Used Samag Cs 400X2500 for sale (2,251)

Condition: used, maximum load weight: 29,339 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2018, next inspection (TÜV): 01/2027, Equipment: ABS, Pallet box, fifth wheel load 12t, axle load 24t, unladen weight approx. 6.5t, distance from king pin to center of support device approx. 2270mm, pallet box for 32 Euro pallets, landing gears 2x12t, 3 axles each 9t, wheelbase 1310mm, BPW axles, 2x fire extinguishers and compartment, 1st axle liftable, Wabco braking system, 20mm pallet stop, 30mm floor plate, forklift axle load 7t, sliding roof, rear internal width 2480mm, load securing according to Daimler 9.5 EN16642XL/VDI2700/beverages. Nodpfx Aqjyt Udcjvswg

Condition: excellent (used), Here we offer you a climate chamber. Water-cooled Test chamber volume: 350 liters Internal chamber dimensions: Height 750 mm, Width 650 mm, Depth 720 mm External dimensions: Height 1800 mm, Width 850 mm, Depth 1640 mm Temperature working range: Temperature range: -70°C to +180°C Cooling rate: 3.0 K/min Heating rate: 5.0 K/min Climate working range: Temperature range: +10°C to +90°C Humidity range: +10% to 98% RH Dew point range: +5°C to 89.5°C Temperature deviation: ±0.1 - ±0.3 K over time Humidity deviation: ±1 - ±2% RH over time up to 90% RH max. ±1 - 3% RH over time above 90% RH Electrical connection: 400V +6-10%, 3/N, 50Hz Connected load: 13 kW Nsdpjygumkjfx Aqvswg Rated current: 25.5 A Refrigerant: R404A / R23 Weight: 650 kg Type: CS-70/350 For your safety as a buyer, please note the following information: The following steps are performed in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a trial run which is monitored with calibrated equipment. Condition: used Scope of delivery: (see photo) (Specifications, technical data and details may be subject to change. Errors excepted.) For any further questions, we are happy to assist you by phone.

Condition: excellent (used), Large flanging device Make Trumpf Type CS 20 CN 20 (28202) Nwsdpfx Aqju Nuycjveg suitable for Trumpf CS 20 and CN20 very good condition, very little used

Condition: ready for operation (used), Year of construction: 2019, operating hours: 15 h, machine/vehicle number: MP.DBDO-00198, Size 75 x 106 cm, non-stop function in feeder and delivery, integrated fine adjustment of the cutting plate, motorized die-cutting pressure adjustment, simple operating concept. The basic model is already equipped with all functions and equipment required to start production. Short makeready times, high flexibility thanks to an extended range of materials, accommodates smaller die-cutting tools. Machine number: MP.DBDO-00198, Impressions: 15 million. Nsdpfxjyhn Uqs Aqvswg

Condition: used, power: 105 kW (142.76 HP), Year of construction: 2022, operating hours: 1,211 h, maximum speed: 40 km/h, Operating hours: 1,211, First registration: 11.10.2022 Basic Equipment / Technical Data: - Max. lifting capacity: 4,200 kg - Max. lift height: 7,000 mm - Max. outreach: 3,800 mm - Length to implement carrier: 4,730 mm - Width: 2,310 mm - Height: 2,530 mm / 2,590 mm (with CS activated) - Total weight with forks: 8,170 kg - Total weight without forks: 8,000 kg Engine: - 4-cylinder Deutz TCD 3.6 - 3.6 l displacement, water-cooled - Power: 105 kW (143 HP) - 2,300 rpm - Hydraulic reversing fan - Stage V - Diesel particulate filter, oxidation catalyst and SCR-catalyst with AdBlue injection (DPF + DOC + SCR) Drive: - Hydrostatic travel drive - Pump: electronically controlled with variable output - Engine: variable displacement motor - EPD TOP incl. optional automatic rpm increase - Mineral-based hydraulic oil HVI 46 Transmission: - 2-speed, electrohydraulically controlled - Max speed: 1st / 2nd gear = 16 / 20 km/h, optional 40 km/h Cab: - Enclosed cab - Split door - 360° all-round visibility - V3611 GRAMMER air-suspended seat with lap safety belt - ROPS/FOPS certified - Heating - Front, roof, and rear wipers - Sunblind - 4x1 electronic joystick with capacitive release incl. direction control switch - CS = hydropneumatic cab suspension Boom: - 2-piece telescopic boom with electronic end position damping, Soft Stop - Implement carrier quick coupler system type "ZM2", hydraulically controlled from the cab Steering: - Hydraulic steering - 3 steering modes: All-wheel, front-wheel, crab steer - Permanent all-wheel drive - Axles: fixed front axle, oscillating rear axle Brakes: - Power-assisted disc brakes on all four drive shafts - Parking brake automatically engages when engine is off Chassis: - High-strength steel frame construction Hydraulics: - Load Sensing variable displacement pump - Work hydraulics flow: 150 l/min - Hydraulic fan flow: 46 l/min - Total flow: 196 l/min - Working pressure: 250 bar - Flow-sharing control block Nwsdpfx Astu Sztoqveg Electrics: - 12 V - 100 Ah battery - 120 A alternator Stabilization Control: - Simplified Merlo ASCS System (ASCS-light) with fully electronic stability control, audiovisual signals, attachment recognition, and overload cut-off Tires: - 460/70 R 24 Michelin XMCL Standard Equipment: - Power brakes - Hydraulic oil cooler - Rear plate for mounting a trailer hitch - Hydraulic reversing fan - Radio prep - Work lights on cab (2 front, 2 rear) - Preparation for auxiliary function at boom head - 2 hydraulic connections at boom head - Load guard on implement carrier - Road lighting - Automatic main battery switch - Electrical cable in boom - Audible reverse signal - Lift cylinder support for securing Optional Equipment: - EU approval as tractor/towing vehicle 40 km/h incl. self-locking trailer coupling, 30/32 mm pin, incl. connection for trailer lighting (for compact and medium models, height-adjustable version strongly recommended) - Air conditioning - Boom suspension (B.S.S.) - LED beacon on cab roof (approval subject to ...

Condition: like new (used), Year of construction: 2026, functionality: fully functional, cooling capacity: 327 kW (444.60 HP), type of cooling: air, aircooled Chiller GALETTI test machine Cooling cap. 327 KW (100 refr.tons), 2 circuits with each 2 scroll compressors, Plate evaporator, with integrated pump and tank R 410a Nwedpfx Aeyuti Tjqvog tested,ready for operation

Condition: like new (used), Year of construction: 2023, operating hours: 500 h, functionality: fully functional, FOR SALE: Dubuit Far East CS-1 Automatic UV Screen Printing Machine 2-Colour Double Head OVERVIEW Nedpfx Aqoyw Sa Dsvjwg An exceptional opportunity to acquire a near-new, fully optioned Dubuit Far East CS-1 2023 automatic UV screen printing machine, commissioned in the UK in 2024 barely used since installation. The machine is in full working order and available for inspection at our facility. New replacement cost for this specification $217,000. New units carry a 6+ month lead time from OEM. This machine is available for immediate collection or delivery. MACHINE: DUBUIT FAR EAST CS-1 The CS-1 is a high-speed, compact automatic screen printing machine designed for cylindrical containers. It uses LED UV technology for fast curing, strong colour results, and precise registration. All motion is servo-driven (Schneider Electric PLC and motors) ensuring consistent, repeatable print quality. FACTORY-FITTED OPTIONS (as invoiced): - Double printing head with additional servo and ball screw (2-colour capability) - Registration by sensor under printing position - Pre-registration station with additional servo and colour sensor - Counterpoint under printing - Peristaltic ink pump per head - Antistatic system including power supply - Extra set of jigs - Pick and place infeed for standing bottles - Turntable - Increased stroke to 230mm per colour (upgraded from standard 190mm) - VPN for remote access TECHNICAL SPECIFICATIONS: - Object type: Cylindrical containers - Diameter range: Ø 10mm to 88mm (mandrel) - Object height: 20mm to 210mm (modified) - Maximum print area: 200mm - Maximum print stroke: 270mm - Speed: Up to 4,000 pcs/hour (1 colour); ~1,900 pcs/hour (2 colour with pre-registration) - UV system: LED UV, 80mm long, 16W/cm - Carousel: Vertical, 9-mandrel - Drive: Full servo — Schneider Electric PLC and servo motors throughout - Control: Touchscreen HMI with recipe storage, object counter, stroke/speed settings, troubleshooting guide - Remote access: VPN capability included - Electrical: 5 kW/H (print module) - Air: 6 bar main pressure, 3 NM³ print module - Machine footprint: 1.4m (L) x 1.45m (D) x 1.95m (H) - Net weight: approx. 2,070 kg ALSO INCLUDED: - Dubuit Far East Big Unscrambler Model 712 (1,500mm diameter disk type) - Full original operator manuals - All original factory documentation including technical drawings and electrical wiring diagrams CONDITION: Fully functional. Barely used since UK delivery in 2024. Available for powered demonstration by prior arrangement. LOCATION: Oxford, United Kingdom COLLECTION: Buyer collects preferred. UK delivery can be arranged. International shipping available — please enquire.

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 303 CS 2816, total width: 2,000 mm, total length: 8,000 mm, total height: 2,000 mm, Equipment: compressor, Collating Machine Theisen & Bonitz tb sprint 303 CS – 8 Stations – with Stitching Unit – Year of Manufacture 1999 For sale is a Theisen & Bonitz tb sprint 303 CS collating machine featuring 8 collating stations and an integrated stitching unit. This machine is ideally suited for producing brochures, booklets, catalogues, and multi-page print products, and is a proven solution for print shops and finishing operations. The robust construction of the tb Sprint series ensures reliable and long-lasting performance. Thanks to its compact design and user-friendly operation, the machine is suitable for smaller production lines as well as for integration into existing setups. Technical Data Manufacturer: Theisen & Bonitz Model: tb sprint 303 CS Year of Manufacture: 1999 Machine No.: 303 CS 2816 Number of Stations: 8 Equipment: integrated stitching unit Application: brochure and booklet production Condition Used, commensurate with age. Scope of Delivery Nwodeyucwgjpfx Aqvsg Machine as described and shown in the photos. Inspection / Availability Inspection possible by appointment. Immediately available – subject to prior sale.

Year of construction: 2018, condition: like new (used), The temperature control unit from technotrans is for sale and comes with a variety of extras. Warranty: 6 months with an operating time of 22 hours. Medium: Water with indirect cooling (heat exchanger) Heating capacity: 9 kW Cooling capacity: 42 kW Operating temperature: max 95°C Njdeyucb Ejpfx Aqvowg Flow rate: 60 l/min Max pressure: 6 bar RJ45 port for remote access Interface: RS 485, 20mA CL Touchscreen g and much more.

Condition: good (used), The scope of delivery includes: 01x Sigma profile, used material colour: galvanized total length: approx. 850 - 1.050 mm Profile: CS300 The Sigma profiles were cut on one or both sides! There are different lengths and material thicknesses available, which are not sorted out. General information about the article: This item is offered for pickup only. A beyond that desired transport Nodpfx Aqehktdlevswg or a dispatch of this article is connected with additional costs, which can be inquired separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: as good as new (ex-display), Technical data for the CS Sigma profile: Manufacturer: SSI Schäfer Type designation: CS 300-2.0 The scope of delivery includes: 01x CS Sigma profile, second choice Material color: sendzimir galvanized Total length: approx. 2,294 mm CS Sigma profile: approx. 300x75x15 mm Material thickness: approx. 2.00 mm Weight / running meter: approx. 6.84 kg Weight / pc.: approx. 15.69 kg Remark: The profiles are offered as II. choice and may show have slight soiling ( dust ), which can be easily Nwodpfx Aoqx Nr Eeqvjg easy to remove. General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), Technical data for the CS Sigma profile: Nwjdpfxjibvnro Aqvog Manufacturer: SSI Schäfer Type designation: CS 300-4.0 Included in delivery: 01x CS Sigma profile, II. choice Material color: sendzimir galvanized Total length: approx. 3.800 mm CS Sigma profile: approx. 300x75x15 mm material thickness: approx. 4,00 mm

Condition: used, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 4,500 rpm, Equipment: rotational speed infinitely variable, X-AXIS STROKE 6000 MM Y-AXIS STROKE 1800 MM AXIS STROKE 1000 MM 7300 X 1090 X H 900 MM BENCH ISO 50 SPINDLE NOSE CONNECTION SPINDLE SPEED 0 - 4500 RPM Nsdpfx Aqsv H D Exsvjwg 2.5 ° X 2.5 ° AUTOMATIC INDEX HEAD CNC SELCA 3045 PD EXTERNAL AND INTERNAL HIGH PRESSURE COOLING TOOL CHANGE 60 PLACES NR 01 CNC-MANAGED DIVIDING DEVICE

Year of construction: 2016, operating hours: 0 h, condition: as good as new (ex-display), machine/vehicle number: 09144PER2A, Refrigerating scroll compressor Trane CSHC 093R0A0S Technical data: ♦ Positive displacement refrigerant compressor ♦ Scroll compressor ♦ Hermetic compressor, internal motor ♦ Compressor model & development sequence ♦ 3500 rpm vertical welded steel shell Designates size - nominal tons = 9.3 tons Voltage designator 208/230-60-3 Number of cylinders that unload zero -no unloading Design sequence (alpha). Factory assigned prints on the nameplate. Unloader control and method of unloading - no unloading; Basic compressor variation: 1 Braze copper-clad refrigerant connections 2 Rotalock oil equalizer fitting with threaded cap The principles of operation: The suction gas is drawn into the compressor. The gas then passes through the gap between the rotor and stator, cooling the motor. The gas then enters the intake chamber, which encircles the scrolls. The oil in the suction gas is separated by changing directions and impinging on surfaces within the compressor and then draining back to the oil sump. Finally, the suction gas is drawn into the scroll assembly where it is compressed and discharged into the dome of the compressor. The dome of this compressor acts as a hot gas muffler which dampens the pulsations before the gas enters the discharge line. How the Scroll Compressor Trane Works Nwsdpfx Aofm A Dmjqvog General A 3-D compressor has two scrolls. The top scroll is fixed and the bottom scroll orbits. Each scroll has walls in a spiral shape that intermesh. Inlet - First Orbit As the bottom scroll orbits, two refrigerant gas pockets are formed and enclosed. Compression - Second Orbit The refrigerant gas is compressed as the volume is reduced closer to the centre of the scroll. Discharge - Third Orbit The gas is compressed further and discharged through a small port in the centre of the fixed scroll. Price: 1.000 Euro + TVA, FCA, Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Wood chipper Bruks 803 CS After complete renovation Manufacturer: Bruks Model: 803 CS Length 2.90m Width 1.15m Height 1.15m Motor 50kw Chips capacity m'/h - chipper only 30-60 - in chipper package 20-40 Drum diameter, mm 800 Number of knives, standard 4 Inlet opening BXH, mm 540X400 Net weight, kg 2500 Nwodpfxsxqzm Re Aqvog Rotor speed, rpm 620 Swivel mass GD', kpm' 400 Fan power, kW 11

Condition: like new (used), Year of construction: 2021, functionality: fully functional, operating hours: 150 h, power: 90 kW (122.37 HP), For sale is a like-new CS 600 multi-blade circular saw from Serra. The saw has operated for only 150 hours. Included in the price: 4 sets of spacer rings, 3 sets of saw blades, infeed table (5m), and outfeed table (5m). Technical data: Minimum cutting length: 880 mm. Cutting width up to 600 mm. Cutting height up to 160 mm. Saw blade diameter up to 500 mm. 90 kW motor. Nwsdpoynbtysfx Aqvog

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6530x1150x2980 mm Weight 900 kg Total power requirement 3 kw Nedpsvz Eg Hofx Aqvswg

Condition: new, maximum load weight: 36,461 kg, overall weight: 49,500 kg, axle configuration: 3 axles, total width: 2,480 mm, total height: 860 mm, Year of construction: 2026, Technical Description Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). 30 mm thick hardwood flooring. Loading Platform: Loading platform behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel of approx. 1,000 mm x 8°. 6 pairs of outward-folding lashing rings (LC 5,000 daN). 2 pairs of outward-folding lashing rings (LC 10,000 daN). 1 pair of inward-folding lashing rings on the front central beam (LC 10,000 daN). Grating flooring C40/4 (point load 2.3 t on an area of 20 x 20 cm), over the axles with chequer plate covering. Two-Part Steel Ramps: One pair of galvanized, two-part steel ramps approx. 3,185 + 1,420 x 1,250 mm with grating flooring C40/5 (point load 8 t on an area of 20 x 20 cm). Ramp with hydraulically foldable ramp sections and hydraulic lifting system. Maximum load per pair: 40,000 kg In accordance with regulation 1230/2012/EU, ramps less than 300 mm in length do not count towards the vehicle length of 16,500 mm in driving position. Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load). Tyres: Tyres 235/75 R17.5 3PMSF as per manufacturer’s choice. TPMS: TPMS tyre pressure monitoring system as per ECE R 141. Data transmission to the tractor unit via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to receive and display these data. Axles: BPW axles and suspension, 2 fixed axles, 1 self-steering trailing axle. Technical axle load: 12,000 kg Electromagnetic reverse lock, activated via reverse gear and manually. Air suspension with raise and lower valve. Axle tools included. Brake System: WABCO braking system compliant with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit. Electrical System: Electrical system compliant with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3). All LED side marker lights flash with the indicator. ASPÖCK-UNIBOX on the front connector strip with 24N, 24S & 15-pin sockets. Connection according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel Structure: Steel frame made of high-strength fine-grain steels. Steel grades: – S355J2+N/S355MC (yield strength 355 MPa) – S690QL/S700MC (yield strength 690 MPa) Tarp Structure: Tarp structure approx. 3,960 mm – Galvanized front wall with a tensioning mechanism for the sliding curtains. – “EDSCHA” roof, forward-sliding on aluminum roof rail profiles (bolted to front and rear walls). – 3 pairs of movable stanchions on the loading platform. – Body can be hydraulically widened at the rear by approx. 750 mm to the left and right. – Sliding roof with upward-swinging portal carrier. – Sliding tarp with 700 mm length reserve and tensioning straps at approx. 600 mm intervals. Height to top edge of structure approx. 3,960 mm (loaded). – Driving with open sliding roof is not permitted and will cause damage to the tarp. Painting: Entire steel structure is automatically shot-blasted after welding using a blasting wheel system. Second blasting treatment with corundum for optimal coating adhesion. Full metallizing of the entire chassis with ZINACOR 850 (85% zinc / 15% aluminum) for best corrosion protection. Top coat with 2 layers of 2K finish, single-color in a shade of your choice according to the RAL 841GL standard. Rear section metallized and coated in RAL 9010 (pure white). No metallic paint. Nsdpfxew Dl Hws Aqvowg

Condition: new, maximum load weight: 40,017 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, Year of construction: 2026, Technical Description Gooseneck: Gooseneck with rear chamfer of approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). 30 mm hardwood flooring. Loading Platform: 5 pairs of folding external lashing rings (LC 5,000 daN). Nwsdpfjw Dl Hqex Aqvjg 3 pairs of folding external lashing rings (LC 10,000 daN). 1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN). Approx. 48 mm thick hardwood flooring, checker plate covering over the axles. Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load). Tyres: 205/65 R17.5 tyres as per manufacturer's specification. TPMS: TPMS tyre pressure monitoring system compliant with ECE R 141. Data transmission to the tractor unit via the standardised EBS interface according to ISO 11992. To ensure correct display, the tractor unit must be capable of transmitting and displaying this data. Axles: BPW axles, two fixed axles, two self-steering axles, air-suspended, with drum brake, with lifting/lowering function. The self-steering axles can be locked electronically via reverse gear or manually using an electromagnet. Axle tools included. Brake System: WABCO brake system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit. Electrical System: Electrical system according to EU regulations, 24 volt LED lighting by ASPÖCK-NORDIK (ASS3). All LED side marker lamps flash with the turn indicators. ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets. Connections conform to ISO standards: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel Construction: Steel structure made from high-strength fine-grained steels. Steel grades: – S355J2+N/S355MC (yield strength 355 MPa) – S690QL/S700MC (yield strength 690 MPa) Paintwork: The entire steel structure is automatically shot-blasted with a turbine system after welding. A second abrasive blasting treatment with corundum ensures optimal adhesion of the coating system. HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for superior corrosion protection. Final coating with 2 coats of 2K topcoat, single-colour in a shade of your choice according to the RAL 841GL system. Rear section metallized and painted in RAL 9010 (pure white). Metallic paint not possible. Paint system tested in salt spray test according to ISO 9227-NSS. Cavities sealed with special wax. Options included: 2" kingpin One galvanized steel bulkhead. Yellow-red air couplings on the galvanized front connection panel. 2 wheel chocks with holders on the bulkhead. Fixture at the rear of the gooseneck for ALU approach ramps. Further options upon request.

Year of construction: 1999, condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 1 to 30 mm Nodpfx Aqjdi Sl Iovjwg -Load capacity: 2000 kg -Number: 1x terminal available -Weight: 10 kg

Condition: new, Bernardo manual metal circular saw CS 315 H Technical specifications Saw blade diameter of 315 x 40 mm Speed 19 / 38 U/min Vice opened Max 150 mm Working height 920 mm S1 motor power output 100% 0,75 / 1,5 kW Motor power S6 40% 1.0 / 2,1 kW Voltage 400 V Machine dimensions (W x D x H) 530 x 1000 x 1740 mm Weight 235 kg Round solid material 90°: 80 mm 45°: 70 mm Round tube 90°: 80 mm 45°: 70 mm Square shaped tube 90°: 80 x 80 mm 45: 70 x 70 mm Solid material square 90°: 80 x 80 mm 45: 70 x 70 mm Square tube rectangular 90°: 90 x 80 mm 45: 80 x 70 mm Rectangular solid material 90°: 90 x 80 mm 45: 80 x 70 mm Properties Gear head for slot working left and right 90 ° swiveling Removable coolant tank in the robust base integriergt Gearbox with hardened and ground Auger and bronze worm wheel Security guard opens automatically when the cutting Precise, 4 guided, self-centering double clamping vise Ergonomically shaped handle with push button for fatigue-free cutting Low speed of the saw blade (19 / 38 RPM) optimal for cutting of full materials Reduction gear low noise running in an oil bath Nwsdped Id Ugofx Aqveg Scope of delivery Coolant system with filter Self centering Vice Base

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 487 h, load capacity: 1,800 kg, lifting height: 2,500 mm, fuel type: electric, mast type: simplex, construction height: 1,875 mm, drive type: Elektro, Pedestrian stacker Nedpfx Ajyavyfjqvswg Mast type: Standard Condition: Ready for use and fully operational Technical condition: Very good Battery voltage: 24V Description: FEM2 carriage

Condition: excellent (used), Year of construction: 2016, Professional fully automatic packaging system from a renowned European manufacturer, consisting of three components: infeed belt, fully automatic L-sealer, and shrink tunnel. The machines can be operated together as a system or individually. Suitable, for example, for packaging food products, technical goods, printed and paper products, household items and toys, as well as textiles. Infeed Belt GH 1000 / 400: - Infinitely variable speed adjustment - Automatic/manual operation selectable - Length approx. 1 m - Usable width approx. 400 mm - Adjustable side guides - Height adjustable via machine feet Fully automatic L-sealer FP 6000 CS - The L-sealer is equipped with multiple monitoring sensors, light barriers or photocells for controlling the automatic process as well as mechanically adjustable product guides. User-friendly control panel with a wide range of functions and settings, including automatic and setup operation, memory slots for different packaging formats, piece counter, packaging output calculation, multipack functions, communication functions, password levels and energy-saving features. - Motorized adjustment of the sealing frame and forming angle - Packaging capacity: Up to approx. 50 packs/minute - Maximum product length approx. 600 mm (sealing bar length of the L-sealer approx. 650 mm) - Maximum product width approx. 400 mm (crossbar length of the L-sealer approx. 500 mm) - Maximum product height approx. 200 mm (opening of the L-sealer approx. 300 mm) - Maximum film roll length approx. 600 mm. The film can be perforated using four adjustable needle rings. - Height adjustable via machine feet Shrink Tunnel Smipack T 450: - Up to 10 programs can be stored - Tunnel opening approx. 450 x 250 mm - Temperature adjustable from 85 to 200 °C - Conveyor speed adjustable from 2.8 to 9.4 m / min - The hot air flows can be adjusted via several baffle plates at the tunnel entry and exit - The machine can be moved or fixed in place using lockable castors - Adjustable outfeed roller conveyor with protective cover (removable), approx. 1 m long and 400 mm wide Comprehensive documentation such as operating manuals, wiring diagrams, and spare parts lists available. Nwjdpfjylwpxex Aqvjg Only approximately 3,800 packs have been produced with this line, so it is in an almost unused condition.

Condition: good (used), functionality: fully functional, machine/vehicle number: Nr.72.092.010, spindle bore: 12 mm, Iemca CS112 No.72.092.010 Iemca Bar Feeder and Motor Round bars Ø 1 - 12.7 mm (3/64" - 1/2") Supplied with guide sets for 4 mm and 12 mm and with 2 motors for Tornos M4 For 3 m bar lengths ON CLEARANCE SALE REDUCED PRICE! Hexagonal bars Ø 1.3 - 11 mm (3/64" - 7/16") Capacity: 28 bars Ø 7.5 mm - 16 bars Ø 12.7 mm Min. bar change time: 26 sec. (with 3200 mm bars) (mod. 32) Feed speed: 1000 mm/sec. Return speed: 1600 mm/sec. Supply voltage: 230/400 volts Nwodpfx Aqjrn I Dfsvsg Installed power: 1.8 kW

Condition: good (used), geared motor, electric motor -Speed: 16.2 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Number: 3x geared motors available Price: per piece -Weight: 21 kg Nsdpfx Aqsb A Hhcevswg