Used Unbalance Exciters for sale (174)

Condition: repair required (used), machine/vehicle number: 0855555/01, color: green, output voltage: 690 V, output frequency: 50 Hz, rotational speed (max.): 1,500 rpm, type of cooling: air, ambient temperature (max.): 40 °C, The generator is presented as in the photographs. It is offered on a "seen and liked" basis, so there are no warranties or return options. The alternator has cracks on the rear crankcase and requires inspection before use. For more details, please contact us. Technical Specifications: Gujdpetu Hypofx Albec Serial Number: 0855555/01 Machine ID: P08J155680 Frame/Core: LVS1804S2 KVA Base Rate (BR): 2790 KW Base Rate (BR): 2232 Frequency (Hz): 50 Revolutions Per Minute (RPM): 1500 Voltage: 690V Phases: 3 Base Rate Amperage (BR): 2334.5A Power Factor (PF): 0.80 Rating: CONT (Continuous) Excitation Voltage: 68V Excitation Amperage: 3.60A Ambient Temperature: 40°C Protection Class (Enclosure): IP23 Insulation Class: Class H Stator Winding: 65 Stator Connection: Star

Condition: good (used), 2 Pcs. “Friedrich 4.400 (2.750) x 1.200mm.“ for Sale Gusdpfx Alsvxhy Robsc Size: 4.400 (2.750) x 1.200mm. Unbalance Motors: 2 Pcs. Friedrich F2000-6-7.8 (5.6 kW / 1.000 RPM) With Rubber wearplates (Metso Trellex SQ300) Included: – Rubber springs – Spring holders for under frame

Condition: used, functionality: fully functional, Used Schenck Balancing Machine H 50 V/B with used CAB 690 H measuring unit. (Can be upgraded to a new CAB 920 unit for an additional (18 000–20 000€) The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Rotor Capacity - Rotor weight range: 20 – 6 000 kg - Maximum symmetrical load on pedestal bearing: 7 500 kg - Maximum symmetrical load on stand bearing: 3 750 kg - The machine can be loaded freely with lower weights when following recommended procedures. - Maximum rotor length between pedestals:1 600 mm (belt drive) Guedpjx Ein Ssfx Albec - Maximum diameter over machine base: 2 100 mm - Clamped rotor diameter ranges: 25–180 mm, 180–380 mm - Machine bed length: 3 500 mm - Balancing speed n depends on the rotor’s moment and must be selected to avoid overloading the drive. - Maximum permissible G·n² value: 1400 × 10⁶ kg/min² - Applies to a rigid symmetrical rotor mounted on pedestal bearings. - May be exceeded during dynamic tests on flexible rotors and strength tests. - End drive / FU motor: 7,5 kW - 4-speed gearbox: 120–2520 rpm - Belt drive BU 5 / FU: 7,5 kW - Unbalance Umar 0,5 gmm/kg: 0 gmm/plane

Condition: like new (used), functionality: fully functional, Year of construction: 2023, degree of automation: automatic, laser hours: 2,800 h, laser power: 6,000 W, positioning speed: 280 m/min, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, TruLaser 5030 fiber L76 6kW + LiftMaster Linear + Material Buffer small storage system BASIC MACHINE: TruLaser 5030 fiber (L76) Machine • Working area: 3000 × 1500 mm • Box-type frame • Longitudinal conveyor belt • Precision motion unit for high-accuracy processing • Gantry drive with linear direct drives • Process chiller for machine and laser (water/air) • Work area lighting • Pilot laser • Spraying system • Automatic nozzle cleaning • Integrated electrical enclosures • Integrated cabinet • Enclosed beam guidance via fiber optic cable (LLK) • Machine status indicator light • Transport and installation device TRUMPF laser • Pump diode excitation • Laser power regulation Cutting unit • Universal cutting head with fully adaptive lens system • Protective glass • Online condition monitoring for protective glass • Dynamic Focus Control Gedjyah Rcspfx Albouc • Automatic nozzle centering Control • Rapid post-production • SINUMERIK CNC • Ergonomic control panel with 21.5" wide-format multi-touch color display • Integrated technological parameters • Automatic shutdown • Programmable pressure/cutting gas selection • Microweld • Remote maintenance interface • Production planning • Multi-sheet processing • Condition Guide • Cutting Guide Functions • AdjustLine • BrightLine fiber • Smart Nozzle Automation • DetectLine • Drop&Cut • Integrated camera 1 for process monitoring • ControlLine • FastLine • FlyLine • FocusLine • NitroLine • PierceLine • PlasmaLine • Fusion Cut Performance Package • Highspeed Cutting Package • Copper Cutting Package • Brass Cutting Package Data transmission • USB port • RJ45 network interface • Online Update Manager Safety • CE marking and EC Machinery Directive compliant • Light barriers • Multi-chamber compact dust extraction unit • Electric rolling roof • Enclosed protective housing with certified viewing panels on both right and left sides Advanced standard configuration • Compact dust extraction • Mild steel slats • Laser powered via the machine • Automatic longitudinal pallet changer • Machine ambient temperature range 5-35°C / up to 45°C • Smart View MT ready • Data usage agreement • Nanojoints • Smart Rerun / Purchase • External solid-state laser TruDisk 6001 with BrightLine fiber OPTIONS: Highspeed Eco cutting package • High-speed cutting with reduced gas consumption Thick plate cutting package Prefilter for nitrogen and oxygen • Particle filtration for nitrogen/oxygen process gas lines, prefilter with external filter element Easy Filter • For annual maintenance of spent cooling water • Eliminates regular water changes Wireless Operating Point

Condition: excellent (used), Year of construction: 2006, operating hours: 25,030 h, Model QUATTRO 2kw Year 2006 remanufactured by Amada specialist 2021 Traverse Method X Axis Head Traverse Y Axis Head Traverse Axis Traverse Distance 1270 x 1270 x 300mm (Z Axis) Max. Sheet Size (including 1 reposition) 2540 x 1270mm Max. Guaranteed Material Thickness 9mm Mild Steel 9mm Stainless (Oxygen Cut) 4mm Stainless (Clean Cut) 4mm Aluminium (A5052) Max. Material Weight 210Kg Max. Feed Speed 80m/min(X & Y Axis) 60m/min (Z Axis) Positioning Repeatability /- 0.005mm Axis Drive (X, Y & Z) AC Servo Motor Workchute 1270 x 550mm Assist Gas 4 Ports, 6 Selections Auto-Change Electric Power Required (Includes Oscillator) 43KVA 400V /- 10% 50Hz Air Required Machine Only 6.0 Kgf/cm² 250 l/min Machine Length 3123mm Machine Height 2275mm Machine Weight 4.9 tonnes Standard Equipment Anti Scratch Roller System -Z-Axis Sensor Gusdpsuk U I Ujfx Albec NC Autofocus Oscillator Specification Model Fanuc C - 2000C RF Discharge Excited Fast Axial Flow 2000W CO2:He2:N2=5:40:55 /-2% each vol 1.75 /-0.25 Kgf/cm² (at regulator) 10 l/hour NC Specification Model: Fanuc FS - 160i-L 9" Colour LCD RS232C INTERFACE Air Cooled, Floor Mounted COMPLETE WITH CHILLER EXTRACTOR TRANSFORMER

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 10 kg, input voltage: 230 V, year of last overhaul: 2023, SCHENCK Highspeed Special Balancing Machine Type 110 MBRS for turbocharger core assemblies a for service, repair shops as well as research and development departments. The correction of the static unbalance can be performed inside the balancing machine on the compressor wheel side directly on the machine. Max balancing speed 250,000 rpm Gujdpfsq I Rz Rsx Albsc

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 30 kg, input voltage: 400 V, rotor diameter: 600 mm, year of last overhaul: 2023, power: 1.1 kW (1.50 HP), Balancing machine upgraded in 2009. 1 Machine base, welded construction 1 Balancing unit Vertical, single plane, permanently calibrated, 1 special spindle with centric flange 1 piezo-electric vibration sensor 1 3-phase drive motor of 1.5 kW, driven by a belt 1 Protractor disk 300 mm diameter, with 360 °, mounted on the spindle 1 Safety guard For diameters up to 600 mm and heights of 420 mm 1 SCHENCK CAB 803 measuring device - With direct data entry system via touch screen - Industrial PC with active TFT color monitor - Visualization of results via vector meters - Network capability - Polish dialogue - Modular, easy-to-use system design - Optimized signal processing system via digital Schenck MMD filter - Intelligent, self-diagnosing measurement electronics system Guedpfsq Umcrsx Albec - Operation using standard Windows routines - Programs for: - Straight compensation, keyway, compensation index - Tolerance calculation according to ISO 1940 - Log report in PDF format Balancing speeds from 0 to 720 RPM - Smooth Max residual unbalance 5 - 10 gmm (DIN 1319)

Condition: excellent (used), The Thermo Scientific Heraeus Biofuge Primo R centrifuge enables high-throughput and low-throughput processing with optional rotors and accessories and a maximum speed of up to 15,000 rpm. This compact, high-performance refrigerated centrifuge provides efficient and flexible sample processing. The Primo R features automatic rotor recognition and unbalance detection with uniform temperature control. The Primo R is ideal for small medical laboratories, biochemical and molecular biology research, and routine analysis in industrial laboratories. Typical applications include sedimentation of cells (algae, yeast, bacteria, etc.), sedimentation of cell organelles and cell fragments, preparation of DNA samples and protein precipitates, blood and urine analysis, and centrifugation of standard test series in microliter tubes. This refrigerated centrifuge is equipped with a fixed angle and tiltable rotor. Technical specifications: Voltage: 220-240 V Current: 2.9 A Power: 490 W Maximum centrifuge speed: 15,000 rpm (adjustable in increments of 10) Minimum centrifuge speed: 300 rpm Maximum RFC Weight: 21855 g Temperature range: -9...40°C Noise level at maximum speed: < 60 dB Rotor recognition: automatic Unbalance recognition: electronic Safety features: lid lock and interlock Rotor specification 1: Number: 7591 Type: swinging bucket rotor Maximum speed: 4000 rpm Maximum RCF: 2585 g Maximum capacity: 4 x 100 mL Gjdpfx Aljt Eva Ijbjuc

Condition: used, This listing is for the Bioer Quant Gene 9600 Fluorescent Quantitative Detection System The unit is in full working condition and is ready for immediate use Bioer LineGene Plus 9600 FQD-96A – Fluorescent Quantitative Detection System Key Specifications Sample Capacity: 96-well 0.2 mL PCR plates, 12 × 8-strip tubes, or 96 × 0.2 mL single tubes (transparent bottom) Reaction Volume: 5–100 µL Dynamic Range: 1–10¹⁰ copies/µL Detection Channels: 5 or 6 channels (F1–F6) Excitation Wavelength: 300–800 nm Emission Wavelength: 500–800 nm Temperature Range: 4–105°C (0.1°C increments) Temperature Control Accuracy: ±0.1°C Temperature Uniformity: ≤ ±0.3°C Heating Rate: Up to 4.0°C/s Cooling Rate: Up to 4.0°C/s Hot Lid Temperature Range: 30–110°C (adjustable, default 105°C) Gradient Temperature Range: 1–36°C Scanning Mode: Full-plate scanning and designated line scanning (5.5 seconds per scan) Programming: Up to 20 segments per program, up to 99 cycles Operating System Compatibility: Windows 7/8/10 Software Requirements: Microsoft Excel 2000/2002/2003/2007/2012 Minimum Computer Configuration: RAM: 512 MB; Hard Disk: 10 GB; CPU: Pentium 4; Virtual Memory: ≥1000 MB Power Supply: 100–240V, 50/60Hz, 600W Dimensions: 410 mm (W) × 386 mm (D) × 352 mm (H) Weight: Approximately 20 kg Certifications: CE, EMC, RoHS2.0, MET Gsdpfx Alsxhgfgobjuc .

Condition: used, Synchronous servo motor with holding brake and gear, Geared motor, electric motor, angular gear motor Engine: Manufacturer: LUST LTI DRIVES Type: LSK-190-4-30-560 T1,P,KK,1R Order no.: 716090 Art. No.: 0970.8015 Machine type: Permanently excited synchronous servo motor DC link voltage of the controller Uzk: 560 VDC Nominal power: 12,13 kw Gusdpfx Ajf Dlzqjlbjc Nominal speed: 3000 rpm Nominal torque Mn: 38,6 Nm Standstill torque M0: 61.5 Nm Rated current In: 26.6 A Standstill current I0 / I0max: 41 / 164 A Pole pairs: 3 shaft diameter: 32 mm Wavelength 50 mm - Shaft journal with keyway and keyway DIN 6885 / A10x8x50 - Option 1R Resolver 1 pole pair - Option KK Terminal box - Option T1 (DIN-PTC double basic insulation) - Power connection 8-pole junction box - Resolver connection 12-pole junction box Holding brake: Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order no.: 717173 Art. No.: 228-00043 Nominal voltage: 24 VDC Rated current: 4.5 A Nominal power: 108 W Braking torque: 160 Nm Angular gearboxes WESTFALIA Systemtechnik Shaft journal output: Ø 60 mm with feather key Shaft journal Length: approx. 120 mm Gearbox output speed: max 450 rpm. Gearbox input speed: max 4500 rpm. Transmission ratio: 10:1 - Gearbox can be mounted on two flange surfaces - Mounting hole on gear unit 180 x 180 mm / 180 x 230 mm - Transmission with 3-fold sprocket outer diameter: 147 mm, number of teeth: 17 Overall dimensions L x W x H: 1020 x 250 x 350 mm total weight: 175 kg sound condition 2 pieces available, price per piece [...]

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 41,657 h, controller model: SINUMERIK 840 D SL, laser power: 5,000 W, working length: 3,000 mm, working width: 1,500 mm, TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 116 mm Laser power: 5,000 W MACHINE DETAILS Control: SINUMERIK 840 D SL Operating hours Total operating hours: 67,508 h Laser on hours: 41,657 h Current laser output (as of 27.04.2023): 5,335 W EQUIPMENT Torque drive in combination with linear direct drives Guedpfx Asx A Hagolbsc Enclosed beam guidance via laser light cable (LLK) Machine cooling unit (water-air) Integrated control cabinets with internal lighting Automatic pallet changer (longitudinal direction) 17" touch colour display Wide longitudinal conveyor belt TruDisk power supply via the machine Workspace illumination Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) Solid-state laser TruDisk 3001 with 1 LLK output LLK according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Universal cutting unit with fully adaptive lens system Cutting head strategy Protective glass against lens contamination Condition monitoring of protective glass ControlLine: height control and sheet outer edge detection Simple shop programming Extended shop programming Fast re-production Integrated technology data Automatic shut-off Programmable cutting gas / pressure selection FastLine FlyLine AdjustLine Teleservice via internet USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Compact dust extraction system Machine enclosure, certified viewing window, right-hand door Electric roller roof

Condition: used, Year of construction: 1993, operating hours: 57,000 h, functionality: fully functional, rotational speed (min.): 1,413 rpm, input voltage: 400 V, Industrial DC Electric Motors 481 kW – IEG / Ansaldo Available: 2 high-power industrial direct current (DC) electric motors, manufactured by IEG Trieste – Ansaldo Industria, designed for heavy-duty industrial applications. The motors have been dismantled from an industrial plant and are in excellent condition, complete with dedicated ventilation systems and control panels. Ideal for the revamping of existing plants, rolling mills, extruders, large fans, hoisting installations, or other industrial high-torque applications. Main technical data: Guedpeytgk Iofx Albsc Manufacturer: IEG Trieste – Ansaldo Industria Type: Direct current (DC) motor Power: 481 kW Voltage: 400 V Rated current: 1530 A Speed: 1413 rpm Duty: S1 continuous Excitation: 220 V Year of manufacture: 1993 Operating hours: approx. 57,000 Equipment included: - Dedicated ventilation system - Electrical control and command panels - Technical documentation available On-site inspection possible

Condition: used, Specification: Gusdpfx Alex I I Ulobec Excitation (light source) Bright white LED source with a median lifetime of >5 years Dimensions and weight 27 × 50 × 40 cm (W × D × H),

Condition: used, Two-jaw chuck, 2 jaw chucks, vice, face plate Gujdpfxsdu Uffs Albsc -Chuck size: Ø 250 mm -centrically exciting: -Weight: 35 kg

Condition: used, Welding device, welding device -Transfer in current condition as seen -pneumatic: exciting -Dimensions: 210/170/H370 mm Gsdpfjcti Aiex Albjuc -Weight: 11.3 kg

Condition: used, Two-jaw chuck, 2 jaw chucks, vice, face plate -centric: exciting -Chuck size: Ø 242 mm -Rezess: Ø 190 mm Guedpfjchyydsx Alboc -Hole circle: Ø 215 mm -Weight: 26.4 kg

Condition: good (used), Multi-spindle drilling machine -4 motors (1 motor defective) -pneumatically exciting -Drilling depth approx. 30 mm -Max. drilling distance: 1000 mm Gedpfx Alsb A Iy Tebsuc -Drive: 0.36 kW 2800 rpm -Weight: 280 kg

Condition: excellent (used), Pneumatic roller vibrator, pneumatic unbalance motor, vibration motor, shaker motor, shaker -Motors: unused -Type: R 120 -Working moment: 1200 cmkg -Rated frequency: 10140 to 11780 rpm -Centrifugal force: 6705 to 9100 N -Air consumption: 315 to 768 L/min -Switching level: 86 to 97 dB -Number: 3x motors available -Price: per piece Godpfx Ajb A Ntgslbsuc -Weight: 4 kg

Year of construction: 2021, condition: as good as new (ex-display), functionality: fully functional, Product features Superior performance: New TE module with special technique to ensure long service life. Precise temperature control technology ensures temperature flfluctuation of each well lower than 0.1℃. Unique bottom detection, compatible to reaction volume down to 5μl. Combination of precise light path system and super highly-sensitive PMT system ensures super high sensitivity and precision of flfluorescence detection. LED excitation light source of super long service life requires no maintenance. Guedpjuvdnnofx Albec Brand-new automatic hot lid technology, free from manual operation, automatic open and close, effffectively prevent reagent evaporation. 6 channels flfluorescence detection, no crosstalk between difffferent channels. Equipped with whole block scanning and formulated line scanning mode, 96-well double-color scanning takes only 5.5s. Powerful software system: Operation interface in English language, simple to use. Multiple templates, easy to fifind experiments saved, and fast to set up new experiment. (HRM), SNP analysis, relative quantitative and isothermal amplifification. Humanized software with user friendly interface. Comprehensive analysis and report function, flflexibly print single and multiple sample reports. Custom gain and auto gain fully satisfy various experiment demand of difffferent users.Various analysis modes: qualitative/absolute quantitative, standard curve, melting curve, high-resolution melting curve. Powerful technical team： BIOER owns over fififteen years’ experience in professional PCR development and technical accumulation. BIOER provides comprehensive pre-sales technical support and after-sales application engineers. It owns professional reagent development team which can provide a full range of reagents independently developed to deal with compatibility of the upstream and downstream reagents, making scientifific research easier. Brand new never used. Please check our other listings as well.

Condition: excellent (used), overall weight: 30 kg, total length: 900 mm, clamping width: 125 mm, 2-fold workpiece clamping - machine vice, mechanically via spindle drive on the side (right and left) with 12 mm Allen key. also different workpiece sizes could be excited. Prepared for hydraulic clamping. Jaw width 125 mm Gusdpsyuwlrofx Albjc Clamping range - length 0 - 150 mm 2 x locking bolts for quick adjustment total length approx. 900 mm; Table mount (front/rear) Weight approx. 30 kg Vise cleaned & checked.

Condition: as good as new (ex-display), Compact balancer with vertical spinning axis and load capacity up to 50 kg. Thanks to its compact design, the machine takes up relatively little space and does not require foundations, so it can be easily relocated to the desired location. The balancing process is controlled by the latest measuring system "ROTORTEST 9.5" with dedicated software equipped with workshop programs, which convert the unbalance into a convenient correction method, e.g. into drilling or milling parameters. Gjdpjf Nvwpsfx Albsuc Vertical axis balancing machine is recommended for balancing rotors mounted on a bore, e.g. fan rotors, pulleys, flywheels, tools, pumps and many others. The biggest advantages of this type of balancing machine are its universal application, the possibility of using dedicated self-centring chucks giving high measuring accuracy, simple and quick calibration method, so called "manufacturer's calibration", which does not require calibration runs to be carried out before starting the measurements. The whole procedure consists only in entering basic rotor parameters into the software. This machine is an excellent choice for balancing single pieces of various rotor models, and in particular for balancing large series of the same rotor model. Parameters Maximum rotor weight - 50 kg Maximum rotor diameter - 650/850 mm Maximum rotor height - 500 mm

Year of construction: 2023, condition: as good as new (ex-display), The mobile field balancing machine from the experts The statistics are indisputable: Over half of all faults and failures of machines and systems can be attributed directly or indirectly to unbalances in rotors. The SmaRT helps you to identify an unbalance simply and accurately, and to correct it with the minimum effort. With the SmaRT, rotors of almost any size and weight can be balanced quickly, costeffectively and accurately in the installed condition, and therefore without having to dismantle the machine. The SmaRT advantages: • Easy operation with the aid of navigation and function buttons, • Large illuminated colour display, Guedpfxomt Atde Albsc • Standardised vibration measurement, • Assessment setup to DIN ISO 10816-3, • Simple transfer and documentation of measurement results.

Condition: good (used), Two-jaw chuck, 2-jaw chuck, vise, faceplate -Clamping angle: 200 x 200 mm -centrically exciting -Mouth size: Ø 200 mm Guodpfx Aob A Ig Ajlbsc -Weight: 30 kg

Condition: good (used), Machine vice, sturdy vice, drill press vice Gujdpfx Aljb A Nt Hsbec -Jaw width: 125 mm -Clamping depth: max. 50 mm -exciting: pneumatic -Dimensions: 530/240/H150 mm -Weight: 56 kg

Condition: good (used), Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 125 mm -exciting: centric -Replaceable jaws: soft -Cone mounting: Ø 82 mm -Bolt circle: Ø 105 mm Gsdpfx Alsb A Rdqjbsuc -Weight: 14 kg