Used Endress Duplex for sale (1,366)

Condition: like new (used), total width: 20 mm, total length: 24 mm, total height: 16 mm, Liquiline CM442 Controller, ENDRESS HAUSSER - IND27827-OC - 063 Liquiline CM442 is a state-of-the-art transmitter for measuring parameters such as pH, redox, conductivity, oxygen, chlorine, turbidity, sludge level, COD, nitrate, etc. The Liquiline CM442 transmitter allows you to connect up to 2 Memosens sensors of your choice from more than 12 measurement parameters. It automatically recognizes the sensors, is easy to operate, and features standardized spare parts that are compatible with other devices in the Liquiline platform. With its inputs, outputs, controllers, and mathematical modules, you can even control cleaning systems and dosing pumps. Heartbeat Technology helps to find the ideal balance between the availability of the measurement point and maintenance costs. Liquiline CM442 is suitable for all industries and their auxiliary applications, such as: Food and beverage Life sciences Power plants and energy Water, wastewater, and waste Chemicals Marine It features the following communication protocols and interfaces: 0/4 ... 20 mA HART PROFIBUS DP Modbus RS485/RTU Modbus TCP EtherNet/IP PROFINET Web server The transmitter can be expanded with a module whose approvals for explosion protection, such as IECEx, ATEX, and CSA, allow it to be connected to sensors installed in areas with a risk of explosion. Advantages Intelligent Simplicity: one controller for all parameters and applications, with an intuitive user interface, automatic sensor recognition, and plug & play hot-swapping with pre-calibrated Memosens sensors. High Flexibility: universal modules for all parameters minimize spare parts inventory and allow the system to be expanded at any time with up to 8 channels. Direct Integration into the System: the unique portfolio of communication standards adapts to any distributed control system (DCS). Simple and Safe Commissioning: the ability to save the configuration to an SD card allows for quick commissioning of duplicated installations. Remote Process Control: integrated web server that allows the operator to remotely view diagnostic data, perform configurations, or access the equipment parameters from any web browser, even from a smartphone. Higher Availability, Lower Costs: Heartbeat Technology enables condition-based maintenance and simple verification of the complete measurement point, in addition to helping you take optimization measures. Promoting Connectivity: Liquiline Edge Module CYY7 transfers process data to Netilion, regardless of the fieldbus. This allows for an overview and the use of IIoT services. It is available in new products or as an upgrade for installed Liquiline platforms. Itedpfx Ajz Tl Rkenion Summary of Specifications Input 1 to 2 digital Memosens inputs Output / Communication 2 to 4 current outputs of 0/4 to 20 mA Alarm relay, 2 relays Ingress Protection IP 66 / IP 67 Additional Certificates EAC, cCSAus, MCERTS

Condition: used, Year of construction: 2008, functionality: fully functional, total width: 227 mm, total length: 840 mm, total height: 505 mm, overall weight: 55 kg, We are offering this used Endress+Hauser Promass 83F80 DN80 Coriolis flow measurement system, manufactured in 2008. Manufacturer: Endress+Hauser Ijdpfx Aoz Ey S Ssnietn Model: 83F DN80 Year of manufacture: 2008 Condition: used, in excellent condition Type: Promass Coriolis flow measurement system If you have any questions or would like more information, please send us a message or call us. Multiple products are available; if you are interested, please contact the seller: Derikxgebruikstesturingenenmeer.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, heating capacity: 350 kW (475.87 HP), Heating system, heating, chip heating Manufacturer Endress Type USF-W 350 Iedpfeznca Hox Anistn Output 350 kW Year of manufacture 2010 with feed with ash discharge with control

Condition: used, Machine: ENDRESS+HAUSER PROMAG 33 H 85-260V Serie 33ip65-ccaa13a21a Mengenzähler Gewinde NW 65 Itjdpfjz Sdqbjx Anisn

Condition: good (used), Year of construction: 2011, Programmable universal temperature transmitter – used: Price per unit, ex warehouse: €95 (net)! Manufacturer: Endress+Hauser Type: TMT181-A Year of manufacture: 2011 Order code: TR88-AB4C1E2G3000 Serial number: E301AC14158 1x Pt100/TF/4 CLA -50...250°C Measuring range: -50..400°C IP66/1P68 Ijdpfx Aez Sdx Ejniotn NEMA IX TYPE 4X ML = 260 mm Available quantity to be determined Condition: good Available: immediately Location: Bünde, North Rhine-Westphalia

Condition: excellent (used), operating hours: 6,060 h, machine/vehicle number: PEE2655066, fuel type: diesel, color: red, power: 108 kW (146.84 HP), General information Year of manufacture: Oct 2019 Year of construction: 2019 Model year: 2019 Field of application: Construction Technical information Number of cylinders: 4 Engine capacity: 4.400 cc Empty weight: 1.503 kg Functional Supply voltage: 400 V Generator capacity: 115 kVA CE mark: yes Condition Technical condition: very good Visual appearance: very good Damages: none Product safety Manufacturer: Endress DE Other information Emissions class: Stage IIIA Additional information Please contact Ernst van Hek for more information Endress ESE 115 kVA Generating Set (2019) Engine: Reliable Perkins Turbo Diesel Itodpfx Anezwf Dyeion Controller: ComAp InteliGen NTC (Parallel ready) Hours: 6,059 hrs (Freshly serviced at 6,059 hrs – 0 hours since service!) Condition: Excellent, robust soundproof canopy, galvanized base frame with forklift pockets and lifting lug. Ready for immediate use!

Year of construction: 2014, operating hours: 20,914 h, condition: used, = More information = Itjdpfx Anjyxkmxeion Please contact Tobias Ebert for further details.

Year of construction: 2015, condition: used, Waste water neutralisation Capacity: 8 m3/h Operation / Control: Control cabinet with touch-screen display / WAGO Isdpfx Ansxbqr Doijtn Features: Neutralisation vessel (37 hl); final control vessel (4,5 hl); caustic vessel; acid vessel; pumps; process measurement, instrumentation and control technology; control cabinet

Condition: used, functionality: fully functional, input voltage: 230 V, operating temperature: -50,150 °C, protection type (IP code): IP65, input frequency: 5,060 Hz, Equipment: type plate available, Measurement converter for controlling and monitoring pH values in industrial installations. A device from the renowned brand Endress+Hauser, ensuring precise and stable measurements, as well as reliable operation in demanding conditions. Ideal for industrial applications, process automation, and water treatment systems. Fully functional up to the last minute of operation before dismantling. Measurement range: 0...14 pH Output 1: 0/4...20mA Output 2: 0/4...20mA Iodpfx Asz Ndpvenistn Recommended for spare parts. I have 3 units + accessories.

Condition: new, Year of construction: 2020, 1x New Endress & Hauser Promass E 300 and also 1x New Endress & Hauser Promass F 80 Ijdoxtvfmepfx Aniotn

Year of construction: 2017, condition: excellent (used), Flame Lamination Line, 2,000 mm Working Width, Year 2017 It is in very good condition and has only been used occasionally. It was mainly used for single lamination of PVC foil with thin PU foam for the packaging industry. The line is built on a welded steel frame and supplied in pre-assembled modules. It includes a flame laminating unit with three water-cooled, hard-chrome-plated precision calender rolls. The centre roll is fixed; the two outer rolls are motorised and position-adjustable. The lamination gap is adjustable up to 50 mm, with positioning accuracy of ±0.1 mm. Settings are controlled and displayed via the HMI. The burner section has two standard Type 40 water-cooled burners, interchangeable nozzle bars, pneumatic positioning and exhaust hoods. A gas control station with gas/air mixing system is designed for LPG; flame intensity is electrically adjusted and displayed on the HMI. Material feeding and handling equipment includes thread-spreading and guide rollers, synchronised rubber-coated infeed rollers, a backing-material unwinder with pneumatic roll lifting, and a foam unwinder for rolls up to 2,400 mm diameter. A Type FSE 2000/20 foam film welding machine is included. The TA L textile accumulator has a capacity of approx. 100–200 m (depending on material), maximum working width 2,000 mm, stainless-steel table, roll unwinder and web laying device. The line features a GR3 automatic foam-web edge guiding system with optoelectronic sensor and electrically actuated steering frame; adjustable edge offset 5–20 mm. The BTB 01 edge trimming unit has two electrically driven rotary knives, adjustable cutting width and safety guards. Extended knife shafts are optional; a centre-slitting device is included in the scope of supply. Finished-product transport is provided by synchronised pull-off rollers, including a pneumatic pressure roller. The centre-driven winder has manually adjusted tension, with automatic compensation based on winding diameter; winding direction is selectable. A measuring wheel records product length. The PLC control system provides electronic synchronisation of the main and auxiliary drives; auxiliary speeds are adjustable ±10% relative to the main drive and displayed on the HMI. Underfloor material discharge is optional. Itsdpfx Ajz E S Hhsnisn Technical data: • Year: 2017 • Maximum working width: 2,000 mm • Calender roll width: 2,200 mm • Production speed: up to 60 m/min, variable • Electrical supply: 400/230 V, 50 Hz, 3-phase + neutral • Connected load: approx. 14 kW • Cooling water: approx. 2.5 m³/h; 1" connections • Compressed air: 6 bar • Fuel: LPG; 60–100 mbar; consumption up to approx. 12 kg/h, depending on burner setting • Winding height: 1,100 mm • Weight: approx. 6,000 kg • Installation footprint: approx. 17 × 4 m We can arrange transport to your factory, installation and operator training. Contact us for a detailed offer.

Condition: excellent (used), Viessmann Paromat Duplex boiler in excellent condition, 1070 kW Ijdpfsyzctiex Anistn

Condition: good (used), Year of construction: 1991, Table clamping surface: 710 x 400 mm Tool holder: ISO 40 Travel paths: X-axis: 400 mm Y-axis: 350 mm Iodpeupiypofx Anijtn Additionally displaceable in Y-axis: 420 mm Z-axis: 380 mm Quill stroke: 80 mm Speed range: 45 – 2240 rpm Feed range, stepless: 6.3 – 1250 mm/min Rapid traverse: 1250 mm/min Drive power: 2.2 / 2.8 kW Dimensions (L x W x H): 1400 x 1600 x 1850 mm Weight: 1900 kg Accessories / Special Features: • 3-axis digital readout by HEIDENHAIN • Vertical and horizontal milling spindle • Vertical milling head with quill, tiltable right and left • Stepless feed • Rapid traverse on all 3 axes • Fixed angle table • Coolant system • Chip tray • Spindle clamping by push button, e.g., for tool change • Machine feet • Central lubrication • Control panel • Emergency stop switch Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 1990, type of input current: three-phase, Film wrapping machine + shrink tunnel KUPER DUPLEX 2100/650 + KUPER ST/I-1400 Film wrapping machine Manufacturer: Kuper Type: DUPLEX 2100/650 Year of manufacture: 1995 Film roll width at the top: 2000 mm Film roll width at the bottom: 2000 mm Packaged goods height (passage height): 650 mm Film roll diameter: 400 mm Compressed air: min 5 bar Compressed air consumption (per cycle): approx. 16 L swing arm with chain lift seal bar length 2100 mm "Siemens" control panel overall dimensions: 3000x2000x2300 mm Shrink tunnel: Iodpfekn Rz Hjx Anietn Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand black-and-white photocopier, the ‘Canon iR Advance DX 6860i’. Item for sale: 1 x Canon iR Advance DX 6860i with the following features: Includes duplex Includes ADF / R-ADF Not the right configuration? We can easily configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 1,063 pages Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested to ensure it is in working order. A test print can be seen in the photo Packaging and dispatch: You are welcome to view the machine during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! Itsdpfxezb Akas Anijn A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, measuring range X-axis: 4,000 mm, measuring range Y-axis: 3,200 mm, measuring range Z-axis: 2,100 mm, workpiece weight (max.): 4,500 kg, total height: 3,660 mm, type of input current: AC, total length: 4,800 mm, overall weight: 11,000 kg, input voltage: 230 V, table width: 3,200 mm, table height: 725 mm, table length: 4,800 mm, year of last overhaul: 2024, Equipment: documentation/manual, type plate available, Dual-column CMM * Floor-mounted design (measuring plate in one piece, 5000 x 3100 mm) * Measuring plate is decoupled with active vibration isolation Isdjz Rpmwspfx Anietn Measuring range * X 4,000, Y 2 x 1,600 (3,200), Z 2,100 [mm] * Overlap of columns in Y = 150 [mm] Measuring uncertainty Single column: 20 + L/60, max. 60 [µm] at L = 4,000 mm Dual column: 40 + L/35, max. 80 [µm] at L = 4,000 mm Dynamics 3D traversing speed 433 mm/sec 3D acceleration 768 mm/sec² Probing system (per column) * HEXAGON HH-AS2.5° * Optical laser scanner, type HP-L-10.10 Controller (per column) * DC800 ETH Wireless operating unit * Portable terminal with display Computer (per column) * DELL Tower, 24" monitors * According to the software manufacturer's specifications Software (per column) * PCDMIS CAD++ 2026.R1 * Option: Laser sensor HP-L-10.10 * Dual-column function Extensive accessories * Calibration sphere holder - tactile probes - equipped with 3 * Calibration sphere holder - optical laser - equipped with 2 * Variable stylus assortment * 8-position modules in various lengths * SICK light curtain system integrated for automatic operation, all-round Supplier services * Transport, commissioning, calibration, final acceptance Warranty * 12 months, from the date of acceptance Availability * Short-term

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand “Canon imagePRESS V700” colour production system Item for sale: 1 x Canon imagePRESS V700 with the following specifications: Isdpez Nw Iasfx Anistn incl. POD Deck Lite-C1 paper deck incl. Duplex ADF / R-ADF incl. AG1 staple finisher Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 205,957 pages Black: Approx. 95,702 pages Colour: Approx. 110,255 pages Condition: This is a second-hand machine, which may show signs of wear (minor scratches or yellowing). The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: new, functionality: fully functional, Endress + Hauser Proline T-Mass 651-30AB1AD1AAABCA Thermal Mass Flow Meter 6 pieces available Iodpfjznw Hzex Aniotn Brand new, unused, ex stores stock. Sold as seen.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, working width 910 mm Iedpfxszxqa No Anijtn upper combination unit lower combination unit two feed speeds belt oscillation electronic material thickness setting material thickness gauge Table with vacuum pump on the second unit Year of manufacture: 2009 New conveyor belts installed in 2023

Condition: good (used), Pressure transmitter, Endress+ Hauser – used: Iodpfez Sdxrex Aniotn Price per unit, ex works: €95.00 (net)! Manufacturer: Endress+ Hauser Type: unknown / will be provided later Year of manufacture: unknown / will be provided later Available quantity: to be determined Condition: good Available: immediately Location: Bünde, North Rhine-Westphalia

Condition: excellent (used), Year of construction: 2012, Ref:11153 . 2012 SCS Automaberg Trim & Perf Duplex Die-cut, Trim, Split, Cut, Perforate, Punch System, handling any material. Features: A highly versatile and productive line which is a genuine “ALL-IN-ONE” solution for finishing operations. The line can include different workstations for multiple tasks and process optimization. The combination of TRIM & PERF with complementary modules offers high quality products combined with reliability, allowing the needs of digital systems to be met, as well as those for binding, in particular, the production of products for single and multi-up work IN A SINGLE PASS. Features: Easily moveable. In-feed belt height adjustable for easy connection with upstream machines. A simple push button transforms TRIM & PERF into a regular conveyor belt, no bypass or similar equipment needed. ‘CONTINUOUS FEEDER’ Top loading, bottom feeding, rubber belt type feeder for single or folded sheets, saddle stitched products and perfect bound books. ‘3 WAY’ This module allows perfect alignment of digital sheets to a print reference mark. ‘GRIPPER’ Electronic system for pass die-cutting: reduces machine set-up times and overlaying, allows a high level of product repeatability and reduces costs of American style dinking dies. Waste ejection system allows for die cutting without waste, clean shape products. ‘THERMO STICK’ holds some sheets together on the ink reference sides by ‘thermo’ welding - improving the die cutting process. ‘PRE-CUT DEVICE’ Perfect 'spine' cutting system up to 14 mm thickness. ‘TEAR OFF - PULL AWAY’ The system pulls away mingled perforation sheets in preparation for the sewing step. ‘SIMPLE DECK’ Collects cards in series after die cutting. ‘EXIT BELT’ Shingle delivery belt with batch counter. DIE CUTTING No nicks! Connections between the cut product and the waste are not required. Automatic waste ejection. 'Clean' shapes ready to be packed. TRIMMING-SPLITTING Superior quality in splitting and trimming - also for very small dimensions. ROUND CORNER CUTTING Cutting including all four corners in a single pass. PERFORATING PUNCHING Combined perforating-punching jobs in a single pass to optimize production process efficiency. IDEAL FOR:- Flat cardboard, also laminated up to 2 mm thickness, and on plastic material up to 1 mm thickness. Folded and stitched product die cut without waste. Pre-cut device for perfect spine cutting up to 14 mm thickness. Standard corner radii from 3 to 15 mm. Stamp perforating, wire-comb perforating, tear-off perforating, single hole punching, file hole punching, euro hole. Specifications: Product size untrimmed (LxW) (sizes subject to jobs) Standard max. 500 x 600 mm Standard min. 50 x 50 mm Product thickness, Standard max. 4mm (optional max.) 14mm Mechanical speed, max. 9.000 cycles/hr Isdpfxsz Ek S As Anietn Compressed air requirement: 200 l/min at 6 bar.

Condition: good (used), travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, table width: 270 mm, table length: 800 mm, type of input current: three-phase, rotational speed (max.): 2,000 rpm, Brand: Thiel Model: Duplex 159 Itedpfx Aez Dt Htenisn 3-axis coordinate display Travel: X 500mm, Y 300mm, Z 400mm ISO 40 Speeds: 40 - 2000 rpm Table: 800x270mm Includes an accessory for additional table tilting. Includes all the tools shown in the photographs. Includes a vise with a rotating base. Features safety guards in compliance with CE standards.

Condition: used, functionality: fully functional, Year of construction: 2000, operating hours: 5,004 h, load capacity: 1,800 kg, lifting height: 3,350 mm, fuel type: gas, mast type: duplex, construction height: 2,150 mm, empty load weight: 2,790 kg, drive type: Treibgas, Gas-powered forklift Mast type: Duplex Condition: Ready for use and fully functional Itedpfsz Sic Aex Anien Technical condition: good Front tire type: Solid rubber Front tire condition: 40 - 60% Rear tire type: Solid rubber Rear tire condition: 60 - 80% Description: Front forklift - gas-powered forklift OM G18 - - - 5004 operating hours according to the display - - Year of manufacture 2000 - - 1.8 ton lifting capacity - - 3.35m lifting height - - 2.15m overall height - - Side shifter - - Duplex free-lift mast - - 3-cylinder OM-Fiat engine - - Solid rubber tires, front approx. 50%, rear approx. 70% - - - Power steering - - - New service performed - - - Very maneuverable forklift - - - Good condition Side shifter, 3rd valve, front work light, overhead guard.

Year of construction: 2021, condition: used, Angle indicator: Scale Dimension indicator for cutting flaps: Scale Itodpfx Ajz I Iuyonijn

Year of construction: 2015, condition: used, Angle display: digital Isdjz A D Urspfx Anietn Length stop flap measurement display: digital