Used 4-Side Sanding Machine for sale (1,07,857)

Condition: new, Number of sanding units 2 St. sanding width 190 mm Sanding height max. 2-180 mm LÖWER double-sided grinding machine DSM 2000 ----- Double-sided single wood sander for sanding Solid wood such as window wood etc. Stable top quality Guide with long casting tables, brushing and finishing equipment and conveyor belt feed. Suitable for high continuous loads even with higher chip removals. - Staggered sanding and finishing units at the top and bottom - Directly driven rubberized grinding rollers for slip-free power transmission - Combined grinding via roller and shoe for high chip removal at the same time flat intervention zone - Maintenance and wear-free CERMET-coated sanding shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and higher grinding Grinding belt service life - Forced pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the sanding rollers Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large sanding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom using a precision threaded spindle Dimension display via scale ring (resolution 0.1mm) - Sanding belt tension via pneumatic cylinders with constant clamping pressure - Sanding belt change with pneumatic belt relaxation in seconds - Adjustment of the sanding belt run when changing the belt - electro-pneumatic compressed air monitoring - Run-in protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated non-slip and non-stick conveyor belts Hfedpfxevu Hdte Aftjl over heavy, 1000mm long cast tables with a finely planed surface and Spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and even workpiece transport - Feed gear motor with three different feed speeds for quick adaptation to different types of wood - all motors electrically protected - Ergonomically arranged controls on the workpiece inlet side - automatic workpiece thickness scanning (no previous measurement necessary) - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800mm - Sanding belt width: 200mm - Working width: 190mm - Grinding thickness: 2-180mm - two brake motors for drive: 5.5 kW - Feed motor: 1.0 kW - Feed speed: 6, 11 and 16 m/min. - automatic height adjustment: 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle: 2 x 120mm and 2 x 150mm - Pneumatic connection 6 bar - Working height: 850mm - Length: 2105mm - Length with control panel 2490mm - Width: 880mm - Height: 1910mm - Weight: approx. 1500 kg - Operating voltage: 400 volts, 50 Hz, 3P - CE version ----- ----- Basic price of the machine on request! ----- ----- Special accessories with surcharge: continuous feed 4-20 m/min. for speed adjustment to the previous machine Price on request Workpiece blow-off - using nozzles from above and below at the machine ...

Condition: used, Year of construction: 2006, - Veneer bundle length (fiber direction): 400 - 4000 mm - Veneer bundle widths (perpendicular to the fiber direction): 45 - 515 mm - Veneer bundle thickness: approx. 10 - 40 - Throughput speed: approx. 27 m/min. Double gluing machine for veneer Manufacturer: Monguzzi, Carugate Type: Gluemaster Year of manufacture: 2006 Hfjdjzuzp Tspfx Aftsl For reliable, uniform, and precise application of PVAc or UREA adhesive in a single pass on veneer bundles that are joined parallel on both sides. Fine adjustment of the adhesive quantity and the uniformly applied lateral and vertical pressure on the veneer bundle result in precise, spot-free, and perfectly glued veneers with minimal adhesive consumption. Technical data: Veneer bundle length (fiber direction): 400 - 4000 mm Veneer bundle widths (perpendicular to the fiber direction): 45 - 515 mm Veneer bundle thickness: approx. 10 - 40 Throughput speed: approx. 27 m/min. Special features: - The Gluemaster can be positioned directly next to a veneer gluing machine. - Quickly and easily accessible adhesive containers for fast and easy refilling or cleaning. - Tool-free removal of the adhesive containers and easy cleaning (no dead spots). - Continuous pressure rollers and large pressure plates for uniform pressure on the veneer bundle/edges during gluing. - Rigid 4-point upper roller guide with floating upper rollers to press the veneer bundle without damaging it. - Easily adjustable adhesive quantity. Adhesive pot cooling unit For a longer service life of the adhesive pot, especially recommended for the use of UREA adhesive. 1 motorized discharge roller conveyor To feed the glued veneer bundle out of the Gluemaster and transport it to the connected Fanningmaster. Length of the roller conveyor: 3600 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1946, CB VERA 1000 sanding-brushing machine, fully functional. Sold together with brushes and interchangeable inserts for them. Hfedoynkxrjpfx Aftjl

Condition: used, Year of construction: 2010, - Release agent application, top and bottom - Scoring saw with 2.2 kW motor - Trimming unit with 8.0 kW motor - Double milling unit with 2 motors, each 4.5 kW - Gluing unit - End trimming unit - Flush trimming unit - Multi-function unit - Multi-profile edge trimming unit - Spray nozzles, top and bottom - Flat edge trimming unit - Buffing unit - Grooving unit Double-sided edge banding machine Manufacturer: IMA Type: Combima/II/390/B/L12 Year of manufacture: 2010 For longitudinal and transverse feed - 2 low-maintenance precision roller chains with 75 mm wide and 85 mm long, rubber-coated chain plates, with cams - Spacing 1080 mm. Pneumatically adjustable to heights of 8, 16 or 24 mm. ICOS OPEN control system - Max. feed width 3,300 mm - Program-controlled master + slave width adjustment - Fixed stop on the left in feed direction Workpiece dimensions - Min. feed width 244 mm (for longitudinal processing) - Max. workpiece width (chain extension) 1,300 mm - Min. workpiece thickness 8 mm - Max. workpiece thickness 45 mm (with copying function) / 60 mm (without copying) Edge material: - Min. height 14 mm, max. height 65 mm - Roll material min. thickness 0.3 mm, max. thickness 3 mm Strips and edgebanding: - Min. thickness 0.8 mm, max. thickness 12 mm Feed speed - 10 - 50 m/min. with frequency-controlled drive. Infeed device - with 5 top-mounted, inclined and driven rollers. Center support with roller track - automatically lowerable and automatically centering. Equipped on each side with: Release agent application, top and bottom Scoring saw with 2.2 kW motor, 100 Hz, 6,000 RPM, pneumatically controlled. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Trimming unit with 8.0 kW motor, 100 Hz, 6,000 RPM. - Electronic positioning for stepless horizontal adjustment. Double milling unit with 2 motors, each 4.5 kW, 150 Hz, 9,000 RPM. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Gluing unit for hot melt adhesive - With single roll/edgebanding magazine for roll material up to 3 mm and edgebanding up to 12 mm - 2-fold roll magazine for roll materials up to 3 mm (can be attached to the single roll magazine) - Horizontal roll holder End trimming unit - Mounted on the upper pressure beam, with 2 motors, each 660 W, 200 Hz - Pneumatic swivel 0 + 25 for straight and miter cuts. - Automatic adjustment for miter cuts with two different edge thicknesses (e.g. 0.4 and 1.2 mm) and for "edge overhang" for copying with edge thickness 1.0 - 3.0 mm. Automatic adjustment to the feed speed 20+30 m/min. Flush trimming unit 08.0555 - With 2 motors 1,850 W, 200 Hz, 12,000 RPM. Multi-function unit 08.353 - NC controlled with 2 motors, with automatic tooling for 4 profiles. Multi-profile edge trimming unit - with automatic tooling for 4 profiles via fixed-point control Spray nozzles, top and bottom - for applying cleaning agents Flat edge trimming unit Buffing unit - With 2 motors, each 180 W, 50 Hz, 1400 RPM. 1 Grooving unit - With 4.5 kW motor, 150 Hz, 9,000 RPM. - Horizontal and vertical adjustment manually with mechanical digital display - Pneumatic activation control - Manual swivel 90 Hfsdpfx Aozuyqijftol ICOS open - PC-based control system with integrated PLC and electronic path control. - User-friendly interface with Windows standards - Simple, component-oriented

Condition: excellent (used), maximum belt width 240 mm mechanical oscillation cast iron housing dimensions of the side table: 800x450 mm two motors, 4.5 kW each Hfedezmwddspfx Aftjl manual adjustment of the unit spacing

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Hfodpfxolikyde Aftjl Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 240 / 2500 Numerical Control PC 22 Adjustable feeding speed (m/min) 10 - 40 Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit 1 x Kw 4,5 (hydro) Hogging Units KD 11 (2 x Kw 8,1) hydro EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) A3 + A34 Edge coils support (No 6 reels) Band Pressure zone "C" Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit MF 20 (2 x Kw 0,55) 20° Corner Rounding unit (Contour Trimming) FF22 (4 x Kw 0,4) max 35 m/min Profile edge scraping unit PN 20 Finish processing unit (Glue scraper + Buffing unit) FA 11 Free space

Condition: used, machine/vehicle number: 007818, Type of edging: Thin edge, Thick edge Hodpfswu Ab Tox Aftofl Gluing System: EVA Hotmelt Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3000 mm Max feed speed: 40 m/min Operating Units Right Side: 12 nr Operating Units Left Side: 12 nr

Condition: good (used), Code: 0449 Brand: DE STEFANI Model: MV 1 Automatic single-head edge sander for wooden edges and profiles, solid wood, veneered and various Sander for profiles and rebates with interchangeable pad, tiltable -15° to +90° 2-speed motor rpm 710/1420 – Hp 1,3 – 2,5 Working height mm 100 Automatic feed with variable speed Hodszmyp Ajpfx Aftofl Adjustable inlet guide Compressed air 6 atm Exhaust outlet diameter 100 mm Overall dimensions mm 2100 x 1600 x 1350 h Weight kg 950

Condition: new, - new -- The edge sanding machine type SK-1 is perfect for sandinglarge, curved and straight workpiece edges.- The main application area of the SK 1 is the sanding of radii andshaped parts.- The sanding unit with its radii of 80 mm, 300 mm and1000 mm also has a straight sanding surface available.- The pneumatic, infinitely height-adjustable oscillation andthe heavy cast iron sanding unit ensure completesanding belt utilization and precise sanding results.- The generously designed revolving work table with itsintegrated extraction system enables the user to work easily andergonomically.- The SK-1 is equipped with pneumatic unit oscillationand pneumatic belt tensioningTechnical data:Motor power: 4 kWBelt speed: 15 m/illation stroke: 30-150 mmBelt length: 2700 mmBelt width: 150 mmTable size: 2000 × 1000 mmSpace requirement: 3000 × 1500 mmSuction: 1 x 140 mmWeight: approx. 560 kgArt. 1020-200000 Hjdpfx Asvyupuoftsfl

Condition: used, Second-hand machine Year of manufacture: 1988 Hfedpfozk Ny Eox Aftol Condition: well-maintained Features and technical specifications: - Length of work tables: 1440 mm - Total width of the two work tables: 710 mm - Tilt adjustment of the work tables: 0 – 30 degrees - Working pressure: 6 bar - Sanding belt length: 2170 mm - Sanding belt width: 150 mm - Sanding belt speed: 10–20 m/sec - Vertical adjustment of the oscillating unit: 125 mm - Air consumption: 25 NL/min - Electrical specifications: 400 V / 2.9 kW Weight: 490 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2013, Number of spindles 5 St. Working width 20 - 230 mm Working height 8 - 120 mm Length of the planing table 2500 mm Feed motor 1,1 kW Feed speed stufenlos regelbar 2-12 m/min. weight of the machine ca. 2500 kg Control MemoryPlus 1 WEINIG VARIOMAT Planing and Moulding Machine ----- Brief Summary: ----- - 5 spindles - Powerful motors - Cycle-controlled jointing - MemoryPlus control system - Option: Stähle-Hess Saturn single-piece sanding machine Technical Manufacturer's Description: ----- Working width: 20 – 230 mm Working height: 8 – 120 mm 1st Spindle: Horizontal Bottom ----- Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125 – 145 mm Axial adjustment range: 5 mm Rebating device incl. rebating cutters 2nd Spindle: Vertical Right ----- Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 93 – 232 mm Minimum tool diameter at fence level: 93 mm Maximum tool diameter behind fence level: 180 mm Maximum moulding depth: 45 mm Axial adjustment range: 30 mm Insert segment incl. additional fence lip: 125 mm Insert segment incl. additional fence lip: 150 mm 3rd Spindle: Vertical Left ----- Shared motor with 1st right spindle Diameter: 40 mm Shared speed with right spindle Tool cutting circle: 93 – 232 mm Maximum moulding depth: 45 mm Minimum moulding depth at 200 mm tool cutting circle: 20 mm Axial adjustment range below table: 30 mm Insert segment: 125 mm Insert segment: 150 mm 4th Spindle: Horizontal Top ----- Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125–200 mm Maximum rebate depth: 30 mm Minimum rebate depth (for tool cutting circle up to 200 mm): 20 mm Axial adjustment travel: 30 mm 5. Horizontal Bottom Spindle ----- Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125–200 mm Maximum rebate depth: 15 mm Axial adjustment travel: 10 mm Table plates with wooden inserts for the bottom spindle Additional outfeed plate above the bottom spindle for wooden inserts Feed System ----- Frequency-controlled feed: 1.1 kW, infinitely variable (2–12 m/min) Double-pendulum roller opposite the left spindle Axial adjustment travel of feed rollers opposite the left spindle: 35 mm Durofer-coated spiked feed rollers Pneumatic pressure for feed rollers (incl. water separator) Cycle-controlled jointing to support manual jointing. The infeed roller is released once the second feed roller has engaged the workpiece. After the workpiece clears the second feed roller, the infeed roller returns to its starting position for the next workpiece. Additional Features: ----- MemorPLUS Control System Width and height adjustment via controls (Spindles 3 and 4: radial CNC-axis controlled) ----- Hedpfx Afoy Spvfotsfl Price for the above-mentioned machine available upon request! ----- OPTIONAL ADD-ON (at extra cost) — Stähle-Hess Saturn #7008: Machine previously used in conjunction with the Stähle-Hess Saturn Duo Single-P...

Condition: used, machine/vehicle number: 007809, Type of edging: Thin edge, Thick edge, Solid wood Hfodpfsyhbn Djx Aftol Gluing System: EVA Hotmelt, PUR Combination Squaring Edgebanding Machine: First Pass Max Panel Width: 1200 mm Max feed speed: 40 m/min Operating Units Right Side: 8 nr Operating Units Left Side: 8 nr

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, Brand: DMC Model: Europa 90 Year of manufacture: 1981 Tech. info: Roller abrasive belt motor: 15 HP - 2 poles Pad abrasive belt motor: 7,5 HP - 2 poles Conveyor belt motor: 1,5/0,8 - 4/8 poles Two feeding speeds: 7-14 m/min Roller abrasive belt speed: 21 m/sec Pad abrasive belt speed: 10 m/sec Roller abrasive belt length: 2200 mm Pad abrasive belt length: 2200 mm Roller and pad abrasive belt width: 950 mm Max. size of work-piece: 900 x ≠100 x > 200 mm Min. size of work-piece: 40 x ≠ 2 x 200 mm Min. operating pressure: 5,5 Atm Compressed air consumption: 300 l/min Hsderbyrpopfx Aftsfl Diameter of suction hood (roller belt): 200 mm Diameter of suction hood (pad belt): 200 mm Average speed of dust exhaust system: 25-30 m/sec volume of sucked air (roller belt hood): 3150 cu.m/h Volume of sucked air (pad belt hood): 3150 cu.m/h Overall size: 1675x1625xh=2096 mm Weight: 2030 kg Weight of the machine without pad: 1630 kg Stock no: 2001933

Condition: excellent (used), Double side Sizing & Edge banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 240 / 1000 Numerical Control / Software NC 21 / Homatic Adjustable feeding speed (m/min ) high speed 10 - 60 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units KD 10 (2 x Kw 6,6) Hfodpfeifnxxsx Aftel EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + A34 (high Speed package) Pressure zone Edge coils supporting unit (No. of reels) 2 Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit 2 x Kw 0,55 (0° - 30°) Finish processing unit (Glue scraper + Buffing unit) FA 11 Milling grooving unit UF11 (1 x Kw 4) 0°-90°

Condition: ready for operation (used), * Brand: Triman Hodpfeywml Iox Aftefl * Surface: length 3000 mm, width 1800 mm - 4 decks * Driving: 4 pieces vibration motors of each 3,2 kW * Screen opening: [] 10-6-4-2 mm * Capacity: 0-2 mm 55 t/h * Incl.: steel construction and vibrating chute.

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, total length: 4,200 mm, total width: 1,300 mm, total height: 2,200 mm, overall weight: 2,000 kg, input voltage: 380 V, grinding belt width: 80 mm, input frequency: 50 Hz, Direction of machining: from left to right. Hfedpfozz Rh Sex Aftjl Two belt sanding units with a traversing sanding pad (option to use profiled pads). Sanding units mounted on a cross column, with adjustable height, left/right positioning, and angle adjustment. Electronic system for adjusting the advance and retraction of the sanding pad, synchronized with the feed rate (changing the feed rate automatically adjusts the advance/retraction times of the pads). Adjustment of the pad pressure. Adjustment of the sanding belt tension. Oscillation of the sanding belt. Two sanding belt speeds. Max. sanding belt width: 80 mm. Feed rate is continuously adjustable using a variator. Pressure bar with pressure rollers (new pressure rollers). Additional lateral pressure.

Year of construction: 1961, condition: used, functionality: fully functional, machine/vehicle number: 15/15/61, VEB Ellma Double-ended tenoning machine - 1100, manufactured in 1961. Machine designation and size: KS Manufacturing number and year of construction: 15/15/61 Total weight: 5.55 t Wiring diagram: G1-106/1 Sp Wiring diagram code: Lp Voltage type: ~ Frequency: 50 Hz Hjdpfx Ajzavpgjftofl Operating voltage: 380 V Control voltage: 220 V Connected power: 15 kW Machine rated current: 28 A Auxiliary machine rated current: 2 A Time-delay fuse: 25 A The used double-ended tenoning machine is in working order; it was mainly used for precisely cutting door components to length. The electrical components have recently been replaced, including a new electrical panel, as well as the feed motor and speed control mechanism. The machine has 2 vertical saws and 8 milling cutters, including 2 horizontal saws.

Condition: used, Year of construction: 2021, functionality: fully functional, Felder/Hammer edge sanding machine HS 950 for edge, surface, and contour sanding in woodworking shops. Suitable for finishing workpiece edges, moldings, frames, and wood components. Key technical data - Machine type: Edge sanding machine / oscillating belt sander - Model: Hammer HS 950 / Felder HS 950; according to the inventory note, the model is not clearly identifiable. - Sanding belt dimensions: approx. 2515 x 150 mm - Sanding table length: approx. 950 mm - Sanding belt speed: approx. 17 m/s - Motor power: approx. 2.2 kW - Table height adjustment: approx. 0–150 mm - Sanding unit tilt: approx. 45°–90° or continuously adjustable up to 90° - Dust extraction port: approx. 120 mm - Dimensions: approx. 1540 x 530 x 1235 mm - Weight: approx. 165 kg Features Hfjdpfx Afsztxqfjtol - Switchable oscillation for a uniform sanding pattern and longer sanding belt life - A useful addition for clean edge processing and finishing work - Of interest for carpentry shops, training workshops, and woodworking shops No guarantee.

Year of construction: 2013, condition: ready for operation (used), An HGH lapping-blasting system is available. Internal dimensions X/Y/Z: 2x590mm/400mm/250mm, max. workpiece weight: 100kg, overall system dimensions X/Y/Z: approx. 1250mm/700mm/1500mm, transport dimensions X/Y/Z: approx. 1600mm/1000mm/1650mm, weight: approx. 120kg. Documentation available. An on-site inspection is possible. Hfsdpfx Aoxd Avteftsl

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 101780, total length: 4,300 mm, total width: 720 mm, total height: 1,390 mm, type of input current: three-phase, input voltage: 400 V, feed rate X-axis: 6 m/min, power: 8.4 kW (11.42 HP), We offer this used Rehnen KBA edge sanding machine, year of construction 2008. Manufacturer: Rehnen Model: KBA Year of Construction: 2008 Condition: used Category ID: 826 Type ID: 94 Hjdpoyvfwrefx Aftjfl Type: edge sanding machine Aggregates total: 5 Moulding aggregates: 2 Sanding aggregates: 3 Workpiece width min mm: 60 Workpiece thickness max mm: 90 Feedrate max m/min: 6 Aggregates oscillating: Yes Sanding belt: Yes Profile sanding pad: Yes Milling aggregate vertically scanning: Yes Stepless rotational speed control: Yes Clamping system: Upper pressure rolls Jump-in control: pneumatic CE marking: Yes Total connection kW 6,50 Required space LxWxH mm 4300x720x1390 Availability short-term, ex location customer! If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 1996, I sell the widebelt sanding machine OTT MEGA TR11, year 1996. Configuration: Hard rubber calibrationcylinder Combi unit rubber cylinder + pneumatic jumping pad with segment control. Working width 1100mm Elektronic working height adjustment with digital readout 3-160mm 1 Motor 11kW 2 Feeding speeds. Sensitive adjustment of pad position. Pneumatic adjustment of pad and cylinders pressure position. Condition LIKE NEW ! The machine was working only a few. Hfsdpfoywrzbjx Aftjl Available immediately.

Condition: ready for operation (used), Year of construction: 1989, grinding belt length: 2,600 mm, grinding belt width: 150 mm, space requirement width: 900 mm, space requirement length: 1,650 mm, Langzauner LZK 3/2 edge sanding machine motor power 2,2kW Belt dimension 2600 x 150 mm Belt speed 20m /sec Table dimensions 1000 x 350 mm Height adjustment 200 mm Weight 300 kg Hjdergpw Ajpfx Aftsfl Space requirement 1650 x 900 mm Sanding unit 45° tiltable Veneer sanding unit Oscillation Feed console year of construction 1989 Condition: fully functional

Condition: used, machine/vehicle number: 005637, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Combination Squaring Edgebanding Machine: First Pass Max Panel Width: 1300 mm Hjdpfxjvw Ev Hs Aftofl Max feed speed: 50 m/min Operating Units Right Side: 11 nr Operating Units Left Side: 12 nr

Condition: good (used), Year of construction: 1990, used brushing machine with wacuum table Hfedpfx Afsd Tanyotjl

Condition: new, Year of construction: 2026, KDP350 Cabinet Sandblasting Machine The KDP350 cabinet sandblasting machine is an efficient device designed for cleaning and surface treatment of metal components. It is dedicated to professional workshops, industrial plants, and refurbishment service centers. The 330-liter working chamber and two side doors with perimeter sealing provide convenient access to the working area and ensure dust-free operation. The machine is supplied with a DC15 cyclone dust extraction system, which effectively removes dust generated during the blasting process. The KDP350 is an ideal solution as a wheel sandblaster and for cleaning metal components requiring precise abrasive treatment. Main Advantages of the KDP350 Sandblaster Large working chamber – 330 liters of capacity allows processing larger components. Two side doors – located on the left and right side, making loading and handling of workpieces easier. Dust-free operation – thanks to sealing gaskets and dust extraction ports with diameters of Ø63 mm and Ø90 mm. Sandblasting gun with ceramic nozzles – 4 interchangeable tips (4, 5, 6, and 7 mm) provide precise blasting performance. Working area lighting – improves visibility and accuracy during operation. Protective gloves integrated into the cabinet – wear-resistant gloves protect the operator’s hands. Compatibility with various abrasives – including quartz sand, glass beads, silicon abrasive, emery, and plastic granulate. Precision, Efficiency, and Versatile Applications The KDP350 cabinet sandblaster is suitable for removing rust, paint, scale, and technological deposits from metal, steel, and aluminium surfaces. It is an excellent solution for sandblasting: aluminium and steel wheels, engine blocks, hinges, machine housings, and other components requiring precise abrasive surface treatment. Adjustable operating parameters, including pressure from 4–8 bar and air consumption of 400–700 l/min, allow the machine to be adapted to different materials and abrasive types. Dust Extraction System – DC15 Cyclone Extractor The KDP350 is supplied with a high-performance DC15 cyclone dust extraction system, which efficiently separates dust and fine particles generated during surface treatment. The integrated filter and flexible connecting hose provide comfortable and safe operation, maintaining cleanliness inside the cabinet and in the surrounding workspace. Thanks to cyclone filtration technology, filter service life is extended and the need for frequent replacement is reduced. Standard Equipment DC15 cyclone dust extractor with filter and hose 12 V fluorescent lamp (230 V power supply with switch) 2 integrated rubber protective gloves Sandblasting gun with 4 ceramic nozzles (sizes: 4, 5, 6, 7 mm) 4 protective films for the viewing window 2 dust extraction ports: Ø63 mm and Ø90 mm 2 side doors with perimeter sealing gaskets User manual in Polish Technical Specifications – KDP350 Sandblasting Cabinet Parameter Specification Working volume 330 L (0.33 m³) Operating pressure 4–8 bar Air consumption 400–700 l/min Air connection 1/4" quick coupling Viewing window area 580 × 270 mm Doors 2 pcs. (left and right side) Dust extraction connection Ø63 mm and Ø90 mm Hfsdpfx Afjw H N R Sstol Internal dimensions 890 × 655 × 360/610 mm External dimensions 960 × 720 × 1500 mm Weight 88 kg Note: The machine is supplied in parts and requires self-assembly according to the included instructions.