Used Screw Compressor Ask34Sfc for sale (7,453)

Condition: excellent (used), Year of construction: 2019, S016950 PROD. ALUP TYPE LARGO37 S/N API588037 YEAR 2019 POWER (kW) 37 CAPACITY (m3/min) 6.66 DISCHARGE PRESSURE (bar) 7.5 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON-TANK MOUNTED no DOCUMENTS no Bodpszuc S Aofx Af Aeln CONNECTION 1 1/2 NEW/USED USED WARRANTY ON THE SCREW COMPRESSOR STAGE - 6 MONTHS!!!

Condition: new, Year of construction: 2025, Viber-Air Power: 7.5 kW / 7.5 HP Motor speed: 3000 rpm Tank capacity: 500 liters Voltage and frequency: 400V / 50Hz Water resistance: IP23 Noise level: 65 dB Operating pressure: 10 bar Bledpexdbvrsfx Af Aon Air flow: 800 l/min. Drive type: direct drive Outlet diameter: G 3/4 Dehumidifier: TR-10HP Cooling: Air Screw manufacturer: BAOSI Inverter: Included Display: HTK070 Dimensions (length/width/height): 1900/800/1660 mm Weight: 390 kg Suction capacity: 950 l/min Discharge capacity: 800 l/min

Condition: excellent (used), Year of construction: 2014, S016896 PROD. ATLAS COPCO TYPE GA75VSDFF S/N API668061 YEAR 2014 POWER (kW) 75 CAPACITY (m3/min) 15.09 DISCHARGE PRESSURE (bar) 12.75 HOURS (SERVICE/TOTAL) FREQUENCY CONVERTER yes BUILT-IN DRYER yes, R410a 1.1kg HEAT EXCHANGER no COOLED BY (AIR/WATER) air Bljdpfx Afszi Dbho Aen ON TANK no DOCUMENTS no NEW/USED USED

Condition: new, Year of construction: 2026, Viber-Air INV11-500 Screw Compressor with Dryer and Inverter Power: 11 kW / 7.5 HP Motor Speed: 3000 rpm Tank: 500 liters Voltage and frequency: 400V / 50Hz Water resistance: IP23 Noise level: 65 dB Operating pressure: 10 bar Air flow: 1500 l/min Drive type: direct drive Outlet diameter: G 1 Dehumidifier: TR-20HP Cooling: oil Screw manufacturer: BAOSI Bledpfx Afsxdbubo Asn Inverter: Included Display: HTK070 Dimensions (length / width / height): 1900 / 750 / 1030 mm Weight: 500 kg Suction capacity: 1800 l/min Discharge capacity: 1500 l/min

Condition: excellent (used), ABAC SPINN compressor Air dryer, Tank: 270 liters, Blsdoz Epd Djpfx Af Ajn 7.5 kW motor, Pressure: 10 bar, Weight: 250 kg.

Condition: excellent (used), Year of construction: 2015, KAESER SX 8T screw compressor with air dryer, after service. Technical data: capacity: 0.68 m3/min (680/min); engine power: 5.5 kW; pressure: 11 bar; operating hours: 7890 h; year: 2015. The compressor is in full working order. We provide service support. Below is a link to a video showing the machine in operation. Bjdpfx Afjyt H Sfe Aoln

Condition: excellent (used), Year of construction: 2013, PROD. KAESER TYPE BSD83 S/N 1036 YEAR 2013 POWER (kW) 45 CAPACITY (m3/min) 8.16 PRESSURE (bar) 8.5 HOURS (RUNNING/TOTAL) 41872/62783 FREQUENCY CONVERTER no BUILT-IN DRYER no Bodpfx Afszq Aluj Asln EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 1/2' NEW/USED USED

Condition: used, Year of construction: 2014, operating hours: 34,146 h, Atlas Copco GA15+ Screw Compressor For sale is a screw compressor manufactured by Atlas Copco, model GA15+. This compressor is ideal for industrial and commercial applications and is known for its reliability and durability. Technical specifications: Manufacturer: Atlas Copco Bedpfx Afoybbcho Asln Model: GA15+ Type: Screw compressor Year of manufacture: 2014 Operating hours: 34,162 h Note: All information is provided to the best of our knowledge, but without warranty. If you are interested or have any further questions, please do not hesitate to contact me.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, power: 400 kW (543.85 HP), volume flow: 3,996 m³/h, pressure (max.): 8.5 bar, type of cooling: water, Equipment: type plate available, Second-hand Atlas Copco GA400W Bodpjw A N Dwsfx Af Asln 400 kW, 8.5 bar with 66.60 m³/min Water-cooled. Year of manufacture: 2009.

Condition: excellent (used), Year of construction: 2011, volume flow: 3.21 m³/h, operating pressure: 8 bar, pressure (min.): 10 bar, Boge C 30 D screw compressor With desiccant dryer 22 kW motor Capacity: 3.21 m3/min Pressure: 10 bar Year of manufacture: 2011 Operating hours: 16,300 hours COMPRESSOR IS IN FULLY WORKING CONDITION. NET PRICE: 14,000,- Bsdpfxjywz Hmo Af Aoln GROSS PRICE: 17,220,-

Condition: as good as new (ex-display), Compressor, rotary screw compressor, high pressure gas compressor, industrial refrigeration compressor, Howden MK1S,Used machine Manufacturer: Howden Compressors Limited Type: MK1S WRViHS/365193/58/028 Serial No: N12533 -max. inlet pressure: 2.9 bar g Bljdjy Snk Uspfx Af Ajn -max. working pressure (outlet): 35.5 bar g -casing design pressure: 42.0 bar g -hydraulic test pressure: 63.0 bar g -max. continuous speed: 2970 RPM -setting: variable volume ratio (Vi setting) -place of manufacture: Glasgow, G52 1BE

Condition: excellent (used), Year of construction: 2020, S016059 PROD. ALUP TYPE SCK30 CE S/N ITJ370650 YEAR 2020 POWER (kW) 22 CAPACITY (m3/min) 3.22 m3/min PRESSURE (bar) 10 HOURS (RUNNING/TOTAL) 0 (new controller) INVERTER NO BUILT-IN DRYER NO EXCHANGER NO COOLED (AIR/WATER) AIR ON TANK NO Bledpfxjz A Tm Do Af Aon DOCUMENTS YES CONNECTION NEW/USED Used

Condition: excellent (used), Year of construction: 2006, Kaeser, 15 kW, 8 bar. Bljdpfxoztb S Se Af Ajn

Condition: new, Year of construction: 2026, LUFT 1000 COMPACT Screw Compressor with Refrigerated Air Dryer and 270 L Compressed Air Tank The LUFT 1000 COMPACT screw compressor with an integrated refrigerated air dryer and a 270 L compressed air tank is a modern solution designed for reliable and efficient compressed air supply. The CORMAK LUFT series screw compressors combine state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. THE SET INCLUDES: LUFT 1000 COMPACT screw compressor with refrigerated air dryer 270 L horizontal compressed air receiver Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or small production line? The CORMAK LUFT 1000 COMPACT screw compressor with refrigerated air dryer is an excellent choice. With a 7.5 kW motor and an impressive actual output of up to 990 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. It can also be used as a compressor for small sandblasting machines. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, automotive workshops and small manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The screw compressor is also equipped with an integrated refrigerated compressed air dryer, which provides dry and clean air while protecting the compressed air system against corrosion and damage. The LUFT 1000 COMPACT oil-injected screw compressor with dryer features a traditional belt drive, resulting in easier maintenance and lower servicing costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and a worn belt can be easily replaced with a new one. Extended Component Service Life The belt drive also contributes to longer component life. The absence of a rigid connection between the motor and the compressor's working components reduces mechanical wear and stress, helping to extend the service life of the system. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key machine information and greater flexibility and control over the production process. Blodpfx Afjmqlprj Aen Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 990 l/min ✅ Motor power: 7.5 kW Technical Specifications Parameter Specification Motor power 7.5 kW Voltage 400 V / 50 Hz Output at 0–6 bar 990 l/min Output at 6 bar 950 l/min Output at 8 bar 950 l/min Output at 10 bar 930 l/min Outlet connection diameter (G) 3/4" Compressor dimensions 1320 × 650 × 945 mm Dimensions with tank 1495 × 1200 × 1545 mm Weight 350 kg

Condition: good (used), Year of construction: 2005, operating hours: 50,000 h, functionality: fully functional, overall weight: 850 kg, Equipment: refrigerant dryer, Screw compressor, 22 kW, with built-in refrigerated dryer; disassembled but in good condition. Bsdpjzb Drxjfx Af Aoln

Condition: excellent (used), Year of construction: 2015, S015502 PROD. KAESER TYPE ASD35 S/N 2556 YEAR 2015 POWER (kW) 18.5 CAPACITY (m3/min) 3.16 PRESSURE (bar) 8.5 HOURS (RUNNING/TOTAL) 49901/49225 FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER yes Blodpfxjz D D Afs Af Aen COOLED (AIR/WATER) air/water ON TANK no DOCUMENTS no CONNECTION 1 1/4 NEW/USED USED

Condition: excellent (used), Year of construction: 2006, Kaeser, 15 kW, 8 bar. Blsdpfxjztb Tvo Af Aon

Condition: excellent (used), Year of construction: 2013, PROD. KAESER TYPE DSD202SFC S/N 1937 YEAR 2013 POWER (kW) 110 CAPACITY (m3/min) 4-17.3 PRESSURE (bar) 10 Bsdpfx Afezu Inpe Aoln HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER yes COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTIONS 2 NEW/USED USED

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 500 L Key Features of the Energy Saver Series 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Saves the electrical installation in the facility Bsdpeycg Rysfx Af Aeln Allows frequent start/stop cycles without overheating the windings 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 1840 × 640 × 1470 mm Weight: 320 kg

Condition: used, Year of construction: 2021, Technical details: feed pressure: 10 bar total power requirement: 7,5 kW volume capacity: 1,1 m³/min. Number of working hours: 0 h revolutions per minute of the motor:: 3000 U/min. voltage: 400 V / Hz rated capacity: 7,5 KW machine weight approx.: 438 kg dimensions L x W x H: 1,0 x 0,55 x 0,85 m SCREW COMPRESSOR WITH ELECTRIC DRIVE with integrated pressure tank Bljdpfsu Nz D Uex Af Asn - type ADST 8; 6 liters capacity; size Ø 160 x 400mm with integrated dryer operation at the control panel on the unit air filter at the front i.D. *

Condition: new, Year of construction: 2026, functionality: fully functional, LUFT 1000 COMPACT Screw Compressor with Refrigerated Air Dryer and 500 L Compressed Air Tank The LUFT 1000 COMPACT screw compressor with an integrated refrigerated air dryer and a 500 L compressed air tank is a modern solution designed for reliable and efficient compressed air supply. The CORMAK LUFT series screw compressors combine state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. THE SET INCLUDES: LUFT 1000 COMPACT screw compressor with refrigerated air dryer 500 L horizontal compressed air receiver Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or small production line? The CORMAK LUFT 1000 COMPACT screw compressor with refrigerated air dryer is an excellent choice. With a 7.5 kW motor and an impressive actual output of up to 990 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. It can also be used as a compressor for small sandblasting machines. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, automotive workshops and small manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The screw compressor is also equipped with an integrated refrigerated compressed air dryer, which provides dry and clean air while protecting the compressed air system against corrosion and damage. The LUFT 1000 COMPACT oil-injected screw compressor with dryer features a traditional belt drive, resulting in easier maintenance and lower servicing costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and a worn belt can be easily replaced with a new one. Extended Component Service Life The belt drive also contributes to longer component life. The absence of a rigid connection between the motor and the compressor's working components reduces mechanical wear and stress, helping to extend the service life of the system. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key machine information and greater flexibility and control over the production process. Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 990 l/min ✅ Motor power: 7.5 kW Technical Specifications Parameter Specification Motor power 7.5 kW Voltage 400 V / 50 Hz Output at 0–6 bar 990 l/min Output at 6 bar 950 l/min Output at 8 bar 950 l/min Output at 10 bar 930 l/min Outlet connection diameter (G) 3/4" Blodpfx Aerh E Dqjf Aen Dimensions 1840 × 650 × 1675 mm Weight 400 kg

Condition: new, Year of construction: 2026, functionality: fully functional, 230 V Screw Compressor CORMAK screw compressors are a guarantee of quality and reliability. Our many years of experience in selling compressors have allowed us to develop models offering an excellent price-to-quality ratio. The presented model is ideally suited for small workshops and small manufacturing businesses. It offers a high output of 380 l/min in relation to its compact dimensions, allowing several devices to be operated simultaneously. The very low noise level of 60 dB ensures that working in the same room is comfortable and not disruptive. Thanks to the use of high-quality components, the compressor has been designed for continuous-duty operation and can also be used in industrial applications. THE SET INCLUDES: LUFT 400 screw compressor 150 L horizontal compressed air receiver Are you looking for an efficient and reliable compressor for smaller workshops, service centres or hobby applications, while requiring a single-phase power supply? The CORMAK LUFT 400 screw compressor is the ideal solution. With a 3.0 kW motor and an impressive actual output of up to 400 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. This model, powered by 230 V / 50 Hz, has been designed for continuous-duty operation, making it ideal for demanding applications such as smaller workshops, tyre service centres and craft businesses. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The LUFT 400 features a reliable and robust direct-drive system, eliminating vibrations and the need for belt-drive adjustment. This proven solution ensures stable operation and a long service life by providing direct power transmission from the motor to the screw compressor element. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key compressor information and greater flexibility and control over the production process. Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 400 l/min ✅ Motor power: 3.0 kW ✅ Power supply: 230 V Technical Specifications Parameter Specification Motor power 3.0 kW / 4 HP Voltage 230 V / 50 Hz Output at 0–6 bar Average 400 l/min Output at 6 bar 390 l/min Output at 8 bar 380 l/min Output at 10 bar 380 l/min Bljdpjza Al Uofx Af Aen Outlet connection diameter (G) 1/2" Dimensions 1130 × 520 × 1300 mm Weight 170 kg

Condition: excellent (used), S014913 Bjdpfsz Dwb Iex Af Ajln PROD. ATLAS COPCO TYPE GX18 S/N API441069 YEAR 2005 POWER (kW) 18.5 CAPACITY (m3/min) 2.64 PRESSURE (bar) 10 HOURS (RUNNING/TOTAL) 46443 FREQUENCY CONVERTER no BUILT-IN DRYER no EXCHANGER no COOLED BY (AIR/WATER) air ON-BOARD TANK no DOCUMENTS no CONNECTION 1 NEW/USED USED

Condition: excellent (used), S016792 PROD. KÄSER TYPE ASD57 S/N 1382 YEAR 2006 POWER (kW) 30 CAPACITY (m3/min) 4.5 Bodjz Dhaujpfx Af Ajln PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 75176/96563 FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air TANK-MOUNTED no DOCUMENTS no CONNECTION 1 1/2 NEW/USED USED

Condition: ready for operation (used), Offered are two identical, belt-driven, sound-insulated Alup screw compressors. Power: 7.5kW, operating pressure: 10bar, capacity: 1m³/min, weight: approx. 215kg. An on-site inspection is possible. Blodpfxoztrb Do Af Asn