Used Temeka Messschieber 2000Mm for sale (569)

Condition: used, Year of construction: 2007, workpiece diameter nominal 2400 mm max. workpiece diameter 2800 mm max. module 30 mm control Siemens Sinumerik 840 D dividing plate diameter 2200 mm table diameter 2500 mm Table hole Diameter / depth 800 / 875 mm max. table load 40000 kg Table rpm 4,5 min-1 clamping length max. 375 mm clamping diameter max. 350 mm cutter diameter max. 2800 mm Cutter arbor cone HSK-B160 swivelling range milling head + 30/-45° Distance Cutter - Workpiece 615 / 1600 mm weight of the machine ca. 57 t Slide drives: - Feed & rapid traverse speed: - axial 4000 mm/min - radial 3000 mm/min - tangential 3000 mm/min Equitment/Accessories: - IFK2 internal milling head - Milling arbor with spacers Dcjdpsw Rf S Sjfx Aa Nsg - chip conveyor - Oil mist extraction - technical Documentation

Condition: new, Year of construction: 2018, Special features of the gantry design: Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio. Dcjdpfx Aasd Ambts Nsg The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine. 24 air bearings for smooth movement of the three axes. High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs. Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, Air filter and regulator. Z-axis pneumatic counterweight system. Granit table with thread inserts of size M10. Passive vibration isolation pads Software: metrolog AN Scan Standard Geosurf Advanced SP Step converter I ++ interface Technical specifications Measurement paths: X: 1200mm Y: 2000mm Z: 1000mm Max workpiece weight: 1200kg Weight of the measuring system: 5700kg Overall dimensions: 3020x2190x3750mm Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.9μm Volumetric length measurement deviation: MPEE = 2.9+ L / 350 (μm) Environmental conditions: Room temperature standard: 18-22 ° C Operating temperature 10-35 ° C Air Supply: Minimum air pressure: 6bar Air consumption: 120NI / min

Year of construction: 2000, condition: ready for operation (used), Clamping force: 850kN, tie-bar spacing: 370mm/370mm, platen dimensions X/Y: 540mm/540mm, opening stroke: 450mm, machine dimensions X/Y/Z: approx. 4000mm/1300mm/2000mm, weight: approx. 4250kg. Some parts of the machine have been renewed in recent years. Documentation available. An on-site inspection is possible. Dcsdey Igcnepfx Aa Nog

Condition: used, Year of construction: 1984, total length: 3,700 mm, total width: 2,000 mm, total height: 1,650 mm, Colour: Grey Weight: 5.000 kg - Year: 1984 - Documentation available: No - CE certificate present: No - Serial number: 8406029 - Drive system: Conventional - Drive type: Hydraulic - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3050 - Throat depth [mm]: 200 - Backgauge type: Electric Dsdpfoy Dcm Usx Aa Necg - Backgauge depth [mm]: 1000 - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Manual - Table type: Standard table - Options: Digital readout - Transport dimensions: 3700mm x 2000mm x 1650mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), A double-sided glass drilling machine Schraml (Lisec-Group) is available. Glass inclination: 8°, max. processing height: 1300mm, max. glass length: 2500mm, max. glass thickness: 40mm, max. drilling diameter: 100mm, speed: 5000rpm, machine dimensions X/Y/Z: approx. 3000mm/900mm/2000mm, weight: approx. 1500kg. An on-site inspection is possible. Dsdpfx Aaey H I Eze Nocg

Condition: ready for operation (used), Year of construction: 2017, A Jakü deaeration and CO2 impregnation system is available. Nominal capacity: 10000l/h, water inlet pressure range: 3bar-4.5bar, CO2 inlet pressure range: 8bar-10bar, nozzles: 3, nozzle fineness: medium/fine/very fine. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2400mm, empty weight: approx. 800kg, operating weight: approx. 1400kg. Documentation available. An on-site inspection is possible. Dcedpfxoy H I Hls Aa Nsg

Condition: ready for operation (used), Year of construction: 1998, A CNC vertical machining center Takumi is available. Travel X/Y/Z: 1800mm/850mm/750mm, spindle nose to table distance range: 200mm-950mm, spindle center to column distance: 920mm, table dimensions X/Y: 2000mm/800mm, max. table load: 2200kg, tool holder: NT50, speed: 6000rpm, feed rate: 5m/min, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 5700mm/3850mm/3350mm, weight: approx. 16500kg, control: Heidenhain, operating hours: approx. 50000h, spindle hours: approx. 25000h. Documentation available. An on-site inspection is possible. Dodpfx Ajy H I H Eoa Nocg

Year of construction: 2007, condition: ready for operation (used), Turning diameter: 430mm, max. swing diameter over bed: 760mm, max. turning length: 860mm, center distance: 990mm, travel X/Y: 280mm/860mm, speed: 3400rpm, chuck diameter: 12inch, tool stations: 12. Machine dimensions X/Y/Z: approx. 3800mm/2000mm/1900mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible. Dcodpfxjy Hvp Ie Aa Nsg

Year of construction: 2008, condition: ready for operation (used), An air-cooled Lennox chiller is available. Cooling capacity: 312kW, power consumption: 96kW, refrigerant: R407C, refrigerant circuits: 2, filling quantity: 2×38kg, compressors: 4, evaporator: plate heat exchanger, water flow rate: 41.2m³/h, pressure loss: 82kPa, glycol content: 30%, air volume flow: 62000m³/h, operating pressure range: 19bar-32bar, test pressure range: 15bar-29bar. Machine dimensions X/Y/Z: approx. 4750mm/1950mm/2000mm, weight: approx. 3300kg. A coil is leaking, and a fan is missing. Documentation available. An on-site inspection is possible. Dcjdpfx Aasy Hvq So Neg

Condition: excellent (used), Toshiba TX 16 Elevating Rail Vertical Borer Djdsy N Aqwjpfx Aa Nocg Manufacturer Toshiba Model TX 16 Year 1981 Condition Used Serial Number 320156 Stock Number 2513 Table 1600mm dia with 4 x Adjustable clamping jaws Swing 2000mm Under Rail 1500mm Vertical Travel distance of C/slide 46″ Vertical Slide travel 1000mm Main Motor 30HP/22Kw Turret 5 Positions, 5 adaptors + 3 extension Bars. Copy Turning Unit. X & Z DRO. Swing Pendant Control & Fixed Station control panels for copy unit.

Condition: new, Year of construction: 2018, functionality: fully functional, Fire protection doors – every door is brand new, unused, and of high quality, only opened for photographing purposes. 2 fire protection doors from Teckentrup Door Solutions (distributed by KAMO Kran und Toranlagen). Fire-rated doors, steel doors, manufactured by Teckentrup, model T30 FSA 62 (internal doors), single-leaf. DIN right, 1000 x 2000mm, primed in RAL 9002 grey-white, made of 1mm galvanized steel. Doors have never been installed. Wrap-around frame (1 piece) for masonry, 265 mm, equipped with GEZE sliding rail. 1 overhead door closer, magnetic contact and bolt contact for status monitoring, Lock with panic function, lever handle set, one door additionally with integrated electric door opener. Dcodohf I Ewspfx Aa Nog Fire-retardant. Door leaf thickness: 62 mm. Unused and as-new condition for sale. An excellent opportunity for optimal fire protection of interior spaces. Price on request. All technical details subject to errors/omissions. Sale only within the countries of the European Union.

Condition: new, Year of construction: 2025, Profile machine MZP-02 2m The MZP machine is used to corrugate sheets to ensure stiffness of thin sheets in the ventilation duct sector. Rolls made of high quality steel can roll 2mm aluminum sheets and 1.2mm black steel sheets. The machine is equipped with transport wheels that allow you to quickly change the location of the machine in the workshop. Machine Specs: Engine with editor Chain driven roller system Fully welded construction Transport possible thanks to the wheel The pressing force can be easily adjusted with the help of adjusting screws Dcjdsfwxm Djpfx Aa Njg Adjustable intermediate distance between the upper and lower shafts The lower and upper rollers are made of hardened long-life steel A practical machine that can be used by people operating in the ventilation industry for many years. Technical specification MZP-02 2000 Working length: 2000mm Range of processed sheets: 0.40 / 1.20mm Engine power: 0.37kW Length: 2240mm Width: 530mm Height: 1050mm Weight: 360 kg

Year of construction: 2025, condition: new, WORKING AREA 2500 X 2000MM (POSSIBILITY OF EXTENDING THE WORKING AREA ON THE Y AXIS) Z AXIS 250MM ESA CONTROL WITH CONTROL CABINET AUTOMATIC HEIGHT SENSOR THC SERVO AC ESA DRIVES SECTIONAL EXTRACTION TABLE Dodpfxspwhgwe Aa Njcg HYPERTHERM MAXPRO200A PLASMA SOURCE GAS BURNER

Condition: new, Year of construction: 2025, overall weight: 1,50,000 kg, We offer Lines for shredding and separating non-ferrous metals and copper cables. The line can be freely modified according to the customer's needs. The attached visualization is illustrative. Machines included in the line: Drum Belt Magnetic Separator Multi-shaft shredder 2 x 18.5 kW MCW-110 1. Loading conveyor (controlled automatically by shredder, according to load) Technical data: - L – 4000mm -Working width – 720mm - Height – 2100mm - Geared motor – 1.5kW - PVC conveyor belt equipped with straight cleats. - Steel structure, placed on self-adjusting wheels 2. Unloading conveyor (receives the shredded material for further process) Technical data: -L. – 3600mm - Working width - 400mm - H – 2000mm - Geared motor – 1.1kW - PVC conveyor belt equipped with a sealing wave and straight cleats - Structure made of acid-resistant steel, placed on self-casting wheels 3. Magnetic separator – (automatically separates unwanted steel elements from the belt of the unloading conveyor) Technical date: - L – 1400mm - Working width – 380mm - Height – 300mm - Geared motor – 0.55kW - Structure made of acid-resistant steel - PVC conveyor belt equipped with straight cleats - Magnetic plate made of permanent magnets 4. Magnetic plate with quick-cleaning overlay – (separates very small steel elements) Technical date: - W – 490mm - L – 330mm -H- 80mm - Housing made of acid-resistant steel Dcodpfx Asv I Shdoa Neg Vibrating feeder PWR-1000 Eddy Current Separator WPS-1000 Discharge conveyor no. 2 of the WPS-1000 separator . Horizontal shredder RKZ-1200 Dust extraction DUST EATER OPW-400 GoldRiver SWZ-700 Water Separator Automatic plastic receiver Automatic metal vibration receiver.

Condition: good (used), Baling press, Schleicher, 16 S – used - : Ex-works price: only €1,950 (net) Manufacturer: Schleicher Model: 16 S Serial number: 6150I1730E Year of manufacture: 20 Height: 2000mm / Width: 1500mm / Depth: 900mm Weight: 1,850kg 380V, 3-phase, 10.3 AMP, 4kW Djdpfx Ajyzcwhea Nscg Condition: good Available: immediately Location: Husum Operating manual not available.

Year of construction: 2022, condition: ready for operation (used), A relatively new CNC waterjet cutting system Intermac is available. Working dimensions X/Y: 3000mm/2000mm, operating hours: approx. 4500h. Documentation available. An on-site inspection is possible. Dcedpfx Aajy E S Eij Nog

Year of construction: 2020, condition: ready for operation (used), A continuous drying system ESC with an integrated UV intermediate module for printing use is available. Heating chamber: fan type: TRZ 250-3, length: 2000mm, recirculating air volume at 510Pa: 3400m³/h, max. temperature: 80°C, heating capacity: 18kW. Cooling chamber: fan type: TRE 250-3, length: 2000mm, air volume flow: 3400m³/h. UV intermediate module: belt width: 1700mm, emitters: 2, max. emitter power: 120W/cm. Belt height: 900mm, outlet element length: 500mm, inlet length: 1200mm, zone lengths: 2000mm, system width: approx. 2250mm, total length: approx. 10700mm. Documentation available. An on-site inspection is possible. Dcsdpfoy E S E Aex Aa Neg

Year of construction: 2021, condition: ready for operation (used), A continuous drying system ESC for printing use is available. Heating chamber: fan type: TRZ 250-3, length: 2000mm, recirculated air volume at 510Pa: 3400m³/h, max. temperature: 80°C, heating capacity: 18kW. Cooling chamber: fan type: TRE 250-3, length: 2000mm, air volume flow: 3400m³/h. Belt height: 900mm, discharge element length: 500mm, infeed length: 1200mm, zone lengths: 2000mm, system width: approx. 2250mm, total length: approx. 10700mm. Documentation available. An on-site inspection is possible. Dcedjy E S E Nopfx Aa Nog

Condition: ready for operation (used), An old Colchester engine lathe is available. Center height: 216mm, swing diameter over bed/cross slide/in gap: 432mm/267mm/711mm, distance between centers: 2000mm, spindle bore: 76mm, speed: 1600rpm, bed width: 343mm. Machine dimensions X/Y/Z: approx. 3200mm/1100mm/1400mm, weight: approx. 2500kg. An on-site inspection is possible. Dcodpfxsy E S D Ee Aa Njg

Condition: repair required (used), Year of construction: 2009, functionality: limited functionality, machine/vehicle number: 305484, saw blade diameter: 450 mm, cutting height (max.): 160 mm, feed length X-axis: 2,000 mm, cutting range round steel at 45°: 150 mm, cutting range round steel at 90°: 150 mm, type of input current: three-phase, cutting range square steel at 45°: 140 mm, cutting range square steel at 90°: 140 mm, CNC cold saw from the renowned brand Kaltenbach, model KKS 401 NA 2000. There is a lot of technical data to list, so I have uploaded several photos with the basic specifications for you to get an overview of the saw’s capabilities. This is a rare model equipped with a feeder (individual lengths) from 0-2000mm, and for repeat operations from 2000-9999mm. Automatic zeroing before cutting. The CNC saw head features automatic rotation of +/-60 degrees, two types of lubrication (emulsion and direct spray application). You can select between ejection of cut pieces via a small parts ejector or by a chain ejector with a drop-down function for longer and heavier sections. The safety fence assembly with IC barriers and numerous spare parts are included with the saw (not shown in the pictures as it is not currently mounted). All original documentation is provided and corresponds to the machine's serial number, ensuring straightforward installation without guesswork. Dcodpsyk Inpsfx Aa Neg Explanation of the issue: the saw is connected to electrical power and every individual function (of which there are many) works perfectly. The problem occurs during automatic operation, most likely due to program parameter issues (it uses the Windows platform). I have not found a suitable programmer willing to learn on my machine. Possible solution: I have contacted the saw manufacturer and they referred me to their authorized service provider, whose contact details I can supply to the prospective buyer. Estimated repair costs in Serbia range from €3000 to €5000; if you are closer to Germany or the Czech Republic, the expenses are significantly lower. Therefore, there are two price categories: if you purchase the machine as is, the listed price applies; if I resolve the issue, the price will be considerably higher. The listed price includes professional dismantling and loading onto the truck (a significant cost factor that is far from negligible); transportation is at the buyer’s expense. I hope this clarifies the current condition of the machine to some extent. Wishing you a successful purchase.

Condition: used, Year of construction: 2012, total height: 2,000 mm, total length: 4,500 mm, total width: 2,350 mm, Empty weight: 1.530 kg - Details: - └ Description: Including dust extraction - Year: 2012 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 18966 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 - - Main motor power [kW]: 11 Dedpoyz Ad Ijfx Aa Necg - Type milling table: Flat table - Tool clamping system: HSK-F63 - Material clamp system: Pneumatic - Tool changer positions [pcs.]: 12 - System/software: BiesseWorks - Safety feature: Enclosed fence, Safety light curtain - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Busch - └ Type: MM 1322 A VM8 - └ Year of manufacture: 2012 - └ Main motor power [kW]: 6 - └ Capacity [m³/h]: 360 - └ Connection diameter [mm]: 70 - └ Vacuum pressure [bar]: 300 - Table length [mm]: 3100 - Table width [mm]: 1500 - Working range X [mm]: 3309 - Working range Y [mm]: 1703 - Z-axis working range [mm]: 120 - Current consumption [A]: 24 - Power [kW]: 14.2 - Transport dimensions: 4500mm x 2350mm x 2000mm (l x w x h) - Transport weight [kg]: 1530kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: new, functionality: fully functional, mileage: 1 km, power: 11.03 kW (15.00 HP), color: yellow, overall weight: 1,000 kg, empty load weight: 1,000 kg, operation weight: 1,000 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2026, operating hours: 1 h, Equipment: additional headlights, hydraulics, Günter Grossmann GG1000 kubota Dankzij een nauwe samenwerken tussen Günter Grossmann en Kubota is de nieuwe GG1000 graafmachine onststaan. Model GG1000 is een geweldige machine voor de meest veeleisende bouw-, elektrisch en hydraulische bedrijven. We garanderen service na de garantie. De graafmachine wordt vervaardigd op basis van solide Europese technologie Standaarduitrusting is een 38 cm brede graafbak. Extra accessoires voor de machine kunnen aangekocht worden. transport kosten uitsluiten op aanvraag leas besprekbaar PECIFICATIES Model: GG1000 Merk: Günter Grossmann Gewicht: 1000kg Capaciteit graafbak: 0.025 m³ Afmetingen graafbak: 2000mm, 380mm, 500mm Motor: Japan – KUBOTA Motor vermogen: 11.8 kw/2300r/min Hoofd pomp: Wanye Hydraulic Zwenkmotor: Dali Rijmotor: Dali Rijsnelheid: 1,5km/h AFMETINGEN Afmetingen (LxBxH): 2770x896x1490 mm Wielbasis: 770mm Lengte rupsen: 960mm WERKBEREIK Max. graaf diepte: 1650 mm Max. graaf hoogte: 2610 mm Max. dump hoogte: 1850 mm Max. graaf radius op de grond: 2890 mm Rotatie radius: 360° Max. Upgrade height of bulldozer blade: 345 mm Max. graaf diepte graafbak: 255 mm evt Bij te bestellen ACCESSOIRES Grondboor Grijper Graaftand Hark Smalle bak 200 mm Smalle bak 380 mm Niveleerbak 500mm Niveleerbak 800mm SnelkoppGünter Grossmann GG1000 kubota Dankzij een nauwe samenwerken tussen Günter Grossmann en Kubota is de nieuwe GG1000 graafmachine onststaan. Model GG1000 is een geweldige machine voor de meest veeleisende bouw-, elektrisch en hydraulische bedrijven. We garanderen service na de garantie. De graafmachine wordt vervaardigd op basis van solide Europese technologie Standaarduitrusting is een 38 cm brede graafbak. Extra accessoires voor de machine kunnen aangekocht worden. transport kosten uitsluiten op aanvraag PECIFICATIES Model: GG1000 Merk: Günter Grossmann Gewicht: 1000kg Capaciteit graafbak: 0.025 m³ Afmetingen graafbak: 2000mm, 380mm, 500mm Motor: Japan – KUBOTA Motor vermogen: 11.8 kw/2300r/min Hoofd pomp: Wanye Hydraulic Djdpfx Aogi Rxkja Necg Zwenkmotor: Dali Rijmotor: Dali Rijsnelheid: 1,5km/h AFMETINGEN Afmetingen (LxBxH): 2770x896x1490 mm Wielbasis: 770mm Lengte rupsen: 960mm Bonwqxjysh WERKBEREIK Max. graaf diepte: 1650 mm Max. graaf hoogte: 2610 mm Max. dump hoogte: 1850 mm Max. graaf radius op de grond: 2890 mm Rotatie radius: 360° Max. Upgrade height of bulldozer blade: 345 mm Max. graaf diepte graafbak: 255 mm evt Bij te bestellen ACCESSOIRES Grondboor Grijper Graaftand Hark Smalle bak 200 mm Smalle bak 380 mm Niveleerbak 500mm Niveleerbak 800mm Snelkoppeling Breekhamer

Condition: ready for operation (used), Year of construction: 2014, turning diameter over cross slide: 370 mm, turning length: 2,000 mm, spindle bore: 104 mm, spindle speed (max.): 2,000 rpm, Model: Alpha 1550 XS Year: 2014 Control: FANUC Oi-TD Swing Over Bed: 554mm Swing Over Cross Slide: 370mm Swing in Gap: 830mm Distance Between Centres: 2000mm Dcodpey Dubwefx Aa Neg Spindle Bore: 104mm dia. Spindle Speeds: 1 to 2000 RPM Machine with: 3 - jaw chuck 4 - jaw chuck Fixed Steady Quick Change Toolpost

Condition: used, Year of construction: 1969, total height: 2,000 mm, total width: 2,300 mm, total length: 2,000 mm, Empty weight: 3.800 kg - Year: 1969 - Documentation available: No - CE certificate present: No - Serial number: 9327 - Drive system: Conventional - Horizontal/vertical: Horizontal and vertical Djdpfx Asyzhdmsa Necg - Number of axes [pcs]: 3 - X-axis travel [mm]: 1000 - Y-axis travel [mm]: 420 - Z-axis travel [mm]: 710 - Table length [mm]: 1520 - Table width [mm]: 385 - Tool holder: ISO50 - Main spindle power [kW]: 11 - Min. spindle speed [rpm]: 25 - Max. spindle speed [rpm]: 2000 - Transport dimensions: 2000mm x 2300mm x 2000mm (l x w x h) - Transport weight [kg]: 3800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2011, condition: ready for operation (used), Various metalworking machines, including a larger Wagner radial drilling machine, are available. 1) Column radial drilling machine Wagner PRC 50, year of manufacture: 2011, drilling capacity (steel): 50mm, spindle stroke: 315mm, outreach range: 350mm-1600mm, spindle-base plate distance: 370mm-1270mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2500mm/1100mm/2900mm, weight: approx. 3500kg. The machine has an unknown defect. 2) Column drilling machine Alzmetall AX3/SV, year of manufacture: 2000, drilling capacity (steel): 32mm, spindle stroke: 120mm, outreach: 293mm, column diameter: 115mm, table dimensions X/Y: 515mm/360mm, speed: 2250rpm, weight: approx. 300kg. 3) 2x metal circular saw Macc NTM 350, year of manufacture: 1998/2010, saw blade diameter: 350mm, cutting capacity: 120mm, weight: approx. 450kg. 4) Belt grinding machine Grit A/S GIS 150, year of manufacture: 2014, belt dimensions X/Y: 150mm/2000mm, motor power: 4kW, weight: approx. 100kg. An on-site inspection is possible. A package sale is preferred. Dcjdpfxoy Eqtio Aa Nsg