Used Walking Floor Semitrailer for sale (12,321)

Condition: used, maximum load weight: 28,170 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2020, next inspection (TÜV): 02/2027, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space height: 2,750 mm, loading space volume: 91 m³, Equipment: ABS, Stock no. 5833 Approx. 91 m³ Carnehl Moving Floor Semi-Trailer with Remote Control ---- * Manufacturer: Carnehl * Type: CS/AL - Moving Floor * First registration: 02/2020 * Gross vehicle weight: 36,000 kg Bwsdpfsy Sq Ucox Amnop * Unladen weight (according to registration): 7,830 kg * Payload: 28,170 kg * Axles: 3 x SAF with 1st axle as lift axle / disc brakes * Suspension: Air suspension with lift and lower function * Tyres: 385/65 R 22.5 approx. 50% on steel rims * Colour: White / Blue * EBS Wabco * Volume: approx. 91 m³ (13.50 m long x 2.475 m wide x 2.75 m high) * Remote control * Swing doors with pneumatic locking * Side protection tarpaulin * Roll tarpaulin with tension belts * Front operating platform with left and right access * 5 folding tarpaulin stops * Service door front left * 3 crossmembers * Toolbox rear right * 2 LED work lights * LED reversing lights * LED tail lights with aluminium protection plates * Shovel and broom holder left * Additional hydraulic connections in front of the supports * Full load supports * Single mudguards * Wabco Air Suspension Control box * Moving bulkhead with floor sheet * Folding "A" sign at the rear * 1st owner German trailer!! German documents!! 1st hand!! Note regarding possible errors in the advertisement: Despite careful preparation of this advertisement, errors may occur in the text or the specifications given. We assume no liability for mistakes, alterations, or prior sale. All information is without guarantee. Please contact us to verify details or clarify further questions.

Condition: used, maximum load weight: 30,920 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2021, BENALU Jumboliner Moving Floor Trailer 90.1 m³ * 90.1 cubic meters * SAF axles * 1st and 3rd axle liftable * Alloy rims Bwodpfsy R Ipzex Amnep * Air suspension * Pneumatic controls * Disc brakes * Sliding tarpaulin * Side protection tarpaulin * Smartboard * Double-wing rear door with swivel rod locking * Access ladder and platform at the front wall * ABS connection * 2 x 7-pin power connectors * ISO air connections with red and yellow coupling heads * 21 boards * Service hatch on the front wall * Load pressure gauge * 1 x hydraulic connection on the front wall * 1 x hydraulic connection below between the landing gears Interim sale and errors expressly reserved! Sale exclusively according to our terms and conditions. Important Note: Despite careful verification of all details in our offer, errors may occur. Some inaccuracies may result from data transmission issues between various platform providers. Therefore, all information is supplied without guarantee and does not constitute a legal claim. Legal Notice: This sales listing does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information intended to initiate contract negotiations. The information provided here is non-binding and does not constitute guaranteed properties.

Condition: used, functionality: fully functional, machine/vehicle number: ...634, empty load weight: 8,760 kg, maximum load weight: 25,240 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 01/2022, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, SCHWARZMÜLLER - WALKING FLOOR STEEL FLOOR! ===== 4 units available! ===== Brand: SCHWARZMÜLLER Type: J-Series S1 First registration: 01/2022 Unladen weight: 8,760 kg Payload: 25,240 kg Gross vehicle weight: 34,000 kg Technical max. total weight: 39,000 kg - Robust, wear-resistant L-shaped steel floor profiles -- STEEL FLOOR -- Aluminium chassis -- Volume: approx. 92 m³ -- Reinforced walls, continuous aluminium wear plates on the interior sides -- Aluminium body -- Portal doors -- ABS/EBS -- SAF axles -- Lift axle -- Disc brakes -- Air suspension -- Sliding tarpaulin -- Load protection slat -- Standing platform at the front wall -- Lifting and lowering device Bwedpfx Amoy Ih A Nenjp -- Radio remote control -- Toolbox -- Underrun protection -- Spare wheel holder -- Tyres: 385/65 R22.5 (tread approx. 70% / 80% / 90%) -- etc. Would you like to visit us? We offer a free pick-up service from the train station in 4020 Linz. We handle all customs procedures for you. Want to trade in your used vehicle? ...If we reach an agreement, we are happy to accept it in part exchange. This offer is non-binding and subject to prior sale. Errors and interim sale reserved.

Condition: used, functionality: fully functional, machine/vehicle number: ...630, empty load weight: 8,760 kg, maximum load weight: 25,240 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 01/2022, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, SCHWARZMÜLLER - WALKING FLOOR STEEL FLOOR! ===== 4 units available! Bwodpfxjy Ihu Sj Amnsp ===== Brand: SCHWARZMÜLLER Type: J-Series S1 First registration: 01/2022 Unladen weight: 8,760 kg Payload: 25,240 kg Gross vehicle weight: 34,000 kg Technical max. total weight: 39,000 kg - Robust, wear-resistant L-shaped steel floor profiles -- STEEL FLOOR -- Aluminium chassis -- Volume: approx. 92 m³ -- Reinforced walls, continuous aluminium wear plates on the interior sides -- Aluminium body -- Portal doors -- ABS/EBS -- SAF axles -- Lift axle -- Disc brakes -- Air suspension -- Sliding tarpaulin -- Load protection slat -- Standing platform at the front wall -- Lifting and lowering device -- Radio remote control -- Toolbox -- Underrun protection -- Spare wheel holder -- Tyres: 385/65 R22.5 (tread approx. 70% / 80% / 90%) -- etc. Would you like to visit us? We offer a free pick-up service from the train station in 4020 Linz. We handle all customs procedures for you. Want to trade in your used vehicle? ...If we reach an agreement, we are happy to accept it in part exchange. This offer is non-binding and subject to prior sale. Errors and interim sale reserved.

Condition: used, maximum load weight: 28,120 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 02/2017, next inspection (TÜV): 10/2025, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Knapen K100 92m³ Walking Floor * SAF axles with air suspension and disc brakes * 1st axle liftable Bedpjy Nuqcofx Amnewp * 10 mm floor * Reinforced sidewalls * Work platform with access * Roll-up roof tarpaulin * Side protection tarpaulin * Plastic storage box * Jost outriggers * Work lights * Broom and shovel holder Please contact us for further information.

Condition: used, maximum load weight: 28,040 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2021, next inspection (TÜV): 08/2026, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Knapen Moving Floor K100 92m³ 10mm Floor General Manufacturer: Knapen Trailers * Model / Type: K100 A5060 * Year of manufacture: 2020 * Chassis number: XPN * Country of registration: Germany * Unladen weight: approx. 7,924 kg * Gross vehicle weight: 36,000 kg * Max. axle load: 24,000 kg * Max. kingpin load: 12,000 kg (permitted in country of registration) * Volume: approx. 91.9 m³ * Tapered moving floor semi-trailer * Axle configuration: rigid/rigid/rigid ----Dimensions Exterior length: 13,670 mm * Exterior width: 2,550 mm * Exterior height: 4,000 mm * Interior height front: 2,690 mm * Interior height rear: 2,785 mm * Fifth wheel height: 1,150 mm * Kingpin to 2nd axle: 7,750 mm * Axle spacing 1st-2nd axle: 1,310 mm * Axle spacing 2nd-3rd axle: 1,310 mm ----Axles & Chassis 3 x SAF 9 t Intradisc+ Integral CD Off-Road Axles * All axles rigid * Disc brakes Ø 430 mm * 10-bolt wheel connection * Air suspension with standard control unit on the left in front of the axles * Axle as lift axle, fully automatic via EBS * Includes traction assistance (3x braking) * Radio remote control for lift axle ----Tyres & Rims* Goodyear KMAX T * Tyre size: 385/65 R22.5 * Steel rims 22.5" x 11.75 * 6 wheels complete * No spare wheel ----Body Closed side walls left and right * Sliding partition wall (min. ground clearance 100 mm) * Rear doors with exterior locking bars * One lock rod per door * Upper belt made of steel, swiveling left and right * Platform at the front wall * Ladder at the front wall left and right * Standard cross beams Ø 60.3 mm (4 pieces) * Cross beam compartment: 3 x approx. 4,100 mm * Tarp 680 g/m² (RAL 9006 white aluminium) * Tarp supports with 3 positions (4 pieces) * Lashing straps (4 pieces) ----Floor / Moving Floor Cargofloor System CF-500 SL-C Bwedpfoy Ngbasx Amnop * Electric control * Corrugated aluminium floor boards 10 mm (21 boards) * Fixed front plate * Stainless steel plate at rear under the floor ----Attachments JOST landing legs with sliding compensation * Plastic toolbox left in front of axles (1000 x 500 x 500 mm) * 30 l water tank with soap dispenser * Closed side underrun protection * Swiveling mud flaps * Anti-spray mat on 3rd axle * Long staircase with extendable rear steps and platform * 2 x wheel chocks left * Broom and shovel holder right ----Lighting 6 x round LED tail lights (3-chamber) * LED fog and reversing lights * LED side marker lights (4 pairs) * LED marker lights at the rear * Reflective contour markings according to EU regulation * LED work lights at the rear (radio controlled) * LED work lights at landing legs (radio controlled) * LED LCG-2 switch control unit ----Hydraulics / Connections ISO-N and ISO-S couplers + 15-pin plug * Radio remote control Knapen Trailers V1 * Hydraulic connections centrally at the front wall (vertical) * Pressure line left, return line right * Additional hydraulic connectors at the landing legs * Brake connections available * Acoustic reversing alarm (manually adjustable) ----Paintwork Body painted in RAL 7011 iron grey * Wheel hubs in RAL 2008 light red-orange * Chassis and underside unpainted For further information, I am at your disposal.

Condition: used, maximum load weight: 28,070 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2020, next inspection (TÜV): 03/2027, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Knapen Walking Floor K100 92m³ 10mm Floor New TÜV, brakes, air bellows, etc. replaced General Info • Manufacturer: Knapen Trailers • Model/Type: K100 A5060 • Year of manufacture: 2020 • Chassis number: XPNK0C100LD071956 202003-0071956-r_order-configur? • Country of registration: Germany • Unladen weight: approx. 7,924 kg 202003-0071956-r_order-configur? • Gross vehicle weight: 36,000 kg 202003-0071956-r_order-configur? • Max. axle load: 24,000 kg • Max. king pin load: 12,000 kg (permitted in country of registration) • Volume: approx. 91.9 m³ • Tapered walking floor trailer • Axle design: rigid?rigid?rigid --- Dimensions • External length: 13,670 mm • External width: 2,550 mm • External height: 4,000 mm • Internal height front: 2,690 mm • Internal height rear: 2,785 mm • Fifth wheel height: 1,150 mm • King pin to 2nd axle: 7,750 mm • Axle distance 1st-2nd axle: 1,310 mm • Axle distance 2nd-3rd axle: 1,310 mm --- Axles & Chassis • 3 x SAF 9 t Intradisc+ Integral CD Off-Road axles • All axles rigid • Disc brakes Ø 430 mm • 10-hole wheel connection • Air suspension with standard control panel left in front of axles • Lift axle, fully automatic via EBS • Start assist included (3x braking) • Radio remote control for lift axle --- Tyres & Rims • Goodyear KMAX T • Tyre size: 385/65 R22.5 • Steel rims 22.5" x 11.75 • 6 wheels total • No spare wheel --- Body • Closed side walls left and right • Moving partition wall (min. ground clearance 100 mm) • Rear doors with external locking bars • One locking bar per door • Upper steel belts, left and right swiveling • Platform at front wall • Ladder on front wall left and right • Standard roof bows Ø 60.3 mm (4 units) • Bow storage: 3 x approx. 4,100 mm • Tarp 680 g/m² (RAL 9006 White Aluminum) • Tarp supports 3-position (4 units) • Lashing straps (4 units) --- Floor / Walking Floor • Cargofloor system CF-500 SL-C • Electric control • Ribbed aluminium floor boards 10 mm (21 boards) • Fixed front plate • Stainless steel plate at rear under floor --- Attachments • JOST landing legs with stroke equalization • Plastic toolbox left in front of axles (1000 x 500 x 500 mm) • 30 l water tank with soap dispenser • Closed side underrun protection • Swiveling mud flaps • Anti-spray mat on 3rd axle • Long stairway with extendable rear steps and platform • 2 x wheel chocks left • Broom and shovel holder right --- Lighting • 6 x round LED taillights (3-chamber) • LED fog and reversing lights • LED side marker lights (4 pairs) • LED marker lights at rear • Reflective contour markings according to EU regulations • LED work lights at rear (remote controlled) • LED work lights at landing legs (remote controlled) • LED LCG-2 switch unit Bwjdpsyxa Eksfx Amnep --- Hydraulics/Connections • ISO-N and ISO-S connectors + 15-pin socket • Knapen Trailers V1 radio remote control • Hydraulic connections centrally at front wall (vertical) • Pressure line left, return line right • Additional hydraulic connections at landing legs • Brake connections present • Acoustic reversing signal (manually adjustable) --- Paintwork • Superstructure in RAL 7011 Iron Grey • Wheel hubs in RAL 2008 Bright Red Orange • Chassis and underside unpainted For further information, please feel free to contact me.

Condition: new, functionality: fully functional, empty load weight: 9,000 kg, maximum load weight: 27,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 8,000 kg, first registration: 03/2026, loading space length: 12,600 mm, loading space width: 2,470 mm, loading space height: 2,300 mm, loading space volume: 70 m³, total length: 13,000 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 24R20,5, tire condition: 100 %, wheelbase: 30 mm, maximum speed: 80 km/h, color: grey, trailer brake: trailer braked, Year of construction: 2026, Agrotruck Moving Floor Agrotruck moving floor with tractor unit (Note: The images displayed are SAMPLE IMAGES) Bedpeytqpbjfx Amnowp Tractor unit USED, MAN all-wheel drive, 6 years old, approx. 250,000 km, Agrotruck registration including Agrotruck tyres. Agrotruck moving floor NEW VEHICLE, unladen weight 9 tons, 72 m² cargo volume, 12,600 mm superstructure length, fifth wheel height from 1,230 mm (hydraulics with road tyres) to 1,400 mm (full all-wheel drive with agricultural tyres), high-speed unloading system enables discharge as fast as a pusher trailer, interchangeable tyres. Option 1: 1st axle 445/65R22.5 2nd + 3rd axle 600/65R26.5 Option 2: 1st + 2nd + 3rd axle 445/65R22.5 All wheels are motorway-approved! Air suspension, mechanically forced steering, only moving floor hydraulics required, hydraulic tailgate, two-part automatic tarpaulin, operated in parallel with folding bows, remote control operation.

Condition: new, axle configuration: 3 axles, loading space length: 10,636 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Chassis manufactured using a self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength, component chassis made of ALUMINUM, 140 mm frame height! (max. 39 tons) Axles and Suspension "Disc brake 22.5" Jost axle assemblies, 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the central control unit (without central control unit equipment), 1st + 3rd axles can be lifted separately with an assistance function (without central control unit equipment), 3rd axle additionally equipped with Optiturn, ECAS air suspension, tire pressure monitoring Wabco Trailerpulse with ZF rim-mounted sensors Tires and Wheels Bwodpfxsfakkce Amnop 6 wheels with tires size 385/65 R 22.5, manufacturer's choice, Alcoa aluminum rims DuraBright-11, 75x22.5 ET 120 kingpin screwed into a 10 mm thick plate Fifth Wheel Aluminum swivel landing gear, 2 x 10 tons support load, for air suspension, we use swivel feet Braking System According to E.G. standard, two-line braking system, EBS E-system Wabco with RSS system (Roll Stability Support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator Electrical System According to STVZO guidelines with 2 LED five-chamber lights type Aspöck Europoint LED integrated in the aluminum rear panel, 24-volt system with 1x 5-pole and 2x 7-pole socket, with side marker lights in LED design, 2 separate LED work lights at the rear, 2 LED work lights on the side starting at the 1st axle, at the height of the fifth wheel supports, 1 LED work light inside, at the front left, operated from the outside Body/Tipping Body "Body fully welded inside" Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn, aluminum tipping body, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper belts, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross members, floor load approx. 7 tons/m2, cross members mounted at a relatively close spacing (approx. 350 mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum swing doors, 50/30 mm thick, with 4 swivel rod locking mechanisms, attached in the welded aluminum rear frame in Teflon and stainless steel bearings, moving aluminum side wall suspended on the reinforced aluminum upper belt with "Kevlar liner for complete emptying, lateral brush seal and additional Kevlar liner on the side, integrated discharge chute with foldable cover plate in the floor end, operable from the outside, left rear, viewing window at the rear left, 1 sample slide in the rear doors, thus 2 pieces, service door at the front left Hydraulic System "Cargo Floor sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 670 PE-HD gliders, approx. 6mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed mountings on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed mountings, line size NW 21, fixed mountings with a size and design to be specified, operating pressure 190 max. 240 bar, aluminum end pieces welded into the floor, electrical operation at the rear left with cable operatio

Condition: used, maximum load weight: 28,070 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2021, next inspection (TÜV): 08/2026, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Knapen Moving Floor Trailer K100 92m³ 10mm Floor General Manufacturer: Knapen Trailers * Model/Type: K100 A5060 * Year of manufacture: 2020 * Chassis number: XPNK0C100LD071956 202003-0071956-r_order-configur? * Country of registration: Germany * Unladen weight: approx. 7,924 kg 202003-0071956-r_order-configur? * Gross vehicle weight rating: 36,000 kg 202003-0071956-r_order-configur? * Maximum axle load: 24,000 kg * Maximum kingpin load: 12,000 kg (permitted in country of registration) * Volume: approx. 91.9 m³ * Tapered moving floor semi-trailer * Axle configuration: rigid/rigid/rigid ----Dimensions External length: 13,670 mm * External width: 2,550 mm * External height: 4,000 mm * Internal height front: 2,690 mm * Internal height rear: 2,785 mm * Fifth wheel height: 1,150 mm * Kingpin to 2nd axle: 7,750 mm * Axle spacing 1st/2nd axle: 1,310 mm * Axle spacing 2nd/3rd axle: 1,310 mm ----Axles & Running Gear 3 x SAF 9 t Intradisc+ Integral CD Off-Road Axles * All axles rigid * Disc brakes Ø 430 mm * 10-bolt wheel connection * Air suspension with standard control panel on the left before the axles * Axle function as lift axle, fully automatic via EBS * Including traction aid (3x brakes) * Radio remote control for lift axle ----Tyres & Wheels* Goodyear KMAX T * Tyre size: 385/65 R22.5 Bjdpjymhxgofx Amnjwp * Steel rims 22.5" x 11.75 * 6 wheels in total * No spare wheel ----Bodywork Closed side walls left and right * Sliding partition wall (minimum ground clearance 100 mm) * Rear doors with external locking bars * One locking bar per door * Steel top rail, extendable left and right * Platform at front bulkhead * Ladder on front bulkhead left and right * Standard roof bows Ø 60.3 mm (4 pieces) * Bow space: 3 x approx. 4,100 mm * Curtain 680 g/m² (RAL 9006 White Aluminium) * Curtain supports 3-position (4 pieces) * Tensioning straps (4 pieces) ----Floor / Moving Floor Cargofloor System CF-500 SL-C * Electric operation * Corrugated aluminium floor boards 10 mm (21 boards) * Fixed front plate * Stainless steel plate at rear under the floor ----Mounting Parts JOST landing gear with thrust compensation * Plastic toolbox left in front of axles (1,000 x 500 x 500 mm) * 30 l water tank with soap dispenser * Contiguous side underrun protection * Swinging mudflaps * Antispray mat on 3rd axle * Long rear-mounted ladder with extendable stair and platform * 2 x wheel chocks left * Broom and shovel holder right ----Lighting 6 x round LED tail lights (3-chamber) * LED fog and reversing lights * LED side marker lights (4 pairs) * LED marker lights at rear * Reflective contour marking according to EU regulation * LED work lights at rear (radio-controlled) * LED work lights on landing gear (radio-controlled) * LED LCG-2 switch unit ----Hydraulics / Connections ISO-N and ISO-S plug + 15-pin connector * Knapen Trailers V1 radio remote control * Hydraulic connections centrally on front bulkhead (vertical) * Pressure line left, return line right * Additional hydraulic connections at landing gear * Brake connections present * Audible reversing alarm (manual setting) ----Paintwork Bodywork in RAL 7011 Iron Grey * Wheel hubs in RAL 2008 Light Red Orange * Chassis and underside unpainted For further information, please feel free to contact me.

Condition: used, maximum load weight: 28,530 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2021, next inspection (TÜV): 02/2026, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,550 mm, loading space volume: 85 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Knapen K200 Walking Floor 85m³ * 10 mm floor, 15 floor boards, suitable for bulk materials * SAF axles with air suspension and disc brakes * Roof roll tarp * Movable partition wall Bwsdpfx Ameyhi E Renjp * Tyres 385/65R22.5 * Plastic storage box * BPW landing legs * Broom and shovel holder * Work platform * Work lights For further information, we are happy to assist you

Condition: used, maximum load weight: 28,520 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2021, next inspection (TÜV): 10/2025, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Knapen K200 Moving Floor 92 m³ * BPW axles with air suspension and disc brakes * 1st axle liftable * Tyres 385/65 R22.5 Bwodpfxjx R Rdbj Amnep * Work lights * Sliding roof tarpaulin * Movable partition wall * Spare wheel holder * Work platform with ladder access We are happy to provide further information on request.

Condition: used, empty load weight: 7,920 kg, maximum load weight: 27,080 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,515 mm, loading space width: 2,480 mm, loading space height: 2,725 mm, loading space volume: 93 m³, total length: 13,600 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 7,900 mm, color: black, gearing type: mechanical, Equipment: ABS, Lease rental with no down payment, 72-month term with final balloon payment. Technical Data Weights: - Fifth wheel load: approx. 11,000 kg - Permissible axle load: approx. 24,000 kg - Permissible total weight: approx. 35,000 kg - Unladen weight according to DIN 70020: approx. 7,920 kg - Payload according to DIN 70020: approx. 27,080 kg Dimensions: - Exterior dimensions (body): approx. 13,600 x 2,550 mm - Platform size: approx. 13,515 x 2,480 mm Bwodpfx Amsx Nbgkensp - Rear loading floor height (unladen): approx. 1,142 mm - Clear tarpaulin height at rear: approx. 2,725 mm - Clear tarpaulin height at front: approx. 2,675 mm - Overall front height (unladen): approx. 4,033 mm - Overall rear height (unladen): approx. 4,017 mm - Usable volume: approx. 93.1 m³ - Tractor fifth wheel height: approx. 1,150 mm Chassis: - Integrated chassis frame made of high-quality painted fine-grain steel - Axles: 3 x 9 t axles with disc brakes Z 430 mm, for rims with 120 mm inset; centrally positioned axles - Lifting axle: automatic lifting axle (3rd axle, rear), control via EBS with brake pedal function - 1st axle (front) with traction aid - Disc wheels: 6 x 11.75 x 22.5, on ALCOA alloy rims - Tyres: 6 x 385/55 R 22.5, Continental HTR2 - Suspension: air suspension unit incl. lift and lowering device - Braking system: electronic brake system (EBS) from Knorr, compliant with DIN 7638, RSS activated, with parking brake via spring actuators, brake connections at the front bulkhead - Kingpin: 2'' Jost, compliant with DIN and ISO 1726, exchangeable from below - Landing gear: 2 mechanical, 24 t telescopic landing legs with 2 speeds and equalizing pads Floor: - Aluminum frame resting on the longitudinal members, fitted with 28 welded, closely spaced aluminum I-crossmembers (100 x 100 mm). All I-beams are predrilled at regular intervals on a special drilling jig before welding. Our patented special plastic substructure for guiding the moving floor profiles is mounted with U-brackets. The moving floor profiles are then pulled in via cable system. With this substructure system, we achieve an absolutely straight ...

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Reinforced continuous chassis design, new body manufactured using a self-supporting construction with corresponding reinforcements in the lower belt for exceptionally high stability and strength, 140 mm high reinforced cross members (for high ground load), additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, chassis made of galvanized steel up to the support structure (semitrailer construction max. 39,000 kg). Axles and Suspension: Disc brake 22.5". Jost (DCA) axle units, 3x9 tons with DCA air suspension, lifting and lowering function, Wabco Smartboard information center, electronic brake wear indicator BVA readable in the central control unit (display), 1st axle with starting aid (new EU regulation, without central control unit option), (optional: 1st and 3rd axles can be lifted via a control). Tires and Wheels 6 wheels with tires size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on steel rims, silver, 11.75x22.5 ET 120. Landing Gears Mechanical landing gears with two speeds, 2x 20 tons support load with swivel foot. Braking System According to E.G. standard, EBS E-system Wabco with RSS system (Roll Stability Support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Electrical System According to the guidelines of the EU standards 91/633 and 97/28 with 2 five-chamber lights, type Aspöck Europoint 3 integrated into the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED design, 2 reflective panels at the rear, position lights at the front 2x white, rear 2x red, 2 separate LED reversing lights integrated into the U-protection. Body/Dump Body: Body fully welded inside. Reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminum dump body, side walls with 30 mm thick ALU plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor designed as a sliding floor system on 140 mm aluminum cross members, floor load capacity approx. 9 tons/m2, cross members mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors 50/30 mm thick with 2 swivel rod locks, attached in the welded aluminum rear frame in Teflon bearings and stainless steel bearings, doors secured in the open position with one chain each on the side. Hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, sliding rear discharge wall with Kevlar liner approx. 1,800 mm length plus side Kevlar sealing, service door in the front wall with ladder swinging inwards. Hydraulic System: Cargo - Floor Sliding Floor System Bwjdpfxogcw Rmo Amnop Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE/HD sliders plus anti-lifting slide bearings, type CF 10 mm floor design, hydraulics with approx. 200 mm working stroke, fixed elements on the front wall, separate possibility for connection of the hydraulic line under the vehicle with fixed elements, line size NW 21, fixed elements with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electrical operation at the rear left with remote control integrated into a l

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Bjdpfsyh S Aiox Amnjwp Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Accessories 6 PV

Condition: new, maximum load weight: 28,320 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, Chassis: Design with continuous chassis, newly manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength, reinforced cross members 140mm high (for high ground load), additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, chassis made of galvanized steel up to the support structure. Axles and Suspension: Disc brake 22.5, Jost (DCA) axle assembly design, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard information center, electronic brake wear indicator BVA readable in the central control unit (display), 1st axle with starting aid (new EC regulation, without central control unit option), (optional, 1st and 3rd axles can be lifted). Tires and Wheels: 6 wheels with tires of size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Kingpin: 2" screwed into a 10mm thick plate. Bwodpfx Asfi Nmwemnsp Landing Gear: Mech. support winch with two speeds, 2x 20 tons support load with swivel foot. Braking System: According to EG standard, EBS electronic system Wabco with RSS system (Roll-Stability-Support) and Premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Electrical System: According to the guidelines of EG standard 91/633 and 97/28 with 2 five-chamber lights, type Aspöck Europoint, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED version, 2 reflective panels on the rear, position lights at the front 2x white, rear 2x red, 2 separate halogen reversing lights integrated in the U-profile. Body/Dump Body: Body fully welded inside, reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400 dkn/10,400, aluminum dump body, side walls 30mm thick aluminum plank profiles (2-3 mm) 600mm wide, completely welded with upper and lower belts, plank profiles fully welded inside, floor laid as a sliding floor system on 140mm aluminum cross members, floor load capacity approx. 9 tons/m2, cross members mounted closely together (approx. 350mm), design with special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors 50/30mm thick with 2 swivel rod locking mechanisms, fastened in the welded aluminum rear frame in Teflon bearings and stainless steel bearings, doors secured in the open position with one chain each on the side, hard wear plates on the side walls approx. 2000x1500x4mm, fully welded, moving residual emptying wall with Kevlar sheeting approx. 1800mm length plus side brushes with Kevlar sheeting seal, service door in the front wall with ladder, folding inwards. Hydraulic System: Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD sliders plus anti-lifting slide bearings, type CF 10mm floor design, hydraulics with approx. 200mm working stroke, fixed points on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed points, line size NW 21, fixed points with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric operation behind the left side with remote control integrated in a lockable waterproof box, without hydraulic hoses. Accessories: 6 PVC mudguards with 2 anti-splash mud fla

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, -Panama Plane 900g -10 mm floor -V-shaped sheet metal 2000x1500x4 -Service door on the front panel -12 pairs of lashing eyes on the front panel Chassis: Design with continuous, reinforced chassis, new body manufactured in a self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high, reinforced design Axle and suspension: Disc brake 22.5 Jost axle assembly, 3*9 tons with DCA - air suspension, lift and lower function, Wabco Smartboard, electronic brake wear indicator BVA, 1st axle with start assist (without SZM equipment) Tires and wheels: 6 wheels with tires size 385/65 R 22.5, premium tires, on steel rims, 11.75*22.5 ET 120 Kingpin: Mechanical support winch, 2x20 tons support load Braking system: EBS E system Wabco with RSS system (Roll Stability Support) and premium modulator, spring brake system acting on two axles with operation at the rear Electrical system: According to the guidelines of EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the aluminum rear panel, 24 Volt system with 1*15-pole and 2*7-pole socket, with side marker lights in LED design 2 separate LED reversing lights integrated in the U-shaped protection, Body/tipper bed: "Body fully welded inside", reinforced side walls Aluminum tipper bed, side walls with 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper chord, plank profiles fully welded inside, aluminum front panel with 600 mm plank profile, 2-3 mm thick, in a straight design, with 2 aluminum wing doors 50/30 mm thick, sliding residual unloading wall with Kevlar sheet approx. 1,500 mm long plus side Kevlar seal Hydraulic system: "Cargo Floor" sliding floor system Bwedpfx Amjfi Nmpsnsp Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles, mounted with approx. 880 PE-HD gliders, type CF 8 mm floor design, fixed parts on the front panel, separate possibility for connecting the hydraulic line under the vehicle with fixed parts, operating pressure 190 - max. 240 bar, aluminum end pieces welded into the sliding floor, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray mud flaps, 1 aluminum spare wheel holder, side aluminum approach guard in foldable design, 1 toolbox approx. 860*460*400 mm in plastic, 3.7m aluminum ladder, tarpaulin approx. 660g/m2 with tarpaulin system incl. tarpaulin rail, with side tension straps or quick release fastener, walkway on the front panel with access ladder, 3 steel locking bars with locking mechanism, swiveling and lockable, aluminum protective cover with hinges for the lighting, etc. +590¤ Delivery costs Unladen weight: approx. 7,700 kg Offer and images subject to change.

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis Manufactured using a self-supporting aluminum design with appropriate reinforcements in the lower belt for exceptionally high stability and strength. Subframe made of aluminum, 140 mm frame height (max. 39 tons), axles and suspension: disc brakes 22.5", Jost axle assemblies, 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the central control unit (without central control unit equipment), 1st and 3rd axles can be lifted separately with start-assist function (without central control unit equipment), 3rd axle additionally equipped with Optiturn, ECAS air suspension. Bwedpsgcw Riefx Amnep Tires and Wheels 6 wheels with tires size 385/65 R 22.5, manufacturer's choice, on Alcoa aluminum rims, satin finish, 11.75x22.5 ET 120 (with steel rims + approx. 120 kg). Kingpin Aluminum landing gear, manufacturer: Alu-Leg, 2 x 10 tons support load, swivel feet used for air suspension. Braking System According to E.E.G. standard, two-circuit braking system, EBS E system Wabco with RSS system (Roll Stability Support), spring-loaded brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator. Electrical System According to STVZO guidelines with 2 five-chamber lights, type Aspöck Europoint III, integrated in the aluminum rear panel, 24-volt system with 1 x 15-pin and 2 x 7-pin socket, with side outline lights in LED design, 2 work lights at the rear, 2 LED work lights on the side at the height of the kingpin, 1 LED work light inside at the front left, operable from the outside. Body/Container "Body fully welded inside" Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn, aluminum container, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper belt, plank profiles fully welded inside! Floor designed as a sliding floor system on 140 mm aluminum cross members, floor load capacity approx. 7 tons/m2, cross members mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors, 50/30 mm thick with 4 swivel rod locks, mounted in a welded aluminum rear frame in Teflon and stainless steel bearings, running aluminum wall suspended in the reinforced aluminum upper belt with "Kevlar liner" for complete unloading, lateral brush seal and additional Kevlar liner on the side, integrated discharge chute with folding cover plate in the floor closure, operable from the outside, left rear, viewing window at the rear left, 1 sample slide in the rear doors, i.e. 2 pieces, service door on the left in the front wall. Hydraulic System "Cargo Floor" 24 plank system - smooth design! Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD gliders, approx. 8 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed brackets on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed brackets, line size NW 21, fixed brackets with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded in the floor, actuation at the rear left with cable operation in a lockable, waterproof box, or hydraulic hoses. Accessories PVC mudguards with rubber splash guards, aluminu

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2016, total length: 14,010 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 50 %, wheelbase: 9,110 mm, color: other, Year of construction: 2016, Equipment: ABS, = Additional options and accessories = - Disc brakes - SAF Assen = Remarks = Superstructure Volume: 92 m3 = More information = Axle configuration Tyre size: 385/65 Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile: 50% Bjdpjzhtcfjfx Amnswp Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 7.300 kg Carrying capacity: 34.700 kg GVW: 42.000 kg Identification Registration number: OP-65-HN

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,700 kg, maximum load weight: 28,300 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,460 mm, loading space width: 2,470 mm, loading space volume: 92 m³, total length: 13,800 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 r22.5, tire condition: 100 %, Additional information Chassis Fine-grained steel welded construction in lightweight design, extending to the support legs; kingpin plate with 2 replaceable kingpins Lateral floor preparation for lashing eyes 24-ton, two-speed support legs, single-sided operation, with straight lower part, without shock absorption Extendable ladder at the rear Door latch on the side 2 wheel chocks with holder Aluminum side impact protection Steel underrun protection with wide Fliegl mud flaps; foldable mudguard for lighting unit Quarter panel fenders Rear impact protection Aluminum ladder approx. 3,550 mm, with holder on the side Tarpaulin rod with holder 1 plastic toolbox, with drawer and insert, b=650 / h=520 / d=670 mm, lockable with a padlock (padlock not included) 1 spare wheel holder for 1 spare wheel, with wheel fastening kit Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting aid, actuated by 3x braking (starting aid functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Braking system 2-line compressed air braking system; color-coded lines for easy maintenance Spring brake parking brake 2 fail-safe coupling heads at the front, without connection line EBS, Electronic Braking System with EBS socket at the front, without connection cable With raise and lower valve Vehicle - Driving stability system Wheels and tires 385/55 R22.5, according to manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connection cable Sliding floor hydraulics Hydraulic cylinder with sliding mechanism installed in the floor; 2-circuit hydraulic system Switching between forward/backward movement electrically via remote control with cable - Sliding floor power supply via parking lights Actuation hydraulically via truck PTO Hydraulic connection with hose at the front wall and HDK screw connector NW = 48 mm Note: A 2-circuit hydraulic system is required! Recommended pump output: Flow rate: 110 l/min Pressure: 250 bar Bwodpfx Asi Riywsmnop Minimum oil tank filling: 100 l Sliding floor Sliding floor with wear plate at the rear Floor boards made of aluminum, 8 mm floor profile, ribbed design Tipping body Aluminum tipping body made of high-quality, abrasion-resistant material. Front and side walls made of aluminum hollow profiles, welded together at the top all around with a wide special reinforcement profile made of aluminum, welded to a special frame at the bottom. Sliding wall for better unloading of the load, with reinforced tarpaulin flaps at the bottom with rail cleaner Rear wall made of aluminum hollow profiles, as a 2-wing door, with a division of 1/2 to 1/2, framed all around with a special U-profile with stop and rubber seal, with 2 pieces of externally mounted swivel bolts, locked at the top and bottom. Rear wall with mechanical safety locking, operation at the rear on the driver's side. With pivoting crossbar at the top. The door locks can be locked with a padlock. Standing platform with access ladder on both sides in driving direction left/right and railing, for opening

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 7,550 kg, maximum load weight: 27,450 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/55 r22.5, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis Fine-grained steel welded construction in lightweight design, up to the support legs, drawbar with interchangeable 2 kingpin Laterally in the floor with lashing eye preparation (max. 13 pairs) 24 ton, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation Extendable ladder at the rear Door lock on the side 2 wheel chocks + holder Aluminum side impact protection Steel underrun protection with wide Fliegl mud flaps, foldable fender for light unit Quarter panel fenders Rear impact protection Aluminum ladder approx. 3,550 mm, with holder on the side Tarpaulin rod with bracket 1 plastic toolbox, with drawer and insert, w=650/h=520/d=670 mm, can be locked with a padlock 1 spare wheel holder for 1 spare wheel, with wheel fastening kit Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering & starting assist, actuated 3x by the brakes (starting assist is functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Braking System 2-line pneumatic braking system, color-coded lines for easy servicing Spring brake parking brake 2 non-interchangeable coupling heads at the front EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle Stability System Bwjdpfx Aji Riwxomnsp Wheels & Tires 385/55R22.5 according to manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front Self-Loading System (SBS) Hydraulic cylinder with sliding mechanism installed in the floor. 2-circuit hydraulic system. Switching between forward/reverse operation is done electrically via remote control with cable. -Shovel floor power supply via side marker light Actuation hydraulically via truck auxiliary drive Hydraulic connection with hose on the front wall and HDK screw connector NW = 48 mm, Note: A 2-circuit hydraulic system is required! Recommended pump performance: Flow rate: 110 l/min Pressure: 250 bar Oil tank filling min: 100 l Self-Loading System (SBS) Floor Sliding floor with wear plate at the rear Floor boards made of aluminum, 8 mm floor profile, ribbed design SBS Tipper Body Aluminum box tipper body, front and side walls made of aluminum hollow profiles, welded around the top with a wide special reinforcement profile made of aluminum, and welded with a special frame at the bottom. Sliding wall for better unloading of the load, with reinforced tarpaulin flaps at the bottom. Rear wall made of aluminum hollow profiles, as a 2-wing door, with a division of 1/2 to 1/2, framed all around with a special U-profile with stop and rubber seal, with 2 externally mounted swivel locking rods, locked at the top & bottom. Rear wall with mechanical safety locking, operation at the rear on the left in the direction of travel. With pivoting crossbar at the top. The door locks can be locked with a padlock. Standing platfor

Condition: used, axle configuration: 3 axles, first registration: 06/2023, total length: 13,250 mm, total width: 2,470 mm, total height: 2,650 mm, suspension: air, tire size: 385/65/22.5, color: other, Year of construction: 2023, Equipment: ABS, = Additional Options and Accessories = - Rear doors - Air suspension = Further Information = Bjdpjzhmmksfx Amnewp Tire size: 385/65/22.5 Brakes: Disc brakes Suspension: Air suspension Unladen weight: 7,990 kg Payload: 31,010 kg GVWR: 39,000 kg Damage: None License plate: QAQV363

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2020, loading space length: 13,300 mm, loading space width: 2,480 mm, loading space height: 2,660 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 9,060 mm, color: silver, Year of construction: 2020, Equipment: ABS, = Additional Options and Accessories = - Rear doors - Lift axle - Air suspension - Fog lights Bsdpfx Amjzgapcenowp - Tool box = Further Information = Axle configuration Tire size: 385/65 R 22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tire tread depth left: 50%; Tire tread depth right: 50% Rear axle 2: Max. axle load: 9000 kg; Tire tread depth left: 40%; Tire tread depth right: 40% Rear axle 3: Max. axle load: 9000 kg; Tire tread depth left: 50%; Tire tread depth right: 40% Weights Unladen weight: 7,840 kg Payload: 34,160 kg GVW: 42,000 kg Condition Technical condition: very good Optical condition: good Identification License plate: OS-55-JD

Condition: used, axle configuration: 3 axles, first registration: 06/2012, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2012, Axle configuration Tyre size: 385/65 R22.5 Axle brand: Mercedes-Benz Brakes: disc brakes Rear axle 1: aluminium rims; lift axle; tyre tread left: 12 mm; tyre tread right: 12 mm Bodpfx Amszgl Iwonowp Rear axle 2: aluminium rims; tyre tread left: 5 mm; suspension: air suspension Rear axle 3: tyre tread left: 12 mm; tyre tread right: 12 mm; suspension: air suspension Weights Unladen weight: 8,320 kg Payload: 30,680 kg Gross vehicle weight: 39,000 kg Condition Damage: none

Condition: used, functionality: fully functional, machine/vehicle number: 2185, empty load weight: 6,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2011, next inspection (TÜV): 02/2027, loading space volume: 40 m³, suspension: air, tire size: 385/65/22.5, wheelbase: 1,310 mm, color: silver, trailer brake: trailer braked, Year of construction: 2011, Equipment: ABS, Schmitz aluminum body with steel chassis, 40 m³, lift axle, roll tarp, platform, folding underrun guard, Schmitz axles with disc brakes, Quicksilver plastic wear-resistant floor, rear door in 11/25, grain slide, German-made semi-trailer. Bwsdpfx Aozdb Icjmnsp Sold only to commercial businesses and with exclusion of any warranty. We deliver to any German seaport.