Used Torres & Valente 400 for sale (17,987)

Condition: like new (used), Year of construction: 2022, operating hours: 12,182 h, functionality: fully functional, machine/vehicle number: 259303, clamping force: 1,500 kN, screw diameter: 40 mm, clearance between the columns: 520 mm, displacement volume: 201 cm³, injection pressure: 2,000 bar, injection weight: 184 g, All-electric injection molding machine with Multilift, conveyor belt, and safety fence from current production Manufacturer: Arburg Type: 520 E 1500-400 Control: Selogica Year: 2022 Machine No.: 259303 Operating Hours: 12,182 h Injection Unit Injection unit/screw: 40 mm Injection volume: 201 ccm Injection weight: 184 g Heating power: 9.7 kW Heating zones: 5 Nozzle travel: 300 mm, 50 kN Injection pressure: 2000 bar Clamping Unit Clear column spacing: 520 x 520 mm Platen size: 695 x 695 mm Clamping force: 150 tons / 1500 kN Opening stroke: 450 mm Maximum platen distance: 700-1000 mm Minimum tool height: 250-550 mm Ejector stroke: 175 mm / Ejector force: 40 kN Weight: 7000 kg Extras • Thermoplastic processing • Cylinder liner, highly wear-resistant • Open nozzle 400 mm incl. heating band • Nozzle tip, flat • Servo-controlled nozzle travel • Electrical connection for needle-gate nozzle • Tool monitoring for ejector plate safety • Protective device, open at the top • Automatic central lubrication • Volume flow for hydraulic core pulls: 60 l/min • 2 x core pull control • 2 x blow-out • Electrical mold height adjustment • Cooling water with 6 free circuits • Machine-specific cooling circuits, programmable • Conveyor belt, electrically programmable • Selection unit, good/bad • Pneumatic maintenance unit • Equipment packages • Extended travel movements: • Increase in the number of travel stages and intermediate stop functions • Production control: • Production control with temperature setpoint control and programmable alarm cycles • Optimization/Operator Assistance: for adapting the machine to individual operational needs • Quality assurance: • Extends the standard quality monitoring and documentation: • Options for process analysis • Documentation with actual value protocol • Boosting (starting the hot runner nozzles with temperature increase) - free melting • Freely configurable page for start parameters (adjust cycles with other parameters instead of production parameters) • Socket combination: 1x CEE and 1 x Schuko • Socket distributor: (3x CEE and 3 x Schuko) • 12 x electrical heating circuits, each with 2 kW (230V) • Increased power for heating circuits 1-6 to 3.5 kW / 230V each • Connected Systems (CPU Ethernet prepared for 4th service - remote maintenance) • Robot interface Euromap 67 • Coloring interface • Multilift Select / Transversal design, 6 kg handling weight 3 CNC axes can be moved simultaneously / incl. pneumatic valve / vacuum equipment as well as C-axis (folding axis) pneumatic X, Y and Z-axis drives, servo-electric z-1400 mm / X-400 mm / y-800 mm / c-pneumatic folding axis 0-90° 13 Nm / Weight 1.2 kg Pgjdpfx Ajzn Av Iodksp with special equipment X-axis extended to 600 mm / Y-axis to 1000 mm / C-axis, end positions monitored Clearance height increased by 200 mm • Conveyor belt • Safety fence • 8 freely programmable inputs • 1 interface with 4 freely programmable inputs and outputs The machine is in top condition and can be inspected while powered on. From current production. The machine is available in our warehouse immediately. Free loading onto the buyer's truck or free delivery to the buyer's location against reimbursement of freight costs.

Condition: good (used), Year of construction: 1997, spindle bore: 62 mm, turning diameter over bed slide: 440 mm, turning diameter over top slide: 230 mm, turning length: 2,000 mm, total length: 3,500 mm, total width: 700 mm, total height: 1,500 mm, spindle speed (max.): 2,000 rpm, Centre lathe ZMM Sliven - CU 400 MACH-ID 9758 Make: ZMM Sliven Type: CU 400 Year: 1997 DBC Turning Length: 2000mm Swing over bed Ø: 440mm Swing over cross slide Ø:230mm Swing in the gap Ø: 620mm Spindle bore: 62mm Spindle power: 8kW Bed width: 360mm Tailstock spindle Ø: 70Ø Pgedpfx Ajzpwixjdkop Stroke pinole: 180mm Spindle taper: 5Mk Speeds / ranges: 2000Rpm Length: 3500mm Width: 700mm Height: 1500mm Weight: 2600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, mileage: 5,08,348 km, power: 294 kW (399.73 HP), first registration: 11/2017, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x2, wheelbase: 4,600 mm, fuel: diesel, color: green, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 8,600 mm, total width: 2,550 mm, total height: 3,140 mm, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, seat heater, traction control, trailer coupling, - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - Short cab - Manual - Auxiliary drive - Pump - Lane keeping assist - Fabric Number of axles: 3, Configuration: 6x2, Payload: 15930 kg, Unladen weight: 12070 kg, Gross vehicle weight: 28000 kg, Total tank capacity: 640 liters, Tow hitch, Trailer load, unbraked: 750 kg, Trailer load, center axle, braked: 14101 kg, Axle pin diameter: 40 DIN, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling capacity: 460 tons, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Color: Green, Heated mirrors, Lighting type: Halogen lamp, Lane keeping assist, Seat heating, Flashing lights, Engine power: 294 kW (394 Hp), Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Transmission type: ZF, Gears: 12, Power steering, ABS, ASR, Auxiliary drive, PTO type: 1, System length: 595 cm, Manufacturer of hooklift and cable system: VDL, Pump, Hooklift height: 128, Central locking, Number of seats: 2, Seat arrangement: 1+1, Seat covering: Fabric, Seat adjustment: Manual Transmission Transmission: ZF, 12 gears, Automatic Axle configuration Brakes: Disc brakes Axle 1: Tire size: 385/65R22.5; Steerable; Tire tread depth left: 6 mm; Tire tread depth right: 5 mm; Suspension: Leaf spring suspension Axle 2: Tire size: 315/70R22.5; Twin tires; Tire tread depth left inside: 5 mm; Tire tread depth left outside: 5 mm; Tire tread depth right inside: 6 mm; Tire tread depth right outside: 7 mm; Suspension: Air suspension Axle 3: Tire size: 315/70R22.5; Twin tires; Lift axle; Tire tread depth left inside: 5 mm; Tire tread depth left outside: 4 mm; Tire tread depth right inside: 4 mm; Tire tread depth right outside: 3 mm; Suspension: Air suspension Weights Unladen weight: 12,070 kg Payload: 15,930 kg GVW: 28,000 kg Functional Loading platform height: 126 cm Pump: Yes Condition Overall condition: very bad Technical condition: very bad Optical condition: very bad Damage: none Number of keys: 1 Identification License plate: 20-BKF-5 Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simply! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers Pgedpfxezp Elbe Adksp • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The assurance of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our...

Condition: good (used), mileage: 12,08,375 km, power: 294 kW (399.73 HP), first registration: 09/2017, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 5,700 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 10,200 mm, total width: 2,550 mm, total height: 4,030 mm, loading space length: 7,550 mm, loading space width: 2,500 mm, loading space height: 2,730 mm, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, seat heater, tail-lift, traction control, - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - Tail lift - Manual - Reversing camera - Space Cab - Lane keeping assist - Fabric Number of axles: 2, Configuration: 4x2, Payload: 8435 kg, Unladen weight: 11065 kg, Gross vehicle weight: 19500 kg, Total tank capacity: 750 liters, Unbraked trailer load: 750 kg, Braked trailer load, middle axle: 24000 kg, Fifth wheel coupling: Fixed, Number of differentials: 1, Winch pulling capacity: 118 tons, Suspension type: Air suspension, Cab type: Space Cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Color: Multi-colored, Heated mirrors, Reversing camera, Lighting type: Halogen lamp, Lane keeping assist, Seat heating, Engine power: 294 kW (394 hp), Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Transmission type: ZF, Gears: 12, Power steering, ABS, ASR, System type: ., Central locking, Seats: 2, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, Tail lift, Tail lift design: Rear door, Tail lift load capacity: 2000 kg, Tail lift manufacturer: Dhollandia, Tail lift material: Steel, Tail lift size: 200x252, Battery for loading ramp, TAILLIFT, Spare wheel, Spare wheel tread depth: 5% Transmission Transmission: ZF, 12 gears, Automatic Axle configuration Tire size: 315/70R22.5 Pgjdjzp Ekkepfx Adksp Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 11 mm; Tire tread depth right: 11 mm; Suspension: Leaf spring suspension Axle 2: Double tires; Tire tread depth left inner: 7 mm; Tire tread depth left outer: 7 mm; Tire tread depth right inner: 6 mm; Tire tread depth right outer: 7 mm; Suspension: Air suspension Weights Unladen weight: 11,065 kg Payload: 8,435 kg GVW: 19,500 kg Functional Tail lift: Dhollandia, Rear door, 2000 kg Loading platform height: 118 cm Maintenance APK (Technical Inspection): valid until 09.2026 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Identification Registration number: 21-BJX-1 Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands and models from various years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit a request via our website. Ask directly about our European warranty package.

Condition: used, CNC tool milling machine MAHO, type MH 400 E Machine no. 43072, year of manufacture 1989 Travel distances X: 400 mm, Y: 250 mm, Z: 375 mm Table size 700 x 270 mm Distance spindle nose / table max. 410 mm Tool holder ISO 40 with draw bolt type B Spindle speed 80 - 4000 rpm, 18 steps Podpfjh Ic Ufjx Adkjgp Feed rate 1-1500 mm/min, stepless Rapid traverse (X, Z and Y) 2.5 m/min. Quill travel, vertical 50 mm Spindle drive 2.2 kW Power connection 400 Volt, 50 Hz, 19 kVA - swiveling control panel with CNC path control PHILIPS 432 - LCD monitor VISCOTECH - hydro-mechanical tool clamping system - pivoting device for the vertical milling head - splash guard cabinet as a table enclosure with 3 fold-up doors - electrical control cabinet fixed to the machine - V24 (RS 232) interface for data transfer - 52470 operating hours, main switch on - fixed angular table - coolant system with coolant pump located next to the machine - central oil lubrication system Vogel - operator's manual, electrical wiring diagram Space requirement L x W x H 2250 x 1800 x 1850 mm Weight approx. 1.5 tons good condition

Condition: new, Working width: 400 mm Max element height: 350 mm Feed speed: 4-12 m/min Engine power: 2 x 3,6 kW Power: 400 V Manual height adjustment of the work unit Independent setting of the first and second work units Safety switch 2 brushes included Dimensions of the machine Lenght: 1700 mm Pgodpfjd Tqpysx Adkep Width: 1200 mm Height: 1650 mm We also offer a 600 mm wide brushing machine Valmec:

Condition: good (used), Marking prism, test prism, prism, angle prism, mounting angle, mounting prism, mounting cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Dimensions: see photos -Number: 2x prism block available Pgedpfxozn I Rks Adkop -Price: per piece -Dimensions: 400/300/H180 mm -Weight: 27.9 kg

Condition: used, empty load weight: 8,681 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2014, suspension: air, tire size: 385/55 R22.5, Equipment: ABS, | Schmitz refrigerated semi-trailer S3B | TK SLXe 400 refrigeration unit | Double-deck without beams – beams available upon request | Pallet box | Internal width 2.49m | Internal height 2.69m | Schmitz axles with disc brakes | Spare wheel holder, toolbox | Diesel operating hours: 28,394 h | Wall thickness 50mm | Subject to errors, typos, and prior sale. Pjdpexdn Hqsfx Adkegp

Condition: new, Year of construction: 2026, Filter Set for Oil Change in CORMAK LUFT 400 Screw Compressors A complete set of filters is essential when changing oil in CORMAK LUFT 400 screw compressors. Regular replacement of these filters helps maintain compressor efficiency, prolongs the life of key components, and ensures clean, reliable compressed air. Oil Filter – Keeps Lubricating Oil Clean The oil filter is crucial for maintaining the cleanliness of the lubricating oil circulating through the system. It removes contaminants and metal particles generated by normal wear. Clean oil ensures proper lubrication and cooling of moving parts and extends the life of the oil separator. Purpose: Remove impurities from lubricating and cooling oil Benefits: Pjdpfsycf Iqjx Adkjgp Protects bearings and screw elements Reduces friction and overheating Extends oil service life Air Filter – First Line of Defense The air filter is the compressor’s first defense against dust and airborne particles. It effectively captures solid particles, dust, and contaminants from the environment before they enter the screw block. Using a clean air filter prevents wear of compressing elements and minimizes the risk of contaminating the oil and compressed air. Purpose: Protect the screw block and the rest of the system from external contaminants Benefits: Increases compressor lifespan Maintains performance Reduces energy consumption Oil Separator Filter – Ensures High-Quality Compressed Air The oil separator filter is a key component of oil-lubricated compressors, responsible for separating oil droplets from compressed air. A high-quality separator ensures minimal oil content in the output air, which is critical for protecting pneumatic tools and production processes. Regular replacement prevents pressure drops and excessive oil consumption. Purpose: Achieve high-quality compressed air by effectively separating oil mist Benefits: Lower operating costs (reduced oil consumption) No contamination of pneumatic installation Stable pressure maintenance Why Choose Our Filters? Full Compatibility: Filters are precisely matched to the technical specifications of CORMAK screw compressors. High Filtration Quality: Filter media with large surface area and precise micron rating. Competitive Price: High quality at a cost-effective price, providing an economical alternative to OEM parts. Take care of your CORMAK compressor today!

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK screw compressors are a guarantee of quality and reliability. Our many years of experience in compressor sales have enabled us to develop models that offer an excellent price-to-performance ratio. This model is ideally suited for small workshops and small manufacturing companies. It features high air delivery (380 l/min) relative to its compact dimensions, allowing several devices to operate simultaneously. Its very low noise level (60 dB) makes working in the same room comfortable and unobtrusive. Are you looking for an efficient and reliable compressor for smaller workshops, service points, or hobby applications, while requiring a single-phase power supply? The CORMAK LUFT 400 screw compressor is the perfect solution. With a 3.0 kW motor and an impressive actual air delivery of up to 400 l/min, it provides a constant supply of compressed air necessary for the efficient operation of impact wrenches, blow guns, spray painting equipment, and other pneumatic tools. The LUFT 400 features a reliable and robust direct-drive transmission system, eliminating vibrations and the need for belt drive adjustments. This proven solution ensures stable operation and a long service life by providing direct power transfer from the motor to the screw airend. The maximum pressure generated by this screw compressor is 10 bar. Full control over operating parameters is provided by the intuitive MAM-series electronic control panel, giving access to key compressor information and increasing operational flexibility and process control. Permanent Magnet Motors (PM Motors) represent an innovative approach to electric drive technology, offering a number of significant advantages over traditional induction motors. An inverter (also known as a variable frequency drive, VFD) is an advanced electronic device that revolutionizes the operation of screw compressors. Its use allows smooth adjustment of the compressor motor speed according to the current demand for compressed air. High-quality CORMAK screw compressors, such as the LUFT 400 model, are based on technologically advanced screw airends that determine their efficiency and reliability. By combining proven solutions with innovation, CORMAK ensures that every airend is refined down to the smallest detail to meet the demands of even the most intensive operation. Pgjdpfx Adjza Al Ujkep In CORMAK screw compressors, such as the LUFT 400, a key element ensuring reliability and work optimization is the advanced MAM-series control panel. Designed for efficient compressed air system management, this controller enables continuous monitoring and rapid response to all operating parameters. TECHNICAL SPECIFICATIONS Motor power: 3.0 kW / 4 HP Power supply: 230V / 50Hz Air delivery at 0–6 bar: average 400 L/min Air delivery at 6 bar: 390 L/min Air delivery at 8 bar: 380 L/min Air delivery at 10 bar: 380 L/min Outlet connection (G): 1/2" Dimensions: 1130 × 520 × 1300 mm Weight: 170 kg

Condition: used, mileage: 1,43,000 km, power: 88 kW (119.65 HP), first registration: 03/2016, fuel type: diesel, overall weight: 3,500 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: mechanical, loading space length: 3,100 mm, loading space width: 1,850 mm, loading space height: 350 mm, Year of construction: 2016, Equipment: ABS, crane, NISSAN NT 400 35.12 / 4x2 TIPPER 3,10 m Imported / accident-FREE YEAR OF PRODUCTION: 2016 MILAGE: 143 000 km EQUIPMENT ? ABS ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? AIRCONDITION Pgedpezpdaqsfx Adkep ? ENGINE BRAKE ? TACHOGRAPH PLATFORM: 310 x 185 x 35 cm (L x W x H) CAPACITY: 3 500 kg TIRE SIZE: 195/70R15C WHEELBASE: 240 cm SUSPENSION: SPRING TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? : 6875

Year of construction: 2020, condition: new, Professional earth auger, Ø 400 x 1000 mm, with Hardox cutting edge. Psdpfx Adsdf R Rqskjgp Robust earth auger for our carrier unit, or upon request, also for other mounting systems. Item No.: MT18-EB-400-1000

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 KEY FEATURES 5-AXIS MACHINING HEAD "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL" XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE PROGRAMMING MATIC WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (stop inner side) mm 3,680 Working area Y-axis (max. loadable workpiece on rear stops) mm 1,680 Workpiece passage Z / Number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Traverse speed X-Y axes Pro-Speed m/min 85 Speed Z-axis m/min 30 INSTALLATION Installed power KVA 62 ÷ 82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL FEATURES CNC-controlled drilling and milling center in a portal design and worktable with workpiece supports, for performing: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Groove milling with disc cutters - general milling operations 3-4-5 axes MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel. It is reinforced by welded-in supports over the entire machine bed, making it extremely stable. The table design, with a large base, is the secret to ensuring lasting precision and stability. The machine layout enables the user to have an optimal workflow with a minimum of space requirements. The mobile portal beam is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via ball screw slides. On this mobile aggregate carrier, the working aggregate is in turn attached to prismatic, ground guides and ball screw slides. AXIS MOVEMENT The displacement of all axes takes place on prism linear guides with a large cross-section and ball screw shoes with a large contact surface, which ensure optimal sliding even at the highest speeds and accelerations. The precise and fast positioning of the moving portal (X-axis) is achieved by a pinion and rack with helical teeth. Ball screws with a large cross-section ensure the accurate positioning of the work unit along the moving portal (Y and Z axes). MOTORS, DRIVES AND INVERTERS The perfect mechanical dynamics and maximum positioning accuracy are controlled by the high-quality drives and brushless motors, which are designed to achieve a speed of up to 90 m/min while maintaining the best surface finish. CONTROL The control unit consists of a numerical control for the milling and drilling machine with "Xilog Maestro" graphical user interface on a Windows 7 operating system - LCD color screen 17 - Qwerty keyboard - Swiveling control panel - Machine operating interface with Xilog Maestro software Xilog Maestro Features Programming - parametric graphical programming - Import of DXF files (2D; the geometries "SPLINE", "POLYLINE 3D", lines or circle interpolation in three axes, linear in space, spiral in the selected plane - supported programming with graphics and syntax aids for drilling and milling operations - automatic optimization of drilling operations and tool changes - cycles - possibility of panel zero-point shift to perform drilling on inclined or curved panel sides Pgsdpfxoy Dta Se Adkjp

Condition: used, Year of construction: 1995, Technical details: turning diameter: 480 mm turning length: 800 mm total power requirement: 30 kW turning diameter over bed slide: 240 spindle bore: 65 mm disc turret: 12 fach rapid travel range: 20 / 10 m/min Pgedpfx Aezn N R Esdkjp weight of the machine ca.: 4,5 t dimensions of the machine ca.: 4 x 2,2 x 2,1 m with CNC TRAUB TX 8 H C-axis driven tooling, 6 positions 3,5 kW / 4000 rpm power chuck coolant attachment, chip conveyor diverse toolholders *

Condition: like new (used), Year of construction: 2019, clamping force: 1,000 kN, Equipment: documentation/manual, Clamping force: 100 t Screw diameter: 32 mm Shot volume: 103 cm3 Type: Horizontal Drive: Electric FANUC Roboshot α-S100iA : Basic Technical Specifications Mechanism: Double toggle Clamping force: 1000 kN / 100 tonf _(opt. 1250 kN / 125 tonf)_ Die height double platen: 150–450 mm _(opt. 150–550 mm)_ Die height single platen: 220–520 mm _(opt. 220–620 mm)_ Clamping stroke: 350 mm Locating ring: Ø 125 mm Tie bar spacing (H×V): 460 × 410 mm Platen size (H×V): 660 × 610 mm Min. mould size (H×V): 265 × 240 mm Ejector stroke: 100 mm Max. ejector force: 25 kN / 2.5 tonf _(opt. 60 kN / 6.0 tonf)_ 1. Clamping force: 1000 kN 2. Injection speed: 200 mm/s 3. Max. injection pressure: 2200 bar 4. Min./Max. mold height: 150 mm / 620 mm (extended) 5. Clamping stroke: 350 mm 6. Tie bar spacing: 460 × 410 mm 7. Ejector stroke: 100 mm 8. Screw diameter: 32 mm (103 cm³) 9. Screw/barrel: W/C (hardened, high wear and corrosion resistance, up to 350 °C, 30% GF) 10. Nozzle: Standard open R19D4 Control & Software (FANUC 31i-B CNC) 1. 15" LCD touchscreen 2. SI unit (kN, MPa...) 3. Password-protected screen lock 4. AI pressure profile trace function 5. AI metering control function 6. AI mold protection function 7. AI ejector protection function 8. Backflow monitor function 9. Precise metering 2, 3 10. Auto purge function 11. Extruder delay timer function 12. High precision V-P switch function 13. Injection unit temperature control and display 14. Automatic mold height adjustment 15. 2-stage ejection 16. Ejector delay function 17. Pre-ejection function 18. Optimal energy consumption function Standard Machine Equipment 1. Extended mold height 2. 4-circuit rotameter 3. Automatic mold height adjustment 4. Hopper slider 5. 3-color LED signal lamp 6. Automatic purge and material cleaning function 7. Plasticizing speed control 8. Decompression control additional function 9. Backflow monitoring function 10. AI mold and ejector protection 11. Mold protection output on moving platen 12. Energy consumption measurement function 13. Robot interface (Euromap 67) 14. Auto stop/shutdown mode 15. 3 independent air valves Pgedpjzktkzjfx Adkjp 16. 8 digital outputs, 11 digital inputs 17. Pre-injection / injection compression function 18. Cascade injection valve control (up to 8 valves) 19. USB and memory card output 20. Tool kit (standard tools + grease gun) 21. User manual (Hungarian) 22. Warning labels (Hungarian)

Condition: ready for operation (used), Year of construction: 1997, operating hours: 20,045 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 60,000 rpm, spindle speed (min.): 9,000 rpm, table load: 300 kg, overall weight: 4,500 kg, travel distance W-axis: 450 mm, Equipment: documentation/manual, For sale: used Hauser S35-400 coordinate grinding machine, year of manufacture 1997, in well-maintained condition with various accessories as shown in the photos. Travel paths: X-axis: 500 mm Y-axis: 300 mm W-axis: 450 mm Pedpfjyywb Ssx Adkjgp Z-axis feed rate, stepless: 0.5–14,000 mm/min Table size: 600 x 380 mm Maximum table load: 300 kg Control: GE Fanuc Series 16-M Dimensions (L/W/H): 4.25 m x 4 m x 3.25 m Total weight: 4,500 kg Machine is immediately available! Price includes loading onto truck!

Condition: good (used), Year of construction: 2013, functionality: fully functional, CNC vertical lathe / twin-spindle vertical turning machine Year of commissioning: 2013 Manufacturer: FAMAR S.r.l., Italy Voltage: 400 V / 50 Hz / 3P + N + PE Power supply: 90 kW / 160 A max. Pjdpfx Aszp Nr Sodkjgp Auxiliary circuits: 230 V AC PLC and general devices: 24 V DC CE marked: Yes Chip conveyor: Yes Workpiece conveyor system: Yes Concept: tandem machine with two independent machining stations Condition: used, regularly serviced, currently connected

Condition: used, mileage: 3,72,000 km, power: 294 kW (399.73 HP), first registration: 08/2015, fuel type: diesel, overall weight: 34,000 kg, axle configuration: > 3 axles, color: yellow, gearing type: automatic, Year of construction: 2015, Equipment: ABS, air conditioning, Scania P 400 / 8x4 TIPPER Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2015 ? MILAGE: 372 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? POWER STEARING ? POWER STEERING ? TACHOGRAPH CAPACITY: 20 000 kg Psdpfx Adsv Sn Saskogp TOTAL WEIGHT: 34 000kg WHEELBASE: 195/240/135 cm TIRE SIZE: 13R22,5 SUSPENSION: SPRING TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 83247

Condition: excellent (used), Year of construction: 1987, I sell the double knife veneer guillotine OMPEC OA 3200/400. Year 1987. Pgedpoyc I Tvofx Adkjp Cutting length 3200mm. Cutting height 80mm. Cutting width 20-450mm. Very good condition. Available immediately.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Please find below the details regarding the equipment available for sale: ARISA 400-ton Mechanical Press (S-2-400-160-FS) + DIMECO Feeder Line – Year 2001 Description: Complete ARISA 400-ton mechanical press for cutting/forming, with its automatic DIMECO feeder line (uncoiler/feeder). Technical Specifications: ARISA Press: - Brand / Model: ARISA S-2-400-160-FS (No. 400365947) - Year: 2001 | Standard: CE - Rated force: 4,000 kN (400 tons) - Stroke (Min / Max): 25 - 250 mm - Stroke rate: 25 to 100 strokes/min - Closed height: 485 mm | Slide adjustment: 200 mm - Power: 55 kW | Press weight: 65,000 kg (65 tons) ARISA Moving Table: - Model: Type 934.34 (No. 934345950) - Table dimensions (L x W): 1,700 × 1,300 mm - Max. tool load: 6,000 kg | Floor to table height: 1,025 mm DIMECO Uncoiling Line: - Includes: Single/double mandrel uncoiler + straightener/feeder + loop control - Max. coil capacity: 6,000 kg We remain at your disposal for any further information. Pgedpfx Aszpz U Sedkop BT MACHINES BUYING AND SELLING ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, total width: 1,640 mm, total length: 4,400 mm, total height: 1,740 mm, JAFA08 series, Model Number of heads: 8; Number of needles: 12; Stitches per minute: 1000; Cap speed (rpm): 1000; Head spacing: 400; Field depth: 500; Maximum tubular good size: 405x300; Maximum cap size: 70x360; Maximum travel: 400. The machine comes with a set of frames in 3 sizes and cap frames. Pgodpfxezp Hyaj Adkep A complete overhaul service was performed in 2024, and the machine has been regularly maintained.

Condition: good (used), Year of construction: 1999, functionality: fully functional, For sale: High-performance mechanical stamping and forming press, ARISA brand, model S-2-400-240-FS, with a force of 400 tons (4,000 kN), year 1999. This high-precision industrial machine is ideal for stamping, cutting, and combined stamping/cutting operations for industrial series production (automotive, household appliances, precision sheet metal work). Here are the complete technical specifications: General Information: - Brand/Manufacturer: ARISA S.A. (Spain) - Model: S-2-400-240-FS (S Series) - Manufacturing No.: 400365704 - Certification: CE Type Examination No. 0070 090C 0088 09 95 (INRS) - Total weight: 66,000 kg (66 tons) Capacities & Performance: - Rated force: 4,000 kN (400 tons) at 7 mm from the force point - Slide stroke: 25 - 250 mm - Closed height: 600 mm - Slide adjustment: 150 mm - Stroke rate: 25 - 100 strokes/min - Maximum flywheel speed: 500 rpm - Normal stop: Top Dead Center (TDC) - Time to reach safety distance: 0.126 s Dimensions & Tools: - Maximum dimensions of the upper tool (L x W): 2,300 × 960 mm - Maximum weight of the upper tool: 5,700 kg Power & Energy: - Installed power: 65 kW - Power supply: 380-500 V / 50 Hz (Three-phase, connection cable section 3.5 x 50 mm²) - Pneumatic pressure: 6 - 1 bar - Hydraulic pressure: 270 bar - Clutch-brake couplings: 30 cycles/min (Minimum-maximum pressure: 59 - 67 bar) Pgodpfxozpz Dme Adkep Included Equipment: - Damping cushion / upper pneumatic cylinders - Front transparent protective screens and side safety grilles - Mobile control panel on wheels and emergency stop panels - Part/scrap discharge conveyor - High-rigidity column frame Do not hesitate to contact us for further information or to request a quote.

Condition: used, Year of construction: 2002, x-travel 650 mm y-travel 650 mm z-travel 650 mm Control Siemens 840 D weight of the machine ca. 12 t Pgedpfxszmy Tuj Adksp

Condition: excellent (used), CATALOGUE NUMBER: 8007 Pgodszkryzjpfx Adkop TECHNICAL DATA - max. diameter of the main saw blade (without scoring saw) 400mm - max. diameter of the main saw blade (with scoring saw) 300mm - diameter of the saw blade arbor 30mm - max. cutting height for 400/300 saw blade, 120/70mm - spindle lock - main saw blade adjustable up/down and at an angle - saw blade guard - with side carriage - cutting length on the carriage 1600mm - cutting width with guide 1360mm - table dimensions 1100x1020mm - table dimensions with extension, including extension 2050x1850mm - with scoring saw - max. diameter of the scoring saw 100mm - diameter of the scoring saw spindle 22mm - scoring saw motor 0.55kW - 3 types of rotation speeds 2800, 4000, 5000 rpm - main motor 5.5kW - with brake - diameter of the dust extraction outlet 80, 120mm - dimensions (L/W/H) 2400x3350x1500mm - weight 870kg ADVANTAGES - Polish production - saw blade guard - with scoring saw - used saw, very good condition Net price: 11900 PLN Net price: 2833 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), Year of construction: 2005, ENGEL VC1800/400 POWER injection molding machine Basic data Manufacturer: Engel Model: VC1800/400 Power Type: Tie-bar-less hydraulic injection molding machine Control: Engel EC100 Year of manufacture: 2005 Operating hours: 110,000 h Country of manufacture: Austria Clamping unit Parameter Value Clamping force 4000 kN (400 tons) Opening stroke 1008 mm Ejector stroke 250 mm Ejector force 96.2 kN Injection unit (current configuration) Screw Ø60 mm Parameter Value Screw diameter 60 mm Max. injection volume 764 cm³ Max. injection weight PS approx. 695 g Max. screw speed 226 rpm Injection rate 283 cm³/s Injection pressure 1963 bar Max. injection pressure 2361 bar Nozzle stroke 500 mm Nozzle clamping force 110 kN The data for the injection unit comes from the original machine data sheet. Drive Parameter Value Pump motor power 45 kW Mounting plates The machine belongs to the Engel Victory 400T series. Typical plate dimensions for this size are approximately: Parameter Value Fixed platen approx. 1200 × 1100 mm Moving platen approx. 1200 × 1100 mm Max. mold height approx. 300–800 mm Exact transport dimensions - 7.5 × 2.2 × 2.7 m / 20 t. Pgodjzb Ivhepfx Adkep