Used Ukb Straightening Press for sale (12,414)

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 6500 € 125.45 € 60 to Chodpfxjypbwhe Af Aoc fix 250 mm 1040 mm 180x120 mm 4 mm/s 10 mm/s 1710 mm 700 mm 2100 mm 800 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH user manual in GERMAN and ENGLISH

Condition: new, neu ca. 6-8 Wochen ab Auftrag Italien 6500 € 125.45 € 70 to fix 900 mm 900 mm 1700 mm 700 mm 2100 (PSS: 2300) mm The table can be lifted with a chain Hydraulic unit with motor and pump Adjustable maximum pressure Cedoypbwzopfx Af Aohc Manometer Equipment compliant with CE regulations. Operating instructions in German and English. MODEL VERSIONS: PSS 70 TL: 1 speed 4 mm/s, single-hand control with lever € 6.500,00 PSS 70 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 7.200,00 PSS 70 NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 7.900,00 PSS 70: same as PSS 70 NC but with stroke 500 mm € 8.700,00

Condition: new, neu Cedpoypbw Uofx Af Ajhc ca. 12 Wochen ab Auftrags Türkei 8900 € 171.77 € 100 to fix 300 mm 1570 mm 220x160 mm 5 mm/s 10 mm/s 2500 mm 1000 mm 2200 mm 1600 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: used, gebraucht 080242 Chjdpfxez Afcmj Af Aec prompt, Zwischenverkauf v Italien 1890 € 1 Upper tool 1033/28°/R 0,6/8 mm 4 x 835mm Lower tool 3000/U 8 mm 3 x 835 mm + 1 x 400 mm

Condition: refurbished (used), Year of construction: 2026, Pellet Press for Sale Chedpfx Ajzq E Avof Ajc Manufacturer - General Dies Engine Power - 200 Kw Capacity - 2,2 t/h Year - 2014 / 2026 Reconditioned

Condition: good (used), Altinisik Makina 1020 Flexographic Printer The machine is fully operational and ready for production. Like-new condition. Made in Turkey. Max sheet size: 1020 x 2400 mm Cjdpezz Hh Ijfx Af Aehc Min sheet size: 300 x 700 mm Speed: 7000 sheets/h Vacuum feeder

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 17,000 h, Machine in very good condition, only 17.000 hours. Fully functional. Chodpfez Ayq Esx Af Aoc

Condition: excellent (used), Year of construction: 2017, Pressing force: 8,000 kN Stroke: 2,000 mm Clamping area: 4,900 x 2,500 mm Max. tool weight: 50,000 kg Approach speed: 300 mm/s Working speed: max. 60 mm/s - min. 6 mm/s Weight without tool: 225,000 kg Codpfx Afez A Tvxj Ajhc

Condition: good (used), Year of construction: 2015, functionality: fully functional, bending force (max.): 230 t, number of axes: 5, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Standard equipment: Machine Codpfxez D Tnws Af Ajhc - Robust machine frame in all-steel construction - Press beam, stress-relieved by annealing - Spherical mounting of the press beam with inclination - Electro-hydraulic upper drive with 4-cylinder technology - Generous bending clearance - Flat front covers - Modern block hydraulics - Electronic pressure gauge - Measuring system with glass scale and spring compensation - Hydraulic oil in the machine (lifetime lubrication) - Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Back gauge system - Rear back gauge system, 2 axes, X and R axes - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool holder, manual clamping, hardened - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - Manual crowning Control system - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15-inch touch screen - Network capable - Teleservice via modem Operation - Control panel with LCD keypad and foot switch - Communication bus Safety - Standard safety devices

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Stable frame welded construction of thick-walled Special hollow profiles , sliding table and pressure beam with 50 mm hole pattern . On the left side continuous abutment for grouting the wide , lower abutment in 2 levels. Vertical pressing cylinder on specialty bar with one- quick adjustment with weight compensation in the 50 mm hole pattern adjustable in height. Long sliding table ensure the continuous recording of high jacking forces . Fast, smooth width adjustment with ball bearing Carriage with central fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and equipped with counterbalance . Lower horizontal pressing cylinders with bore for Codpfx Afjd Ih H Ne Aohc two abutments levels without weight compensation . Abutment and pressure plate depth 100 mm Machine controlled electro -hydraulic with 2 pieces vertical pressure cylinders d = 60 mm, stroke 120 mm, single-acting, with counterbalance and One-hand height adjustment, 2 piece horizontal pressure cylinders d = 40 mm stroke, 120 mm single-acting ( 1 x with weight compensation ), 2 hand control valves , Pressure gauge, pressure regulator valve 1 of 20 to 150 bar corresponds to 550 4200 kg compression force vertically. With 3 kW three-phase motor for 400 volts , 50 Hz Operating voltage. Complete with electrical connection . Painting RAL 7035 anthracite gray with light gray RAL 7016 . (technical details according to manufacturer - without guarantee ! ) The detailed technical description can be found in the attached pdf file

Condition: used, Year of construction: 2006, working width: 520 mm, roll width: 520 mm, roll diameter: 1,000 mm, Equipment: documentation/manual, Video below We offer this used ETI Converting Equipment Cohesio ST 520 coater, die cutter, UV silicone coating, flexographic printing press 1 colour, , 11 magnetic cilinders, year of construction 2006. multifunctional equipment that allows self-adhesive materials and labels. linerless 1 flexo 2 hotmelt coating guns (roatating bar, lips + ‘Waterwall”) 3 unwinders Web width of 520 mm E + L webguides at the infeed and between hotmelt and UV printing unit 2 Corona treatments for two unwiders 2 cleaners Chodpfxeyalqye Af Aoc UV Curing on 1 Flexo units (UV-Ray), which chilling rolls 2 die cutting units Chiller Working hours 9000 Year of production 2006 more information on request If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 1994, Clamping unit: Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of stages: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2 x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Piston 2 diameter: 60/40 mm Weight, approx.: 16 t Hydraulics: Pressure setting: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 at 300 bar Drive power: 22 kW Tank dimensions (L x W x H): 1,000 x 770 x 535 mm Closing speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Pressing stroke: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s Cjdoz Etaispfx Af Ashc

Condition: used, Year of construction: 2008, functionality: fully functional, The Bruderer BSTA 500-110B is a 500 kN Swiss-built high-speed stamping press, fitted with a BSV 75T double servo feeder for precision two-track strip feeding. Capable of up to 750 strokes per minute with B2 touch-screen control. Including sound insulating cabin. Nominal force: 500 kN (50 tons) Year of manufacture: 2008 Stroke rate: 100–750 spm (variable) Adjustable stroke: 19 / 25 / 34 / 43 / 51 / 57 / 64 mm Ram height adjustment: 64 mm Press table area: 1080 x 650 mm Control: B2, IPC-based touch-screen press control, programmable memory for fast retooling BSV 75T DOUBLE SERVO FEEDER Csdpfxszh Nnws Af Aohc Type: tandem dual-feed servo unit, independently controlled tracks Max. strip width: 70 mm per track Max. material thickness: 2 mm Feed length: variable, freely programmable Feed angle: variable Pilot release angle: variable No clamping/gripper bars — strip held by driven feed rollers during stamping Designed for parallel advancing of two strips or feeding pre-profiled/pre-stamped strip

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total width: 2,420 mm, total length: 6,840 mm, total height: 2,600 mm, overall weight: 15,000 kg, type of input current: three-phase, filling opening length: 2,000 mm, filling opening width: 1,980 mm, input voltage: 400 V, empty load weight: 4,950 kg, DGUV certified until: 08/2027, Presto HGS20R Chsdpfx Afezt Niro Aoc Container for roll-off tipper trucks 20 m³ usable volume technically refurbished repainted in desired RAL color hook lift system on both sides discharge door hinged at the top

Condition: new, Year of construction: 2026, Actually one showroom machine available. Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Chodpjxfwdjfx Af Aoc Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: used, Year of construction: 2005, power: 7 kW (9.52 HP), FOR SALE / FOR RENT: VERTICAL BALER! (Rental available in Lithuania, Latvia, Estonia, and Poland) Technical Information: Manufacturer: HSM Model: HSM 500 VL Pressing force: 54–540 kN Bale size: 1200 x 800 x 1200 mm Bale weight: approx. 500 kg Max. bale size: approx. 1200 x 800 x 1200 mm (W x D x H) Chedpfez Ehgwsx Af Aec Press chamber dimensions: 1200 x 800 x 1520 mm (W x D x H) Motor: 7.5 kW Year of manufacture: 2005 SALE PRICE - 4400 EUR + VAT RENTAL PRICE - 160 EUR + VAT

Condition: like new (used), Year of construction: 2021, Almost New: Complete Compaction System Ludden & Mennekes SVS11+KEV 1. Stationary Screw Compactor L&M SVS 11 Virtually unused, stationary screw compactor (~1 month) designed for filling compaction containers and/or other containers. The machine is constructed from a robust, welded steel frame with continuously welded seams. Its low-maintenance screw compaction system is suitable for continuous feeding, and the compaction chamber does not require periodic cleaning. Main technical specifications Overall length: 2,480 mm Overall width: 1,660 mm Overall weight: 2,300 kg* Loading height: 1,350 mm Feed opening: 1,375 × 1,490 mm Csdpfxoz Eg Dzs Af Ajhc Screw diameter: 750 / 500 mm Screw speed: 17 rpm Drive power: 11 kW Residual-current device / Fused plug Type B / 300 mA 2. Hydraulic Container Coupling/Decoupling System Hydraulically operated coupling and decoupling system with forward and reverse movement. The hooking grippers are operated manually. Designed for the secure connection of different types of compaction containers. 3. L&M KEV Cardboard Intake/Deflection and Pre-Shredding Unit Virtually unused L&M KEV coarse shredding unit for bulky cardboard packaging, cardboard tubes with cores, and other large-format packaging materials. The material is reduced to a size suitable for efficient compaction, helping to improve compactor utilization and reduce disposal costs. The unit can be installed above L&M self-compacting containers or stationary compaction systems so that shredded material falls directly into the filling opening. Main technical specifications Dimensions (L × W): 1,230 × 1,490 mm Shredding shaft width: 1,400 mm Cutting knife diameter: 585 mm Number of cutting knives: 9 Feed opening: 960 × 1,400 mm Drive power incl. power supply: 2.2 kW + 0.75 kW 4. L&M PCS 6500 Compaction Container Main technical specifications Capacity: 32 m³ Dimensions: 6,500 × 2,500 × 2,600 mm PRICE ON REQUEST

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, overall weight: 12,000 kg, Used toggle-type cold forming press Cjdpfjz E Dc Iex Af Ajhc Manufacturer: SCHMID Type: T400 Year of manufacture: 1997 Machine with standard accessories.

Condition: ready for operation (used), Year of construction: 1984, stroke length: 60 mm, controller manufacturer: SIEMENS, Mechanical stamping press manufactured in 1984. This KAISER V50W High-Speed Press underwent a complete mechanical and electrical overhaul in 2022, featuring a new Siemens control system and a SEW 59 kW main motor. It offers a pressing force of 500 kN and a stamping speed of up to 400 strokes/min. If you are looking to get high-quality stamping capabilities, consider the KAISER V50W High-Speed Press we have for sale. Contact us for further details. • Retrofit/overhaul: Complete mechanical and electrical overhaul in 2022 (approx. €50,000) • Stroke: 8–60 mm • Ram adjustment: 80 mm • Stamping speed: up to 400 strokes/min • Table size: 800 × 550 mm • Main motor: SEW 59 kW (installed 2022) • Control system: Siemens (new electrical system and cabinet in 2022) • Operator panel: Siemens SIMATIC HMI • Press force monitoring: UNIDOR • Condition: Very good, ready for operation Cjdez E Ikispfx Af Ashc Technical Specification Stamping Force 500 Kn

Condition: refurbished (used), Automatic line for forging / hot stamping Installed after refurbishing in 2015 and having run for not more than 1,000 hours, condition is excellent. ➢ ADIGE CM 500 AUTOMATIC SAW ➢ 50 KW INDUCTION OVEN ➢ ELECTRONIC AUTOMATION SYSTEM ➢ VACCARI SCREW PRESS 180 screw diameter ➢ 10-POINT AUTOMATIC LUBRICATION SYSTEM ➢ BALCONI 50T TRIMMING PRESS ADIGE CM 500 AUTOMATIC SAWING MACHINE WITH 3.5-METER AUTOMATIC BAR LOADER Technical specifications: -Min./max. cutting capacity: 8 mm / 60 mm diameter -Standard cutting speed: ADIGE SALA. -Head motor power: (50 Hz) 2.2 kW -End-of-bar scrap equal to or shorter than the usable piece -Central hydraulic tank capacity: 200 liters -Cutting emulsion tank capacity: 50 liters -Weight: approx. 1,200 kg -Siemens electrical components 50 kW INDUCTION OVEN WITH 1 INDUCTOR (8–20 mm) with ELECTRONIC LOADING ARM For horizontal and vertical loading of work pieces Features a brushless motor, programmable axes, and press interpolation with electric axes; electronic components: Siemens Load capacity: 4 kg; vertical stroke: 80 mm; power supply: Electro-pneumatic Chsdpfx Aozcdluef Ajc VACCARI SCREW PRESS 180 screw diameter Technical specifications: -Screw diameter: 180 mm -Theoretical pressure: 300 tons -Table dimensions: 430 x 550 mm -Slide dimensions: 500 x 650 mm -Ram stroke: 350 mm -Distance between uprights below the guides: 450 mm -Distance between uprights within the guides: 350 mm -Max. height between table and ram: 650 mm -Strokes per minute: 35 -Table height under the guides: 300 mm -Main motor: hp 30 -Machine dimensions: 4100 x 2600 x 2200 mm -Approximate weight: 11,000 kg NEW SIEMENS S7 ELECTRICAL SYSTEM NEW PNEUMATIC SYSTEM NEW LUBRICATION SYSTEM BALCONI 50T TRIMMING PRESS Technical specifications: -Power: 50 tons -Table dimensions: 800 x 500 mm -Ram dimensions: 440 x 380 mm -Max. die height: 400 mm -Adjustable stroke: 100 mm -Strokes per minute: 35–100 -Main motor power: 5.5 kW

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Quantity of oil in l: 1100 Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Chsdpfx Afjhtaaqs Ajc Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40

Condition: new, New Transfer press line from min. 300t up to max. 3500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Chedpfxef Rt Ubj Af Ajc

Condition: used, Year of construction: 2019, power: 4 kW (5.44 HP), 1. PRESCONTAINER LM10ASG +HKV, YEAR OF MANUFACTURE – 2019 OUTPUT – 5.5 kW CAPACITY – 10 m2 2. PRESCONTAINER LM10ASG, YEAR OF MANUFACTURE – 2015 OUTPUT – 5.5 kW CAPACITY – 10 m2 3. PRESCONTAINER LM12R + HKV, Cedpfoz Hclkox Af Aehc YEAR OF MANUFACTURE – 2009 OUTPUT – 5.5 kW CAPACITY – 10 m2 4. PRESCONTAINER NP10APK, YEAR OF MANUFACTURE – 2011 OUTPUT – 5.5 kW CAPACITY – 10 m2 PRICE UPON REQUEST!

Condition: used, Ražotājs: Munch Modelis: 420 Ražîba: 1 tonna stundā Elektrojauda: 2x75 kW Diametrs 420 mm Komplektā ar dzesētāju pēc kapitālā remonta Codpfx Afjwfqn Ao Ajhc clear 134 / 5,000 Translation results Translation result Manufacturer: Munch Model: 420 Production: 1 ton per hour Electric power: 2x75 kW Diameter 420 mm Complete with cooler after overhaul

Condition: excellent (used), Year of construction: 1999, LVD PPEB110/30 CAD-CNC 110T Serial number: 26225 Year of manufacture: 1999 Bending length: 3050 mm Servohydraulic bending system Chedpfx Ajzzafgsf Asc Precise slider positioning using a linear encoder Suitable for precise sheet metal bending.