Used Schauenburg Oscillating Dewaterer for sale (651)

Condition: used, SincoTec Type: Exciting Mot Resonance testing system POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance testing system is designed as a two-mass shaker. It consists of an oscillating head, which is excited by an unbalanced motor driven by a frequency-controlled asynchronous motor. The oscillating head is located in the upper part of the machine and generates the dynamic amplitude. The oscillating head is supported by pre-tensioned coil spring supports on the upper crossbeam and is guided centrally. The central load drive is located in the lower part of the machine and applies the static preload with the aid of a gear motor via a spindle drive. The test chamber is located above the clamping table and is bounded upwards by the adjustable crossbeam. The EXCITING MOT control system controls the testing system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated steel sheet and meets protection class IP 50 according to EN 60529. Technical data: General data of the testing system: Overall height of the testing system 1840 to 2240 mm Height of the machine table 1030 mm Width of the testing system 800 mm Depth of the testing system 1500 mm Height of the test chamber max. 600 mm (without force sensor) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum stroke ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. Class 1 (according to DIN EN 10002-3) Weight of the testing system approx. 1880 kg Max. weight of the clamping device 150 kg General data of the control cabinet: Overall height of the control cabinet 1900 mm Height of the table top 1080 mm Width of the control cabinet 650 mm Depth of the control cabinet 700 mm Weight of the control cabinet 152 kg Color RAL 9006 (white aluminum), table top Midnight Conditions for the installation site: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Dujdpfx Amjzii Aws Tew Floor load-bearing capacity 170 N/cm² Voltage supply 400 V / 50 Hz (clockwise rotating field) Connection plug CEE socket, s-pole, 16 A Fuse 16 A Connection and environmental conditions Mains conditions: Voltage 400 V three-phase current with PE conductor and protective earth, clockwise rotating field Voltage fluctuations < ± 10% Short-time voltage dips < 20 ms Limits for permanent disturbances Radio interference level A according to VDE0871 Frequency 50 Hz ± 1% Protective earth Grounding resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet Used to test water ingress into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system reduces water consumption to a minimum. Duedpfezii Akox Am Tew Features - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swivel and interchangeable nozzle holders - Adjustable and measurable water flow rate - Test duration control Data for mechanical load: - Max. load with test specimens (evenly distributed): Permissible total weight for specimen carrier: 25 kg - Spray radius: 200 mm / 400 mm Data for IP protection class tests - Oscillation speed approx. 60°/s - Oscillation angle IPX3 approx. ±60° - Oscillation angle IPX4 approx. ±180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Further questions can be answered by phone.

Condition: used, Year of construction: 2021, Exhibition unit (little used) Unit for cutting soft materials such as honeycomb cores, acoustic elements and fabrics using oscillating movements Processing options: Cutting straight or radial cutouts Typical areas of application: • Textiles: Cutting fabrics or textiles (e.g. leather, felt, etc.) • Cutting honeycomb cores for doors, staircase construction, exhibition stand construction, caravan construction • Acoustic elements: Cutting polyester, foam or other sound-absorbing materials • Aviation, boat building, aerospace: Cutting honeycomb cores Technical specifications Max. input speed: 6,000 min-1 Max. output speed: 9,000 min-1 Gear ratio: 1:1.48 Max. torque: 8 Nm Permissible operating temperature: max. 85°C Position of the torque arm to the tool: 360° Processing angle: 0° Number of tool outputs: 1 / fixed Lubrication: Grease / lifetime grease filling Amplitude: 4 mm Frequency: 150 Hz Storage location: Garbsen Dusdevvi Iqepfx Am Tsw

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine – technical specifications: A possible screwed version for spindle sleeve clamping. Something similar to the ProLoc device is used. Storage location: Nattheim. Dedpfxewhqpre Am Tsuw

Condition: used, Year of construction: 2022, Oscillating cylinder sanding machine, technical specifications: A possible screw variant for spindle sleeve clamping. Something similar to a ProLoc device is used. Storage location: Nattheim Duodjwhqpljpfx Am Tjw

Condition: repair required (used), Haake HAAKE RheoStress 6000 Rotational Rheometer – Thermo Scientific Item description: For sale is a HAAKE RheoStress 6000 rotational rheometer from Thermo Scientific – a highly precise measuring instrument for the rheological characterization of various materials. Ideally suited for use in research, development or quality control. However, the device is not operational as the air bearing is defective. Technical specifications: Angular resolution: 12 nrad (internal resolution) Speed range (CR mode): 10⁻⁵ / 10⁻⁷ to 1500 / 4500 min⁻¹ Speed range (CS mode): 10⁻⁷ to 1500 min⁻¹ Dodpfxozia Iwo Am Touw Torque range: max. 0.20 Nm / min. 200 nNm (rotation & oscillation) Frequency range (oscillation): 10⁻⁵ to 100 Hz Normal force: 0.01 – 50 N (resolution: 0.001 N) Temperature range: –60 °C to +400 °C (with suitable thermostat) Dimensions (W × D × H): 400 × 400 × 780 mm Weight: approx. 42 kg Special features: Very high measurement accuracy due to low inertia Precise lifting device (0.5 µm setting accuracy) Modularly expandable (High Shear, RheoAdaptive Control) Compatible with various thermostats Scope of delivery: HAAKE RheoStress 6000 base unit Power cable Software Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), functionality: fully functional, SCM Sandya 30 RT wide belt sander Working width: 1100mm Working height: 3-160mm Number of sanding heads: 2 Steel calibration roller Sanding head with a segmented platen divided into 20 sections Motor power: 1.15 kW 2.11 kW Optical oscillation Dust extraction system on the second sanding head Spare segmented platen Belt dimensions: 2620x1115mm Dodpszdgltsfx Am Touw Feed speed adjustable by means of a variator Machine dimensions: 180x300x230cm (H) Machine weight: 2700kg

Condition: excellent (used), CATALOG NUMBER: 6145 Dedpfx Aszfpq Hom Touw TECHNICAL DATA - Maximum workpiece width: 1100 mm - Maximum workpiece height: 140 mm 3 units: 1) Calibrating grooved rubber roller – 15 kW 2) Calibrating grooved rubber roller – 11 kW 3) Calibrating grooved rubber roller – 11 kW From above: - Sliding metal roller - Sliding rubber roller - Unit - 2 sliding rubber rollers - Unit - 2 sliding rubber rollers - Unit - Sliding rubber roller From below: - Infeed table: 3600 x 1000 mm - Feed speed regulated via inverter 0.25 kW - Traction belt - 3 ejection sliding rubber rollers - Pneumatic belt oscillation with photocell control - Belt blowing - Electric table elevation adjustment – lifting motor 0.75 kW - Smooth feed speed control – feed motor 2.2 kW - With vacuum pump – pump motor 4 kW - Extraction port diameter: 110 mm, 80 mm - Operating pressure: 6-8 bar - Extraction connector diameters: 3×150 mm, 3×200 mm - Overall machine dimensions (LxWxH): 3400 x 2300 x 2800 mm - Feeder dimensions (LxWxH): 3000 x 1300 x 900 mm - Pump dimensions (LxWxH): 600 x 950 x 940 mm - Weight: approx. 5000 kg Net price: 39,900 PLN Net price: 9,500 EUR (depending on exchange rate of 4.2 EUR) (Prices may vary with greater fluctuations)

Condition: excellent (used), CATALOG NUMBER 7854 Technical data: - belt length: 2515x152 mm - belt width: 150 mm - oscillation - vertical oscillation movement - sanding length: 790 mm - table size: 840x300 mm - worktable for contoured elements: 300x250 mm - worktable adjustment: 80 mm - motor: 2.2 kW - sanding unit adjustable angle: 90-45 degrees - sanding head adjustment: 0-45 degrees Dujdpfozfpnrsx Am Tew - extraction port diameter: 100 mm - dimensions (length/width/height): 1450/600/1230 mm - weight: 138 kg ADVANTAGES – with oscillation – with shoe – suitable for contour and straight sanding – unit can operate vertically and horizontally – unpainted – used sander, very good condition Net price: 3,900 PLN Net price: 930 EUR (depending on the 4.2 EUR rate) (Prices may change with higher fluctuations)

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Bacci Lignum horizontal drilling machine with oscillation, pneumatic table, adjustable Duedpfx Aewyghbom Tjw

Condition: good (used), Year of construction: 2005, sheet width 2560 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 2600 mm down holder 15 Stück no. of strokes max. 24 Hub/min oil volume 120 ltr. cutting angle 1.6 ° back stop - adjustable 750 mm Control PRG 911-1 Number of working hours ca. 370 h total power requirement 11.0 kW Dsdpfxezh N U Rj Am Touw weight 4700 kg range L-W-H 3190 x 2100 x 1560 mm with only approx. 370 operating hours (!) Features: - Robust electro-hydraulic oscillating shear - Digital position display for electric backgauge * Backgauge travel X = 750 mm * Backgauge with backlash-free ball screw * Travel speed 100 mm/sec - 1x sturdy side stop * With T-slot, flip-stop, and millimeter scale - 2x sturdy front support arms - Electric cutting length limiter * Cutting length limiter to increase strokes per minute - Manual cutting gap adjustment * centrally operated on the left side stand - front support plates - front finger/interference guard - jog mode with push buttons on the control panel - protective guard = safety device behind the machine - operating instructions (PDF)

Condition: excellent (used), Year of construction: 1994, Device description: grinding top/bottom working width 200mm electric adjustment of the upper unit star/delta start-up installed power 14kW pneumatic belt tensioning belt oscillation working height up to 150mm Djdpfowyb Ntjx Am Teuw

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, CNC PRECISION AUTOMATIC LATHE • 32mm capacity chucker convertible Swissturn • 3-path control with pinch turning and milling capability • Main side gang with 7 turning tools, 7 driven tools (3 modular), and 5 ID tool positions • Sub side Y-axis with driven tool positions (4 standard), up to 34 total tools available • Oscillation cutting capability • Direct drive guide bushing tsugamiamerica.com • FANUC 31i-B CNC control Duodpfx Amoy Aygco Tow

Condition: excellent (used), Year of construction: 2022, Maximum machining capacity: 20 mm (Swiss-type / sliding headstock) 8 backworking live tools (4 standard) Direct drive rotary guide bushing High-rigidity machine bed for improved stability and accuracy Dedpfjy A Epiex Am Teuw Oscillation cutting capability Advanced direct drive guide bushing system CNC control system: FANUC 32i-B

Condition: used, functionality: fully functional, On offer: SCM Sanyda UNO 900 R+RT wide belt sanding machine. The machine is used, has undergone technical inspection, is fully functional, and ready for operation. Before purchase, it can be started and thoroughly inspected at our company's premises. Specifications: • Manufacturer: SCM • Model: Sanyda UNO 900 R+RT • Working width: 900 mm • Maximum working height: 150 mm • Number of sanding units: 2 • First unit: steel roller with a diameter of 140 mm • Second unit, combined type: soft rubber roller with a diameter of 140 mm and a sanding pad • Main motor power: 7.5 kW • Motor start in star-delta configuration • 2 conveyor belt feed speeds • Analog indicator for set sanding thickness • Thickness gauge for the workpiece with automatic adjustment of the worktable height • Pneumatic oscillation of the abrasive belt • Option to convert the oscillation system to optical control for an additional fee • Abrasive belt dimensions: 1525 × 930 mm • Number of dust extraction ports: 2 x 160 mm • Overall dimensions: 167 × 145 × 170 cm (L × W × H) Additional information: • Good technical condition • Machine preserved in its original condition • Photos show the actual condition of the machine offered • Free machine operation training at our company's premises • The price stated in the auction does not include VAT Duedpfx Amjzhppno Tjw Financing and transport: • We arrange transport using the MDD fleet, courier companies, or external carriers • We assist in obtaining leasing or loan financing • Transport costs are determined individually

Condition: used, functionality: fully functional, Available: STROMAB PS 45/F oscillating band saw The machine is used, has undergone a technical inspection, is fully functional, and ready for operation. Before purchase, it can be started and thoroughly inspected at our company's premises. Dsdpfxszhpdro Am Tsuw Specifications: • Manufacturer: STROMAB • Model: PS 45/F • Engine power: 4.0 kW • Blade diameter: 450 mm • Arbor diameter: 35 mm • Rotational speed: 3000 rpm • Maximum cutting width: 450 mm • Maximum cutting height: 145 mm • 2 additional extension tables, each 2000 mm long • Table width: 500 mm • Dust extraction port diameters: 100 and 70 mm • Body weight: approximately 250 kg • Overall dimensions when assembled: 405 × 123 × 165 cm (length × width × height) Additional information: • Very good technical condition • Machine preserved in its original condition • The photos show the actual condition of the machine being offered • Free machine operation training at our company's premises • The price stated in the auction does not include VAT Financing and transport: • We arrange transport using the MDD fleet, courier companies, or external carriers • We assist in obtaining leasing or loan financing • Transport costs are determined individually

Condition: excellent (used), Year of construction: 2011, working width 950mm Dedpfx Amow Afd Hs Touw 1 kombi unit pneumatic segmented pad two feeding speed electric table regulation pneumatic oscillation motor power 11kW year of production 2011

Condition: used, Finishing unit, buffing unit, modular unit kit, format processing unit, double-end profiler, edge processing machine, after the scraper for edge processing machine -HOMAG finishing unit for cleaning agent application with buffing device for disposal of glue residue on PVC edges -with oscillation -Swiveling -side: adjustable -height: adjustable Dedpfxjb Sc Sxs Am Tsuw -Number: 4x units available -Price: per piece -Dimensions: 580/350/H460 mm -Weight: 28 kg

Condition: used, Finishing unit, buffing unit, modular unit kit, format processing unit, double-end profiler, edge processing machine, after the scraper for edge processing machine -without: drive motors -HOMAG finishing unit: for cleaning agent application with buffing device for disposal of glue residue on PVC edges -with: oscillation -Swiveling -Number: 3x units available Djdpfx Aecghhfjm Touw -Price: per piece -Dimensions: 400/160/H225 mm -Weight: 5.7 kg

Condition: used, Finishing unit, buffing unit, modular unit kit, format processing unit, double-end profiler, edge processing machine, after the scraper for edge processing machine -HOMAG finishing unit for cleaning agent application with buffing device for disposal of glue residue on PVC edges -with oscillation -Swiveling -laterally adjustable -height adjustable -Number: 3x units available -Price: per piece Duedpfxeb Uhk Rs Am Tjw -Dimensions: 350/600/H500 mm -Weight: 37 kg

Condition: good (used), Year of construction: 1979, Round vibrator, vibratory grinding system, vibratory grinding machine, vibratory grinding round vibrator, tumbling system, continuous vibrator, vibration conveyor, oscillating conveyor, conveyor trough, spiral conveyor -Manufacturer: OSRO, round vibrator type OS10 -Working container: elastically mounted -Total volume: 600 liters -Outer diameter: 1430 mm Dusdpfxeiqpyue Am Tow -Work basin width: 320 mm -Work basin height: 545 mm -Machine for: deburring, polishing, rounding edges -Dimensions: 1570/1430/H1140 mm -Total weight: 1140 kg

Condition: good (used), Finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, after the scraper for edge processing machine -HOMAG finishing unit for cleaning agent application with buffing wheel for removing glue residue from PVC edges Duedpfx Aeb Sgzdsm Tjw -with 2 motors for cleaning from above and below -with oscillation -Swivelable - laterally adjustable -Height: adjustable -Number: 1x aggregate available -Dimensions: 400/370/H470 mm -Weight: 35 kg

Condition: used, Tool grinding machine, grinding machine, angle grinder, turning steel grinding machine, steel grinding machine -Elysier grinding possible with the machine -Diamond grinding wheel -1x angle tables: 220 x 310 mm -Angle adjustment: +15° bis -5° -Oscillation: 0-35 mm -Water cooling with: electrolytes -Sanding dust extraction -Max. Steels cross section: mm -Number: 1x grinding machines available -Price: per piece Djdpfx Amjdz U Tlj Touw -Dimensions: 850/700/H1400 mm -Weight: 580 kg

Condition: good (used), Cylindrical vibrator, tumbling facility, tumbling machine, mass finishing cylindrical vibrator, tumbling facility, continuous vibrator, vibration conveyor, oscillating conveyor, conveyor trough, spiral conveyor -Round vibrator: with soundproof hood, small waste water system with spray device -Manufacturer: CETEMA, round vibrator type TM 500A -Working container: elastically mounted -Total volume: 500 liters Dodpfeitv Dbsx Am Tsuw -Outer diameter: 1450mm -Working basin width: 430 mm -Working basin height: 510 - 580 mm -Machine for: deburring, polishing, rounding edges -Dimensions machine: 1570/1430/H1140 mm -Dimensions of waste water system: 1010/520/510 mm -Total weight: 1450 kg

Condition: good (used), Rotary vibrator, vibratory finishing system, vibratory finishing machine, vibratory finishing rotary vibrator, trowal system, continuous vibrator, vibration conveyor, oscillating conveyor -Manufacturer: circlon, round vibrator Trowal vibrator with soundproof hood -Total volume: 230 liters -Type: CLS-230 -Working container: elastically mounted -Working basin width: 250 mm -Outlet: approx. 200 x 260 mm -Working basin height: 510 mm Dodpfsiy Ef Asx Am Touw -Equipment: manual separating flap, infinitely variable engine speed via variator gear, liquid connection -Machine for: deburring, polishing, rounding edges -Transport dimension: 1700/1600/H2240 mm -Total weight: 1150 kg