Used Albach Wood Chipper for sale (6,255)

Year of construction: 2018, condition: excellent (used), From 2018, 15 kW, with hopper and container PM 32-E (32 m3) and tipping device Bdedpsyti Ipsfx Aprec

Condition: used, Year of construction: 1995, Technical details: punching pressure: 25 (250kN) t pass through width: 1800 (1660 nutzbar) mm daylight between the columns: max./min.: 155 / 25 mm Bodou Szfujpfx Apredc stroke: Stanzhub: 130 mm total power requirement: 5,0 kW weight of the machine ca.: 2,0 t Dimensions (LxWxH): 2,3 x 1,0 x 2,2 m Hydraulic trolley beam punch hydrl. pressure 250 bar Punching table area = 1830 x 500 mm Punching trolley/plate = 500 x 500 mm; travel speed = 800 mm/sec.; punching stroke = 63 mm/s, forward/return 125/125 mm/sec. Operation via control panel and pressure switch/control lever Equipment: 2x feed rollersØ 120 x 1630mm pneumatic close/open *

Condition: excellent (used), Catalogue number 7321 TECHNICAL DATA - Max workpiece height: 90 mm - Max workpiece width: 130 mm From above: - Sliding belt - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down) From below: - Feed belt - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down) From the side: - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down, front/back + angle) - Brush diameter: 220 mm - Stepless speed adjustment of sanding units via inverter - Stepless feed belt speed adjustment - Feed motor: 0.55 kW - Pull-out support table - Extraction port diameter: 3 × 120 mm - Overall dimensions (L/W/H): 2200 × 1200 × 1400 mm - Weight: 672 kg ADVANTAGES – Italian-made – 6 sanding units – Used sander – In very good condition Net price: 22,900 PLN Net price: 5,450 EUR (based on exchange rate of 4.2 EUR) Bsdpjy Tkhxofx Aprjdc (Prices may vary according to larger exchange rate fluctuations)

Condition: good (used), axle configuration: 3 axles, first registration: 03/2021, loading space length: 13,600 mm, loading space width: 2,460 mm, loading space height: 2,830 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,050 mm, suspension: air, tire size: 385/55R22,5, color: other, Year of construction: 2021, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Tare weight: 8070 kg, Gross vehicle weight: 43000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body construction year: 2021, Axle type: SAF, MEGA DOUBLE DECK // HARD WOOD FLOOR // SAF DISC BRAKES / LIFTING AXLE = Further Information = General Information Cab: Day cab License plate: KLEYN1 Powertrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 385/55R22.5 Brakes: Disc brakes Suspension: Air suspension Bodpfx Apey Irnvjrjdc Axle 1: Lifting axle; Tire tread depth left: 6 mm; Tire tread depth right: 4 mm Axle 2: Tire tread depth left: 12 mm; Tire tread depth right: 11 mm Axle 3: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Weights Unladen weight: 8,070 kg Payload: 34,930 kg GVW: 43,000 kg Environment Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damage: none Financial Information Leasing price: 353 € per month (default, 60 months); Ask for more information and conditions = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: used, Year of construction: 1997, functionality: fully functional, total length: 11,000 mm, RAPID Maschinenbau, TYPE: RSE, SERIES 1005, YEAR 1997 Operational. Used for cutting timber frame components and simple roof truss elements. -Horizontal swivel range from 15° left to 15° right, indicated on a display. -Vertical swivel range from 40° left to 90° right, indicated on a display. -Right-hand length stop, indicated on a display. -Documentation in German, including instructions on how to calibrate and reset. -Two-hand operation. -2 vertical clamping cylinders + 2 horizontal clamping cylinders. -Left roller conveyor, approximately 4000 mm long. -Right roller conveyor, approximately 6500 mm long. -Minimum operating air pressure: 6.5 bar. Bdjdoy Exxvepfx Aprsc +Additionally, an industrial filter system EUROPAC CT-101, year 2008, is included. -The red box shown in the photo is not included. youtube.com/shorts/pj_alOG0Xpo?si=MLVmkJXTL_xWzoif Please feel free to ask any questions or inquire about the price.

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Bdodpfou R Sxxox Aprjc Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: excellent (used), Bruks 602 CS Drum Chipper - Inlet opening size: 540 x 300 mm - Drum diameter: 600 mm - Number of knives: 2 - Maximum wood thickness: 180/100 mm - Main motor power: 26 kW - Fan motor power: 11 kW - Capacity: up to 20 m³ of chips/hour Bdsdpfxexmbido Aprsc - Standard chip length: 20-35 mm - Net weight: 1400 kg - Manufacturer: BRUKS (Sweden) Condition: tested, in working condition Conveyors are also available

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, Vecoplan VTH 55/25/5 industrial shredder for sale! - shaking table - metal detector Bdedpfey Ui Tcsx Aprec - switchgear cabinet - approx. 20 pairs of blades - spare screen - 75 kW main motor Feel free to contact us if you have any questions!

Condition: good (used), 6 Pcs “Smulders” for Sale Manufacturer: Smulders Waste Technology – 5 Pcs. with 200mm. wide Stainless steel belt. Bodpfx Aey Um N Usprjdc – 1 Pc. with 400mm. wide Stainless steel belt. Also air blowers in stock.

Condition: excellent (used), Catalogue number: 7924 TECHNICAL DATA hopper top opening (L/W): 500x600 mm hopper length: 2070 mm shaft width: 550 mm motor: 55 kW number of knives: 4 pcs Bdjdpfxey R Dq Ij Aprsc outlet for shredded wood: rectangular 560/360 mm dimensions (L/W/H): 3950x1520x2820 mm weight approx.: 2500 kg – drum chipper – 4 knives on the shaft – additional built-in fan for chip discharge – condition: very good – used chipper Net price: 23,900 PLN Net price: 5,690 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7620 Bdjdoy R Az Sepfx Aprsc TECHNICAL DATA - shaft width: 410 mm - table length: 2220 mm - cast iron tables - both tables adjustable - original cast iron fence - motor approx. 3kW - dimensions (L/W/H): 2220x800x1140 mm - weight: 504 kg ADVANTAGES – German-made – used jointer – in very good condition Net price: 6900 PLN Net price: 1640 EUR based on 4.2 EUR rate (Prices may vary with significant exchange rate fluctuations)

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 11 kW (14.96 HP), overall weight: 1,000 kg, total length: 1,750 mm, total width: 1,100 mm, total height: 1,640 mm, working width: 510 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 12, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 510 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Material Shredder Chipper Wood Shredder MHR510 ecoline The MHR ecoline series are robust and energy-efficient wood shredding machines, designed for reliable continuous operation in commercial environments. These plug-and-play shredders impress with their high performance, low energy consumption, and excellent cost-effectiveness. This makes the chippers ideal for craft businesses, recycling companies, and woodworking shops looking for an economical yet powerful solution. Bedpfxezba T Se Aprodc Advantages - Continuous, consistent shredding process - High performance with low energy consumption - Robust construction - Larger feed opening - Excellent price-performance ratio - Plug-and-play (5-pin CEE plug, 400V, 32A three-phase) - Siemens PLC controlled - MHR510 ecoline Rößler Material Shredder "Made in Germany"

Condition: new, Year of construction: 2025, The ideal machine for shredding hardwood and softwood Another machine now available (ex-works Neckartailfingen). Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blades: 14+2 pieces, 40x40mm, reversible multiple times, Rotor diameter: 260 mm, Control system: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume approx. 0.6 cbm, Hydraulically operated pusher Screen perforation of your choice (12 - 40mm) Extraction socket Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm The following options are available at an additional cost: - Additional row of knives + €1,990 net (28 instead of 14) - Surcharge for segmented floor, 4-sided + €2,170 net (prevents the pusher from jamming. Recommended for materials with a thickness of less than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control system for the conveyor belt and overband magnet + €2,750 net (start and stop synchronized with the shredder) - Special bearing + €1,540 net (rarely required. Closed, even more robust rotor bearing. May be considered for screens smaller than 15 mm or high fine content. Not necessary if bearings are greased approximately every 2 weeks in operation) Requirements for raw material: - The moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. increase wear. We are happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight company and we will document the test with photos and videos. Bdsdpfx Ajd E R D Ssprec

Condition: new, Year of construction: 2024, production time appr. 4 months * for suction perception, see picture 4 and 5 Tariff number: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling, Bedpjd Hkqhjfx Aprodc Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knife: 76 pieces, rotatable Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control: PLC Siemens S7-1200 Funnel opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 square meters hydraulically operated slide Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm Turbo coupling Included as standard: - V-rotor for other throughput - 2nd row of knives on the rotor - Control cabinet with Siemens PLC control - automatic star / delta start - fast hydraulics - Automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - Clock control to avoid idle times - Performance-increasing step control of the hydraulic slide - Pertinax guides for hydraulic slides - anti-vibration machine feet - CE conformity The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer Recognition from the raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. Interests to interests wear

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Bsdpfx Apex Twcporedc

Condition: new, Year of construction: 2026, CORMAK LUP10T 10T 400V Log Splitter The compact vertical hydraulic CORMAK LUP10T is a new addition to the range, designed for efficient splitting of firewood and heating wood. The machine offers a splitting force of 10 tons, a 4 kW motor, and 400 V power supply, making it ideal for working with logs of various diameters and lengths. 🟠 Technical Specifications Model: CORMAK LUP10T Type: Vertical hydraulic log splitter Splitting force: approx. 10 tons Power supply: 400 V Motor power: 4 kW Maximum height: 1700 mm Minimum height: 1300 mm Width: 630 mm Depth: 900 mm Wedge depth: 180 mm Maximum log length: 650 mm Minimum log length: 150 mm Maximum log diameter: 450 mm Minimum log diameter: 80 mm Wheels: Rubber wheels Weight: 153 kg 10 tons of splitting force in a compact design — more powerful than typical 8T splitters while still easy to store and transport. 🔴 High Power in a Compact Design The biggest advantage of the CORMAK LUP10T is the combination of high splitting force and compact construction. The splitter features an adjustable working height ranging from 1300 to 1700 mm and base dimensions of 630 × 900 mm, making it easier to position, store, and transport. Despite offering greater force than standard 8-ton models, the design remains compact and user-friendly. Key Advantages ➡️ Approx. 10 tons of splitting force: efficient splitting of larger and harder logs ➡️ Compact design: easier storage and comfortable operation in limited spaces ➡️ 4 kW motor: stable performance when working with demanding materials ➡️ 400 V power supply: well suited for more intensive workshop and farm use ➡️ Maximum log diameter of 450 mm: capable of handling large firewood logs ➡️ Maximum log length of 650 mm: convenient preparation of standard fireplace and heating wood ➡️ Rubber transport wheels: easier machine mobility ➡️ Weight of 153 kg: high stability during operation Choose greater power in a compact form. Select the CORMAK LUP10T and prepare wood more conveniently, efficiently, and with less effort. Benefits of Using the Log Splitter ➡️ Approx. 10 tons of splitting force: effective splitting of larger and harder logs ➡️ 4 kW motor: stable operation with demanding wood types Bdedpfx Asy T E Iyeprsc ➡️ 400 V power supply: an excellent solution for intensive work on farms, in workshops, or around the home ➡️ Maximum log diameter of 450 mm: suitable for processing large pieces of firewood ➡️ Maximum log length of 650 mm: convenient preparation of wood for fireplaces, stoves, or boilers ➡️ Compact construction: easier storage and comfortable use in limited spaces ➡️ Rubber transport wheels: smoother repositioning of the machine in the workplace ➡️ Weight of 153 kg: excellent stability while splitting wood ➡️ Less effort than using an axe: more comfortable firewood preparation without heavy physical strain Choose high power in a compact form. Select the CORMAK LUP10T and prepare wood faster, more comfortably, and with less effort.

Condition: new, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 380 V, Small wood chipper, manufactured in Denmark, is new. Bdedpfsza U Emex Aprec

Condition: used, Filter system, extraction unit, clean-air extraction unit SCHUKO type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Fan type S 140 / 0 / S1 Serial no. Year of manufacture 12 / 2004 Bodpfx Aper R Ewlerodc Nominal air flow 1,451 m³/h Negative pressure 1,398 Pa Filter area 18 m² Extraction connection Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Power supply 400 Volt, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1,500 mm) - Mechanical filter cleaning via vibratory motor - 2 discharge pipes at the bottom for dust collection bags, each Ø 500 mm reduced to Ø 300 mm - Dry extinguishing line with C-hose connection, fire department connection in case of filter fire - Differential pressure switch for filter contamination detection - Without control system (no control system present) - Mounted on 4 steel pipe legs (square tube 40x40 mm) Overall height as shown in pictures: 3,050 mm Space requirement L x W: 1,850 x 1,000 mm Weight approx. 400 kg Very good condition Ideal for wood dust, wood chips, plastic dust or plastic chips.

Year of construction: 2021, condition: new, functionality: fully functional, A used one is for sale Felder Milling machine F-900 Z with tenoning and slotting table length 1300mm The machine is inot used at all and therefore in mint (new) condition. Technical data: - 5 milling speeds - Milling spindle swivels 90° - 45° - Milling stop for tools up to Ø 230mm Bsdpfsy Iyvnsx Aprsdc - Multi-adjustment system - Tapping and slotting table 1300mm - electrically height-adjustable + swiveling "PowerDrive" - Engine power 7,3kW SD start

Condition: good (used), Year of construction: 1982, functionality: fully functional, Table dimensions: 1400 x 1000 mm Table rotates from 0 to 360 degrees Spindle taper: ISO40 Spindle swivels Minimum spindle speed: 90 rpm Bodey Iwf Hjpfx Aprjdc Maximum spindle speed: 2880 rpm Machine height: 3260 mm Machine length: 2650 mm Machine width: 2600 mm Machine weight: 5100 kg Accessories, equipment: - Built-in rotary table - Rapid traverse - Motorized height adjustment - Machine light The machine is in very good condition.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, Full trimmer saw - 21 sawblades, trimmer speed 110-130 pcs/min, dismantled, stored, was in use in green sorting line Bdodpfxew S Eylo Aprsc

Condition: new, Year of construction: 2025, functionality: fully functional, Chipper heads for chipper canter sawmachine R200, 250 Bedpfsx I Skdex Apredc

Condition: reconditioned (used), functionality: fully functional, empty load weight: 2,400 kg, Compact sawing machine with mechanical centering infeed, el.motors 2x75 kW and 2x90 kW, machine can be equipped with edging block and electric-operating cabinet with frequency converters TECHNICAL DETAILS Top diameter: 80-230 mm Maximum log diameter: 350 mm Minimum log length: 2.4 m Cant height in Chipper Canter: 60-232 mm Cant width in Chipper Canter: 70-210 mm Line speed: 70-150 m/min Chip length: 20-30 mm Bdodpfxsxfrmwe Aprjc

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, Bruks 700 / 400 Chipper Year of manufacture: 2004 Condition: perfect, refurbished Technical data: * Main electric motor power: 130 kW * Number of knives in the rotor: 3 pcs Bdjdpfx Apey T Sn Herec * Infeed material size: 700 / 400 mm * Vibrating feeder length: 40 m * Outfeed conveyor length, inclined: 20 m * Number of feed rollers: 12 pcs – lower: 9 pcs, upper: 3 pcs * Weight of the chipper including feeder and outfeed conveyor: approx. 30 tons

Condition: defective spare-parts repository (used), Year of construction: 1995, Shredder, make Weima WL 14, with fire damage – for dismantling or refurbishment. The following parts can still be used: base frame with hopper and drawer, rotor with gearbox, discharge screw, perforated screen. All other components must be replaced. Bjdpfxsy Aryue Aprsdc