Used 3D Volume Scale Silence 600 for sale (20,826)

Condition: used, all stainless steel Njdezwdb Depfx Ahnolf mobile adjustable speed belt width 600 mm with air knife dimensions (l x w x h) : ± 3.250 x 1.000 x 2.000 mm

Condition: like new (used), Year of construction: 2023, Shimadzu LC-2050C 3D + RF-20AXS – Complete HPLC System – 2023 For sale is a high-end Shimadzu LC-2050C 3D liquid chromatograph, additionally equipped with a Shimadzu RF-20AXS fluorescence detector. Both instruments were manufactured in 2023. The set is unused and in very good cosmetic condition. System Configuration • Shimadzu LC-2050C 3D – Integrated HPLC System • Built-in PDA (Photodiode Array) detector • Shimadzu RF-20AXS – External FLD (Fluorescence Detector) • Integrated autosampler • Sample cooling • Column thermostat • Four-component low-pressure gradient • Integrated touchscreen panel • Dell computer • UPS / Emergency power supply • Accessories and cables as shown in the photos Shimadzu LC-2050C 3D – Key Parameters Pump • Flow rate setting range: 0.0001–10 mL/min • Four-component low-pressure gradient • Gradient setting range: 0–100%, step 0.1% • Maximum pressure: • 50 MPa at flow rates of 0.0001–3 mL/min • 44 MPa at flow rates of 3.0001–5 mL/min • 22 MPa at flow rates of 5.0001–10 mL/min • Integrated mobile phase degassing system Autosampler • Automatic sample injector • Sample injection volume range (standard configuration): 0.1–100 µL • Sample injection volume accuracy: ±1% at 50 µL • Sample cooling/thermostating capability • Sample cooling temperature range: 4–45°C PDA Detector The LC-2050C 3D version features an integrated PDA (Photodiode Array) detector, enabling spectral recording and analysis of multiple wavelengths. Thanks to the PDA detector, the system allows not only for standard chromatographic analysis but also for spectral evaluation of detected substances. Shimadzu RF-20AXS Fluorescence Detector The system has been additionally equipped with a high-sensitivity RF-20AXS fluorescence detector, significantly increasing the analytical capabilities of the entire set. RF-20AXS Parameters • Light source: Xenon lamp • Additional low-pressure mercury lamp for wavelength accuracy control • Wavelength range: 200–750 nm • Spectral bandwidth: 20 nm • Wavelength accuracy: ±2 nm • Wavelength repeatability: ±0.2 nm • S/N for the Raman peak of water: ≥2000 • Standard flow cell: 12 µL • Maximum cell pressure: 2 MPa • Cell thermostat • Ability to monitor two pairs of excitation/emission wavelengths simultaneously The combination of PDA + FLD (Fluorescence Detector) provides a wide range of analytical capabilities and allows for the determination of both standard UV/Vis absorbing compounds and substances requiring highly sensitive fluorescence detection. Device Data Shimadzu LC-2050C 3D • CAT. NO.: 228-65822-58 • Year of manufacture: 2023 Shimadzu RF-20AXS • CAT. NO.: 228-65305-58 • Year of manufacture: 2023 Application The system is intended for, among others: • Pharmaceutical laboratories • Quality control Nlsdpjzv Salofx Ahnjf • Chemical laboratories • Food industry • Environmental research • Research and development laboratories • HPLC analyses requiring PDA detection • Trace analyses using fluorescence detection Condition Year of manufacture: 2023 Device is unused. Very good cosmetic condition – consistent with the photos. Sale of a complete set: Shimadzu LC-2050C 3D + RF-20AXS + Dell computer + UPS + accessories shown in the photos. Additional photos, serial numbers, and information about the device can be provided upon request.

Condition: good (used), Year of construction: 1981, operating hours: 376 h, functionality: fully functional, machine/vehicle number: 01031, total height: 3,200 mm, total width: 1,900 mm, total length: 2,500 mm, table width: 570 mm, table length: 670 mm, overall weight: 10,000 kg, clamping force: 400 kN, input frequency: 50 Hz, input current: 25 A, power: 7.5 kW (10.20 HP), REIS TUS 600 K Coating Press - Operating voltage: 380/260 V Attention: The item must be picked up between September 8 and September 10, 2026, on a date to be confirmed. Nlsdpfx Aszlfb Iehnof FCA D-63128 Dietzenbach - loaded onto a truck.

Condition: good (used), functionality: fully functional, total length: 900 mm, total height: 2,000 mm, total width: 800 mm, overall weight: 500 kg, input voltage: 240 V, input current: 12 A, STRATASYS DIMENSION SST 1200 3D Printer - Frequency: 50/60 Hz - Rated current: 12 - 6 A - Internal dimensions: approx. 400 x 400 x 500 mm - Includes matching accessories Nedpezldwhsfx Ahnelf Note: The item must be collected between September 8th and September 10th, 2026, on a date to be confirmed. FCA D-63128 Dietzenbach – loaded onto a truck.

Condition: excellent (used), Year of construction: 2006, ARBURG 370 S — 600-290 | Screw ø 35 mm 📐 CLAMPING UNIT Clamping force: 600 kN Closing force: 38 kN Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Mould height min.: 200 mm Daylight max.: 600 mm Nodpfxozrwz Tj Ahnolf Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm ⚙️ HYDRAULICS Drive power: 15 kW Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Nozzle heating: 0,6 kW Hopper capacity: 50 l 📦 DIMENSIONS & WEIGHT Oil capacity: 135 l Net weight: 3300 kg Electrical connection: 80 A

Condition: excellent (used), Year of construction: 2009, Arburg 370 S 600-290 (2009) Screw ø 35 mm 📐 CLAMPING UNIT Clamping force: 600 kN Closing force: 38 kN Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Mould height min.: 200 mm Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm ⚙️ HYDRAULICS Drive power: 15 kW Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Nedpozrvy Usfx Ahnjlf Nozzle heating: 0,6 kW Hopper capacity: 50 l 📦 DIMENSIONS & WEIGHT Oil capacity: 135 l Net weight: 3300 kg Electrical connection: 80 A

Condition: excellent (used), Year of construction: 2009, ARBURG 370 S — 600-290 Screw ø 35 mm 📐 CLAMPING UNIT Clamping force: 600 kN Closing force: 38 kN Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Mould height min.: 200 mm Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm ⚙️ HYDRAULICS Drive power: 15 kW Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Nozzle heating: 0,6 kW Hopper capacity: 50 l 📦 DIMENSIONS & WEIGHT Oil capacity: 135 l Net weight: 3300 kg Nledpfx Ajzrv Tzohnef Electrical connection: 80 A

Condition: good (used), Year of construction: 2006, Demag systec 160/520-430 (2010) Nlsdpoyyzpysfx Ahnjf

Condition: excellent (used), Year of construction: 2009, Arburg 370 S 600-290 (2009) Screw ø 35 mm CLAMPING UNIT Clamping force: 600 kN Closing force: 38 kN Nlodpfezrv Dtox Ahnef Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Mould height min.: 200 mm Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm HYDRAULICS Drive power: 15 kW Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Nozzle heating: 0,6 kW Hopper capacity: 50 l DIMENSIONS & WEIGHT Oil capacity: 135 l Net weight: 3300 kg Electrical connection: 80 A

Condition: excellent (used), Year of construction: 2009, ARBURG 370 S — 600-290 | Screw ø 35 mm 📐 CLAMPING UNIT Clamping force: 600 kN Closing force: 38 kN Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Mould height min.: 200 mm Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Nlsdpfx Aey Nmkbehnof Ejector force: 125 kN Ejector stroke: 125 mm ⚙️ HYDRAULICS Drive power: 15 kW Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Nozzle heating: 0,6 kW Hopper capacity: 50 l 📦 DIMENSIONS & WEIGHT Oil capacity: 135 l Net weight: 3300 kg Electrical connection: 80 A

Condition: excellent (used), Year of construction: 2010, clamping force: 600 kN, Equipment: documentation/manual, Clamping force: 60 t Screw diameter: 20 mm Distance between tie bars V: 370 mm Distance between tie bars H: 370 mm Type: Horizontal Drive: Hydraulic Engine hours : 60,700 h Hydraulic circuits : 1 x Nodezn I H Ejpfx Ahnolf Hot runners : 6 x Robot interface : NO

Condition: excellent (used), Year of construction: 2008, Arburg 370 S 600-290 (2008) Screw ø 35 mm 📐 CLAMPING UNIT Clamping force: 600 kN Closing force: 38 kN Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Mould height min.: 200 mm Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm ⚙️ HYDRAULICS Drive power: 15 kW Njdszrvwtopfx Ahnolf Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Nozzle heating: 0,6 kW Hopper capacity: 50 l 📦 DIMENSIONS & WEIGHT Oil capacity: 135 l Net weight: 3300 kg

Condition: excellent (used), Year of construction: 2009, Arburg 370 S 600-290 (2009) Screw ø 35 mm 📐 CLAMPING UNIT Clamping force: 600 kN Closing force: 38 kN Opening force / increased: 24 / 160 kN Nedpfxszrv Eqj Ahnjlf Opening stroke: 400 mm Mould height min.: 200 mm Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm ⚙️ HYDRAULICS Drive power: 15 kW Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Nozzle heating: 0,6 kW Hopper capacity: 50 l 📦 DIMENSIONS & WEIGHT Oil capacity: 135 l Net weight: 3300 kg Electrical connection: 80 A

Condition: excellent (used), Year of construction: 2009, ARBURG 370 S — 600-290 Screw ø 35 mm 📐 CLAMPING UNIT Clamping force: 600 kN Closing force: 38 kN Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Nedpfxjzrv N Nj Ahnelf Mould height min.: 200 mm Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm ⚙️ HYDRAULICS Drive power: 15 kW Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Nozzle heating: 0,6 kW Hopper capacity: 50 l 📦 DIMENSIONS & WEIGHT Oil capacity: 135 l Net weight: 3300 kg Electrical connection: 80 A

Condition: excellent (used), Year of construction: 2006, Arburg 370 S 600-290 (2006) Screw ø 35 mm 📐 CLAMPING UNIT Clamping force: 600 kN Closing force: 38 kN Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Mould height min.: 200 mm Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm Njdpfxezrv Iro Ahnjlf ⚙️ HYDRAULICS Drive power: 15 kW Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Nozzle heating: 0,6 kW Hopper capacity: 50 l 📦 DIMENSIONS & WEIGHT Oil capacity: 135 l Net weight: 3300 kg Electrical connection: 80 A

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 9,749 h, load capacity: 2,500 kg, lifting height: 5,480 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, drive type: Elektro, Electric 4-wheel forklift Nledpfxezvia Ne Ahnjf Load center: 600 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Battery voltage: 80V Battery capacity: 775Ah Battery manufacturer: stuba Battery type: PzS Battery year of manufacture: 2022 Battery condition: 80 - 100% Description: The vehicle will undergo UVV inspection. Before delivery, the machine will receive a service and be cleaned. Upon request, the machine can be painted for an additional charge. Drum clamp, side shifter, 3rd valve, 4th valve, front work light.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,578 h, load capacity: 4,000 kg, lifting height: 4,670 mm, free lift: 1,644 mm, fuel type: electric, mast type: triplex, construction height: 2,360 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire condition: 40 - 60% Battery voltage: 80V Battery Ah: 775Ah Battery type: PzS Battery year of manufacture: 2019 Battery condition: 80 - 100% Description: The vehicle will be inspected according to UVV regulations. Before delivery, the machine will receive a service and be cleaned. Upon request, the machine can be painted for an additional cost. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, full free lift, Nodozviavjpfx Ahnolf

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 8,310 h, load capacity: 2,000 kg, lifting height: 4,715 mm, free lift: 1,611 mm, fuel type: gas, mast type: triplex, construction height: 2,154 mm, drive type: Treibgas, LPG forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Description: Half cabin Sideshift, fork positioner, 3rd valve, 4th valve, Nlodpfx Aezwiwwohnef

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 15,443 h, load capacity: 2,000 kg, lifting height: 3,450 mm, fuel type: diesel, mast type: simplex, construction height: 2,377 mm, drive type: Diesel, Diesel forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Standard Njdpfx Aozwit Eehnelf Condition: Ready for use and fully functional Technical condition: good Description: Half cabin 3rd valve

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 9,487 h, load capacity: 2,500 kg, lifting height: 3,250 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 2,354 mm, drive type: Elektro, Electric 4-wheel forklift Njdpfoy N E Hhsx Ahnelf Load center: 600 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Standard Technical condition: Good Battery voltage: 80V Battery capacity: 700Ah Battery type: PzS Description: Sideshift, fork positioner, 3rd valve, 4th valve, rear working light, front working light, full cabin, joystick, LED, seat,

Condition: not inspected (used), functionality: unexamined, Leased vehicle returned Nlsdpezu Sflofx Ahnsf Unfortunately, we cannot answer any further questions. Serial number: R5A006433 Stock ID: 13840614 Approximate transport dimensions: 55x45x45, approximately 30 kg

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 7,780 h, load capacity: 5,000 kg, lifting height: 6,365 mm, free lift: 2,260 mm, fuel type: diesel, mast type: triplex, construction height: 3,276 mm, drive type: Diesel, Diesel forklift Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Nedpfx Aoy Ab Smehnolf Front tire type: Superelastic Rear tire type: Superelastic 3rd valve, 4th valve, rear work light, front work light, heater, soot filter, compliant with STVZO (German Road Traffic Act), full cabin, air conditioning, interior mirror, rotating beacon, fabric seat cushion, BlueSpot front and rear, dust protection, double pedal

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 7,473 h, load capacity: 5,000 kg, lifting height: 4,100 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,971 mm, drive type: Diesel, Diesel forklift Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Rear tire type: Superelastic 3rd valve, 4th valve, rear work light, front work light, heater, soot filter, STVZO compliant, full cab, air conditioning, interior mirror, Njdpoyh R Ukefx Ahnolf fabric seat cushion, clipboard with LED lighting, nitrogen accumulator, BlueSpot rear, dust protection, double pedal.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 4,541 h, load capacity: 5,000 kg, lifting height: 3,200 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,471 mm, drive type: Diesel, Diesel forklift Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Nlsdpfeyk Nbdsx Ahnsf Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% 3rd valve, work light (rear), work light (front), heater, soot filter, full cab, interior mirror, plastic seat cushion, BlueSpot (rear), dust protection, trailer coupling, single pedal.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 7,335 h, load capacity: 5,000 kg, lifting height: 4,100 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,971 mm, drive type: Diesel, Diesel forklift Nodpfoyh R Udex Ahnjlf ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Rear tire type: Superelastic 3rd valve, 4th valve, rear work light, front work light, heater, soot filter, compliant with German Road Traffic Licensing Regulations (STVZO), full cabin, air conditioning, interior mirror, nitrogen bladder, fabric seat cushions, clipboard with LED lighting, BlueSpot (safety zone warning light) at the rear, dust protection, double pedal.