Chipper heads

R200, 250 chipper heads

Condition: ready for operation (used), Tilt destacking for layer separation Stacking lath separator with conveyor belt Layer transport to the layer buffer Layer buffer with separation before feeding unit Bljdpfx Asuzht Tjfhec Layer patterns for the two separated timbers including transfer belts, for example to the stacking machine

Condition: like new (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain to finger-jointing press (foldable) Bljdpfx Afjwclkyshsc - Drying paternoster (approx. 7 m, board length up to 6 m) - Cutting and zero-cutting saw - Conveyor belt for waste wood disposal - Stacking machine - Strip magazine not for sale - Package cross conveyor The machine is in very good condition and has had very little use. The machine is still assembled but available immediately.

Condition: good (used), Year of construction: 1993, Vecoplan drum chipper VTH 75 / 22 / 5. Infeed dimensions: width 750 mm, height 220 mm. Motor: 75 kW. Bodoxr Tp Hepfx Afholc

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, The machine is currently in use. We offer live demonstration, dismantling loading, installation and training on your site Bjdpfx Aov Uab Esfhslc

Condition: good (used), Year of construction: 2001, I sell the 3-axis CNC working centre HOLZ-HER UNI-MASTER 7226 with beam table Bljdpfxji U Dxuj Afhoc Year 2001. Configuration: 3-axis main spindle recently full reconditioned / Water cooled Tool magazine 6 positions HSK63 on working head 1 grooving saw X-direction Drilling head 16+4 spindles Useful working area 3100x1360mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Holzher software controller with full instructions. 2x Pump SIEMENS ELMO-L S22 2,35KW. Good condition. Available immediately.

Condition: good (used), Year of construction: 2008, La Meccanica CLM 800 POR Granulator The machine has no door It worked on a cake Blsdpfxswdawqo Afhsc

Year of construction: 2000, condition: good (used), EWD Combimes edging line. Year of manufacture: 2000, type DK90-TL. Timber feed from the left. Maximum edging width 500 mm, maximum edging thickness 120 mm. 90 kW drive motor. Cycle rate with 4.0 m wood length approx. 18 pieces/min. Complete with original EWD control system. Delivery from the accumulation conveyor before singling through to the sliver separator included. The line is complete and in good condition. Blsdjxcwvxjpfx Afhjc

Year of construction: 1998, condition: excellent (used), functionality: fully functional, Very stable creel roller conveyor with hydraulic lift and lowering cross conveyor. 1st part: Length 7,100 mm. Roller length 2,000 mm. Roller diameter 220 mm. Overall height 1,000 mm. Built-in hydraulic lifting and lowering cross conveyor With 4 chain strands. Spacing: 1,500 - 1,300 - 1,000 mm. Fully plated. Bljdpot Hg Hujfx Afhsc Hydraulic model support rollers. Drive via geared motor. New bearings. 2nd part: Length 7,200 mm. Roller length 1,600 mm. Conveyor length 6,100 mm. Built-in hydraulic lifting and lowering cross conveyor with 6 chain strands. Unsupported, it is possible to convey the cut material under the roller conveyor to the left or right. Fully plated. Including hydraulic unit for both roller conveyors.

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Bljdpfx Aow Sy T Hsfhec Storage location: Nattheim

Condition: good (used), functionality: fully functional, Complete Weinig planing line consisting of: Package intake. Automatic de-stacking of packages. Batten separation. Blsdpfewvqvbjx Afhsc Cross conveyor with reject sorting. Feed to twin band saw. Singling out before the planing machine infeed. Through-feed crosscut saw. Infeed to the planing machine. Weinig 22 B planer with 8 spindles. Electronic feed with frequency converter up to 80 m/min. In 2023, the planer was equipped with a new frequency-controlled feed, new table, and new wear plates. Outfeed from the planer. Weinig stacking system with batten magazine. Also Almab stacking system. The planing line is fully mechanized. Specifications: Wood length from 2 to 6.10 m. Wood thickness from 10 to 120 mm. Wood width from 40 to 220 mm. Package size input: 1.20 x 1.30 m. Output: 1.20 x 1.20 m (W x H). Well-maintained system. Regular servicing.