mm, travel distance Y-axis: 810 mm, travel distance Z-axis: 700 mm, controller manufacturer: HEIDENHAIN, controller model: ITNC 640, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis SPINNER MVC 1600-N was manufactured in 2016. Ideal for precision machining, this vertical machining centre ensures reliable performance and durability. Consider the opportunity to buy this SPINNER MVC 1600-N vertical machining centre. Contact us for more information. Additional equipment Fpsdpfx Aeyallqjatol • Accessories: Chip conveyor Machine Benefits Technical Machine Benefits • Table size: 1800 x 810 mm • Allowed weight: 2000 kg • Automatic tool changer: atc 24 positions Extra Information Machine still under power Technical Specification Through-spindle Coolant Yes

Condition: used, Year of construction: 2018, operating hours: 3,500 h, machine/vehicle number: LC636, Used filling KHS Innofill can line 16000 CPH - year 2018Technical Specifications & Performance DataThis complete used bottling line is a second hand beverage canning system engineered around a KHS can filler block, integrated with high-quality upstream and downstream packaging machinery. Designed for industrial packaging and beverage production, it delivers reliable performance for aluminum cans.Production speed: up to 16000 cph (cans per hour)Primary filler: KHS Innofill Can C (2018)Can seamer: Ferrum FC03 (2018)Depalletizer: SKA Fabricating Can-I-BusInspector: Heuft fill level detectorRinser: AV-C500 can air rinserDryer: Air Control Industries can dryerLabeller: Pack Leader (Advanced Dynamics system)Case packer: Atlanta Rafaello 726Case coding: SATO S86-EX printerConveyors: KHS and AE Conveyors, plus KBR outfeed belt conveyor with PCUtilities/auxiliaries: Conveyor lubricator (Loewados)Container type: Aluminum cansDocumentation: Hard‑copy manuals includedAdvanced Automation & Control SystemsThe line is equipped with dedicated control cabinets for conveyors and labeling, supporting coordinated start/stop logic and smooth product handling. The KHS Innofill Can C filler block provides modern automation architecture with line-friendly integration, recipe handling, and synchronized drives for consistent filling and seaming operations. Safety interlocks and guarding are present across key stations for operator protection and process reliability.Production Line Integration CapabilitiesThis packaging line offers end-to-end integration from depalletizing to case packing, enabling seamless flow of cans through rinsing, filling, seaming, inspection, drying, labeling, and secondary packaging. Modular conveyors by KHS, AE Conveyors, and KBR facilitate balanced accumulation and stable transfer, helping maintain throughput at rated speeds. The configuration is suitable for a wide range of beverage production scenarios and can be adapted to different aluminum can sizes with appropriate change parts and guides.Machine Condition & Maintenance HistoryAs a second hand used bottling line, the core process equipment includes 2018-generation KHS Innofill Can C filler and Ferrum FC03 seamer. The asset list indicates a complete, coherent set of stations with hard‑copy manuals available, supporting efficient commissioning, maintenance, and spare parts management. The line is presented in working condition and ready for operation, subject to standard site preparation and utilities.Operational Performance & VersatilityDesigned for high-efficiency can handling, the line features a SKA Fabricating depalletizer for automated infeed, an air rinser for internal container preparation, precise isometric filling via KHS Innofill Can C, and robust double seaming with the Ferrum FC03. Quality assurance is enhanced by a Heuft fill level detector. Downstream, an Air Control Industries dryer pre... Fodpfx Aasy Szbyotepl

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, operating hours: 1,430 h, load capacity: 1,600 kg, lifting height: 5,200 mm, free lift: 1,800 mm, construction height: 2,350 mm, battery capacity: 465 Ah, battery voltage: 24 V, fork length: 1,150 mm, Stöcklin EFI 1600 Sit-down pallet stacker with initial lift. Perfect condition. Lifts 1600 kg. "2-in-1 machine" It can be used for daily handling of pallets up to 2000 kg, which can be lifted on the first lift. And in addition, it can be used as a stacker when you need pallets in racks or similar. Load capacity on forks: 1600 kg. Fodpfx Aaeu T Ecaotopl With the initial lift, you can drive over uneven surfaces, e.g. level difference between 2 halls, door opening with drop, etc. In addition, you can drive with 2 pallets at the same time. Very easy to maneuver, nice ergonomic driving position and easy to get on and off. The machine is in perfect condition. Lifting height: 520 cm. Building height: 235 cm. (With lowered undercarriage) Year: 2001 Opening hours: 1430 Large battery: 24V 465Ah Battery year: 2021. measured remaining battery capacity: 96% Charger included. Transportation can be arranged.

Condition: good (used), functionality: fully functional, mileage: 13,790 km, power: 90 kW (122.37 HP), overall weight: 6,950 kg, fuel type: diesel, axle configuration: 2 axles, fuel consumption (combined): 10 l/100km, Year of construction: 1979, operating hours: 1,500 h, 1600 operating hours / total mileage 13,800 km! Fuel consumption approx. 10 l/100 km diesel. Front loader: Schmidt FL4 with quick-change bucket and pallet forks. It has spent almost its entire Unimog life stored indoors. Never driven in winter. Absolutely no rust on the underside. Engine: OM 352, 6-cylinder, 5638 cc, 95 hp, economical – approx. 10 liters per 100 km, smooth-running with an authentic, sonorous sound. A true "one-off". This vehicle has accompanied all of my construction projects without any technical failures — now the work is finished. Selling as a collector’s item or for continued use. Includes workshop manual. I purchased the Unimog from the original owner, so I am only the second owner, for the past 14 years. First registered in November 1979. I have only driven it about 2,000 km. Transmission synchronizer rings should be replaced. Permitted gross vehicle weight (GVWR) = 6.95 t (can be driven with an "old Class 3 driver’s license"). Fedpezcmx Rofx Aatopl This registration is completely tax-exempt! "Self-propelled working machine / excavator." Annual costs only about €250 for insurance plus MOT, no emissions test (ASU) required. The vehicle is currently registered and in use / operational with MOT, everything works! Due to the 43-year service life, especially soft parts and rubbers tend to become brittle and were replaced: - Clutch master cylinder - Shift cylinder (small to large gear group) - 4/2-way valve - Cylinder head gasket The clutch housing is perfectly dry.

Condition: repair required (used), Year of construction: 1985, functionality: limited functionality, machine/vehicle number: 11710519, spindle bore: 1,250 mm, spindle motor power: 56,000 W, quill travel distance: 1,000 mm, workpiece weight (max.): 1,600 kg, Equipment: documentation/manual, Basic machine information Machine type: CNC vertical lathe Manufacturer and model: Schiess AG - Schiess Moweg GmbH; Type 12DS100 Schiess Fpedpfx Aaszvnbxotol Year of manufacture: 1985 Serial number: 11710519 Technical condition: Machine is operational; used, requires repair Technical specifications Working range: Table dimensions - Pallet D=1000 [mm], max. turning height H=800 [mm], max. turning diameter D=1250 [mm] Tailstock stroke S=1000 [mm]; adjustable cross slide - positioning every P=500 [mm] Table load capacity: 1600 kg Control system type: Siemens - Sinumerik 840 D Main drive power - 56 kW; Maximum spindle speed: 500 rpm Axis positioning accuracy: 0.02 [mm] - axis measuring system: optical scales Axis feed rate - "rapid": 6000 mm/min Axis feed rate - "working": 0.1 - 2000 mm/min Coolant - yes - through the tool Number of axes: 2-axis lathe Drive type: servo drives Additional equipment Tool magazine: 12 positions Material feeding system: loading station at the pallet magazine Palletizing system - 2-pallet magazine; pallet loading station; machine table - total of 2 pallets Chip transport system - yes Cooling system - control cabinet air conditioning - yes Operating manual - paper version in Polish and German, digital version in German

Year of construction: 2019, operating hours: 18,138 h, condition: ready for operation (used), overall weight: 25,340 kg, This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for tact us for more information. Additional information • Screw Diameter: 50 mm • Maximum Dosing Volume: 530 cc Fpsdpox D Nxzefx Aatjl • Cycles: 12875090 • Tiebar Spacing: 820 mm • Clamping Force: 3500 kN

Condition: used, ZERBST DP/S3 cnc Heavy Duty Lathe Manufacturer: ZERBST (Germany) Year: 1991 Machine Type: Heavy Duty Facing & Centre Lathe simens control Maximum Turning Diameter: Ø1,600 mm Distance Between Centres: 4,700 mm Spindle Bore: 110 mm Main Motor Power: 55 kW Spindle Speed: 3.5 – 450 rpm Bed Design: Triple guideway cast iron bed Control : Siemens Tailstock: Powered tailstock Thread Cutting: Yes Fsdoztff Njpfx Aatepl Maximum Workpiece Weight: Up to 12,500 k

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, Machine operates independently. Fpedozdrnrepfx Aatel Large format. Brushing table. Blasted for 59,000 hours.

Year of construction: 2011, condition: used, Suitable for automatically brushing (rounding edges or deburring) the teeth on HM circular saw blades. Accessories: Sawblade holder, Stepless variable speed control of the sawblade drive, Fpodpfx Aaeu Dk Edetel Pre-selectable timer. Circular saw blade diameter: 1600 mm Power of geared motor: 0,1 kW Brush motor performance: 0,75 kW Connected load approx.: 400 V / 50 Hz Weight approx: 310 kg Dimensions W x D x H approx.: 2400 x 850 x 1550 mm colour: blue/grey

Condition: used, Year of construction: 1992, Four units of used Andritz Paladin pellet presses Fpodpfxoyrng Io Aatjl

Condition: like new (used), Year of construction: 2019, Technical Data: Cross-cutting line with punching unit Strip running direction from the operator's side: right to left Coil changing side in strip running direction: left Operator's side, straightening machine in strip running direction: left Raw material: • cold-rolled strip: S320GD; S350GD; S380GD (strip-galvanized structural steels) • plastic-coated steel strip • aluminum • basically dry surface or commercially oiled • laminated strip • stainless steel Uncoiler: Type: Power Coil M-BS 1600 2 coil loading stations The coil storage track is designed so that a distance of 900 mm remains between 2 coils with an outer diameter of 1600 mm Loading semi-automatic Strip width 200 – 1600 mm Max. coil weight: 16 tons Coil diameter inside uncoiler: 508 - 610 mm Coil diameter outside uncoiler: 900 - 1600 mm Spreading range 470 – 625 mm Machine frame movable on linear guides Spreading hydraulically Strip withdrawal from the coil automatically Coil side guidance automatically, 4-point coil side guidance Press roller, rubberized, centrally positioned on the strip, hydraulically Electrical locking of lifting and traversing movement Control system: Control concept LBF – Control Concept LSV SCHULER Cross-cutting shear: Type: SCHULER HSU-1600 Shear gap adjustment is carried out by motor The shear is used to cut the strip end at a right angle before processing the first part of a production sequence. Bridging roller bed: Arrangement of the bridging roller bed upstream of the straightening machine Type: VOMA C1600 N Passage, max. strip width 1600 mm Length of bridging roller bed 1050 mm Material running height in the straightening machine 1600 mm Straightening machine: Type: SCHULER SVH 12-53-70-96 / 160-1600 Straightening speed max. 60 m/min. Straightening speed min. 5 m/min. Number of straightening rollers 12 pcs. Diameter of infeed rollers 160 mm Diameter of straightening rollers 3 x 53 mm, 3 x 70 mm, 6 x 96 mm Loop radius 1600 mm Material running height in the straightening machine 1600 mm Strip side guidance automatically Support rollers to prevent roller deflection All-roller drive Looping unit: Threading process in the direction of roller feed via looping bridge, remote-controlled Automatic loop control for continuous straightening process Loop depth below floor approx. 2,500 mm 4-point guidance through 2 sequentially arranged strip side guides To increase feed accuracy, the feed length is recorded by means of a measuring wheel (arranged in front of the feed rollers) Fpedpfx Ajzzrutoatsl Roller feed: Type: SCHULER AC-RP-160-1600 Feed rollers, diameter 160 mm Loop radius 1600 mm Material running height above floor 1200 mm Drive, upper and lower roller, servo drive via a common distributor gear Special coating of the feed rollers Max. acceleration 15 m/s² Brake rollers: Brake rollers generate the strip pull during the rewinding of the strip material from the system onto the coil, in a generator-like manner Adjustment system hydraulically Punching unit with NC tool holder: Type: SCHULER HSU-1600 Design: Double C-frame Punching unit designed as 2 C-frame units, which can be traversed transversely to the strip direction by means of 2 servomotors, for accommodating the punching tools Number of punching tools per side max. 6 pcs. Punching tool, servomotor-driven, 90° rotatable 1 punching cylinder per punching tool Punching force min. 580 kN Max. hole diameter ∅ 90 mm for material thickness 4 mm Manufacturer of punching tools: WILSON TOOL Elevating table: Type: LAWE

Condition: used, Technical details: table length: - mm table width: - mm table load: - t width: 1250 mm Fpsdpfx Aszuzrzeatel depth: 1000 mm height: 1600 mm 3pieces available (price per piece) according to DIN 650:nach DIN 650: T-Nutenbreite a=27,5; h= 55; b= 49; c= 21 mm; Abstand der T-Nuten 200 mm Spannfläche: B: 1300 x H: 1600 x Dicke: 63 mm Bei Ihrer Anfrage beziehen Sie sich bitte auf die Anzahl der gewünschten Aufspannwinkel. *

Year of construction: 2010, condition: ready for operation (used), A CO2 laser cutting and marking machine Eurolaser, which was used for acrylic glass, is available. Laser power: 200W, working dimensions X/Y: 2270mm/1600mm, max. cutting width: 2200mm, material feed width: 2350mm, table feed-through height range: 58mm-80mm, engraving resolution: 1200dpi, grayscale levels: 256, material processing: films/textiles/plastics/composite materials/paper/thin wood. Machine dimensions X/Y/Z: approx. 4000mm/2350mm/1600mm, weight: approx. 2000kg. The laser source was renewed in 2017. Documentation available. An on-site inspection is possible. Fedpfxeyviyrs Aatjpl

Condition: used, Year of construction: 2013, type of input current: AC, overall weight: 4,280 kg, input voltage: 21,000 V, input frequency: 50 Hz, nominal power (apparent): 2,100 kVA, protection type (IP code): IP00, type of output current: AC, We offer this used SGB DTTHIL 1600/20 transformer, manufactured in 2013. Rated power: 2100/1900/200 kVA Rated voltage, stage 1: 21000 V Rated voltage, stage 2: 20500 V Rated voltage, stage 3: 20000 V Rated voltage, stage 4: 19500 V Rated voltage, stage 5: 19000 V Insulation level: 24.0/1.1 kV Low-voltage AC level: 125/50 kV Short-circuit voltage: 7.5/0.8 % Maximum short-circuit loss: 2 kW Short-circuit current: 0.73 kA Frequency: 50 Hz Vector group: Dyn5 Cooling type: AF Protection class: IP00 Weight: 4280 kg Fsdpfxezwdqfs Aatopl Winding material HV/LV: Al/Al iE/iN: 8.6 T₀,₅: 0.25 s Climate class: C2 Fire class: F1 If you have any questions or require further information, please send us a message or call us. 2 additional SGB transformers of the same type from 2002 are available.