Used Amada Hfa 330 for sale (221)

Condition: ready for operation (used), Year of construction: 1990, Automatic band saw AMADA, Model: HFA 250 W, Year of manufacture: 1990 Cutting range, round material: 30–250 mm Square: 270 mm x 250 mm Machine is in ready-to-operate condition. Machine documentation available. Podpfx Abexyx A Ij Iegw

Condition: good (used), Year of construction: 2002, Technical specifications Pgedpfev Tzvhex Ab Isw Ø: 700 mm Rectangular: 800 x 700 mm

Condition: good (used), Year of construction: 2006, Technical specifications Ø: 400 to 1000 mm Rectangular: 100 x 400 mm to 1000 x 1100 mm Pgodpov Tztyefx Ab Isw

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1999, controller model: Amada Operator, bending force (max.): 320 t, stroke length: 350 mm, working length: 4,100 mm, TECHNICAL DETAILS Press force: 320 t Bending length: 4,100 mm Pgsdpexwnxtjfx Ab Iew Stroke: 350 mm MACHINE DETAILS Control: Amada Operator Total power requirement: 32 kW Dimensions & Weight Space requirements: approx. 4,300 x 2,600 x 3,400 mm Machine weight: approx. 23,500 kg EQUIPMENT Amada quick-change tool holder Amada lower tool holder Controlled axes: y1, y2, x, r, z1, z2 Rear safety doors Two-hand foot operation

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 13,000 h, machine/vehicle number: MP2512C1, sheet thickness (max.): 6 mm, working length: 2,500 mm, working width: 1,270 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 60 m/min, No reserve price – guaranteed sale to the highest bidder! Bidding obligates you to collect the item on time by 15/12/2025!  Pedjxzf T Ajpfx Ab Isgw The machine has been regularly serviced by Amada. TECHNICAL DETAILS Punching working area X x Y: 2,500 x 1,270 mm Laser working area X x Y: 2,000 x 1,270 mm Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 60 m/min Accuracy: ±0.07 mm Maximum material thickness: 6 mm Press force: 200 kN Max. strokes X-axis: 370 rpm Max. strokes Y-axis: 280 rpm MACHINE DETAILS Power consumption: 22 kVA Machine weight: 18,000 kg Operating hours Laser hours: 13,000 h Punching hours: 17,000 h Note: Information regarding the tools can be found in the attached images.

Year of construction: 2008, operating hours: 24,490 h, condition: ready for operation (used), General Data Machine weight 13000 kg Measurements height 2082 mm Control Unit Brand AMADA Model AMNC-F Dimensions Machine Length 4165 mm Main Drive Punching force 200 Kn This AMADA AC2510 NT was manufactured in 2008. It features a punching force of 200 kN and a turret capacity of 51 stations. It can handle sheet sizes up to 1270 × 5000 mm and thicknesses up to 3.2 mm. The machine supports a maximum sheet weight of 150 kg and offers high-speed turret indexing. If you are looking to get high-quality punching capabilities, consider the AMADA AC2510 NT machine we have for sale. Contact us for more information. Application Types Podpfjxzlr Sox Ab Iegw Punching

Condition: used, Year of construction: 2004, pressure 80 t chamfer lenght 2550 mm distance between columns 2050 mm Stroke beam 350 mm max. opening beam/table 620 mm C-recess 420 mm traveldistance X1+X2 cnc programmable 700 mm Z1+Z2 axes controlled by cnc 0-2000 mm max. distance R-axes 200 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 24000 h length 3380 mm width 1800 mm Podoxyzzaspfx Ab Iogw height 2750 mm weight 6100 kg total power requirement 9 kW dimensions of the machine ca. 3x2x2,5 m All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: reconditioned (used), Year of construction: 2017, operating hours: 2,710 h, functionality: fully functional, grinding length: 1,000 mm, grinding width: 600 mm, grinding wheel diameter: 405 mm, distance table to spindle center: 750 mm, table length: 900 mm, table load: 1,500 kg, type of input current: three-phase, table width: 600 mm, grinding wheel width: 50 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 300 rpm, overall weight: 11,000 kg, grinding spindle motor power: 11,000 W, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 2 m/min, travel distance X-axis: 660 mm, travel distance Y-axis: 500 mm, input voltage: 400 V, grinding wheel bore: 127 mm, Equipment: documentation/manual, CNC Surface grinder AMADA Techster 106 TECHNICAL CHARACTERISTICS: Year of manufacturing: 2017 CNC control: FANUC series 32i-B Colour touch screen: 15 ["] Maximum grinding lenght x width: 1000 x 600 [mm] W axis travel (longitudinal axis): 1300 [mm] Min. Stroke speed W axis: 0.1 [mm/min] Max. Stroke speed W axis: 40000 [mm/min] Rapid traverse rate W axis: 40000 [mm/min] X axis travel (transverse movement): 660 [mm] Min. Stroke speed X axis: 0.1 [mm/min] Max. Stroke speed X axis: 5000 [mm/min] Rapid traverse rate X axis: 5000 [mm/min] Resolution X axis: 0.0001 [mm] Stroke Y axis (vertical movement): 750 [mm] Min. Stroke speed Y axis: 0.1 [mm/min] Max. Stroke speed Y axis: 500 [mm/min] Rapid traverse rate Y axis: 2000 [mm/min] Resolution Y axis: 0.0001 [mm] Max. distance spindle nose / table: 750 [mm] Max. load on table: 1500 [Kg] Min. grinding wheel speed: 300 [rpm] Max. grinding wheel speed: 2000 [rpm] Grinding spindle motor power: 11 [kW] Max. diameter grinding wheel: 405 [mm] Max. grinding wheel width: 50 [mm] Grinding wheel bore: 127 [mm] Working hours: 2710 [h] Total power required: 29 [kVA] Weight: 11000 [Kg] EQUIPMENT / INCLUDED OPTIONS: 2-axis simultaneous 1x electro-magnetic chuck, 900 x 600 [mm] 1x automatic grinding wheel balancing device, MPM type 3.ESB.150A.114.CF 1x on-board measuring touch probe with compensation function 1x rotary dresser 1x NC swivelling rotary dresser 1x static straight dresser 1x paper tape filtration unit 1x oil chiller, DAIKIN AKZ149-C 1x oil mist extractor, IFS type M 1600 3x wheel flanges 3x grinding wheels 1x axis clamping kit 1x toolbox (service wrenches) 1x balancing arbor 1x transformer Pgjdpfxsxz Ecke Ab Ijw Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to the brands Okamoto, Jones & Shipman, Jung, Favretto, Blohm, Studer; also consider cylindrical grinders, lathes, machining centers, milling machines.

Condition: good (used), functionality: fully functional, Year of construction: 1995, machine/vehicle number: 100 30 A51117, controller manufacturer: AMADA, controller model: OPERATEUR, stroke length: 100 mm, overall weight: 7,000 kg, total length: 4,000 mm, total width: 2,000 mm, total height: 2,700 mm, input voltage: 400 V, Equipment: documentation/manual, AMADA APX CNC press brake - Max. pressing force: 1000 kN - Rated current: 19.9 A Podpfx Abjxw Ufme Iogw - Bending length: 3000 mm - Includes workshop drawer cabinet with matching press brake tools Note: The item must be picked up—bindingly—between 19 and 23 January 2026, on a date to be agreed upon. FCA D-76571 Gaggenau – loaded onto truck

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, working width: 4,050 mm, cutting angle (min.): 2 °, cutting angle (max.): 10 °, sheet thickness (max.): 8 mm, back gauge: 1,000 mm, TECHNICAL DETAILS Podexxr H Ropfx Ab Ijgw Sheet width: 4,050 mm Sheet thickness: 8 mm Cutting angle: 2 - 10° Cutting speed: 0.053 m/s Table length: 710 mm Electric back gauge: 1,000 mm MACHINE DETAILS Machine weight: approx. 10,100 kg EQUIPMENT Support arms for material Sheet lifting device Scrap container Cutting gap and angle adjustment via the control system

Year of construction: 2008, operating hours: 12,866 h, condition: ready for operation (used), General Data Machine weight 7500 kg Measurements height 2789 mm Pjdpexy Thljfx Ab Iogw Main Drive Laser power 2 kW Control Unit Brand AMADA Dimensions Machine Length 5745 mm Table Table load 330 kg This AMADA LC-2415 ALPHA IV was manufactured in 2008. A CO₂ laser cutter with a 2.0 kW power rating, it handles a working area of 4000 mm × 1550 mm. It can cut steel up to 10 mm, stainless steel up to 8 mm, and aluminium up to 3 mm. With a table load capacity of 330 kg and a total weight of 7.5 tons, it remains operational and testable. Contact us for more information about this machine. Application Types Cutting

Condition: used, Year of construction: 2007, pressure 170 t chamfer lenght 3000 mm distance between columns 2750 mm Stroke beam 200 mm max. opening beam/table 520 mm C-recess 350 mm traveldistance X1+X2 cnc programmable 700 mm Pedpfx Aexyzy Njb Ijgw R1 and R2 axis controlled by cnc 250 mm Z1+Z2 axes controlled by cnc 0-2500 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 36820 h length 3600 mm width 2200 mm height 2850 mm weight 12000 kg total power requirement 16,5 kW dimensions of the machine ca. 4x2,5x3 m Control Amada AMNC All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: good (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: 05020/T00559, overall weight: 3,500 kg, total length: 2,500 mm, total width: 1,600 mm, total height: 2,200 mm, input voltage: 380 V, input frequency: 50 Hz, AMADA ITS press brake Pgodpoxw T Tcsfx Ab Ijw - Rated current: 12.5 A - Max. press force: 500 kN - Bending length: 2000 mm - Includes a set of suitable press brake tools Attention: The item must be collected bindingly between 19 and 23.01.2026 at a date to be agreed upon. FCA D-76571 Gaggenau – loaded onto truck

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 18000 kg Clamping Unit Clamping force 2200 kN Opening stroke Max. 350 mm Main Drive Pjdpsxq Hugjfx Ab Iogw Bending length 6000 mm Stroke 350 mm Pressing force 2200 Kn This AMADA HFP NT 220-4L press was manufactured in 2011. It features a maximum press force of 2200 kN and a stroke up to 350 mm, weighing 18000 kg. A robust choice for heavy-duty operations, the AMADA HFP NT 220-4L machine we have for sale is ideal for your pressing needs. Contact us for more information. Application Types Bending

Condition: used, Year of construction: 2008, pressure 80 t chamfer lenght 2550 mm distance between columns 2050 mm Stroke beam 200 mm max. opening beam/table 470 mm C-recess 350 mm traveldistance X1+X2 cnc programmable 700 mm Z1+Z2 axes controlled by cnc 0-2000 mm max. distance R-axes 200 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 14600 h Dimensions of machine: length 3300 mm width 1600 mm height 2550 mm weight 5750 kg total power requirement 9 kW dimensions of the machine ca. 3,5x1,8x2,6 m Psdpfotv Rk Rjx Ab Ijgw Control AMNC NT All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: good (used), functionality: fully functional, Year of construction: 1997, machine/vehicle number: C971109, controller manufacturer: AMADA, controller model: PROMECAM, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, overall weight: 10,000 kg, total length: 4,500 mm, total width: 3,500 mm, total height: 2,800 mm, AMADA GPX 630 Guillotine Shear - Power supply: 5.5 kW Pgsdpfxsxw T Iao Ab Iow - Max. backgauge travel: 160 mm - Including left stop - Backgauge length: 3200 mm - Cutting length: approx. 3050 mm Note: The item must be definitively collected between 19 and 23 January 2026 on a date to be mutually agreed. FCA D-76571 Gaggenau – loaded onto truck

Year of construction: 2011, condition: ready for operation (used), General Data Machine weight 4700 kg Control Unit Brand AMADA Main Drive Pgsdsxx Dx Eopfx Ab Iow Pressing force 500 kN Stroke 200 mm Number of axis 8 This 8-axis AMADA HFE M2 5020 was manufactured in 2011. It features a hydraulic press brake with a maximum press force of 500 kN and a stroke up to 200 mm. Weighing 4,700 kg and operating at a noise level of 74 dB(A), it's CE certified and made in France. If you are looking to get high quality bending capabilities consider the AMADA HFE M2 5020 machine we have for sale. Contact us for more information. Application Types Bending

Condition: good (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 24550616, overall weight: 7,000 kg, total height: 1,900 mm, total length: 3,000 mm, total width: 3,000 mm, table width: 1,200 mm, table length: 2,450 mm, AMADA ARIES 245 CNC Punching Machine - Punching force: 200 kN - Power connection: 11 kVA - Includes accessories such as various punches and punching tools Attention: The item must be collected definitively between 19 and 23 January 2026 on a specific date to be mutually agreed. FCA D-76571 Gaggenau – loaded onto truck Pgsdpfx Aexw Tt Nsb Iew

Year of construction: 2001, condition: ready for operation (used), General Data Machine weight 9200 kg Control Unit Brand AMADA Pjdpfxexxdwuj Ab Isgw Main Drive Pressing force 200 kN Stroke 1350 mm Additional Equipment Next to the machine, there are 2 tool cabinets This AMADA Vipros 255 was manufactured in 2001. It is a used punching and bending machine, ideal for those looking to enhance their metal fabrication capabilities. Contact us for more information about this machine. Application Types Punching

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 2510047, total height: 2,200 mm, total length: 8,000 mm, total width: 7,000 mm, table width: 1,300 mm, table length: 6,000 mm, controller manufacturer: FANUC, controller model: SERIES 18-P, AMADA VIPROS 2510 CNC Punching Machine - Punching force: max. 196 kN - Equipped with a total of 31 turret stations - Includes a large lot of various accessories, such as punches and punching tools Note: The item must be collected on a binding date between 19 and 23 January 2026, to be mutually agreed upon. Podpexw Trfsfx Ab Isgw FCA D-76571 Gaggenau – loaded onto truck

Condition: ready for operation (used), Year of construction: 2012, operating hours: 15,279 h, General Data Pgedpfexxdv Rjx Ab Iew Machine weight 8100 kg Measurements height 1988 mm Control Unit Brand AMADA Dimensions Machine Length 4755 mm Main Drive Number of axis 6 Bending length 3110 mm Pressing force 1300 Kn This 6-axis AMADA HD 1303 NT press brake was manufactured in 2012. It features a press capacity of 1300 kN, a bending length of 3110 mm, and a stroke of 250 mm. With a throat depth of 420 mm and speeds up to 200 mm/s, it's designed for efficient operation. Consider the opportunity to buy this AMADA HD 1303 NT press brake. Contact us for more information about this machine. Application Types Bending

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 21000 kg Main Drive Psdpfx Aoxy Ap Eeb Iogw Punching force 300 Kn Number of axis 2 Table Table load 160 kg Control Unit Brand FANUC Movement X-Axis Movement 2500 mm Y-Axis Movement 1525 mm This AMADA EMZ 3610 NT CNC punching machine was manufactured in 2011. It features a Fanuc control system, a punching force of 300kN, and a working area of 2500 x 1525 mm, extendable to 5000 x 1525 mm with repositioning. The machine can handle sheet thicknesses up to 4.5 mm and supports a maximum table load of 160 kg. If you are looking to get high-quality punching capabilities, consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information. Application Types Punching

Year of construction: 2009, condition: ready for operation (used), General Data Machine weight 6030 kg Pgjdpfx Abow N Tm Uo Ijw Main Drive Number of axis 8 Media Power consumption 15.2 A This 8-axis AMADA HFE 80-25 L press brake was manufactured in 2009. It features a nominal press force of 800 kN, a stroke of 320 mm, and a working speed range of 1-10 mm/s. The machine has a robust frame with a total weight of 6030 kg and dimensions that ensure stability and precision in operation. If you are looking to get high-quality bending capabilities, consider the AMADA HFE 80-25 L machine we have for sale. Contact us for more information. Application Types Bending

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,650 h, Control Unit Brand AMADA Model CNC 3i Main Drive Pressing force 100 tons Bending length 3000 mm Number of axis 8 Additional Equipment Accessories: Includes tool package by arrangement Optional Tools: 2x 830 mm prisms and 2x 830 mm bending beams R5 This 8-axis AMADA HFE 3L 1003 press brake was manufactured in 2017. It features a pressing force of 100 tons and a bending length of 3,000 mm, complemented by an Amada CNC 3i control system. With only 3,650 operating hours, it is in excellent condition, fully functional, and ready for operation. Consider the opportunity to buy this AMADA HFE 3L 1003 press brake. Contact us for more information about this machine. Application Types Bending Pgsdpfxsxxdq Us Ab Ijw

Year of construction: 2013, condition: ready for operation (used), General Data Measurements width 3200 mm Measurements depth 6400 mm Measurements height 2500 mm Machine weight 11000 kg Table Table load 1200 kg Tools Number of index 30 This AMADA MEISTER G3 was manufactured in 2013. A robust surface grinding machine, it's ideal for precision metalworking. Consider the opportunity to buy this AMADA MEISTER G3 surface grinding machine. Contact us for more information. Pgodpfsxuax Tsx Ab Ijw Application Types Grinding