Used Radial Drilling Machine / Collet / Gamesa for sale (65,370)

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Duedpfxolhwr Re Ak Tju Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: used, Year of construction: 1984, bore capacity in steel (diameter) 80 mm arm length 2000 mm workpiece height max. ca. 1300 mm borehole diameter in Stahl 80 mm borehole diameter in Guss 100 mm threading in St 60 M 68 mm Duedoxqrc Njpfx Ak Tsu spindle turning speed range 16 - 1250 U/min Spindle Speed 32 Stück spindle bore diameter / taper 110 mm / MK 5 spindle stroke 550 mm number of feeds 18 feed 0,06 - 3,0 mm/U distance spindle/base plate 480 bis 1800 mm column diameter 500 mm spindle drive 11 kW stroke drive 4 kW total power requirement 15 kW weight of the machine ca. 8,5 t base area 3190 x 1250 x 3600 mm with work table 1200 x 1200 x 720 mm, weight approx. 800 kg

Condition: good (used), Manufacturer : MAS Type : VR 4 throat : 1000mm Dedpfx Aeh Eigbok Tsuu without table!

Condition: good (used), Projection : 915mm MK:3 Length : 1700mm Duedpfx Aed Ixy Iok Tsu Width : 1.000mm Height : 2000mm Weight: 1000 kg

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device Djdpfxeyhdvke Ak Touu • 2 T-slots (18 mm) each, machine base rear and left • Machine lamp • Central lubrication • Table surface machined on all sides • Safety guard on drill • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose to table min. mm 40 max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Data Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range rpm 15 - 2800 Torque Nm max. 250 Constant from rpm 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Condition: new, Year of construction: 2026, An industrial radial drilling machine featuring simple and rigid construction, providing a broad range of machining, such as: drilling, reaming, deepening, boring and tapping. Machine features - Drilling machine intended for drilling, tapping and reaming - Limited vibration due to a dedicated design of the machine – additional ribbing along with strengthened cast iron - Oiled gearbox, containing ground and hardened gears made of high-quality steel alloy - High weight and sturdy construction of the machine provide stability and vibration-free operation - Cube table guarantees easy workpiece fixture - Sturdy, ground column of large diameter - Ground lower plate, intended for machining larger elements - Arm height adjustment through a motor - Control panel located at the front of the drilling machine for improved convenience - Mechanical arm and head clamping - Boom arm height easily adjustable through raising motor - Hydraulically operated feed and spindle drive - Ground column surface allows for simple and accurate arm travel - Ground and hardened boom guide - Drilling machine equipped with manual head and column arm limiter - Large speed range offers precise and quick machining Technical data Maximum drilling diameter - 50 mm Axis distance from spindle to column - 350–1600 mm Axis distance from spindle to table surface - 320–1220 mm Spindle extension - 390 mm Headstock horizontal movement - 1250 mm Boom vertical movement - 590 mm Spindle taper - MK5 Spindle speed (16 gears) - 25–2000 rpm Djdpfjg Rcd Uex Ak Tjuu Feed range - (16) 0.04–3.2 mm/turn Main motor power - 4.0/5.5 kW Raising motor power - 1.5 kW Machine dimensions - 2500×1070×2840 mm Weight - 3500 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, A large and stable radial drilling machine with a large range of revolutions which ensures precise and fast machining. Machine features Large weight and sturdy design ensure stability and vibration-free operation Cube table provides adjustability and easy fixture of workpiece Control panel located at the front of the machine for improved convenience Ground column surface provides easy, precise arm travel Machine equipped with manual head and column arm limiter Large speed range for accurate and quick machining Technical data Maximum drilling diameter 32 mm Distance from spindle to base 340–1125 mm Distance from spindle axis to column surface 330–890 mm Spindle extension 215 mm Spindle taper MK4 Spindle speed 75–1200 rpm Spindle speed ranges (6): 75, 130, 240, 380, 660, 1200 rpm Spindle feed (3) 0.10; 0.16; 0.25mm/turn Horizontal plane rotation angle 180° Main motor power 2.2 kW Worktable dimensions 500×330×294 mm Machine dimensions 1400×660×2100 mm Dusdpfxsi D Daqj Ak Tou Weight 950 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Year of construction: 1979, arm length 1600 mm taper MK 5 Duodpfoyigbcjx Ak Tsu weight of the machine ca. 3 t

Condition: new, column diameter: 320messurements (LxWxH): 2670 x 1120 x 2760weight approx.: 3200drilling performance: Stahl (S235JR) - 50Drilling table T-slot size: 14Drilling table T-slot spacing: 180Clamping table length: 630Clamping table height: 500connected load: 6,5Maximum spindle to drilling table distanc: 1420speed range: 44 - 1023Number of speed ranges: 12Maximum Spindle to Column Distance: 1600- Versatile application range, e.g., drilling, reaming, threading - Electrically braked motor - 24V DC electrical system and 2-channel safety circuit according to DIN EN 12717 - Heavy, massive, high-quality cast construction - Wide reach thanks to horizontally adjustable machine head Dsdowruk Ijpfx Ak Touu - Clearly arranged control panel - Smooth swivel and travel axes - Elaborately designed column swivel with optimized clamping for maximum stability and minimal clamping offset - Robust, torsion-resistant construction of the arm - Height adjustment of the arm is carried out via powerful motorized drive and lifting spindle - Gearbox of the drill head running in an oil bath - Arm guideways hardened and precision ground - Gear wheels made of chrome-nickel steel, hardened and precision ground, resulting in quieter and smoother operation - Drill head and column can be clamped or released together or separately - Right-left rotation - Massive, precise drill table, generously dimensioned - Hardened and ground worktable with parallel T-slots - Machine light - Overload protection - Thick-walled cast column ensures smooth running and stability - LED lamp - Coolant system with coolant tank in the machine base - RD 6 / RD 7 - The column is hydraulically clamped

Condition: new, column diameter: 260messurements (LxWxH): 1725 x 745 x 2550weight approx.: 1800drilling performance: Stahl (S235JR) - 42Drilling table T-slot size: 19Drilling table T-slot spacing: 171Clamping table length: 635Clamping table height: 415connected load: 4Maximum spindle to drilling table distanc: 1270speed range: 37 - 1253Number of speed ranges: 12Machine FeaturesFunction & ApplicationVersatile application range, e.g. drilling, reaming, tapping Forward and reverse rotation Drive & ControlElectrically braked motor 24V DC electrics and 2-channel safety circuit according to DIN EN 12717 Clearly arranged control panel All axes are manually clamped Structure & DesignHeavy, solid, high-quality cast construction Thick-walled cast column for high smoothness and stability Rigid, high-strength boom construction Dodpfowrukzsx Ak Tsuu Large reach thanks to horizontally adjustable machine head Massive, precise drilling table with generous dimensions Hardened and ground clamping table with parallel T-slots Elaborately designed column swivel with optimized clamping for maximum stability and minimal clamping offset Drill head and column can be clamped or released together or separately Movement & MechanicsSmooth-running swivel and travel axes Boom height adjustment via powerful motor drive and lifting spindle Boom guideways hardened and precision-ground Drill head gearbox runs in oil bath Gear wheels made of hardened and precision-ground chrome-nickel steel, ensuring quiet and smooth operation Additional EquipmentMachine light LED lamp Overload protection Coolant system with integrated tank in the machine base Model VersionsRD 4 / RD 5

Condition: new, column diameter: 432messurements (LxWxH): 3050 x 1185 x 3050weight approx.: 5600drilling performance: Stahl (S235JR) - 70Clamping table length: 1000Clamping table height: 500connected load: 11speed range: 44 - 1023Number of speed ranges: 29 - 1575traverse path - x: 1185traverse path - y: 1000Versatile application range, e.g., drilling, reaming, threading Electrically braked motor 24V DC electrical system and 2-channel safety circuit according to DIN EN 12717 Heavy, massive, high-quality cast construction Wide reach thanks to horizontally adjustable machine head Dsdpfx Akjwruk Uj Teuu Clearly arranged control panel Smooth swivel and travel axes Elaborately designed column swivel with optimized clamping for maximum stability and minimal clamping offset Robust, torsion-resistant construction of the arm Height adjustment of the arm via powerful motorized drive and lifting spindle Drill head gearbox running in an oil bath Arm guideways hardened and precision ground Gear wheels made of chrome-nickel steel, hardened and precision ground, resulting in quieter and smoother operation Drill head and column can be clamped or released together or separately Right-left rotation Massive, precise drill table, generously dimensioned Hardened and ground worktable with parallel T-slots Machine light Overload protection Thick-walled cast column ensures smooth running and stability LED lamp Coolant system with coolant tank integrated in the machine base Model: RD 6 / RD 7 Column is hydraulically clamped

Condition: new, column diameter: 210messurements (LxWxH): 1260 x 700 x 2180weight approx.: 1120drilling performance: Stahl (S235JR) - 32column diameter: 210Drilling table T-slot size: 19Drilling table T-slot spacing: 171Clamping table length: 600Clamping table height: 380connected load: 3Maximum spindle to drilling table distanc: 1060speed range: 73 - 1247Number of speed ranges: 6 Dsdjwrukuepfx Ak Tsuu

Condition: excellent (used), Year of construction: 2012, bore capacity in steel (diameter) 62 mm arm length 350-1600 mm workpiece height max. 1250 mm distance spindle nose and table 350-1250 mm Boring depth max. 315 mm machine table 2400 x 1000 x 200 mm Turning speeds of the bor. spindle 38 - 2000 U / min spindle taper MT5 feed 0,06 - 1,00 mm/U engine output 4 kW stroke drive 1,5 kW oil pump 0,75 kW total power requirement 6 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2490 x 1050 x 2780 mm Steps of spindle speed: step-less Steps of spindle feed: 8 Speed of the arm up and down: 1.2 m/min Arm moving angle: ±180 degree Spindle moving distance of each dial revolution: 122 mm Max. spindle torque: 400 Nm Djdpfoyhq T Njx Ak Tjuu Max. spindle feed resistance: 16000 N

Condition: excellent (used), Surface of the base plate 880 x 700 mm Distance from spindle center to stand min./max. 220 / 620 mm Drill spindle: 13 mm passage Inner cone MK 3 Stroke 150 mm Spindle speeds 25 - 2560 rpm. Spindle feeds 0.06 - 0.12 - 0.25 mm/rev Duodpfx Asuigzpok Teu Motor power (1500/3000 rpm) 1.2 / 1.5 HP

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 (MK 4) • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting attachment • Two 18 mm T-slots each on rear and left of machine base • 3-axis digital readout • Machine lamp • Central lubrication • Table top machined all around • Drill guard • Coolant system Dimensions and Travels Tool holder MK 4 Column diameter mm 195 Table size mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column travel mm 450 Distance spindle nose - table top min 40 mm, max 710 mm Distance spindle nose - base plate min 840 mm, max 1510 mm Drilling radius min 540 mm, max 1590 mm Work table height mm 900 Machining Capacities Drilling capacity (solid) St 60 ⌀ 45 mm GG 22 ⌀ 55 mm Tapping St 60 M 36 GG 22 M 45 Dodox Uwpxopfx Ak Teuu Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range min⁻¹ 15 – 2,800 Torque Nm max. 250 Constant from min⁻¹ 15 – 200 Feed Drives Feed, stepless mm/rev 0.02 – 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with table 750 x 1200 mm kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic system diagram Electrical wiring diagram

Condition: used, Year of construction: 1978, machine/vehicle number: 78004, type of input current: three-phase, We are offering this used Csepel 12UH/1600 radial drilling machine, year of manufacture 1978. Model: 12UH/1600 Serial number: 78004 Power type: 3~ Dusdpsyh Uaqsfx Ak Teu Wiring diagram no.: 358000 If you have any questions or require further information, please feel free to send us a message or give us a call.

Year of construction: 1991, condition: used, machine/vehicle number: 9198590, Technical data: -Drilling capacity 60 mm -Throat depth 1600 mm -Spindle mount Mt 5 -Spindle hub 390 mm -Spindle speeds, 20 levels 20-2000 RPM -Right rotation -Feed, 12 steps 0.056 2.5 mm/U - drive 400 V / 12.8 kW -Clamp the boom and electromechanical drill unit -Was wrought bed - boring Quill - min approx. 900 mm -max 1600 mm -usable machine bed with 4 T-slots 950 x 1700 mm -Coolant system Duededhkhtjpfx Ak Teu -Cube table - space requirement approx. B 2600 x H 3000 x T 1000 mm - weight approx. 4500 kg

Year of construction: 1981, condition: used, machine/vehicle number: 77-8101, Lg-Nr. 01501, Technical data: - Drilling capacity in steel 28 mm - Thread cutting device - Drilling spindle holder MK 3 - Drilling spindle stroke 160 mm - Table dimension approx. 750 x 500 mm - projection up to approx. 620 mm - Vertical stroke of the boom 600 mm - column diameter 250 mm - spindle speeds in 12 switching steps 80 - 2800 rpm - 3 feeds 0,1 + 0,15 + 0,25 mm/rev Dsdpfjb Ennkex Ak Tsuu - drilling spindle drive 400 V / 5,5 kW - cooling device - space requirement approx. W 1100 x H 1550 - 2150 x D 950 mm - Weight approx. 1200 kg - Instruction manual

Condition: good (used), Year of construction: 1990, machine/vehicle number: 90650664, Offer 24402 Technical data: - Drilling capacity in steel 50 mm - Drill spindle holder MK 5 - Drill spindle stroke 315 mm - Projection min / max 350 / 1600 mm - Column diameter 350 mm - max. / min. distance - Spindle - base plate 350 - 1250 mm - Vertical stroke of the arm 580 mm - 16 spindle speeds 25 - 2000 rpm - Feed rates 0.04 - 3.2 m/rev - Drill spindle drive 400 V / 4 kW - Lift drive 1.5 kW - Column clamping 0.75 kW - Cube table - Coolant device Dodpfx Aeuzvzxjk Teuu - Space requirement approx. W 2490 x H 2645 x D 1060 mm - Weight approx. 3500 kg

Condition: used, Year of construction: 1984, machine/vehicle number: 84043, Order No. 20218 Technical Specifications: - Drilling capacity in wood: 40 mm - Drilling capacity in steel: 18 mm Duodpswf Iqnefx Ak Tou - Drill spindle mount: MT 2 - Spindle stroke: 120 mm - Drill spindle speeds continuously adjustable in steps: 60 - 2840 rpm - Max. distance between table and drill spindle: 600 mm - Boom/unit tiltable left and right by 45° each - Boom/unit pivotable left and right - Table size: 450 x 450 mm - Drive: 400 V / 0.33 / 0.55 kW - Space required: approx. W 500 x H 1870 x D 1200 mm - Weight: approx. 150 kg

Condition: good (used), Year of construction: 2018, machine/vehicle number: ZA-12080, Offer 25498 Technical Specifications: - Drilling capacity: 50 mm - Tapping unit up to: M 40 mm Djdpfoyf A A Rsx Ak Tsuu - Tool holder: MT 5 - Spindle stroke: 280 mm - Spindle speeds: 38 – 2,000 rpm - 6 feed rates: 0.08 – 0.83 mm/rev - Drive: 400 V / 5.5 kW - Throat depth min. / max.: 350 / 1,400 mm - Distance spindle to machined base plates min. / max.: 350 / 1,250 mm - Machined base plate with T-slots: W 1,650 x D 930 mm - Electric central clamping - Coolant system + lighting - Cube table - Required space approx.: W 2,300 x H 2,400 x D 1,050 mm - Weight approx.: 3,500 kg

Condition: good (used), Year of construction: 2017, machine/vehicle number: N 16601, Offer 25387 Technical Data: - Drilling capacity in steel: 60 mm - Drill spindle taper: MT 5 - Drill spindle stroke: 300 mm - Digital positioning display for stroke and position - Radius (throat): 1600 mm - Column diameter: 350 mm - Max. distance spindle – base plate: 350 – 1650 mm - Vertical travel of the arm: 1250 mm - Spindle speeds, stepless: 30 – 1500 rpm - Feeds, stepless: 1 – 600 mm/rev - Drive: 400 V / 8.9 kVA - 2 x cube tables Dsdpfx Aox Ei D Aek Touu - Coolant system - Required floor space approx.: W 2490 x H 2980 x D 1060 mm - Weight approx.: 3800 kg

Condition: good (used), Year of construction: 2013, machine/vehicle number: 157098, Offer 25404 Technical Data: - Drilling capacity in steel ST 60: 32 mm - Boring capacity (enlarging): 40 mm - Drill spindle taper: MT 4 - Drill spindle stroke: 250 mm - Arm reach min / max: 200 / 1000 mm - Arm vertical travel: 600 mm - Min / max distance spindle - base plate: approx. 550 - 1060 mm - Machined base plate clamping area: W 700 - 800 mm - Spindle speeds: 71 - 1800 rpm Dedpfxjxvzx Ds Ak Touu - 4 feeds: 0.13 - 0.54 mm/rev - Drill spindle drive: 400 V / 2.2 kW - Cube table - Coolant system - Space requirement approx.: W 750 x H 2350 x D 1750 mm - Weight approx.: 1300 kg

Condition: new, Year of construction: 2026, The RD700 VARIO is built on a solid column structure that ensures stability and vibration resistance. The radial arm enables precise head positioning from 300 to 700 mm relative to the column, while a quill stroke of 130 mm allows comfortable drilling in one setup. Key Components Spindle: Morse taper MT3 with drawbar, stepless speed control, maximum drilling capacity 32 mm. Feed system: Automatic spindle feed with three ranges, integrated with tapping mode. Main motor: 1.5 kW, 400 V, designed for continuous operation. Table and base plate: 250×250×250 mm cube table and 900×620 mm work plate with T-slots. Precision and Performance With stepless speed regulation and digital indicators, the RD700 VARIO guarantees high machining accuracy and repeatability. The automatic feed and tapping mode reduce cycle times, while the rigid construction minimises vibrations and extends tool life. Applications The CORMAK RD700 VARIO radial drilling machine is ideal for mechanical workshops, toolrooms, production plants, and maintenance departments. It is perfect for machining steel elements, welded structures, machine parts, and industrial components. Standard Equipment Cube table Base Drill chuck 3–16 mm / B18 Mandrel MT3 / B18 Reducing sleeve MK3 / MK2 Cooling system Tapping mode Digital spindle speed indicator Digital drilling depth indicator Adjustable height guard Basic tool set Safety guards User manual CE certification Technical Data *The price quoted is for the machine itself, excluding optional/additional equipment, installation, transport and training— please contact our consultant for more details. Parameter Value Maximum drilling capacity 32 mm Maximum tapping capacity M22 Dusdpfxoyccn Uj Ak Tju Spindle taper MK3 Minimum spindle speed 75 rpm Maximum spindle speed 2,500 rpm Speed change Stepless (75–438 / 438–2,500) Automatic feed range (3) 0.08 / 0.14 / 0.22 mm/rev Spindle–column distance 300–700 mm Spindle–table distance 0–430 mm Spindle–base plate distance 175–680 mm Vertical arm travel 505 mm Horizontal head travel 400 mm Quill stroke 130 mm Column diameter 150 mm Cube table size 250 × 250 × 250 mm Base plate work area 900 × 620 mm Motor power 1.5 kW Power supply 400 V Width 1,220 mm Depth 640 mm Height 1,750 mm Weight approx. 722 kg

Condition: new, Year of construction: 2026, A large and stable radial drilling machine with a large range of revolutions which ensures precise and fast machining. Machine features Large weight and sturdy design ensure stability and vibration-free operation Cube table provides adjustability and easy fixture of workpiece Control panel located at the front of the machine for improved convenience Ground column surface provides easy, precise arm travel Machine equipped with manual head and column arm limiter Large speed range for accurate and quick machining Technical data Maximum drilling diameter 35 mm (cast iron); 30 mm (steel) Distance from spindle to base 360–1300 mm Distance from spindle axis to column surface 260–1300 mm Spindle extension 200 mm Spindle taper MK4 Spindle speed ranges (6): 75, 130, 240, 380, 660, 1200 rpm Spindle feed ranges (3) 0.10; 0.16; 0.25 mm/turn Vertical arm travel speed 1.3 m/min Arm rotation 360° Main motor power 2.2 kW Lifting motor power 0.75 kW Worktable dimensions 510×380×305 mm Machine dimensions 800×1800×2150 mm Weight 1400 kg Default equipment B16 (3-16 mm) Drilling chuck B16/MK4 Drilling chuck mandrel MK4/MK3 reduction Wedge for taper removal Dujdpfx Akji D Da Ae Tsu The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.