Used Turbocharger for sale (132)

Condition: new, ATP-1000 tester can be successfully used in companies engaged in turbocharger repair, as well as in car repair services offering a wide range of repair works to determine the cause of turbocharger malfunction. It is also suitable for companies supplying electronic actuators. The tester checks the functionality of the actuator as a whole and its individual elements such as the position sensor and servomotor. Separate diagnostics of each element allows you to accurately determine the condition of the turbocharger actuator and detect a problem, if one exists. The ATP-1000 is easy to use and allows you to quickly check the condition of the actuator and its components. This has made it an effective tool for monitoring the functionality of actuators. Nedpfxjn E S T Uo Alhswh HIGHLIGHTS Testing of electronic actuators for turbochargers Programming (adaptation) of SIEMENS electronic actuators Testing of 12V DC motors up to 2A Testing of boost solenoids used in pneumatic systems Testing of electronic and pneumatic actuator position sensors Works with all common types of actuators and similar in principle of operation. Communication protocols: PWM, CAN, ADC, SENT. KEY FEATURES • Protection of the device by current 2A for 3 seconds • Automatic detection of DC motor polarity inside the actuator • Tooltip for color-coding the cable to the selected actuator type • Display position sensor readings as a percentage • Display of additional parameters of HELLA programmable actuators: firmware number, programmed angle value • Portable version for testing directly on the vehicle • USB control of actuators, when working together with the software of GEOMET-2000 turbo flowbenches. • Regular updating of the tester firmware СABLES Set of diagnostic cables for actuators 12 pcs. Set of diagnostic cables for position sensors 6 pcs. Cable set for uncommon turbines 11 pcs. USB cable 1 pc. Cable AC/DC 12V, 4A power supply 1 pc. !!!! If you are looking for an electronic actuator programmer, ask me.

Condition: new, Turbocharger core balancing machine DBST-20 Low-speed turbocharger core balancing machine meets the needs of turbocharger repair workshops. Machine is used for balancing common truck and passenger car turbos. It is multi-functional and universal, so it is suitable for many large turbochargers of special vehicles, railroad and marine turbines, and even for industrial turbochargers of gas and diesel power plants. The DBST-20 is used for balancing common truck and car turbochargers. It is multifunctional and universal, so it is suitable for many large turbochargers of special vehicles, railway and marine turbines, and even industrial turbochargers of gas and diesel power plants. This stand allows for the final balancing of cartridges due to the specific design features of large turbines. The stand is used for balancing turbocharger cartridges at low speeds, as well as for checking turbocharger cartridge oil leaks. This is a larger version of the DBST-10 model that our company has developed specifically for large turbochargers weighing up to 30 kg. HIGHLIGHTS High accuracy of determining the unbalance of the rotor (0.4 g ∙ mm / kg). Reinforced torsional vibration suspension - high accuracy of vibration transmission, quality balancing results. Mounting the cartridges on their standard surfaces (as on the engine) allows the installation of almost all turbochargers. Nwodpfxsn Nxcfj Alhjh Wide range of accessories and adapters for installing any kind of turbos. Includes adapters for installing turbochargers with lower oil inlet. Oil system with oil heating allows to recreate similar conditions to the real one during balancing. 3-stage system of oil filtration allows to eliminate an unbalance directly on the machine by portable grinders. The measuring system displays the balancing process in real time and monitors the rotor unbalance behaviour on the screen to achieve the best possible result. Rotor adjustment and machine calibration are performed by the operator, ensuring maximum machine sensitivity at all times. Safe turbo shaft speed allows risk-free quality running-in of assembled cartridges, which significantly increases cartridge reliability after repair. KEY FEATURES • High accuracy 2 plane balancing • Truck and car turbocharger balancing • Any turbocharger can be installed • All type turbocharger adapters included • Quick and easy turbo core installation • Balancing speed up to 10 000 rpm • Fast oil heater and temperature regulation • 3-stage oil filtration • Real-time unbalance measurement • Calibration of the machine by the operator • Industrial fanless touch screen PC control system • Creation and printing of reports on turbocharger balancing SPECIFICATIONS Maximum turbocharger weight 30 kg Maximum turbocharger diameter 300 mm Maximum turbocharger length 300 mm Maximum rotation speed 10 000 rpm Minimum achievable residual specific imbalance, 0,4 g mm/kg Pneumatic system operating pressure 0,6 – 0,8 MPa Power supply 220V, 1Ph, 50Hz Power input 1,5 kW Dimensions 1120 х 780 х 1350 mm Weight 285 kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 10 kg, input voltage: 230 V, year of last overhaul: 2023, SCHENCK Highspeed Special Balancing Machine Type 110 MBRS for turbocharger core assemblies a for service, repair shops as well as research and development departments. The correction of the static unbalance can be performed inside the balancing machine on the compressor wheel side directly on the machine. Max balancing speed 250,000 rpm Nwjdpfxsq I Rz Rj Alheh

Condition: excellent (used), Year of construction: 2014, workpiece weight (max.): 16 kg, input voltage: 230 V, year of last overhaul: 2025, SCHENCK TBsonio High Speed Balancing machine for turbocharger core assemblies Nsdpfjq Nin Ujx Alhswh

Condition: excellent (used), LDS Shaker Special We are offering an LDS Shaker Special for sale. Shaker Vibration testing: Nedozd Sldepfx Alhowh Shaker – Type V870-640T Testing for vibration and shock resistance during use and transport. Determination of vibration-related material parameters. Application areas: engine components, exhaust turbochargers, vehicle parts, electronic assemblies. Type: V870-640T Condition: used Scope of supply: (See images) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: new, TURBO-BOOST-TEST turbocharger boost testing bench allows for professional turbocharger calibration and performance evaluation. The test bench can be used in turbine tuning and refinement, in the manufacture of hybrid turbines, to test changes in turbine performance after tuning. Our test benches are advanced systems for turbocharger tuning and testing in dynamic mode. Its provide turbocharger testing under near realistic operating conditions, ensuring full process control and detection of any potential problems, including oil leaks. HIGHLIGHTS • Complete finish testing and tuning of automotive turbochargers for engines up to 3 liters • Dynamic turbocharger testing • Installation on the regular surfaces of fastening • Running in and check on an oil leak • Tuning of electronically driven turbos is done by connecting to an external tester ATP-3000 • Installation of turbochargers of any design KEY FEATURES • More than 2000 turbo references database • Calculate turbocharger performance; • Plot supercharging vs. inlet and outlet flow graph; • Generating the resulting graph; • Testing of actuator performance: vacuum, pneumatic and electric types; • Diagnosis of servo-drives of electric actuators (optional); • All measurements are done in real time. • Calibration of the test bench before starting work • N75 valve testing function • Built-in blower pump to create a constant airflow • Self-developed Boost Test software. • Creation and printing of reports on the tuning process. • Self-diagnostics SPECIFICATIONS Maximum rotor speed 99 000 rpm Njdpettg S Usfx Alhowh Maximum air flow rate of compressor 110 m³/min Maximum pressure of compressor 900mbar Maximum vacuum created by the vacuum pump -800mbar Power supply 380V, 3Ph, 50Hz Power input 6 kW Dimensions 1330 х 770 х 1440 mm Weight 265 kg

Condition: used, functionality: limited functionality, Year of construction: 2015, operating hours: 4,399 h, load capacity: 5,000 kg, lifting height: 3,000 mm, fuel type: diesel, mast type: simplex, construction height: 2,440 mm, drive type: Diesel, Diesel forklift ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for operation and fully functional Technical condition: poor Description: Turbocharger defect Heater, full cab, air conditioning Njdpfxew Sz Rae Alhewh

Condition: excellent (used), Year of construction: 2012, operating hours: 5,655 h, functionality: fully functional, overall weight: 2,860 kg, fuel type: diesel, color: yellow, axle configuration: 2 axles, empty load weight: 2,860 kg, gearing type: hydrostat, number of seats: 1, drive condition: 80 %, chain condition: 80 %, tire condition: 80 %, Equipment: all wheel drive, gripper hydraulics, hydraulics, rubber tracks, An authorized SUBARU dealer in Łaziska Górne has a Vermeer D9x13 Series 2 horizontal directional drilling rig from 2012 for sale, with 5600 operating hours. We specialize in importing and selling Vermeer and Ditch Witch drilling rigs. A special price is offered for self-collection from Denmark. Once the machine is delivered, refurbished, and fully serviced, the price will be a few thousand euros higher. The machine comes directly from Denmark, from its first owner. It is a compact and efficient HDD drilling rig, ideal for directional drilling for fiber optic, water, gas, power, and sewer installations, even in areas with limited space. Technical specifications of the Vermeer D9x13 Series 2: Engine: Kubota V1505T Diesel, turbocharged Engine power: 47 HP / 35 kW Push/pull force: 40 kN / 9000 lbs Maximum torque: 1763 Nm Spindle speed: up to 220 rpm Maximum carriage speed: 42.7 m/min Drilling fluid pump: 34.1 l/min or 56.8 l/min, depending on the version Maximum drilling fluid pressure: 51.7 bar Drilling fluid tank on the machine: 94.6 l Drill rods: Vermeer Firestick, length 1.8 m, diameter 42 mm Machine length: 3.80 m Transport width: 0.90 m Maximum working width: 1.08 m Height: 1.75 m Weight with drill rods: approximately 2860 kg Thanks to the extendable tracks, the machine is very stable during operation and, at the same time, exceptionally narrow during transport and operation in confined spaces. Additionally, a drilling fluid system is available: We also have a small Ditch Witch FT5 drilling fluid system/mixer from 2021 available for this drilling rig, which is a perfect match for this model and provides a practical set for small to medium-sized drilling projects. Ditch Witch FT5 – basic data: Year of manufacture: 2021 Tank capacity: approximately 757 liters / 200 gallons Maximum flow rate to the drilling rig: approximately 68 l/min Engine: Honda GX160, gasoline Engine power: approximately 5.4 HP Dimensions: approximately 185 × 81 × 136 cm Weight: approximately 182 kg Nwjdpfxozfgt Se Alhsh It is possible to purchase the drilling rig alone or as a set with the Ditch Witch FT5 drilling fluid system. We specialize in the professional sale of construction, municipal, and specialized machinery. We are also an Authorized Subaru Dealer. We can arrange transport to the desired address throughout Poland. For more information, photos, videos, and technical details, please contact our sales representatives. We invite you to contact us.

Condition: used, Year of construction: 2026, operating hours: 380 h, TECHNICAL SPECIFICATIONS KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production run. Acceptance/initial registration is from 2026. GENERAL DESIGN ? High-performance tracked vehicle for professional use in challenging terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER PK 23002 SH E Power Link Plus loading crane ? Suitable for assembly, lifting, and transport work in difficult terrain ? Can be used on peatlands, forest paths, routes, mountainous regions, and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Can turn on the spot OFF-ROAD CAPABILITIES ? Climbing ability up to 60% ? Side slope up to 40% ? Wading depth up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive surfaces ? Ideal for work off paved roads CAB ? Safety cab with ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen control panel ? Rear view camera ? LED work lights ? GPS telemetry and fleet management system CRANE Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic articulated boom loading crane ? Endless slewing ring ? Hydraulic six-stage extension boom Performance data ? Lifting moment: 21.5 mt (215 kNm) ? Maximum lifting capacity: approx. 6,200 kg ? Maximum hydraulic reach: approx. 17.10 m ? Lifting capacity at maximum outreach: approx. 890 kg ? Precise load positioning thanks to sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection system ? HPSC stability monitoring system ? Active vibration damping ? Hydraulic winch ? Four-point outriggers ? Additional hydraulic connections for attachments ? LED work lights on the crane Nwjdpfx Ajzhhmfjlhoh AREAS OF APPLICATION ? Overhead power line and electricity pole construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction ? Specialized forestry work ? Work in peatlands and nature reserves ? Disaster control and rescue operations ? Assembly and lifting work in difficult-to-reach terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload with excellent off-road performance ? Safe working even under the most challenging conditions ? Economical alternative to mobile cranes in difficult terrain ? High flexibility for energy suppliers, network operators, and specialized civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with the mounted PALFINGER PK 23002 SH E Power Link Plus combines maximum off-road capability with powerful crane technology. Due to its extremely low ground pressure, high payload, and a reach of over 17 meters, the machine is particularly suitable for lifting, assembly, and transport tasks in areas that cannot be reached with conventional truck cranes or construction machines.

Condition: new, mileage: 10 km, power: 110.32 kW (149.99 HP), fuel type: diesel, wheelbase: 3,400 mm, fuel: diesel, fuel tank capacity: 90 l, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 4, number of seats: 3, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, central locking, full service history, non-smoking vehicle, onboard computer, power assisted steering, start-stop system, tachograph, traction control, truck registration, ISUZU M30H 150 HP Permissible gross weight: 7,500 kg Wheelbase: 3,365 mm Standard Equipment • AGR - DPD - SCR • 7-inch multifunction display • Exhaust brake • Electrically adjustable and heated exterior mirrors • Immobilizer • Seat belt warning system • Headlamp washers • Manual air conditioning • Electric parking brake • Air-suspended driver’s seat • Front and rear fog lights • DAB+ radio - Bluetooth • USB charging port • Central locking with remote control • Multifunction steering wheel • Driver and passenger airbags • Power windows • Hill Start Assist (HSA) • Bi-LED headlights and taillights • Headlight range adjustment • Automatic headlights • Warning lights in case the driver's cab is not properly secured against tilting • Two-way adjustable steering wheel • Speed limiter (90 km/h) • Start-stop system • Removable cup holder • Spare wheel ENGINE ISUZU 4JZ1E6N diesel engine, 4 cylinders, 16 valves. Common-rail injection with DENSO i-Art direct injection. Turbocharged with electronically controlled VGS turbocharger, intercooler, and variable exhaust valve timing. DISPLACEMENT: 2,999 cm³; OUTPUT: 110 kW (150 HP) at 2,800 rpm; MAXIMUM TORQUE: 375 Nm at 1,280 – 2,800 rpm. EMISSION CONTROL: EURO VI OBD-E. Safety Package 2 ABS: Anti-lock braking system DWS: Front collision warning system AEBS: Advanced Emergency Braking System ASR: Traction control system AEBS for pedestrians and cyclists: Automatic emergency braking with pedestrian and cyclist detection EBD: Electronic brakeforce distribution FVSN: Following vehicle warning system Intersection warning: Blind spot monitoring when turning EVSC: Electronic stability control DDAW: Driver attention warning system AEBS: Automatic emergency braking system LDWS: Lane departure warning system RM: Reversing camera TSR: Traffic sign recognition MOIS: Motion detecting system BSIS: Blind spot information system TPMS: Tire pressure monitoring system Tanks: 100 l, 14 l AdBlue® Nwodpozfxk Ajfx Alhsh TRANSMISSION AND RATIOS: Manual, 6-speed Capacity: 3 persons Axles: 2, rear drive axle with twin tires Brakes: Front and rear: 310 x 42 mm internally ventilated disc brakes with asbestos-free pads. Hydraulic system with brake booster and ABS to EC standards, separate brake circuits on both axles. Drum parking brake on the propeller shaft. Suspension: Front and rear: parabolic springs with integrated rubber stops, double-acting hydraulic telescopic shock absorbers. Front and rear stabilizer bars. Electrical system: 24 V – alternator 90 A – 2 x 90 Ah batteries (F-Space: 2 x 70 Ah) BODY TECHNICAL DATA Hooklift system: 90 cm City System Marrell Length: 3,300 mm Payload: up to 4,000 kg EQUIPMENT Container protection: Internal hydraulics Hydraulic manifold Hydraulic pump Oil tank Wide rollers for container stability Stainless steel hook frame Steel construction sandblasted and epoxy primer coated Marker lights Work platforms Work light 1 pc. Additional headlights Rear lamp cover frame No hidden charges with us: - Transfer costs: 0 - Documents: 0 - COC: 0 - First inspection: 0 Financing or Leasing available FURTHER INFORMATION: Premium Kfz Outlet GmbH Fichtenhöhe 3 02829 Schöpstal OT Ebersbach Germany We are at your service: ONLINE SALES wir sprechen deutsch we speak English говорим по русски mówimy po polsku

Condition: used, mileage: 39,900 km, power: 118 kW (160.44 HP), first registration: 11/2021, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,500 mm, loading space length: 3,800 mm, Equipment: ABS, air conditioning, central locking, soot filter, Chat with us now via WhatsApp: Get in touch quickly and easily with our sales consultant. Please note!!! Sales are preferably made to commercial customers. Internal ID number: [3291] ----Optional extras: * 12–64 months warranty (valid throughout the EU) Njdpfx Aoy Rdbtslhswh * New inspection * New TÜV & emissions test * Nationwide delivery * Financing possible even without a down payment * Spring offer: Upon request and for an additional charge of only €999, the towing capacity can be increased to up to 3,500 kg (vehicle and manufacturer dependent). ----Vehicle highlights: * 19% VAT can be shown separately * German vehicle * Regularly maintained * Accident-free * Euro 6 standard * Ready for immediate use * Maxi high + long * Roof rack with ladder system * Tool shelf in the cargo area * Automatic climate control * Cruise control * Reinforced springs * Reversing camera * LED daytime running lights * Comfort equipment * 3 seats * Trailer hitch = 3,500 kg possible Special equipment: Storage compartment in the headliner of the cab, storage compartments: luggage net on the rear doors, Entry package, fuel tank: 90 liters, cargo area partition, spare wheel (including spare wheel holder) Additional equipment: Airbag for driver, brake assistant, driving assistance system: adaptive load control (LAC), rear wing doors without glazing, body/structure: large-volume box van with overhang, crankcase ventilation with heating, removable cargo area partition (without window), engine 2.3 liters - 118 kW turbocharged diesel Multijet, wheelbase 4035 mm, tire repair kit, low emissions according to Euro 6d-TEMP emission standard, sliding door to the cargo/passenger compartment on the right, seats in the cab: double passenger seat, start/stop system, tinted glazing, lining in the cargo/passenger compartment: halfway up (to seatbelt height) ----Do you want to lease or finance? We offer attractive deals – even without a down payment! Please feel free to contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 a.m. – 6:00 p.m. Sat: 9:00 a.m. – 2:00 p.m. ----Note: All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typos, and prior sales are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances. We prefer to sell vehicles with a mileage of over 50,000 km or older than 3 years to our commercial customers.

Condition: used, color: other, Year of construction: 2008, operating hours: 6,178 h, Number of cylinders: 6 Empty weight: 19.450 kg Height: 285 cm Wheelbase: 330 cm Serial number: H60672 Chassis number: KMTWA095C79H60672 Hours: 6,178 hours Power: 140 kW Curb weight: 19,450 kg Engine/Type: Komatsu SAA6D107E-1 Nwjdpfx Ajzhig Helheh Number of cylinders: 6-cylinder, turbocharged, water-cooled Displacement: 6.69 liters. Maximum torque: 963 Nm at 1,500 rpm. Bucket capacity: approximately 3.4 m³ Length (with bucket): 8,300 mm. Width: approximately 2,750 mm. Height: approximately 3,400 mm. Wheelbase: 3,300 mm. Dump height: 2,850 mm Maximum speed: 40 km/h. Drivetrain: 4x4, powershift transmission (4 forward / 4 reverse) Tires: Typically 20.5R25 Fuel tank: approximately 300 liters Includes excavator bucket Online auction of construction, agricultural and industrial machinery (including. JOHN DEERE / DEUTZ-FAHR / CASE / NEW HOLLAND tractors, VOLVO / CATERPILLAR / HITACHI / KOMATSU excavators, MANITOU / GEHL / GIANT / KUBOTA wheel loaders and skid steer loaders, JLG and TEUPEN aerial platforms, DAF / VOLVO hook-arm trucks, CATERPILLAR / CUMMINS / FG WILSON power generators, BOMAG / HAMM rollers, SINOBOOM scissor elevator, various agricultural machinery and yard and workshop equipment, etc.), with most of the lots located in our own depot in Deinze, Belgium. The online auction opens Wednesday 24 June and closes Tuesday 7 July. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Monday 6 July Pickup day is on: - Tuesday 14 July Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: new, functionality: fully functional, Year of construction: 1925, operating hours: 1 h, load capacity: 1,200 kg, lifting height: 5,280 mm, free lift: 1,995 mm, fuel type: diesel, power: 18.4 kW (25.02 HP), motor manufacturer: Perkins 403J-11T, turning radius (outer): 1 mm, tire condition: 100 %, overall weight: 2,900 kg, empty load weight: 2,900 kg, total width: 1,560 mm, color: yellow, Equipment: cabin, GG613 Telehandlers The GG613 is a modern, compact telescopic loader that excels in demanding tasks across construction, agriculture, and industry. It delivers high power, precise control, and reliability, ensuring maximum performance in all conditions. Perkins 403J-11T Engine – Power and Efficiency Powered by a three-cylinder, turbocharged Perkins 403J-11T engine with a displacement of 1.1L (18.4 kW at 2800 rpm), this engine meets emission standards and delivers optimal torque with minimal fuel consumption. Hydrostatic Drive and PWG Hydraulics The hydrostatic drive system combined with the PWG hydraulic pump offers a flow rate of 28.6 l/min (optional 41.6–70 l/min) at a pressure of 225 bar, providing smooth and precise control for efficient management of attachments. Lifting Height and Operating Capacity The GG613 telehandler provides a maximum lifting height of 5280 mm with a standard bucket and 4981 mm with pallet forks, making it an ideal solution for loading and transporting materials without the need for additional equipment. Stability and Operator Comfort Thanks to its low center of gravity and wide wheelbase, the machine offers excellent stability and safety. The operator’s cab is ergonomically designed, delivers outstanding visibility, and features hydrostatic power steering for precise maneuvering on challenging terrain. Efficiency and Economy Equipped with a 33L fuel tank and a 36L hydraulic oil tank, the machine supports long periods of operation without frequent refueling. The 0.5 m³ bucket capacity and a maximum lifting capacity of 1200 kg ensure high productivity and operational efficiency. Compact Dimensions and Maneuverability Maximum load: 1200 kg Operating weight: 2900 kg Engine: Perkins 403J-11T Number of cylinders: 3 Engine type: Water-cooled, turbocharged, four-stroke Rated power / speed: 18.4 kW / 2800 rpm Nwedpfx Aljxr Rwbjhjh Displacement: 1.1 l Drive type: Hydrostatic axle drive Axle: Planetary drive on steering axle Hydraulic system: PWG Pump type: Gear pump Flow rate: 28.6 l/min (optional 41.6–70 l/min) Pump pressure: 225 bar Fuel tank capacity: 33 l Hydraulic oil tank capacity: 36 l Bucket volume: 0.5 m³ Total attachment tilt angle: 148° First gear – speed: 0–8 km/h Second gear – speed: 0–20 km/h Tyres: 10.0/75 - 15.3 Overall length (with standard bucket): 3944 mm Overall length (with pallet forks): 4081 mm Overall length (without standard bucket): 2977 mm Hinge point bucket to axle center: 450 mm Wheelbase: 1922 mm Rear overhang: 427 mm Cabin height: 1995 mm Maximum working height (with standard bucket): 5280 mm Maximum working height (with pallet forks): 4981 mm Maximum boom pivot height: 4537 mm Load height with extended boom: 4163 mm Load height with retracted boom: 2949 mm Load height (with pallet forks): 4301/3087 mm Tipping height with extended boom: 3566 mm Tipping height with retracted boom: 2352 mm Working distance: 476 mm Maximum reach at load height: 2289/932 mm

Condition: new, functionality: fully functional, first registration: 06/2026, fuel type: diesel, color: red, fuel: diesel, operating hours: 3 h, Equipment: air conditioning, all wheel drive, car registration, differential lock, hydraulics, trailer coupling, LX 401 CAB Nsdpozf Dz Hofx Alhewh KUBOTA 4WD TRACTOR LX401 CAB, DEMONSTRATION UNIT, LIKE NEW; NOT REGISTERED! CURRENTLY WITH 3.5 OPERATING HOURS With comfort cabin, Including 5-year manufacturer's warranty (up to 2,000 operating hours) Engine: 1,498 cm³, 4-cylinder Kubota diesel engine, CRS, EGR, DPF, emission stage V, Engine power according to EC 120 29.3 kW (39.8 hp), 4-valve technology, turbocharger, dual flywheel, fuel tank 32 l Transmission: 3-stage hydrostatic transmission, max. speed 30 km/h, automotive driving system, dual flywheel, cruise control 4WD: Engageable all-wheel drive, bi-speed steering system, rear differential lock Comfort: flat driver platform, fully hydraulic power steering, air-suspended comfort seat, 2 USB ports, storage compartment, cup holder, adjustable steering column, external rear PTO control Cabin: Spacious cabin, integrated 4-post design, effective heating, air conditioning with recirculation mode, LED work lights front and rear, rear window heating, rear window wiper and windshield wiper with washer system, 12-V socket, radio preparation, fender extensions rear PTO: Rear PTO 540 rpm, mid-mount PTO 2,500 rpm, independently switchable Hydraulic system: Flow rate 20.4 l (working hydraulics), max. working pressure 160 bar, rear three-point linkage Cat. I, lifting force at the lower link end 1,150 kg, standard front equipment: 3 functions (single lever control with 1x control valve double-acting, 1x control valve double-acting with float position, changeover valve 3rd function), 6x hydraulic couplings (SVK according to ISO 7241-1-A BG3) Standard rear equipment (electrically switchable): 2 functions (1x control valve double-acting, 1x control valve double-acting with float position), 4x hydraulic couplings (SVK according to ISO 7241-1-A BG3) Drawbar Permissible unbraked trailer load: 1,500 kg Permissible braked trailer load: 3,500 kg Permissible vertical load: 500 kg Dimensions Overall length: 2,983 mm Overall height (depending on tires) 2,145 – 2,175 mm Wheelbase: 1,695 mm Weight (ROPS/cabin) (depending on tires): 1,015/1,185 kg Max. front axle load (depending on tires): 1,080 kg Max. rear axle load (depending on tires): 1,920 kg Permissible total weight (depending on tires): 2,400 kg (with turf tires) IN ADDITION: - DAB+ radio with Bluetooth - Antenna splitter - Municipal tires front 220/55R14 - Municipal tires rear 320/70R20 - Front three-point linkage CAT 0 / coupling triangle - Front PTO cabin Oil-bath running gear with multi-disc clutch, shiftable under load, Nominal speed 1,000 rpm, standard profile 1 3/8", 6-piece, direction of rotation left when viewed in the direction of travel - Headlights at the top, for winter service - Rotating beacon LED - Fender set front 215 mm - Fender extensions rear - Height-adjustable drawbar - Automatic drawbar for height-adjustable drawbar - SAFETY EQUIPMENT KIT Consisting of: multipurpose lamp, fire extinguisher, combination bag with first aid kit, EC warning triangle, warning vest according to EN 20471 Class 2 Changes, typing errors, errors and prior sale reserved. All information is provided without guarantee. The sale is made with exclusion of any warranty.

Condition: used, mileage: 2,39,000 km, power: 120 kW (163.15 HP), first registration: 05/2011, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 06/2027, color: black, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 5,910 mm, total width: 1,993 mm, total height: 2,435 mm, Year of construction: 2011, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), * VW Crafter 35 panel van L2 H1 with 3 seats - tow bar - 3 seats - immediately available - * Diesel - Engine capacity: 2,461 cc - 120 kW / 163 hp - Euro 5 - Green emissions sticker * 6-speed manual transmission - Wheelbase: 3,665 mm - Load compartment with wooden lining & carpet * All 5 injectors replaced NEW at 223,000 km, turbocharger NEW at 220,000 km, rear brake pads NEW at 236,000 km, front axle brakes completely NEW at 230,000 km * German vehicle - German registration documents - * Vehicle immediately available and ready for pick-up - * Please arrange an appointment for viewing - Nwedpfexpb Daox Alhoh * Contact person: Mr. Andreas Vogel * The information provided online is a non-binding description. * They do not constitute guaranteed features. * The seller is not liable for typographical or data transmission errors. * Subject to change, errors, and prior sale. Special equipment: Audio system RCD 2001, outside temperature display, wooden flooring in the cargo area, spare wheel in operational condition, double passenger seat in driver's cab, high-grade wooden trim in cargo/body area Further features: Storage trays/compartments above windscreen, driver's airbag, traction control (ASR), rear right entry handle on rear pillar, driver assistance system: brake assist (HBA), rear wing doors without glazing, body/chassis: standard panel van, body variant: standard roof, fuel tank: 75 liters, high cargo partition wall without window, engine 2.5 L - 120 kW TDI DPF, parking light switch, wheelbase 3,665 mm, low emissions according to Euro 5, right sliding door in cargo/passenger area, seat cover/upholstery: fabric, driver's seat height-adjustable, front stabilizer, permissible total weight 3.5 t, additional brake light

Condition: excellent (used), functionality: fully functional, machine/vehicle number: WDB9062531N760410, mileage: 2,22,900 km, power: 139.74 kW (189.99 HP), first registration: 06/2018, fuel type: diesel, empty load weight: 2,540 kg, overall weight: 5,000 kg, tire size: 205/75R16C, tire condition: 50 %, axle configuration: 2 axles, next inspection (TÜV): 02/2027, fuel: diesel, fuel tank capacity: 100 l, color: black, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel-air, Year of construction: 2018, number of beds: 1, Equipment: ABS, Bluetooth, EBS, USB port, additional headlights, air conditioning, airbag, central locking, cruise control, fog lights, full service history, hill-start assist, lane keeping assist, navigation system, onboard computer, parking heater, power assisted steering, power mirror, seat heater, soot filter, spoiler, start-stop system, tachograph, tire pressure monitoring, traction control, trailer coupling, For sale is a Mercedes Sprinter 519 CDI DOKA with a sleeper cab. The Sprinter is very well-equipped with many extras and has no defects. The main inspection was recently carried out. It has a fifth-wheel coupling for a semi-trailer, and the trailer is included in this listing. The Mercedes Sprinter is in very good technical and visual condition and has been regularly maintained according to the Mercedes service schedule. The vehicle has 2 additional doors on the left and right sides. At 431,742 km, a brand new engine was installed at Mercedes. The transmission, clutch, and turbocharger were also recently replaced at Mercedes. The vehicle has no outstanding maintenance. The engine is the highly sought-after 6-cylinder engine from Mercedes-Benz. BRAND NEW ENGINE INSTALLED!!!! Permissible total weight: 8.75t !!! Engine mileage: 222,900 km Vehicle mileage: 654,600 km Vehicle data Sprinter: - First registration: 29.06.2018 - VIN: WDB9062531N760410 - MOT valid until: 02/2027 - Euro 6 - Engine power: 190 hp Nwedpeyrcutefx Alheh - Tire size: 205/75R16C - Manual transmission - Gross vehicle weight: 5000 kg - Unladen weight: 2540 kg - Payload: 2460 kg - Digital tachograph - Auxiliary heater - Air conditioning - Seat heating - Radio with navigation - Cruise control - Lane keeping assist - Roof spoiler - Spoilers on the sides (left + right) - Bed - Compressor - Xenon headlights The trailer from Fahrzeugbau Beck is a tautliner with an Edscha canvas and curtain side. The trailer has a Palfinger loading platform with a payload of 1000 kg, including a remote control, an underbody box, and work lights. Vehicle data trailer: - Type: MSHP 9722 01 - First registration: 28.08.2018 - VIN: W09SPL107JLB85003 - MOT valid until: 05/2026 - Tire size: 235/75R17.5 - Gross vehicle weight: 6600 kg - Unladen weight: 2786 kg - Payload: 3814 km - External dimensions: 9780 mm long, 2320 mm wide, 3750 mm high - Internal dimensions: 9700 mm long, 2250 mm wide, 2500 mm high - Palfinger loading platform type: MBB C 1000L with remote control - Edscha canvas - Sliding tarpaulin - Work lights - Storage box Offer subject to change; errors, modifications, and prior sale reserved. Financing possible upon request. We will also be happy to arrange customs clearance for you. Opening hours: Mon-Fri 8-14 hrs or by appointment. Price is NET/negotiable. An invoice with VAT will be issued upon sale. Location of the vehicle: Im Gewerbepark 11 99441 Umpferstedt

Condition: used, mileage: 1,74,600 km, power: 130 kW (176.75 HP), first registration: 03/2012, overall weight: 15,000 kg, fuel type: diesel, color: orange, axle configuration: 4x2, maximum load weight: 6,200 kg, empty load weight: 8,800 kg, tire size: 10 R 22,5, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, differential lock, fog lights, low noise, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: en route / in transit, short cab, 1 comfort seat, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, switch 8, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, raised exhaust, differential lock, fog lights, rotating beacon, leaf-air suspension, low-noise G1, U-protection, side aluminum fender, sweeping brush, sunroof, green environmental badge. Superstructure: Bucher sweeper, type CityFant 6000, with sweeping brush on the right, approx. 6 m³, and JohnDeere auxiliary engine 4045 TF 63kW, right-hand drive. Vehicle operating hours: 19277h, sweeper operating hours: 11366h! Sweeper superstructure: Bucher CityFant 6000 FB Twin Engine Auxiliary engine type: JohnDeere 4045 TF exhaust turbocharger 63kW Rear door in stainless steel, brush plate 700mm, roller 400mm, suction hose at the rear 200mm, manual water valves in the cab, road construction version with reinforced suction hoses, LED flashing and warning lights. All information is provided without guarantee as the vehicle is currently en route! ACCESSORY INFORMATION IS PROVIDED WITHOUT GUARANTEE, subject to change, prior sale, and errors! Nsdpfezdvfbjx Alhewh

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, Flowbench Machine FEATURES BENEFITS Compact design Integrated air supply Utilises your existing workshop air supply, 7 bar, clean dry air requirement It has the ability to measure digital and analogue wastegates on all vehicle models. With its 23.5-inch full touch screen and simple interface, it is very easy to use. Can be used without an internet connection Built-in database of more than 1900 references Flow adjustment possible for all types of turbochargers up to 200 kg/h Calibration test plates provided to easily verify machine accuracy All types of turbochargers can be easily connected with 6 adapters included as standard. G3 REA-Master (USB) Controller Built-in complete with 14 cables 12 volt and 4 cables for 24 volt It displays and adjusts the current, voltage and position values of the Turbo VGT turbochargers. It can test all types of turbos with electronic, vacuum and vacuum sensor. Operates on 200 volts of electricity Calibration test plates supplied for easy verification of machine accuracy Supports PWM, FDCan, Can 2.0, Linbust, j1939 automatic communication protocols You can assign programmes to activators Quick-release mounting flange with adapters Nsdeq Trzfjpfx Alhewh Machine weight 150kg Full CE Accreditation INCLUDING 1 x FX1 Flowbench Machine 1 x Touch Screen Monitor 14 x R.E.A. Cables 4 x 24 v Cables (OPTIONAL) 3 x C-Clamps 1 x Magnetic Stand

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, fuel type: gas, output current: 178 A, output voltage: 6,600 V, output frequency: 50 Hz, continuous power (apparent): 1,976 kVA, motor manufacturer: MWM Deutz, MWM Deutz TBDG 441 BV16, including generator for combined heat and power (CHP) plant, dual fuel, gas, diesel, year 1993. Spare parts also available for sale: turbocharger, injection pump, cylinder heads, crankshaft, etc. 7 units of engines and generators available, AVK 6600V 173A 50Hz, control unit. Nwjdpjy Hmhbsfx Alhsh

Condition: used, mileage: 6,43,118 km, power: 340 kW (462.27 HP), first registration: 12/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro5, total width: 2,550 mm, total height: 3,630 mm, loading space volume: 47 m³, loading space length: 7,700 mm, loading space width: 2,460 mm, loading space height: 20,501 mm, Year of construction: 2013, Equipment: ABS, air conditioning, parking heater, tail-lift, DAF XF 460 FT Keppler Sliding Wall Beverage Body VIN: OE915762 Chassis / Attachments: * Leaf / air suspension * Lift axle * Wheelbase: 4,800 mm / 1,400 mm * Tyres: 1+3. 385/55 R22.5 2. 315/70 R22.5 * Remaining tread: approx. 50-60% * 1 x aluminium fuel tank, 620 l * 1 x AdBlue tank * Fixed trailer coupling + under-coupling system * LBW Bär BC 2000 SA, lifting capacity 2,000 kg, year 2013 Body: * Keppler sliding wall body with LBW Bär * Keppler type: 80.18, year 2013 * Body dimensions: 7.70 m x 2.46 m x 2.05 m * 4 x load securing poles * Aluminium floor Cabin / Driver’s Cab Nedpfx Aezdwrvjlhswh * SC cab * 2 x air horns * 2 x bunks * Roof hatch * Air conditioning * Auxiliary heater * CD radio Engine / Transmission * 340 kW / 460 hp // 12,902 cm³ // Euro 5 * ZF AS-Tronic / automatic transmission * ZF intarder * Differential lock * 11 / 2016: Engine and turbocharger overhaul at 453,000 km Weights * Gross weight: 26,000 kg * Payload: 12,500 kg * Unladen weight: 13,750 kg Miscellaneous * German vehicle * Roadworthiness inspection (HU) valid until 10/2026 New roadworthiness inspections, safety checks, or changes to gross weight (downrating/uprating) are available on request. We are happy to assist you with obtaining export/transfer number plates and can arrange transportation of your purchased vehicles throughout the Federal Republic. Contact us!---- We speak the following languages: German, English, and Russian!---- No liability is accepted for printing or typographical errors. Subject to change, prior sale, and errors!----Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. Thanks to our many years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the sale of new and used commercial vehicles. On our 11,000 m² site you will find a wide variety of vehicles. Our company philosophy is shaped by fairness and integrity. Since customer satisfaction is very important to us, we offer an excellent all-round service package and provide you with a competent contact person who will assist you with the purchase or sale of vehicles. See for yourself! Our services for you: Loading vehicles We are happy to help you with loading your purchased vehicles. Arranging special transports We are happy to assist you in organising special transports. Temporary/export registration plates We are happy to assist you in obtaining export or short-term registration plates. Handling customs formalities We are happy to assist you with customs procedures.

Condition: used, Year of construction: 2026, operating hours: 380 h, TECHNICAL SPECIFICATIONS KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production year. Acceptance/initial registration is from 2026. GENERAL DESIGN ? High-performance tracked vehicle for professional use in challenging terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER loading crane, PK 23002 SH E Power Link Plus ? Suitable for assembly, lifting and transport work in difficult terrain ? Can be used on peatlands, forest paths, tracks, mountainous regions and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Ability to turn on the spot OFF-ROAD CAPABILITIES ? Gradient capability up to 60% ? Lateral inclination up to 40% ? Wade depth up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive surfaces ? Optimal for work away from paved roads CAB ? Safety cab in ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen operating terminal ? Rear view camera ? LED work lights ? GPS telemetry and fleet management system CRANE SYSTEM Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic knuckle boom loading crane ? Continuous slewing system ? Hydraulic six-stage boom extension Performance data ? Lifting moment 21.5 mt (215 kNm) ? Maximum lifting capacity approx. 6,200 kg ? Maximum hydraulic reach approx. 17.10 m ? Lifting capacity at maximum outreach approx. 890 kg ? Precise load positioning through sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection ? HPSC stability monitoring ? Active vibration damping Nwedpezdl R Tsfx Alhoh ? Hydraulic winch ? Four-point outriggers ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead power line and electricity pylon construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction ? Forestry special work ? Work in moorlands and nature reserves ? Disaster control and rescue operations ? Assembly and lifting work in difficult-to-access terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload with excellent off-road capability ? Safe operation even under the most difficult conditions ? Economical alternative to mobile cranes in difficult terrain ? High flexibility for energy suppliers, network operators and specialist civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with a PALFINGER PK 23002 SH E Power Link Plus offers maximum off-road capability combined with powerful crane technology. Thanks to the extremely low ground pressure, high payload and a reach of over 17 meters, the machine is particularly suitable for lifting, assembly and transport tasks in areas that cannot be reached with conventional truck cranes or construction machinery.

Condition: used, mileage: 2,14,534 km, power: 110 kW (149.56 HP), first registration: 09/2007, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: orange, gearing type: automatic, Well-maintained Mercedes-Benz Kamag Wiesel Kögel transfer trailer with fifth wheel for semi-trailer. Vehicle is 1st hand. Engine overhauled with new turbocharger. ? hydraulically height-adjustable fifth wheel ? Hydrostatic drive for stepless acceleration up to 40km/h ? ? mounting of all common swap bodies BDF 7.15 - 7.82 ? Swap body lift truck ? Lifting height 950- 1500mm ? Central lubrication system ? ? automatic ? Cab with rear window ? Rotating beacon ? Trailer coupling with air connection ? Maneuvering coupling: available (front) ? Trailer coupling: available (rear), incl. light + air ? electric windows + mirrors ? hydraulic locking ? Transmission type: automatic ? Total weight: 18,000 kg Njdpjzdcvnefx Alhowh ? Unladen weight: 8,300 kg ? Payload: 9,700 kg ? Wheelbase: 4,800 mm ? Tires 80 % ? Financing available through our partner banks, we will be happy to help you. We expressly reserve the right to prior sale, as we also offer this item on other portals. Accessories without guarantee. Subject to alterations, prior sale or errors excepted. We offer and strongly recommend a viewing and inspection to ensure that the buyer has no misconceptions about the condition and suitability of the item. Viewings and inspections are possible at any time by appointment and are expressly desired

Condition: used, mileage: 1,01,747 km, power: 62 kW (84.30 HP), first registration: 07/2011, fuel type: diesel, empty load weight: 1,762 kg, maximum load weight: 1,038 kg, overall weight: 2,800 kg, axle configuration: 4x2, wheelbase: 3,000 mm, fuel: diesel, CO₂ emissions: 190 g/km, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 4,892 mm, loading space length: 2,500 mm, loading space width: 1,600 mm, loading space height: 1,300 mm, Year of construction: 2011, construction height: 1,970 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, Turbocharger defect! This used Volkswagen T5 Transporter 2.0 TDI from 2011 offers various equipment elements and functions that make it ideal for commercial use. The van is equipped with a 2.0-liter diesel engine with an output of 62 kW (84 hp) and meets the Euro 5 emissions standard. It has a mileage of 101,747 km and consumes an average of 7.2 l/100 km. Special features include rear parking sensors, glass side and rear doors and a loading/passenger compartment sliding door on both sides. The interior is equipped with an on-board computer and a high loading compartment partition with a fixed window. Other practical features include a driver and passenger airbag, lumbar support Nwjdpjtfbbrsfx Alhsh for the driver's seat and a brake assistant. This vehicle, painted in broom yellow, has a truck registration and a load capacity of up to 2,800 kg, making it versatile and adaptable for various transport requirements. Only sold to commercial customers (agriculture, freelancers, small and large businesses) or export. Subject to errors and prior sale.

Condition: used, mileage: 2,92,364 km, power: 400 kW (543.85 HP), first registration: 05/2012, fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, brakes: retarder, gearing type: mechanical, emission class: euro5, Equipment: air conditioning, all wheel drive, * MAN TGS 28.400 6x2-4 EEV HydroDrive * Garbage truck Nwjdpfxox Suwhs Alhsh * Steerable and liftable trailing axle * 16-speed manual gearbox (MAN TipMatic optional) * Output: 294 kW / 400 hp * Displacement: 10,518 cm³ * Engine type: MAN D2066LF40 (inline six-cylinder, turbocharger, intercooler, common rail) * Euro 5 EEV * Maximum permissible gross weight: 28,000 kg * Actual gross weight: 28,000 kg * Kerb weight: 15,800 kg * Mileage: 292,367 km * Seats: 2 * Tire size: 315/80 R 22.5 * Wheelbase: 3600 / 1350 mm * VIN: WMA71SZZ8CM592045 * Air conditioning: Automatic climate control * Special features: Integrated bin washing system * Vehicle year: 2012 * Axle loads: 1st axle: 7,500 kg * 2nd axle: 11,500 kg * 3rd axle (trailing axle): 9,000 kg * Body: STUMMER EUROWAREN * Type: MEDIUM XL CITY * Body year: 05/2012 * Net price—Tel./WhatsApp:

Condition: used, mileage: 31,354 km, power: 90 kW (122.37 HP), first registration: 09/1999, overall weight: 7,490 kg, fuel type: diesel, color: beige, gearing type: mechanical, loading space width: 2,440 mm, loading space length: 4,180 mm, loading space height: 1,800 mm, total length: 6,600 mm, total width: 2,500 mm, total height: 3,200 mm, number of seats: 6, Equipment: ABS, parking heater, Very good condition, directly from disaster relief service; regularly maintained; no rust; immediately ready for use. Large long-distance driver's cabin 2 with roof hatch / 2+4 seats with belts, optionally with sleeping berth. Rear axle differential lock. Engine Type/Model/Cycle: OM 904 LA, 4-stroke diesel engine with turbocharging and charge air cooling, direct injection, 90 (122) kW (hp) at 2300 rpm. 4249 cm³ Transmission: 6-speed manual gearbox Braking System: Dual-circuit air brake system with ABS, spring-loaded brake acting on the rear wheels, engine brake. Wheels: 6x 225/75 R 17.5 M+S, DOT 2017, approx. 80% tread depth remaining. Electrical System: 24V, onboard voltage 12V. Maximum speed: 109 km/h (documents), 115-120 km/h (speedometer). No tachograph. Turning circle: 13.7 m Weights and Loads (kg) * Perm. total weight: 7490 * Unladen weight: 4555 * Payload: 2935 * Axle load, unladen/permitted: 1. 2500/3300 2. 1900/4900 * Trailer load, unbraked: 1500 * Trailer load, braked: 3500 with continuous brake system: 7500 Dimensions (mm or approx.) L: 6505 W: 2500 H: 3200 Wheelbase: 3700 Approach/departure angle: front: 23° rear: 17° Loading platform height: 1127 Trailer coupling height: 670 Trailer coupling type: Rockinger, Ringfeder G 135 Trailer socket/type/voltage: 12V, 13-pin, with 7-pin 24V adapter, 15-pin Brake connections: dual-line braking system Drawbar load: 400 kg Nodjycnl Espfx Alhswh Hot air heating Make/type: Eberspächer Type D1LC, heating capacity: adjustable between 850 - 1800 W Fuel tank: 125l + holder for 2x 20l canisters Price includes new technical inspection (TÜV) +++ Subject to errors, modifications, and prior sale +++